ADSL and cable

Similar Questions

• What is the difference between the external SCSI cables and cables data acquisition

  Hi all, I would like to make a simple extension using an external SCSI cable and a NOR 184749/SH 6868. In other words, it would be: female HD68 bolt of the cable ends OR coupled to an external SCSI HD 68 male with a VHDCI 68 male cable. What are the differences between the external SCSI cables and cables as the (M) 6868EP of the CHS data acquisition. Other than the sex of the end of HD68 is usually on one. How is the posting hit buy using an external SCSI cable for an extension to tell a BNC-2090?

  Yes, I realize that NEITHER wants us to buy their cable, but in these economic times difficult, to do use all available resources, so I have to try,.

  Thank you

  joelowwatt

  Hello

  As long as you have compatible connectors, SCSI cables will work DAQ of basic functions.  They have the advantage of NO cables is that we can meet our DAQ hardware.  So, we can create pairs twisted differential pairs to HAVE, using the ground for shielding terminals and generally specialize the cable to minimize noise and crosstalk.  Because the SCSI cables are not specialized, you are likely to see the most noise and, if you go the sampling rates more Rapids, crosstalk.  If you are in a laboratory or factory with a good amount of noise EMF that your readings are not quite as clean, or if you have fluorescent lights you might see 60 Hz noise you might not see otherwise.

  If you want more details on the specifications of the SH68-68-EPM cable, I recommend these two articles.  The first example of the twisted pair and the principles of the SH cable shielding and the second gives the most precise specifications that you can compare with when looking for a SCSI cable.

  3GRD4C33 Knowledge Base: mapping list of the sons of SHC68-68-EPM & SH68-68-EPM cable

  1TGEHPDM knowledge base: detailed specifications for the SH68-68-EP cable

  Kind regards

• Their is something stuck on my port of lightning and cable does not fit on my phone solutions please?

  The cable does not fit on my phone because it is stuck on the port of lightning

  6 iPhne

  Download the right cable before you damage your product and void the warranty.

  http://www.Apple.com/shop/iPhone/iPhone-accessories/power-cables

• Time Capsule do not pick up address DHCP and cable modem...

  You just bought a Time Capsule and a couple of Airport Express. If none of these devices are connected together via Ethernet, they seem to have set themselves up, and all is well.

  That being said, I tried to create a mobile network instead of pure wi - fi and am studying various behaviors that are not as expected when I rear hub to the Internet Time Capsule, but need to isolate and go 1 bit at a time... (it works not as well as suggest Apple instructions on homelessness of installation)...

  If:

  1. configuration of the modem cable shows that DHCP is 'ON' and supplied address range 192.168.0.x by 192.168.0.y,.

  2 Cable modem wireless is disabled,

  3 Time Capsule Wan is connected to the cable modem, Ethernet

  4 Time Capsule is configured to request its address IP, DHCP

  5. Airport Express is in Bridge mode and have addresses such as 10.x.y.z (appears to be from a Time capsule).

  6. safe as Time Capsule is set to be as DHCP and NAT

  7. There is NO other device in this configuration connected by Ethernet except the cable Modem and the Time Capsule.

  So, why is the IP address of the time Capsule 76.181.45.xyz? (The address is NOT in the range of the DHCP as described in the #1; it is not supposed to be?) ....

  Whence this address?

  A friend says this address puts the "other side" Time Capsule of the cable Modem, directly on the Net?... (Shouldn't worry?) ....

  If none of these devices are connected together via Ethernet, they seem to have set themselves up, and all is well.

  It's because you didn't have the devices connected via Ethernet before you set up the. Given that the installation utility saw a wireless connection, it is assumed that this was the way that you want to connect devices on your network at all times... so he put it this way.

  If you had an established connection Ethernet before you ran the installer, then the utility would have detected this connection and set up the airport to "expand using Ethernet", does not extend to assistance of wireless.

  (it works not as well as suggest Apple instructions on homelessness of installation)...

  If all goes well, you don't talk about this document... Wi - Fi base stations: extend the reach of your network wireless by adding additional base stations Wi - Fi - Apple Suppo... .. Since the 'how' information in this article is at least 4 years late, bear little resemblance to the latest version of AirPort Utility and some of the information are simply not true.  This document if trash is what you... He'll probably do more harm than good with regard to the details of setting.  The article is OK for basic general information, however.

  6. safe as Time Capsule is set to be as DHCP and NAT

  It should not be if your modem is a modem/router "" or type 'bridge' of the device which is also DHCP and NAT services. The fact that you have disabled the wireless on the device confirms that it is both a modem AND a router. That being the case, then you have two devices that both struggling among themselves to try to control the same network... AND do you also have a network error called Double NAT... something you don't want.

  Probably the best at everything again and provide us with the number of brand and model of your "modem", that we can confirm what it is that you have, then the correctly configured time Capsule to work with this device. Once the time Capsule is set up correctly, it will be easy to put in place the other airports.

• I have 2nd gen and cable provider ATV...

  I have ATV 2nd generation and the cable operator with lots of channels such as hbo, nick, etc. How can I watch shows from these channels using my ATV thanks

  This is a basic form of the app to the app, content providers. It has very little to do with your cable provider.

  IE things like CBS App offer broadcasts, but HBO NOW, I do not think this offer.

  While some applications may require that you connect with your account of cable television, this does not mean options Live are available.

  Live, you have your cable subscription and their box. Apple Tv is usually for on-demand playback, and do not have all of them live Tv stream options of programming.

• Where to buy the video and cable and antenna for Qosmio F30 adapter?

  Salvation on a trip I lost the software plug-in component video cable and antenna adapter provided with my Qosmio laptop.
  Anyone know where I can get replacement cables for?

  Hello

  Google a bit on the net. You will find many online shops that offer these cables. Yor need a simple cable S-video and composite-antenna adapter.
  Another possibility is to buy cable equipment Qosmio Toshiba service partner in your country.

• Availability and cable modem router compatible French

  I'm looking to go from DSL to fiber in France on Orange ISP.

  I was wondering if I could buy Netgear equipment to run instead of the orange crap stuff they force us to use!

  I HATE the ISP devices, they are devices of sagemcom in desguise and break every year!

  Hello aalexandrebeta

  Ask if they take over the client property of modems and if so what is recommended also ensure that it is a coaxial cable connection they use.

  DarrenM

• Details of the 536304-001 HP Power On / Off switch and cable LED Assembly for the Z400

  Can someone help me with the P5 front header pinout on the motherboard Z400 or on the HP 536304-001 power switch and LED to the Z400 Cable Assembly?   I'm getting to is a Z400 motherboard in a case of XW8000. I know that 536304-001 does not fit in the case of XW8000 but the XW8000 part equivalent seems to have mostly the same connections. double color led, led hard drive, power button / stop.   I can see an illustration that 536304-001 use 4 connections on the side to key of header and 2 on the other. Cable colors are red, green, black and 3 white. There are also other connections to the temperature thermistor that I would not intend to use (unless explicitly required for Z400 motherboard).

  Here's a panel header pinout before Z400 P5 motherboard:

  

  Find "missing" pin key 14 to steer this diagram properly.

  Pins 2 and 4 go to the power LED.  This LED is two-way, with green in a sense (normal) and Red (diagnosis failure) in the other.  If the LEDs back to back are installed between pins 2 and 4, on lights.  If green it does not illuminate during normal operation, move the pins to the pair of diodes.

  Pins at 15, 17 and 18 are chassis ID pins.  It's OK to let those pins unconnected.

  Pins 6 and 8 are the power button pins.  Connect a normally open push switch between pins 6 and 8.  Do not attach any tension or Chin-ups to this switch.

  RESET # may not work, but it is a prototye signal.  A switch push-button normally open between pin 7 and 6 (GND) could make it work.  It's OK to let those pins unconnected.

  Terminals 11 and 12 are the thermal diode in the panel cable Assembly before Z400.  The system starts without the thermal diode, but fans can operate at full speed all the time, or may oscillate in speed (several times to go from slow to high-speed and back).  This will make the system very noisy.

• Optical digital work on the DVD and cable, but NOT on Youtube, Amazon Prime or applications.

  Just bought XBR65x850C. hung out on TV to stereo receiver digital optical cable. Works very well for cable and DVD player, but NO sound when I try to watch any application like Youtube, Amazon Prime, etc.. If I change to 'Speakers TV', I hear. I have I something wrong, or is this a bug? Is there a ' cheat around "such as the use of the stereo headphone jack? Thanks for any info.

  After reviewing all possible problems and opportunities, I found that the problem has been resolved by going to audio; Advanced; and optical audio output digital changinig; "Max". This enabled audio on all applications. Thank you.

• Network connection wireless and cable - Internet access that allows on a computer that is connected to the network cable connection to a networked computer

  I have 3 desktop PCs. Machine A is Win 7, the B machine is XP, the C machine is XP.

  Machine A is connected to the router via cable and internet connection works. Machine B is wireless (the same router as a machine) and the internet connection works when I used that machine has b. Now I plugged in the machine C B machine with a crossover cable and wireless internet machine B does not work.

  I tried the IP and gateway addresses manually (since deleted). If I ping the computer A to B I get the answer to time to stop and even if I ping the B to A computer. However ping computer B to C and C to B work.

  I hope that I have omitted some important parameter, if anyone can point me in the right direction

  Hello

  If the bridge, the connection between C and B is the first to be configured with a static IP address that is on a different subnet * and then fill.

  Alternatively, you can use ICS, http://support.microsoft.com/kb/306126/en-us

  * On the subnet

  Classical IP looks like this (example), 192.168. 1 .x the first three groups are also called subnet, they identify specific network, x can be a number between 0 and 255 and it identifies each unique device on the network.

  An IP address of 192.168. 2 .x would be a subnet to another network.

  To assign a static IP address, see http://www.howtogeek.com/howto/19249/how-to-assign-a-static-ip-address-in-xp-vista-or-windows-7/

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• WAG320N and cable modem connection

  I have a small question,

  You could point me to some reference material on my WAG320N configuration to use my modem cable via Ethernet 1 port. I saw that he mentioned it's possible, but I have been unable to me sorting.

  And before ask you, I put the DSL router that I move in the next 12 months and my new base will not have access to cable internet and I'll be going back to DSL.

  Thanks in advance,

  Phil

  Actually in this case your bad, but thank you for the quick response.

  After a few game, it seems that the WAG320N is specifically configured to configure Ethernet Port 1 WAN port and you can route all internet traffic through the modem cable via the WAN port, you just set up.

  If anyone is interested, then load up your routers page 192.168.1.1 default config.

  Click Setup

  - Ethernet

  Next to Ethernet connection: select the button labeled radio like Port WAN

  Most of the stand-alone cable modems will have a static IP address both under the list of connection

                           down box  Select the static IP address.

  Enter the IP address of your cable modem, subnet mask, gateway and DNS address by default. (These items must have all be supplied by your ISP)

  And finally click on Save settings at the bottom of the screen to validate your changes.

  Then connect to your WAG via the Ethernet switch or wireless connection and you should be good for surfing the web.

  I hope this helps someone else who tries to use a modem cable through the WAG320N or similar device.

• conflict between and cable h and 802. 11 b / g?

  Is there a conflict when a laptop has an active Ethernet cable connected and available wireless 802. 11b / g connection? If so, what technology would take over?

  Thank you.

  Hilarious. No network connectivity"is" based solely on the type of connection!

  It is a simple matter of the ip routing table ("netstat - rn") and which order you connect you and if an ip address is assigned, etc.

  For example, if you are using wireless network and then connect a wired cable to an active network and get a DHCP address, without disconnection of the wireless network, you will actually be connected to two networks. The default gateway (route 0.0.0.0/0 in the routing table) will have a metric is lower for the connection that came second, or the wired connection, which means that all traffic not intended for your local (directly connected) wireless network or cable network subnet will be sent to the default gateway of the cable network.

  I use it to my advantage in my consulting work using cell phone or wireless network comments for my route fault for my client VPN (etc.) works, while being able to print locally, etc. This isn't the safest way of doing things, but it works and answer your question, I hope...

• Problem with the Site to Site IPSec VPN using ADSL and PPPoE

  I have an IPSec site to Site VPN between a 2805 and an 1841. Both have fixed IP, but the end of 1841 uses a PPPoE and ADSL connection. The MTU that is displayed on the Dialer0 interface is 1454.

  I can get the packets through the Tunnel without problem (standard pings), but don't spend larger packages.

  Any suggestions?

  You can apply on both. Here's a URL that explain the problem of MTU and option in detail.

  http://www.Cisco.com/en/us/Tech/tk827/tk369/technologies_white_paper09186a00800d6979.shtml

  Kind regards

  Arul

  * Please Note If this can help *.

• Need help with my LAN adapter wireless and cable.

  After I installed Windows 7 I have experienced the following problem, connected my Acer Aspire 4736z laptop to the internet.

  After a long period of maintenance of the computer to be idle, eg.in standby or hybernation. the adapter LAN and Wifi Adapater is unable to detect. So I have to restart the computer to make it work. I tried updating the driver but it says that the system already has the latest software. but this happens every time the the computer to sleep and wakes up.

  the drivers for the hardware istalled are Atheros AR5B91 Wireless Network adapt and Atheros AR8121/AR8113/AR8114 PCI - E Ethernet Controller and Microsoft Virtual Wifi Miniport Adapter.

  Windows Network Diagnostics

  Problem encountered There might be a problem with the driver for the Wireless N...

  Detected configurecomplete wireless network adapter

  The wireless network adapter problemscompleted

  There might be a problem with the driver for the region...

  Detected configure the cable networkover the wired network adapter card problemscompleted

  Problems found

  <>There might be a problem with the driver for the wireless network connection card Windows could not automatically bind the Protocol IP on the network card stack.

  Detected

  Configure the wireless network adapter Configure the network adapter to communicate with the network. This ensures that the Internet Protocol Version 4 (TCP/IPv4) and Internet Protocol Version 6 (TCP/IPv6) can be used on the network adapter.

  <>There might be a problem with the driver for the connection to the Local network map Windows could not automatically bind the Protocol IP on the network card stack.

  Completed

  Network Diagnostics log file name: E86CD671-170C-42B3-B6F7-7DB88F9B6343. Repair.Admin.3.etl

  The wireless network adapter problems Windows Help and Support can provide more information about the resolution of driver or hardware problems.

  Completed

  Detected

  Set up the wired network adapter Configure the network adapter to communicate with the network. This ensures that the Internet Protocol Version 4 (TCP/IPv4) and Internet Protocol Version 6 (TCP/IPv6) can be used on the network adapter.

  Completed

  Network Diagnostics log file name: BFE9A7EC-918C-4453-B383-C45DEB6332D6. Repair.Admin.0.etl

  The wired network adapter problems Windows Help and Support can provide more information about the resolution of driver or hardware problems.

  the problem is solved, but I did not try anything. It seems he healed it self, can be via windows update something. Thank you guys

• Cisco. ADSL and 3G backup

  I need to set up a new site that will have an ADSL as main and 3G as the secondary. Both will have VPN to a router to the data center.

  Someone at - it a link to a document of terminology to configure it?

  http://www.problutions.com/?p=643

  http://www.problutions.com/?p=639

  Michael

  Please note all useful posts