ADT cannot enumerate connected iOS devices.

Similar Questions

• My pro iPad connects to the WIFI, but loses connectivity to drops in use.  My other IOS devices (iPhone, macbook, etc.) do not have this problem.  Ideas to solve?

  My pro iPad connects to the WIFI, but loses connectivity to drops in use.  My other IOS devices (iPhone, macbook, etc.) do not have this problem.  Ideas to solve?

  Hello BrooklynWM!

  I definitely want my iPad to stay connected to the Wi - Fi connection while I use it.  Thanks for posting that other iOS and OS X devices have no problem with the connectivity dropping.  We can try a few things.

  Would first go through the steps listed in this article: If your iPhone, iPad or iPod touch connects to a Wi-Fi - Apple Support Network

  Then if it does not help, you can check network settings with this: recommended for the WiFi routers and access - points Apple supported

  After trying those, if you still see the drop connectivity, make sure the iPad Pro is updated with iOS 9.3.2 and check to see if the connection when you are in a certain place, time, or one event happening elsewhere in the House.

  Best regards.

• NETGEAR D7000 - Mode Access Point - connection problems with iOS Devices

  Hello

  Having a problem with my Netgear D7000 in mode access point.

  My laptop (MacBook Pro) can successfully connect to WiFi and my PC connects fine cable using the D7000 as a switch.

  iOS devices, however, hurt that is to get or maintain a connection - even if they connect to and then some time later they will fall the network. Go to settings shows the client attempts to connect, but seems to be stuck with an assigned random IP (not on the subnet of law), no gateway by default, etc..

  iOS clients are an iPad 3, iPhone 5 & iPhone 5 c. All about the latest version of iOS.

  Other access points by train (Belkin, billion) that's fine.

  DHCP etc. everything is managed by my router which is a constant for all devices and access points - but I tried to change that, and he has not made a difference also.

  D7000 is on the latest firmware (v28), I tried to reset it and setting up from scratch, but no joy.

  Any ideas?

  Change the channel seems to resolved this problem.

• Why my iOS devices keep invites me to connect?

  My iOS devices will remain not connected to iCloud, I continue to be asked to enter my id

  Have you tried signing, reboot and then signing back again.

• Q10 Link BlackBerry BlackBerry cannot connect a device

  Hey all,.

  I have a problem recently where my BlackBerry link cannot be connected to my device.  When I connect my Q10 with computer it says: "cannot communicate with the device.  It shows that my phone is charging, however, and I don't understand why I can't sync music, videos, photos with my computer.  He worked last month, and now it seems that I can't do anything on the computer with my BlackBerry.

  Any ideas or solutions?

  Thanks in advance!

  Jim

  Hello and welcome to the community!

  Here's a knockout who deals with this error:

  • KB26745 BlackBerry Desktop Software or BlackBerry link displays the message "update failed" or "cannot communicate with the device" when connection to the 10 BlackBerry smartphone or BlackBerry PlayBook Tablet via USB

  I hope that it contains something useful! There are also several existing threads on this site, which discuss exact error... your opinion of those who may prove useful, and a search of this website, by using the error message, error code or symptom, should reveal all the existing threads that are applicable to you.

  Good luck and let us know!

• Unable to connect to the wireless network, Windows error cannot communicate with the device or the reaource (primary DNS server)

  Original title: internet connection problem

  Hey,.

  I use a wireless connection at home, it works very well in my android and apple gadget, but it does not work for my laptop. It is said:

  1. Windows cannot communicate with the device or the reaource (primary DNS server)

  2. the connection between the Internet and your access point, router or cable modem is broken

  3 problem with access point or wireless adapter

  I think it's an effects of virus or something?  Because yesterday it works really well. How can I fix? Thank you very much

  Hello Hildegard Lydia,

  You may experience this problem for a number of reasons. Some common problems that can cause these problems are: drivers damaged or incompatible, updates missing, network connection settings, hardware problems or software or TCP/IP can sometimes be damaged or corrupted.

  What is the brand and model of your computer?

  Please follow the steps mentioned below:

  Method 1: a component of the Internet connection on your computer is a package of instructions called TCP/IP. TCP/IP can sometimes become damaged or altered. If you can't connect to the Internet and you have tried all other methods to solve the problem, TCP/IP can be causing it.
  I suggest you try to reset the TCP/IP stack.
  http://support.Microsoft.com/kb/299357

  Method 2:

  I suggest that you refer to the following link:

  Why can't I find a wireless network?

  http://Windows.Microsoft.com/en-CA/Windows/cant-find-wireless-network#1TC=Windows-7

  Method 3:

  See the steps in the following link and check:

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-CA/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Please an update on the status of the issue to help you further.

• Failed to start Remote Access Connection Manager Service. Get the 20 error: the system cannot find the specified device.

  This seems to have started with the last batch of updates of Windows 7 (including SP1).
  I can't connect using dial-up.  Get the message:
  Cannot load the Remote Access Connection Manager service
  Error 711: The operation could not complete because it could not start the remote access connection manager service
  in time.  Please try the operation again.

  When I try to start the Remote Access Connection Manager service manually, I get the message:
  Windows could not start the service on Local computer remote access connection manager.
  20 error: the system cannot find the specified device.

  My phone displays the modem works properly, and telephony and the Secure Socket Tunneling Protocol service started.

  I don't know what else might have changed.

  Hello Vince_867,

  Thanks for your post.  Take a look at this thread for a possible solution to your problem.

  See you soon

• Fusion 6.0.2 - cannot connect virtual device sound

  Hello

  I recently updated my system to a new Mac Pro (MacPro6, 1 - coffee can style).

  I have a pair of speakers connected to the line out on the Mac Pro, and his works very well under OS X.

  I use VMware Fusion 6.0.2.

  However, I feel a particular sound problem in all my virtual machines of Windows.

  When I turn it on, I get a notice indicating:

  Cannot connect virtual device sound because no corresponding device is available on the host.

  You want to try to connect this virtual device whenever you turn on the virtual machine?

  
  

  No Yes

  
  

  
  

  If I click No., I wonder what is new in an infinite loop.

  If I click Yes, Windows starts and the sound works, except that it comes out of the internal speaker on the Mac Pro, rather than the speakers on the line output.

  I have several virtual machines of Windows (XP, Vista and 7), and this problem affects all the.

  VMWare tools is updated in all virtual machines.

  All of these machines were copied from my old Mac Pro, for testing, I decided to create a new virtual machine from scratch.

  I used Vista because I had this .iso at hand.

  At the end of the installation, after installation of the VMware tools and all the virutal machine had no noise.

  Windows has indicated that his material is installed and the windows volume meter shows visually playback of sounds (this small sound level meter), but there is no sound will appear.

  After cutting this new machine virtual and going in the settings, I noticed that he had missed at what soundcard put out of SERVICE.

  I turned on and when I turned it on I got the same message and the same problem as all other virtual machines.

  I also tried to edit the .vmx to show sound.virtualdev = 'es1371'but this disabled sound totally.

  
  

  I'm at the stage of ideas.

  
  

  For any help or suggestion would be appreciated!
  

  Most Macs have built in the input device, so they list a 'internal' microphone as the default selected the input device. The end of 2013 Mac Pro is not a built-in microphone, so by default, it will show "no input device found. VM Fusion 6.0.2 does not seem to take into account the case where there is no device found entry. I consider this a bug, but you can work around it by adding any input device. For example, the "headphone" in the back the Mac Pro is actually a pair of entry. If you connect a headset, as what is delivered with an iPhone, then it will be displayed as an input device and the merger will stop at throwing the error.

  I hope that VMware solves this problem in an update.

• How to sync contacts from iMac to iOS devices and air of Matchbox

  Cannot sync contacts between the iMac, macbook air and iOS devices. All with the latest updates.

  Please assoist

  Tony R

  You must explain what stops you to do, and what is your configuration. You have the same iCloud account connected to all devices and Macs? Do you have Contacts enabled in iCloud? Have you tried troubleshooting? If so, what have you tried?

  See you soon,.

  GB

• How to use iCloud for PC without an iOS device?

  I received an invitation to join a place to share photos of iCloud.  I'm not an Apple user, do not have an iOS device (or plan in the near future).

  I've created an Apple ID iCloud and have iCloud account.  I downloaded and installed iCloud for Windows on my PC.  However when I try to run the program and enter my Apple ID and password to connect, I get the following message:

  Unable to connect

  Your identifier Apple must serve to iCloud on an OS X device or an iOS to install before you can use iCloud for Windows.

  Is this to say that I can't access the iCloud photo sharing subscription since I did not have an iOS device to set up my account?  ICloud photos can be shared with users who have an iOS device to that?

  Thanks in advance.

  You can create an Apple on a Windows PC ID, but you cannot create an iCloud account - it is a separate additional process and unless you've been able to create one on a Mac or iOS device you don't have an iCloud account, only an Apple ID. This is why the error message you see.

  iCloud accounts are essentially positioned as a way for Mac/iOS users synchronize data from their devices and are a free service at the Starter level; the control panel is intended for users of Mac/iOS, which also happens to have a Windows PC. They are not intended for Windows users only. Unless you can find a way to set up a device to iCloud on a Mac or an iOS device, you will not be able to move forward.

  iCloud sharing photos can be configured as a public or private - the first are directly accessible in any web browser, but private sharing requires you to have iCloud account. If your source is not willing to set up a public share (that would be accessible to the world in general) you will not be able to access it without an iCloud account.

• is it possible to create something GarageBand for Mac and share with someone using an iOS device to be able to add and send it back?

  OK, here's the deal. I have a friend who is interested in working on musical ideas through GarageBand. He has an iPad Pro (not sure 1st or 2nd gen). and I use my 6 + or 1 Air iPad iPhone or a MacBook Pro. didn't matter that the one that I use because it can't open them with the iPad Pro, even if he sent it to me first. I am only able to open what it sends to my MacBook, although...

  Is this possible? Very convenient to add titles and the return device to added again and so on? One might think that these devices would be able to work this way with each other.

  Thank you

  GarageBand on an iOS device cannot open GarageBand for Mac projects, but a mac can open GarageBand compatible for iPhone/iPad projects.

  So, you might send your friend only mixed audio files. Your friend should add the sound to the Music.app on the iPad Pro and then add the new joint audio tracks in GarageBand. It is quite complicated, because you need to merge the titles added your friend in your original on the Mac project.

• My iPad cannot upgrade to iOS 10

  For months, I tried to update my iPad 2 Air iOS. He is currently on iOS 9.3.3. It may be a problem with my 9 Beta iOS software profile (which I uninstalled it a few days ago), but I'm not really sure. I have repeatedly "Unable to install Update" errors when I try to update over the air and sometimes my plant even iPad and restarts.

  I try to update via iTunes and iTunes tells me "this version of the iPad (9.3.3) software is the version current." when it obviously isn't. FYI, I use iTunes 12.5.1.21 on my iMac OS X Mavericks running.

  

  

  Hi C000L,

  I understand that you get an error when you try to update your iPad with either iTunes or live. I know it's important to have up-to-date software, so I'm happy to help you.

  You said that you had the beta version of iOS 9 installed. If the beta software is not properly updated to version, it can cause problems with update normally. Read this article on the management of software in version beta iOS on your iPhone:

  Any software beta iOS - Apple Support
  

  Download the final version of iOS

  If you have a beta version of iOS and you want to download the final version, follow these steps:

  1. Connect your device to iTunes.
  2. When your device is connected, force it to restart. Press and hold buttons sleep/wake and Home at the same time. Don't release when you see the Apple logo. Keep now until you see the Recovery Mode screen.
  3. When asked, choose updates to download and install the latest version of iOS nonbeta.
     An update installation does not affect your settings or content.

  Thank you for using communities Support from Apple. See you soon!

• Imports of my camera appear on all iOS devices.

  I have a single library in my Photos for Mac (MacBook Air) and I put it to automatically forward your photos to iCloud and my iOS devices (photo stream indicator is activated). That's fine when most of my photos is taken with my phone. However, I recently downloaded ~ 1000 photos of my DSLR camera and they take a lot of space on my Mac and now also showed on my phone! What I want to do is to download my photos from digital SLR camera in the Photos app to work on a project, store them on iCloud, but they don't appear on my phone. How should I do? Is it better to create a different library in pictures and there no sync for my iOS devices? I had no such problem with iPhoto because only the photos from my iPhone were download of Photo Stream (rather than 2-way streaming). As to the issue of space I had stored my iPhoto on an external device library. I'm just trying to understand how best to manage this problem in Photos for Mac.

  You can have a library that is enabled for iCloud on your Mac, if you activate my Phto Stream for this library to download from your iiPhone, it will be 2-way and also download on the iPhone.

  If you want to only download from the iPhone, do not use y Photo Stream, but download by connecting the iPhone to a USB port.

• This cable or accessory is not certified popup while not connected iOS 9.3.4

  I've updated to 9.3.4 iOS on my iPhone 6 more this morning. Now, this afternoon, I get a popup every few minutes saying "this cable or accessory is not certified and may not work reliably with this iPhone." I'm not connected to a cable or accessory. Support Apple advises to do a hard reset, which I did. After a few minutes I received once again the context menu. Not plugged into anything.

  Never received that message before today. The only thing I know that has changed is the software update 9.3.4 (G 13, 35).

  Similar experiences please mark as I have this issue too. I saw another post here, a user with an iPhone 5 with this exactly the same problem.

  Kind regards

  Charles Cavanaugh

  Hi ccphd,

  I understand that you get an error that the accessory is not certified, despite not having anything that is connected to your iPhone. I know it's important to have your device works reliably, so I am pleased to provide you with tips to help with this.

  Learn the steps of troubleshooting we have for this message here:

  If your iPhone, iPad or iPod touch won't charge - Apple Support

  If an alert says that your accessory is not taken care of or certified

  These alerts can appear for several reasons: your iOS device could have a port of loading dirty or damaged, your loading accessory is defective, damaged or not certified by Apple or your USB charger is not designed to load devices.

  1. Remove all debris from the charge on the bottom of your appliance socket.
  2. Restart your iOS device.
  3. Try another USB cable or charger.
  4. Make sure you have the latest version of iOS.
  5. Contact Apple to set up the servicesupport.

  Thank you for using communities of Apple Support, cheers!

• keep the photos in icloud, but remove them from the iOS device?

  Hi, need help to keep my old photos in the cloud, then to remove them from my iphone device. I can also keep on my mac but still once, how can I make sure that when I delete from my iphone I can still access them in the cloud or on my big Mac? My phone is getting to the maximum it can hold up to now need to move them to a storage for later viewing device, editing or other.

  Thank you

  You cannot store pictures on iCloud and remove them from your device. Remove them on the phone also icloud removes them. You can set for storage optimized on your device that compresses the resolution of the device stored photos, keep the originals in iCloud.

  If you want to be able to todelete pictures from your phone and store them elsewhere, you must use subscription such as Dropbox cloud storage or store them on your computer.

  iOS: import personal pictures and videos of iOS devices to your computer