advise of HP does not work I can not also to load hp docking station

Similar Questions

• X 220 does not sleep well in the docking station

  Hello!

  When my X 220 are in the docking station (3 ban) and mode 'sleep' it often just turns on again. I tried unplugging all devices (mouse, ext.keyboard, etc.) the station host, but with the same result. All the drivers and so on are updated.

  Anyone have the same problem and/or for any solution?

  Hey ThinkVegard,

  I would double check your Power Manager setting and make sure they are properly defined and are not wake your computer the. There are a few settings in the BIOS that can do the same thing and suggest you checking these too just before we have to start looking elsewhere.

  Best regards

  Hiro

• USB 3.0 port select the pen drive, but does not allow to load mobile

  Hello

  I have acer Aspire V3 - 471G laptop with usb 3.0 port. In this port, it says usb charging device

  the manual also says it can charge when connected to the laptop via a usb port.

  If I insert the USB key, it allows to use, but when I connect the mobile to laptop using data cable the mobile isnot responsible... Why? Please help me... I m in prblem... I think that usb 3.0 is not damaged but not chargin... makes me using trouble.please! 11

  If the USB 3.0 port sees the other USB devices correctly, we know that the USB port works correctly.

  This does not guarantee that load power supply is working properly.

  Make sure that the cable is a charging cable.  If this does not work, you may need to contact the Department for further assistance.

• When using the docking station when my laptop can connect USB. printer, etc... ? I know that I can connect my laptop to a docking station.

  When using the docking station when my laptop can connect USB. printer, etc... ? I know that I can connect my laptop to a docking station.

  When using the docking station when my laptop can connect USB. printer, etc... ? I know that I can connect my laptop to a docking station.

  Hello

  With Docking Station, you can connect all the cables for printer, keyboard and mouse, adapter directly to the charging station.

  So whenever you use a laptop, you have just dock the laptop on the docking station and not need to re connect all cables again.

  This will help you when you move frequently with the laptop.

  Docking station will save your time, outside any other aspect, that it has to offer.

  Zaki.

• WMV file does not play when loading on the web... but file system work?

  I have a MOV file that I converted using FFMPEG (are there better tools for this?).  When I open the file in windows Explorer, works fine, but when I copy it to a virtual directory and access it via the HTTP protocol, all of a sudden WMP 11 does not seem to recognize the file and he throws some sort of abstract error which brings me here:

  http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=11.0.6002.18311&ID=C00D11B1&ContextId=71&OriginalID=C00D07E2

  Riddle me this: what could possibly cause this?  Either way, I tried to load the file into Windows Movie Maker, but it crashed it.  Well, wasn't so much a 'crash'... modal dialogue saying 'Import' appears and essentially takes over the machine.  I can't click anywhere wiothout get a "Ding" of the OS and my last resort was to end task.

  I never knew what the problem was... the file was fine.  I could open in WMP11 via file-> open and file-> open location, pointing to the same location over HTTP (virtual directory), raised problems.

  It should be noted that boththelinks provide information... If anything, I would say that it is the network at the suggestion of network, but the server was definitely upward - I had a feeling he might have something to do with codecs... maybe the server was to launch a crazy MIME type.

  I think that we have finished upload the video to YouTube and go with it.

• Launcher main exe stopped working so my logitech webcam does'nt work, what can I do?

  My webcam logitech 170 does'nt works because Launcher main exe stopped working what can I do about it?

  There are a number of discussions in Logitech forums at the topic "main Launcher" (not sure whether an any of them will be useful): http://forums.logitech.com/t5/forums/searchpage/tab/message?location=Board%3Aquickcam_software&q=launcher+main#message-list

  Logitech product support can also help: http://www.logitech.com/en-us/support-downloads?debug=0

• Advised that PC does not reconise the USB hard drive or extertnal

  I have a XP PC.  A year ago I was warned when I inserted a USB stick that my PC does not recognize it. a friend told me to download a new driver for it, I went to their Web page and didn't understand where I could find a driver for it. Because he didn't have a lot of information about it, let him.

  I had a hard drive from my previous PC and bought a caddy for her, to use as an external hard drive. It worked for awhile but then recently I was informed that the PC does not recognize it. I tried to get a new driver for it but I don't seem to be able to find on the web pages of manufacturers. I have also been informed that I may need to download a new driver for the Caddy if that is the problem.

  HELP:-what I look on a web page of manufacturers down load new drivers?

  Is there an easy way to do this?

  Hi Allen,.

  Follow these methods and respond with results.

• Browser does not during the loading of my website!

  Hello.

  I don't know why this is happening, now, my new website http://www.androidizer.com/ does not work on my firefox browser! If I entered in the url and press ENTER, it'll load and after a while the browser interrupts the answer! Please help me. This is my site or the issue of browser problem?

  Firefox version: 24.0

  Hello

  Many issues of the site can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.
  Note: This will be you temporarily disconnect all sites, you're connected to.
  To clear the cache and cookies to do the following:

  1. Go to Firefox > history > clear recent history or (if no Firefox button is displayed) go to tools > clear recent history.
  2. Under "Time range to clear", select "all".
  3. Now, click the arrow next to details to toggle the active details list.
  4. In the list of details, see the Cache and Cookies and uncheck everything.
  5. Now click the clear now button.

  More information can be found in article to clear your cache, history, and other personal information in Firefox .

  This solve your problems? Please report to us!

  Thank you.

• Satellite A305D-S6848 does not start - cannot load Windows

  The DISPLAY SHOWS "Windows failed to load because a required file is missing or corrupt... »
  file: ntoskrnl.exe
  status: 0xc0000098

  I DON'T HAVE AN INSTALLATION DISC, AND DON'T KNOW HOW TO GET SYSTEM OPERATIONAL RETURN?

  CAN SOMBODY IF YOU PLEASE HELP ME?

  Hello

  There seems to be a series of Toshiba laptops we and that's why the recovery process can be different on Toshiba notebooks European

  However, the recovery procedure must be mentioned in the manual of the user. Check this box

  First try this:
  Switch on and press F8.
  Select Safe Mode, and then try to start the Windows mode without failure.
  If this does not work, try to repair the computer option.

  I think the laptop must be equipped with HARD drive recovery. This means that you could recover the device without the use of the recovery diskette.

  As mentioned it's series American TV to laptop and I know that you must press the 0 key immediately after the laptop has been powered.
  This should start the recovery

• Satellite A300-17N - the CPU multiplier does not change under load

  Hello

  I have Toshiba Satellite A300-17N. Yesterday, I noticed that my CPU does not change its multiplier under load.
  I have used programs like premium 95 and Orthos CPU load and programs such as CPU - Z and Everest.

  The multiplier blocked on 6 and do not change its value.
  Under load the multiplier should change its value to 13, but it didn't happen.

  In this case my CPU works on 798 MHz (133 x 6) 1732 MHz (13 x 133) instead.
  I will be grateful for any advice.

  Hey Buddy

  I put t know what you are talking about, and I don t know if you're up-to-date on CPU technology but the laptop was equipped with the Intel Pentium Dual - Core T2370 processor.
  I recommend the Intel page on Intel Dual-Core T2370 properties.

  This processor supports Enhanced Intel SpeedStep technology.
  Do you know what it is?

  Here is a short info from the Intel page:

  + Enhanced Intel SpeedStep technology allows the system to dynamically adjust the frequency of voltage and core processor, which can translate into a reduction in average energy and decreases heat production average. +

  I think it should be clear now.

• USB-5133 appearing does not in MAX, "loader" shows driver in Device Manager.

  I have a USB-5133 can I use it on several computers. I'm putting it on another PC (XP Pro). The device is recognized by windows and it goes to install the drivers. When it's done, in the Device Manager-> data acquisition devices, I see "NI USB-5133 Loader. On other computers, he said only: "NI USB-5133. The green light on the device is NOT on, and the device does not appear in Measurement & Automation Explorer.

  No idea why the appropriate driver is not loaded? I have NO-SCOPE 3.5.2.

  Hello Gallamine,

  The NI USB-5133 Digitizer is a plug-and-play device, try removing the device in MAX.  Then, unplug the device and plug it in again.  The computer should record the device of MAX as "NI USB-5133.  If this does not work, the data base of the MAX could be damaged.  To resolve this problem, see the following link:

  http://digital.NI.com/public.nsf/allkb/2C7480E856987FFF862573AE005AB0D9

  Finally, if the database setting does not resolve this problem, try to reinstall the latest version of OR-SCOPE.

  Kind regards

  Roman S

• HP LaserJet Pro M127fn MFP: Automatic document feeder does not detect documents loaded on it

  Hello

  I use all of this in one previous machine a few months. Since the last two weeks than its automatic document feeder is not detect documents loaded on it, while it is perfectly flat scanner scanning and printing as well. This machine is connected via a usb cable. I tried all the troubleshooting options available including resetting the printer, cleaning ADF etc etc sensors I also tried the update the bios of the printer, but it does not work for me and feeder is constantly unable to detect documents loaded on it. I searched the whole forum but did not find any message an answer fast and good, therefore, will be highly appreciated in this regard. Thank you

  Hey @Mohsan_IT,

  Welcome to the Forums of HP Support!

  I would like to help you today to address the issue of automatic documents feeder sensor you encounter on your HP LaserJet Pro MFP M127fn. Please include all the troubleshooting steps that you received before you reach out for support. Right now, you have completed all the troubleshooting steps supported in your efforts to solve this problem. If you want to confirm that everything was done correctly, please see the following two positions:

  • Can not copy or scan of FDA (autofeed) on LaserJet 127fn MFP
  • ADF works does not in all new Pro LaserJet MFP M127-M128

  All steps in the discussions that I provided above must be made without success, then the last step would be to perform the programming reset NVRAM on your printer. Now I will send you a private Message with instructions on how to reset the NVRAM. Please check your private Messages for instructions.

  Good luck!

• Space and some letters does not also teredo tunneling interface and pseduo miniport adapter.

  My.title.Summed.it.up.space.and.certain.Letters.won't.Work.also.Teredo.tunneling.pseduo.interface.and.miniport.adapter.

  Please.Help

  The keyboard screen (Start - All Programs - Accessories - accessibility - on screen keyboard, type osk in Start - Runor Windows key + U) allows you to type with only a mouse. The keys work here?

  You can try the section diagnostic keys shortcut and modifier Key Release to https://skydrive.live.com/redir?resid=E2F0CE17A268A4FA! 121 & authkey =! AAFg7j814-lJtmI.

  Each of the three towers of programs, services, and drivers in increasing amounts. So restrict the possible culprits.

  Clean boot

  Click Start - all programs - Accessories - run and type

   

  msconfig
  

   

  Then go to the Startup tab uncheck everything. Then go to the Services tab check hide all Microsoft Services and uncheck everything that is left.

   

  Reset. If this resolves your wake problem ½ of services / of startup items until you find that one.

  
  Tip clean boot

  If the above does not help.

  Download Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx

  Start the program by right-clicking and choosing run as administrator and click on the menu Options - Filter Options and check hide Microsoft entries and disable include the empty slots. Uncheck the box just to the left.

  Reset. If this resolves your wake problem half of the items until you find the one that.

  Safe mode

  If the above does not help.

  Click Start - all programs - Accessories - run and type

   

  msconfig
  

   

  Go to the Startup tab, and then click Start. Reset. Come back here and uncheck the box secure start to return to normal mode.

• Lightroom does not recognize files loading my AW1 Nikon raw format and load them in JPEG format. I know there are updates that would allow the camera to be recognized as first shot but I wasn't able to get out. Any help out there?

  Lightroom does not recognize raw (necs?) from my Nikon AW1 files. It loads them in JPEG format. I know that it is possible to update to Lightroom, so he knows my Nikon, but I can't make it work.

  I'd like to load as .dng files.

  update by downloading the files directly and then apply it to lr 4 and earlier versions: http://www.adobe.com/downloads/updates/

  for lr 5.7.1, lr 5 last updated, use the link below:

  Available downloadable Setup files:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: XI, X | 9,8 | 9 standard
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
  • Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
  • Lightroom: 6| 5.7.1| 5 | 4 | 3
  • Captivate: 8 | 7 | 6 | 5.5, 5 | 1
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• basejpi.htm does not allow to load the form on some machines

  Dear gurus... when I add the following parameters in my part of the configuration of the formsweb.cfg, my form does not load in the browser and it gives also no error. Values as given:
  
  baseHTML = basejpi.htm
  baseHTMLjinitiator = basejpi.htm
  baseHTMLjpi = basejpi.htm
  
  I copied this portion of a place to configure webutil although webutil also works without these values. Can someone tell me what what is the purpose of thise settings and why these values block form? This behavior is not the same on all machines. I think that his happens on systems with different bridge than these machines on which form is running.

  Hello

  All three parameters are different htm file names as values. The content of all htm files three are different.

  So, to change as follows.

  baseHTML = base.htm
  baseHTMLjinitiator = basejini.htm
  baseHTMLjpi = basejpi.htm

  Arun-