Advantage of ink HP deskjet 1515: why does my printer print fonts that are so small even read?

So I bought this printer about 3 months ago and everything went smoothly... But last night when I tried to print a slide power point, it prints all of a sudden the texts which are so small... In fact I put it for 4 days by sheet until I print it, but then when I print, everything was compressed into 1 A4 paper... As I can't do anything... I tried to print other documents from ms word, but also have the same problem.

@Adeanna

Welcome to the Community Forum of HP.

If I understand the question, then the problem MIGHT be that "Scale to fit" may be active and should be DISABLED on preview before printing.

Printing PowerPoint: slide c. size printer Page size

Click on the thumbs-up Kudos to say thank you!

And... Click on accept as Solution when my answer provides a fix or a workaround!

I am happy to provide assistance on behalf of HP. I do not work for HP.

Tags: HP Printers

Similar Questions

  • Advantage of ink HP Deskjet 1515: print but not scan

    Hello world

    I am using HP Deskjet Ink 1515 advantage and when I am trying to scan a page or a picture, shows the following error: the HP Deskjet series 1510 was not found. This is something that has happened today and never before.
    Although the error shows that the device is not found, I can normally print with it.

    I would appreciate all the advice really.

    Thanks in advance.

    Hey there,
    Try the next step, I believe that this will help you overcome the problem.
    1. start by dissconnecting the USB cable.
    2 remove the printer driver of "devices and printer" which is located in Control Panel.
    3. Download this file (http://ftp.hp.com/pub/softlib/software12/COL48430/al-117537-4/DJ1510_188.exe) which is the solution complete for the HP Dj 1515 series.
    4. extract the contents of the file.
    5 open the "Utils" folder and choose the folder 'x 64', inside you should be able to locate a file called 'RemovePreInstalledDrivers' > once you open this file black screen opens, wait for it to close, then move to the next step.
    6. go to the main folder where you have already extracted the software and right click on the file x 64.msi (name is most likely your printer model), then choose the Option "repair". > Subsequently, you will be asked of preformed a reboot. (Incase you will get a Messege saying "this action is only valid for products that are currently installed" simply double-click the file instead)
    7. after the restart, the head disk Local C/ProgramFiles/HP/PrinterModelFolder/bin/USBSetupLuncher and double click it.
    8 follow the steps for you, and connect the USB cable when prompted to.

    Who should add the scanner to your imaging devices.
    Best Of luck ~

  • advantage of ink HP deskjet 2545: Tablet android on printer hp 2545

    Hello. I have a samsung s tab compresses. Currently, I bought a printer (hp deskjet ink advantage 2545) and let me know how to download the drivers on the Tablet, because I don't have a laptop

    Hello

    How do you connect your printer now? Please, search Google Play/Store app HP ePrint and install for your Samsung (it uses no drivers, it uses applications). As long as your Samsung and your printer are on the SAME network, you can use HP ePrint for printing. You can also use the HP AiO remote scan.

    Kind regards.

  • Why, when I send an email using windows mail (RoadRunner ISP) sometimes it does not transmit the image that are in the original.

    Why, when I send an email using windows mail (RoadRunner ISP) sometimes it does not transmit the image that are in the original.

    Some messages are not complying with the standards of the Internet and the images do not show before their delivery.  You can overcome this by transmitting the message as an attachment instead, and then the images will be intact.

    Steve

  • Epson Aculaser C 1100 printer does not print after that the text of the error 'install C Tnr basket' black and printer doenst photography black and white or grayscale pages

    Epson Aculaser C 1100 printer does not print after that the text of the error 'install C Tnr basket' black and printer doenst photography black and white or grayscale pages

    the printer is not the shades of grey even print cartridge is not yet empty

    y at - it software for hauler color printing?

    Thanks for your comments

    Hello Nilsvolkel,

    Thanks for the reply.

    I'm sorry for the late reply.

    I appreciate your patience and time.

    Do not require any special software.

    However, you can use the steps in the following articles and check.
    Reference:
    http://eSupport.Epson-Europe.com/ViewArticle.aspx?LNG=fi-fi&kbid=328037&data=FCFfEfoyEiGLYDIUqzWyE0QE3127X87y&CL=1

    http://Windows.Microsoft.com/en-us/Windows/choosing-print-options#1TC=Windows-7

    Please keep us informed.

    Thank you

  • Advantage of ink HP deskjet 2545: advantage of hp deskjet 2545 ink cannot print

    I just bought the HP Deskjet Ink Advantage 2545 and install the driver on my desktop Microsoft windows vista 32-bit, but it can not print and the print also test error. After that, I try to my computer window 7 64-bit laptop and the problem was the SAME, it can't print anything and test printing also error. I tried many way solve the problem, but there is still same, example: 1) select the checkbox hide all Microsoft Services, disable all services and then click on OK and rebbot.
    (2) temporarily disable all Antivirus software.

    (3) reinstall the driver

    4) using print and scan doctor

    BUT THE PROBLEM REMAINS THE SAME!

    Hi @TommyHong,

    Welcome to the Forums of HP Support! I understand that you are not able to print to your HP Deskjet Ink Advantage 2545, since your computer running the Windows Vista operating system.  I see that you did a lot of troubleshooting steps already, thanks for that! I would try a different approach, please follow the steps below:

    1. perform a clean boot: How to perform a boot in Windows

    2. now, go ahead and use the System File Checker: use the tool File Checker system to repair missing or corrupted system files

    3 uninstall/reinstall:

    1. disconnect the USB key if you use a direct connection.

    2. remove the HP software DJ 2545 uninstall from the control panel of your computers an option of the program.

    3. restart the computer.

    4. make sure that all the software DJ 2545 disappeared from the list programs, but also your HP folder listed under all programs in your Start Menu.

    5. now move forward and start to Setup the printer to a wireless network for the HP Deskjet 2540 and 2545 all-in-One Printer Series

    Here is the link for the software and drivers:

    HP Deskjet 2540-All - in - One Printer series full feature software and drivers

    6. go ahead and print a test page.

    7. If you are unable to print a test page, please run the HP Print and Scan Doctor- designed by HP to provide users with troubleshooting and problem-solving features needed to solve many common problems encountered with HP print and scan products related to Windows computers.

    Please let me know if it was successful! I'll watch for your reply.

    Thank you

  • HP Deskjet 2050 A does not print

    no error message

    test paper does not print

    printer is ready

    We port is used

    Hello

    1. What is the operating system installed on your computer?

    2. don't you make changes to the computer before the show?

    Please follow the steps mentioned in the links below

    http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  • DeskJet 1050 J410 does not print.

    Hello. I am using Windows XP SP3, Firefox running. My printer does not print anything except the diagnostics page and the self-test. I deleted the printer and reloaded the software from the CD provided by HP. The printers and Faxes folder show the printer as loan. I restarted the PC, nothing helps. I hope someone can advise me. Thank you.

    Fixed a problem with the download of the software suite of HP rather than CD supplied with the printer. Thank you.

  • DeskJet 3050 j610a does not print

    Hi, my Deskjet 3050 j610a has stopped printing in black or color. I use Windows 7 and Surface RT with this all-in-one wireless printer, and I have reinstalled the printer software earlier. HP diagnostic tools say the printer is fine, but it is not printing. It is visible to my computers and even paper and looks like it is printing. Just no images on the documents.

    Any ideas out there? Thanks for the attention.

    HTG

    Thanks for the suggestion. It turns out that HP tech support was able to understand my printing problem came to have old cartridges. I went to the store and got new ones, and now the printer is once again beautiful documents. Thank you, HP!

  • HP Photosmart C4680: HP printer does not print fonts recently uploaded to my word document

    I recently downloaded some fonts that I wanted to use to make my own wedding guest.  However my printer does not print these fonts.  It will print other Word documents with Word fonts. Can someone explain why?

    Thank you!!! Great help!

  • CP1518ni on Win7 64 bit does not print unless that ' ignore the ' is on

    I get the message "replace supplies" and the printer does not print unless the 'out' substitution is turned on. I replaced the ink once and then got the message "replace supplies" in the following days.  I installed HPPDU which refers to the series CP1510 PCL6. the diagnostic screen says everything is fine. I also downloaded the 20100616 update.  I noticed that the 'solution' ToolboxFX does not work with Win 7.

    What Miss me?  Should I continue printing under "replace" until all four cartridges run out completely, and then trust that the printer will work without the substitution on the future cartridges? Thanks for your help on this.

    Bkaytee

    Yes, it is possible that drive e-lable contact has malfuncioned.  I would say that your options is as follows:

    A. keep the game of "substitute for" will continue to work and should cause no issue. (It doesn't stop that monitoring of level of supply of Toner, then when degrades the quality of printing, then a new toner must be purchased.)

    B. contact HP support for service possible. 1-800-474-6836 1-800-HP-Invent

    Thank you

  • Your smart phone BlackBerry Smartphones does not have system requirements that are needed to support the BB App World

    Hello

    My latest lamp died with a JVM. I just replaced today and I want to retrieve my downloaded applications. After I restored the device of BlackBerry Desktop, any of my downloaded apps are there. I have a brand new 9860, together running 7.1.  I run the App World. He told me to upgrade. When I followed the upgrades of the screen, I get an error message: notice: sorry your device does not meet the system requirements that are needed to support the BB App World. I have a brand new phone has so first question... I can update App World on Wi - FI. or should I do my first phone company data Plan? I've been running my old phone without data plan but enjoying use BBM and cell phone. Not happy.

    Yes, hopefully soon... I know that the right people are aware of the "incorrect" error message

  • Epson Workforce 345 while a printer does not print. message that the local print spooler service is not available and I need to restart the spooler.

    All of a sudden my Epson Workforce 345 all-in-one printer will not print.  I get a message that the local print spooler service is not available and I need to restart the spooler.  What does that mean?

    Hello

    Check with the manufacturer of the printer for updated drivers, support and Forums for
    known issues.

    Check with Epson support, their documentatiion online and drivers. As it's Epson OEM
    responsible for the proper functioning of the printer and their drivers provided.

    If there is that no Windows 7 drivers try the Vista drivers if those that exist.

    Epson - Support us.
    http://www.Epson.com/cgi-bin/store/support/SupportIndex.jsp?BV_UseBVCookie=Yes

    Epson - support from Europe
    http://www.Epson.co.UK/support

    ===============================

    Check chan seen message here - one of the highest.

    fixed spooler subsystem app stopped working
    http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

    ===================================

    Follow these steps in the kind of prerequisites:

    Clean the General corruption and repair or replace the damaged/missing files.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    Then run checkdisk (chkdsk).

    How to run check disk in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    ------------------------------------------------------

    References to Vista also apply to Windows 7.

    Go to the printer manufacturer's website and get the latest drivers - download - REGISTER - install yet. When loan
    to install - make a right-click on the pilot - run as administrator.

    Also check with your support and the Forums printer manufacturer.

    --------------------------------------

    Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
    the latest driver).

    Check Mr. Fixits here and if you use the other methods go back and try again later.

    Problems of print and error - a Mr Fixit of printing
    http://support.Microsoft.com/GP/printing_problems

    Solve printer problems - a Mr Fixit
    http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

    ------------------------------------------------------

    Logon as administrator

    Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

    You can copy and paste each line except those brackets and press ENTER after each.

    net stop Spooler

    (echo suppression of all print jobs)<-- you="" should="" see="" this="">

    ping localhost n 4 > zero

    del/q %SystemRoot%\system32\spool\printers\*.*

    net start Spooler

    (sound Done!)<-- you="" should="" see="" this="">

    ping localhost n 4 > zero

    Another way
    http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

    Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
    http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

    If you use Control Panel - devices and printers

    Try after unplugging your printer if necessary.
    -------------------------------------------------------------

    Also check the spooler print and its dependencies and addictions Service.

    Windows 7
    http://www.blackviper.com/2009/01/13/black-vipers-Windows-7-service-configurations/#more-2989

    Windows 7 Service Pack 1
    http://www.blackviper.com/2010/12/17/black-vipers-Windows-7-Service-Pack-1-service-configurations/

    How difficulty Windows Vista print spooler starts do not
    http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

    ------------------------------------------------------------

    Check this thread if necessary - to stop and erase the spooler

    http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

    and here

    http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • Adobe story does not lines of dialogue that are amrked with (CONT'd) in a CSV export.

    For some reason any Adobe story does not export the lines of dialogue that are marked with (CONT'd) in a csv file. The rest of the dialogue exports very well, little bits that are marked with (CONT'd) are not displayed in the dialog column!. It can be changed with some settings or is this a bug? The script was imported from a file FDX. If anyone has a solution for this, please let me know.

    Thenk you.

    Thank you for reporting this issue.

    It is indeed a bug.

    Just to get the correct data in csv, a workaround for this problem would be to replace the word "suite" with a door-place Word, perform an export to csv and then change it back.

    1. press Ctrl + F in the script to open find/replace

    2. replace the word "Suite" with a placeholder Word, say "TEMPCONTD".

    3. the export to csv format script

    4. now replace the word placeholder with 'Suite '.

  • Advantage of ink HP Deskjet 4645: printer does not print not my PC.

    Hello

    My printer is no pint of my PC but is printed the eprint Centre fairly easily. I tried several options of toubleshooting but it will not print from word or anything on the PC. As I set up the printer, I have had this problem. I use my printer to backup to my print jobs. I re-installed the printer in the hope of solving the problem, but in vain.

    I am ready to launch this pinter, can we please, please help.

    Thank you

    Ann

    @Ann1404

    Try this firmware update.

    http://ftp.HP.com/pub/softlib/software12/COL56068/MP-134897-1/DJ4640_R1418A.exe

    REO

Maybe you are looking for