Advice needed to run 2 instances of VM Workstation 8 on separate physical machines

Similar Questions

• Need advice to clone my newly installed EBS 12.1.3 to a physical machine

  Hello guys,.

  We just migrated EBS 11i to 12.1.3 with RDBMS 11.2.3 on the same server. Our Test instance is on a physical computer and DEV is on a Virtual Machine. We need to update or to clone systems Test and Dev or Prod. What is the best approach to follow me into the cloning Prod? I'm looking to Doc ID 406982.1 but it is not very clear to me. Someone at - it get the documentation step by step for cloning?

  Thank you

  Mathias

  Mathias,

  The document you have is all you need.

  You can also check (RapidClone troubleshooting issues with Oracle Applications R12 (Doc ID 603104.1)).

  And, if you Google 'quick Clone"R12 you will find many successes.

  Thank you

  Hussein

• running multiple instances of VBAI does not work

  Hello everyone,

  We are 4 common examples of VBAI at the same time. Recently, he had to copy it (because production is doubly).

  With our first system, we have no problems when you try to run multiple instances of VBAI. This time, however, it does not.

  Our system:

  • 4 cams: Allied Manta 201
  
  
  • camera is triggered (rising edge) separately, but almost simultaneously.
  
  
  • Four port NIC (with the right driver :-))
  
  
  • 4 ports and our on-noard port are bridged.
  
  
  • computer: intel I5 (4 cores)
  
  
  • License to run Vision Builder 2012.
  
  
  • Programmed with Vision Builder HAVE 2012.
  
  
  • Interface programmed in c# (receives images of the relevant info 4 programs and displays on the screen).

  Action taken:

  • Test with our program that opens 4 instances of VBAI. Result: 1 single instance opens.
  
  
  • Removed our bridge a connected our cams on a switch. Result: 1 single instance opens.
  
  
  • Open VBAI 4 VBAI-programs directly (but separately). Result: Each program opens and is fully working.
  
  
  • Open 2 programs at the same time (with VBAI). Result: Fist opens and is equipped with the work. At the opening of the second program, that we get error messages saying that it is not possible to connect with our camera.
  
  
  • The test above was created with:
  
  
  1. The cam connected to our network card 4 ports.
  
  
  2. The cam connected through a switch.
  
  
  • I have also written 4 simple programs (just enter a period followed by image)
  
  
  • With these programs, I tried the above test (VBAI 2 hours and run both programs at the same time). Same problem: 1programs starts, the error messages when opening a second program.

  I have the impression that it's a network problem, but what bothers me is that, when the bridge, I don't see a difference with our another computer that works on our original assemblyline. When you work on a referral that our parameters are the same as on a computer that does not have a network card 4 ports. The computer (and liked)) allows us to run multiple instances.

  Any thoughts?

  Any help would be greatly appreciated. I'm sure I'm missing something obvious here, but I don't really see.

  If you need more information about something, let me know.

  With sincere friendships.
  Tom Declercq

  
  

• Update loop under Vi of hand / run multiple Instances

  Hey everybody,

  If I want to keep my code as modular as possible so that I can see any sub or VI.

  One of the SUB vi is permanently offices incase another output is detected. I don't want to make this mark on the main level because I don't want a huge loop in my main.vi and you won't worry about sending shift register valuse to my Subvi for him to function.

  Essentially, I have designed this subroutine Vi and am now trying to constantly be driven from a main.vi

  This hand is simply.

  Cluster of entry--> Sub VI

  Void VI retains a loop waiting for a change request action. Unfortuantely when I change the vale in main.vi the avlues in Subvi don't update. I guess that makes sense, in C, for example when you call Returns you need to wait until the end of the function call to update. Yet, as Labview is so strongly focused on taking SUB vi to do almost everything for you, I can't imagine labview is not able to update these values. I looked around and the answer seems to be global variables. I really don't want to use the because my application will become very big, but I'll use them if I need to.

  Unforunately, when I tried to use my global variable thing, it didn't work.

  1. global Var = Cluster

  2. it's in the Subvi both the main VI.

  3. when I run my code the global variable is not up-to-date on both front sides when I change one of them. I'm doing something wrong?

  A few comments.

  • You have not included the global variable
  • If you want to run multiple instances of the Subvi in parallel, it must be reentrant.
  • As the Subvi is interactive, it must be configured to display the front panel when it is called, otherwise there is no way to stop it ever.
  • All your time loops needed little expects. They have no need to turn as fast as the CPU allows, all other processes of hunger.
  • "Go to under control" is extremely complex and crawling with weird stuff like an ant farm.
  • • The shift register must be initialized to avoid surprises (but you probably don't have it all)
    • Your loop runs one time too many.
    • Avoid the stress points, such as the structure of the case.
    • You can replace this whole thing with for example a table of threshold, no need to loop. (see image below).

  

  Good luck!

• Running several instances of Win7

  Hello, this is my first post in this forum.

  I tried to do some research to make sure that I'm not something that has already been answered, but that have not yet found.

  I would use vSphere Hypervisor (free product) on a single server and run several instances/images of Win7, so that I could use it in the classroom. My hope is that by doing this I need only to maintain an image and keep up-to-date.

  My plan is to create an image, and then allow clients to connect to the server via RDP and start a Win7 desktop computer using this image. I also need to have Office 2010 installed on this desktop is going to be where my teaching is centered.

  My questions are:

  1. This product will make?
  2. How to create the image of Win7?
  3. How licensing issues are handled so that I can legitimately run up to 5 copies of this Win7 desktop computer?
  4. Any other suggestions or thoughts that I have to consider?

  Thanks in advance.

  Russ Kauk

  If you are willing to accept a slight modification, it can do.

  (1) creating an image or

  (2) you create clones of n of this image and start them

  (3) users connect via IP/hostname to each individual workstation.

  If you need to automatically configured virtual machines and management, then you have to accelerate the non-free hypervisor, vCenter and VMware View.

  Regarding the issuance of permits - you will need licenses for Windows "n", likely.

• 11g BPM - definition of the instance of a running process instance data

  Hello
  
  What is the recommended model to interrupt the running process instance and modify an instance variable (data object)?
  
  Scenario is:
  -process instance is launched with an interactive look at the instance data
  -an event is fired, effectively the interruption of the instance and change the instance data
  -as soon as the user opens the screen for the interactive data has changed
  
  Any help much appreciated.
  
  see you soon
  
  Tony

  Hi Tony,.

  It depends on what version you have.

  If you use an earlier version or 11.1.1.5 (without the feature pack), I think that arun Pareek has an old blog on how to do it using BPEL. I can find it for you if you need.

  If you use 11.1.1.5 (with the feature pack) or more, you can use a correlation as we are used to use in 10g. Let me know if you need more information, but your process would need to have:
  1. a defined correlation that is unique
  2. a subprocess of the event which has a startup (no-the interrupting) Message event that uses the correlation (this sub-process of the event, that's what you would use from outside the process to notify the process).
  3A inside the subprocesses of the event, you would be directed to an update activity that would change the value of the variable in the main process (perhaps put to a value you pass in from outside the process via the subprocesses of the event start Message event).

  Hope it gets you going. Let me know if you need more details.

  Dan

• I need to run two different versions of Firefox

  I'm currently crashing problems with Firefox 26 on openSUSE 13.1.
  25 Firefox works perfectly well. There's two versions of openSUSE rest. I suspect an add-on.
  To debug this I need to run both, one to report the bug and make my day job and one to test the bug.
  I saw the other similar thread, but I'm not sure that the subject is the same.
  I downloaded the last FF since the mozilla site and copied the folder ~ / Documents.
  But when I run "~/documents/firefox/firefox--non-reculees - p", choose a new profile, I always get firefox 25, the installed version, not Firefox 26, donwloaded version.

  If I add the troubleshooting information, the message is refused (too long)

  wait, it's me.

  I force you use local firefox correctly

  Sorry
  JDD

• need to run windows in safe mode with network to have browserws working properly. using IE and Firefox. Website of punch comes in properly next tab sites just wai

  need to run windows in safe mode with network to have browserws working properly. using IE and Firefox. Web site fisting comes in following correctly sites just waiting for the website tab help

  If it works in Windows safe mode, then you have a problem with other software, maybe a security software or a system driver that runs on your computer.

  It is possible that your security (firewall, antivirus) software blocks or limit Firefox or the process of plugin-container without you inform, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls
  • https://support.Mozilla.org/KB/fix-problems-connecting-websites-after-updating

• Is anyone able to run Adobe CS5 with El Capitan now? I've read about problems with Illustrator and photoshop, but these seem to be in 2015 Octobe5. She improved at all? I need to upgrade that I am running an old OS v but I need to run CS5.

  I've read about problems with Illustrator and photoshop on EL Capitan, but these seem to be in October 2015. She improved at all? I need to upgrade that I am running an old OS v but I need to run CS5. Can not afford to go to CC. I have a Macbook Pro.

  CS5 and 10.11 are not supported and will never be supported by Adobe or Apple.

  However it works for some, more actually, but not all. There are sporadic problems with Illustrator, Photoshop seems to be the best. Do not expect an improvement and keep in mind that anyone from Adobe, Apple or anywhere else will fix it.

  Do a clean install

  Make sure you have the Apple Java

  h ttps://support.Apple.com/kb/DL1572?locale=en_US

  Make sure you have your serial number and if you are having problems with the serial number or the serialization however adobe of web server will not support your problem.

  update the application via photoshop.

• You want to know what ipad I need to run Apple Sound that for the scene.

  Sing Gospel music to the tracks on the CD.  You want to know which ipad should I get to run Apple Sound that to the scene.  That's all I'll use it for, so don't care about movies, phone, games, navigation, or much else. . She was told that 16 GB would be enough to hold 500 songs and IOS 7 need to run its what. If need one for this application. Don't know much to this topic, so really need help.

  Thanks Bill

  All the new iPad will run iOS 9 now. It would take a 16 GB iPad. I have 425 songs on my iPad, and they represent 1.8 GB of storage. But... You cannot add storage to an iPad, then you may want to consider eating less up to 32 GB. You never know what you could want on the road.

• I need to run activex to connect to a server

  I need to run activex to connect to a server. I have a new mac running EL Capitan of air

  If the site requires browser features only Windows as ActiveX, so it is not really a web site at all, and it of nothing that you can speak except to use Windows or let the site operator know that its designers are incompetent.

• Why do I need to run 7.1.1

  I was never very good at version control. Creating installation files is a pain if LV asks for such and such disc 2 years ago.  So, when I got my records of 2010, I did what I always do... I have uninstall the former LV (100%) and reinstall a new. In general, this works very well. I have to build my app again exe files, but it's OK.

  However, something is differenent this time.

  Everything seemed OK, but when I re-built a small exe and executed, the PC wanted to install Runtime 7.1.1. After the cancellation of the request, my program starts well. But now, same LV launch starts the request for RT 7.1.1 and I have to cancel.

  I tried to install RT 7.1.1 a DOWNLOAD but it fails because there is a more recent RT installed (and there has been for many years).

  Here is what I have done to contribute to this problem, I do not know how:

  (1) normally delete all software from LV is "grouped" in the Control Panel screen software, but I noticed an old runtime (6 something) listed separately, so I killed him.

  (2) I wanted to get rid of Datafinder (I hate the extra icons in my sandbox!) because I'm never going to use, so I uninstalled this software using the control panel.

  And that's all.

  Any suggestions?

  I think that the time required will depend on what you install in addition to LabVIEW. If you do not install the toolboxes or hardware drivers, it is possible/likely that you only need to run 2010. I have installed a generic LabVIEW since - never. I have time for 7.0, 7.1, 8.0.1, 8.2.1, 8.5.1, 2009, 2010 more CVI, GPIB, VISA etc, etc. Almost impossible (for me, anyway), what are the dependencies. Really nothing more it no more.

• How to identify files that may be deleted without jeprodizing the files needed to run the system?

  How to identify files that may be deleted without jeprodizing the files needed to run the system?

  If you have to ask, the answer is "Don't '.  Uninstall programs that you don't need through programs and features or add/remove programs.  Do not, under any circumstances, remove files unless you are absolutely sure you know what you delete first to 100%.

• Need to run Windows Update online

  Please note:
  I chose the 'Windows Vista' forum, but the link to this forum.  Please move my question to the right place.  Thank you!
  ========================================
  I need to run Windows Update to www.update.microsoft.com/windowsupdate/v6/vistadefault.aspx instead of from the Panel.  Can I disable the "automatic" version, or is there another way to go beyond this?

  The problem is that my ISP limits the size of downloads of the day, unless I have download only for a certain period of time during the night.  I can't afford to have my computer slow down to dial-up speed during the day below, and since I don't want to give general approval of Windows Update to download and install, I can not limit his schedule.

  Thank you in advance.

  @NicoleL: Please report all further follow-up replies to your original thread:http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/12c29e06-282e-4a70-aecb-135305d9e5b1

  You have a real mess on your hands.

  PS: Despite what you see at the top of this page in the URL or the forum, this forum handles problems of Windows Update for Windows XP, Vista and Win7. [What were thinking?]

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• money more sunset "files needed to run the Planner missing or corrupted" then program encounters problem and closes. Downloaded multiple times on multiple computers

  money more sunset "files needed to run the Planner missing or corrupted" then program encounters problem and closes. Downloaded multiple times on multiple computers

  Hello

  I suggest you post the same question in Microsoft Technet forum for Microsoft Money Plus Sunset related issues. We have a dedicated team to help you with the problems of Microsoft Money Plus sunset.

  Microsoft Money:

  http://social.Microsoft.com/forums/is/category/money

  Hope this information is useful.