Make crashes if the audio output selected

Similar Questions

• Can I control where is the audio output?

  I built in sound on my motherboard (Asus Socket 775 using Realtek Audio).  So many times I need to switch between the different audio outputs.  Surprisingly its very difficult to find an external box which accepts audio and can spend 2 or more outputs. Most of us use a helmet, then quality maybe, headphones and speakers a speaker, etc.  Most of us need at least 2 output audio.  In any case, I tried to connect my headset to the rear and side outputs and it sounded identical to the front channel output of channel 2, 4, 6 or 8 in the Realtek audio program.  Really identical.  I went repeatedly back and forth to make sure.  There was a small delay in the sound that passes through when I plugged in the rear (in mode 4 channels) and side (in mode channel 6 or 8).  But the sound itself was the same in all directions.

  Does anyone know why it would be the same?  Was it because it was coded in stereo?  Wouldn't the audio program Realtek tries to synthesize multichannel for the side and the rear channels?  Central/subwoofer channel was mono so that makes sense.  And the mic input works fine.

  If I could control what output I wanted to use I have a selection of 3 outputs (front, side and rear) to choose from.  Helmet quality, headset for chatting, and speakers.

  I realize many computers have outputs audio to the front and back but I don't use that nor do I have the header for this Panel.  I don't know if there is a provision to switch between front and rear exits.  If there was it would be a great addition.

  But as everyone knows, it's a pain to switch the outputs in Windows.  You must start sound in the Control Panel, go to Audio off the 5 tabs, choose which output desired, apply, OK.  I put the sound on a shortcut but its still a pain.  And there are often close the application using the audio output as well.  A mechanical switch could be fleeting and the right side of your keyboard or your mouse.  A volume on the same box control would be smarter.  There is always a delay when you adjust the sound in Windows that would be better avoided.  You could do the same for the microphone so he could be muted most of the time, then passed to the headset or a speaker application where you are a little ways away from your desk.  Software switching does just fine.

  Hello

  I suggest to browse the Internet using your favorite search engine and look for applications that perform the tasks you need.

  Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• How to change the audio output for the metronome

  Hello

  I would like to send the metronome (and speech signals) for monitors to the scene in the ear.

  I understand that I can do this in MainStage using different output for the above titles vs. the rest of the 'Concert '.

  I tried to follow the instructions of the Manual:

  Change the audio output for the sound of the metronome

  1. Choose the MainStage > Preferences > General.
  2. In the section of metronome on the general tab, choose another audio output on the shortcut menu to exit.

  PROBLEM

  1. on the general tab, only the outputs 1-2 are available/selectable (likely, these are also by default for all "Concert")

  2. Why is this process in the manual if it is not executable (without doing something to another additional Set up)?

  3. it's probably among the requirements of setting up more critical even easier for using MainStage with a live band, so why am I having to ask for help at all!

  Rant on (its been a long day)

  Grateful for any help to solve cela. I guess I can send the metronome (such as a click track) and speech signals on the same outputs, which are separated from the rest of the Concert... or should I change the outputs on the other tracks and keep the outputs 1-2 for the metronome marks / voice?

  Thanks in advance for all advice and my apologies for my frustration. JM

  To access the output audio, you need an audio interface with several outputs.

• Unable to set keyframes in the audio clip selected with the pen tool - can no longer see the volume control line after developing the clip. What could be the problem? This seems to be the problem on any project that I opened.

  Cannot set keyframes in the audio clip selected with the pen tool - cannot see even the line volume control more to set keyframes on having developed the clip. What could be the problem?  I use the first CC pro @.

  You can use the Ctrl key and then click with the regular selection tool, clicking with ctrl will make a new keyframe. in this way, have no need for the tools. CTRL has other great shortcuts that will stop you having to spend retouching pads tools too.

  If the automation keyframe line is missing, you can switch on and off in the menu sequence.

  

• L50-A-11 t satellite - cannot set up the audio output

  Hello

  I have a Satellite L50-A-11 t with Win8.1, and I can't set it up to get the sound out of the speakears computer and the speakers connected to the audio output.

  The realteck controller does not show me almost any configuration option, is this normal?

  Mate sorry but the message isn't clear enough.
  What do you exactly do with Notepad and the speakers?
  You speak of internal or external stakeholders?

  The sound of s notebook (record and playback) can be configured in the control panel? sound. There, you will find the Read tab (lists all the devices as speakers, headphones) and tab (internal microphone, external microphone) record.

  You must mark the device as default device, if you want to use.

• Windows Dvd maker has left the audio recording

  Windows Dvd maker has left the audio, what have I done wrong? It will record video but not audio. I have other software installed on PC that works fine, so I don't is not material, it Mathilde do something with dvd windows creation parameters. What do you suggest me?

  Hello

  Windows DVD maker has all the features as other programs.  I use it for this reason. Try a newcreation of DVD Windows downloadand see if that makes a difference.

  I use Roxio 2012 Pro to my video, burn them to DVD.

• Change the audio output default usb headset speaker 3000 Microsoft livecaht

  Yesterday, when I ran my Rosetta Stone language software that I heard noise coming from my newly installed Microsoft Live Chat 3000 USB headset, today, when I run the software, the microphone still works. But the sound comes through the speakers of the laptop. I looked through Windows and cannot find a place to tell windows to use the headphones to the audio output.

  I saw a similar problem on this site and followed the recommendation to remove the Chuck and download the latest driver on your part and re - install but still the sound comes through the computer speakers.

  Can my children re-configured something but he does not confess to it. But I do not understand why remove then re-loading the drivers does not work. I use Windows XP SP3 entirely under license and updates.

  I have them just a couple of days ago take their back and try something else?

  Thank you

  Try Control Panel, sound, properties, change the headset speakers, also, R.click

  the President of the clock opens, properties, adjust.

• T400 2765 T6u, vista 32 b which distorts the audio output on my videos

  My T400 has poor visual quality in images and videos a week ago.  After that I updated the graphics driver, images, photos and videos are ok now, but the laptop is to distort the audio output on my videos. Can someone help me with this problem?

  Thank you

  guoclu

  I updated my audio driver and bought another helmet and solved the problem.  I don't don't know why my previous headphones does not work for t400-, it works perfectly for my office.

• How do we install the audio output device?

  How do we install the audio output device?

  Usually, plug you speakers or a connector into the line-out or speaker of your sound card. You may need to update your audio drivers to get all the features of the software. What sound card do you use? Built in or add on the map?

• Audio output selection nightmare

  I'm not the only one who hates the multiple options of selection of output in Windows XP.  And it may be the fault only of Windows.  I have 2 outputs: speakers and headphones.  Speakers USB, headset detaches the built-in sound on the motherboard.  You would think it would be easy to spend in Control Panel, sounds.  But none.  Its a nightmare.  To get my browser to be aware of the difference, I almost have to restart the computer.  Is it possible to force all programs to see that I made a new selection?  Some programs have their own audio selection options (bless!), but most don't.  And of course browsers never seem to.  I use Opera and Firefox.  I just want to be able to force my selection or push my selection on all programs at the same time instantly.  Instead of having to close them and restart each of them.

  The only alternative is to buy a box and not use USB at all.  It's amazing that this problem has not been addressed.  Keyboards should have audio switches built on them, or at least the monitor.  So many people use the headphones, earphones or headphones so that their speakers.

  In addition, what is wave?  Why have we not more than 1 volume control?  With the volume in the program (like saying VLC player) we have now 3 volume controls.  Is - this stupid or what?  To make it even more stupid, Microsoft chose to no information in help on the airwaves.  IDIOTS!  This is so typical of this company.  The WORST 'Help' in existence.  No one could be this bad by accident.  It must be intentional.  Why?  To keep the public in the dark?  Don't they just not care?  How many times do we register an error code in help have no results?  Its THEIR error code?  But there is nothing in the help.  Awesome!

  ---------------UPDATE-----------------
  For those who need more flexible sound options, I just found out that you can pass the audio device outputs without closing the program that uses in Win7.  It was a nice touch, Microsoft.  Not too fast of course like a hardware switch but an improvement over XP in this area.

  I think in the future I'll politely ask people to send links to something else than to Microsoft stuff.  They are completely unnecessary.

  The links you sent even do not start to solve my problems.  Play well!  Thanks for the effort.

  Tip: Start with non-Microsoft links.  Before that, read the question.

  A box is the answer.  An audio output possible (because anything more complex that this is just too much for the Window operating system - I don't know that apple is just as bad), get into a box with multiple outputs 3.5 mm with or without a volume control. This will work.  They are about $30 on Ebay, but probably made with pieces of garbage.  The answer is to do it yourself the assurance of the quality of the parts, because there are a lot of mechanical action going on here.  And we know that factories in China is kind of skimp on quality when it comes to friction in the movement of pieces.

  But it would be nice if you could choose just and the system would obey.  Good luck.  The answer is to remove the choice and do it yourself.  A bit like how Apple sells their simplicity: just remove choices!  Laughing out loud!  Good enough for the average, credulous lemming there.  The last thing that just need a retailer is an informed customer.

• How to fix Firefox 31, 0-1 crashing on the Audio-Api - for example on quizlet.

  Dear Firefox team,

  Since yesterday (after the updates), Firefox hangs when it tries to play a sound. I think because of the Audio Api? It crashes on Google-Mail and Quizlet.

  For quizlet, I found a site where they describe how their sound: http://quizlet.com/help/how-does-audio-work-on-quizlet

  When I opened the file audio-test firefox crashes instantly without an errormessage. Here you get the example file: http://a.s.quizlet.com/en.mp3?v=5 & b = SWYgeW91IGNhbiBoZWFyIHRoaXMsIGF1ZGlvIGlzIG5vdCBiZWluZyBibG9ja2VkLg & s = LAhrMA-0

  Can I do something about it? Its really hard for me to understand why it crashes.

  Hey again once, unfortunately I can't reproduce the problem on a windows pc and the console log is not very descriptive (at least for my level of knowledge).

  If you can reproduce the same breaks down while you use firefox in safe mode, I would recommend filing a bug to the bugzilla.mozilla.org of this regression, so that developers have a closer look.

• Is there a way to have Firefox respects the audio output device by default when it has been modified while Firefox is open?

  I've been a Firefox user for many years and I still use it as my main browser. A problem that has bothered me for years lies in the fact that when Firefox is open and I change my audio output device by default, Firefox does not respect this change and continues to play audio through the device that was used to originally. Even if you stop the audio and keep playing, does not change the output device.

  Is there a way that this can be configured in Firefox? Now, if I listen to music online (e.g. Soundcloud) I always use Chrome because it is respect changing the default audio output even in the middle of audio playback device.

  Reproduce:

  1. start audio playback (for example a YouTube video; HTML5 and Flash are affected)
  2. change your audio output device by default
  3. audio will continue to play the original output device

  Thank you!

  Hello there is a bug open for that you can vote for: https://bugzilla.mozilla.org/show_bug.cgi?id=698079

• HP Envy 17-N065na: How to improve the audio output.

  How can I configure the bang & Olufsen speakers for the best possible sound please?
  How to use the equalizer to get the best
  Audio output.
  Your response is much appreciated.

• Change the audio output to hdmi

  I have an hdmi cable connected between my HDTV and my dell xps m1330, I can get the video to transfer very well but can't do the sound of the game through television. I looked on the internet for how do to it and theres a lot of instructions for vista / w7, but I can not understand how to change the HDMI audio output in windows xp.

  Hi ccmcmill12,

  Follow the below mentioned steps and check the results:

  a. click on the button 'start '.

  b. click on 'control panel '.

  c. with the control to the "Control Panel Home" Panel, click on 'hardware and sound '.

  d. where it says 'Sound' in green letters, there are three options below that are in blue, click on "manage Audio devices.

  e. This will bring up a window titled "Sound".

  f. on the tab 'Read', he has listed the sound options at your disposal. It should read "peripheral digital output (HDMI)" click on it.

  g. There should now be a checkmark on this option.

  h. the sound should play through your HDMI connections to the TV.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why my windows media player stops the audio output from my headset in the middle of a song?

  I listen to music through a Bluetooth wireless headset. However, in the middle of songs the audio stops. Windows media player is still playing and audio output continues for 10 to 30 seconds later.

  also, it stops at the end of the songs and takes a few seconds with the new song to restart again.

  Hello

  Method 1.
  Try using a different bluetooth or use bluetooth even on another computer and check.

  Method 2.
  Play the sog directly on your computer and check the output.

  Method 3.
  If the same bluetooth works fine on another computer try to update the drivers bluetooth on your computer and check.

  I hope this helps.