AE1000 now the connection with limited access
He got working after the last restart.
Tags: Linksys Adapters
Similar Questions
-
Vista Wi - Fi connected with limited access
I can't connect to the internet. My shows of WiFi - connected with limited access. When I view the status of wireless network connection - it shows IPv4 and Ipv6 not connected.
This suggests even more than the fastest and the best option you have is to contact the ISP and have them help you with the installation and check all devices (including their and their connection to your location). You can fight with various alternatives that may or may not work because we are not sufficiently familiar with your Installer, equipment or requirement of ISP, or you can go directly to them and I'm reasonably sure they'll have you facing up and running without delay (assuming that it is not a hardware problem or something at their end).
The decision is yours.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
What can I do when my computer show me connected with limited access to Windows Vista
After my laptop has identified the n WEP network it shows limited access
Wat can I do to solve the problem?Hello
Try going into your router settings and make sure all are correct.
Have reset you your router recently? or replaced different model?
Try to remove the old connection then recornect...
http://www.TP-link.com/in/article/?articleid=214
Concerning
GT4U
-
Satellite L350 - connected to the bridge with limited access
Dear community,
The proud owner of a L350, this weekend.
Since then, trying to make wireless connections to my Linksys WRT54G Router.Still no luck. I don't see the SSID on the radar, but for some reason, that my laptop computer does not receive the correct ip addresses to my router to access the internet.
Laptop is equipped with an Atheros AR5007EG wireless network adapter.Is there someone who is familiar with it and got it work?
Faron
Hello
In my opinion, you should try to update the WLAN driver. You can find the latest version on the Toshiba site.
Have you also tried static IP addresses? You need a correct IP address because otherwise it of not possible to connect to your router.
Maybe firewall blocking something? -
Error 0 x 80042318 - I am connected to my network, but with "limited access".
Although I have installed and am running and using the IE Version 9.0.1600., now, I am unable to do a full full Internet_Connection. I am connected, but with "Limited access" and consequently, nomatter who HTTP://WWW.Address I try to connect, the page always comes back to the page 'WWW.Blank'. Any assistance that may be available to be appreciated. Thank you!... Other info, are as follows: -.
Product... COM event system.
Problem... Stopped working
Date of... 25/04/2011 15:56
State of... Not registered... Signature of the problemProblem event name: BEX64
Application name: svchost.exe_EventSystem
Application version: 6.0.6001.18000
Application timestamp: 47919291
Fault Module name: netprofm.dll_unloaded
Fault Module Version: 0.0.0.0
Timestamp of Module error: 4791ad84
Exception offset: 000007fef23d3820
Exception code: c0000005
Data of the exception: 0000000000000008
The system version: 6.0.6002.2.2.0.768.3
Locale ID: 4105
Additional information 1: 98f6
More information 2: 87675ed52f92c29ca9743f9c4f847526
Additional information 3: b07c
Additional information 4: d49704ac1ed176b8d532f7a86e9f442bFiles helping to describe the problem
Version.txt... AppCompat.txt... memory.hdmp... minidump.mdmp======================
Product
System event COM +.Problem
Stopped workingDate
23/04/2011-16:15Status
Not reportedSignature of the problem
Problem event name: BEX64
Application name: svchost.exe_EventSystem
Application version: 6.0.6001.18000
Application timestamp: 47919291
Fault Module name: netprofm.dll_unloaded
Fault Module Version: 0.0.0.0
Timestamp of Module error: 4791ad84
Exception offset: 000007fef2243820
Exception code: c0000005
Data of the exception: 0000000000000008
The system version: 6.0.6002.2.2.0.768.3
Locale ID: 4105
Additional information 1: 98f6
More information 2: 87675ed52f92c29ca9743f9c4f847526
Additional information 3: b07c
Additional information 4: d49704ac1ed176b8d532f7a86e9f442b=============================
Product
System event COM +.Problem
Stopped workingDate
18/04/2011 12:55Status
Report sentSignature of the problem
Problem event name: BEX64
Application name: svchost.exe_EventSystem
Application version: 6.0.6001.18000
Application timestamp: 47919291
Fault Module name: netprofm.dll_unloaded
Fault Module Version: 0.0.0.0
Timestamp of Module error: 4791ad84
Exception offset: 000007fef3cd3820
Exception code: c0000005
Data of the exception: 0000000000000008
The system version: 6.0.6002.2.2.0.768.3
Locale ID: 4105
Additional information 1: 98f6
More information 2: 87675ed52f92c29ca9743f9c4f847526
Additional information 3: b07c
Additional information 4: d49704ac1ed176b8d532f7a86e9f442bFiles helping to describe the problem (some files may be is no longer available)
Version.txt
AppCompat.txt
Memory.HDMPAdditional information about the problem
Bucket ID: 215206108 =.Product... COM event system.
Problem... Stopped working
Date ............... 18/04/2011-19:27
State of... Report sent
Signature of the problem
Problem event name: BEX64
Application name: svchost.exe_EventSystem
Application version: 6.0.6001.18000
Application timestamp: 47919291
Fault Module name: netprofm.dll_unloaded
Fault Module Version: 0.0.0.0
Timestamp of Module error: 4791ad84
Exception offset: 000007fef3e23820
Exception code: c0000005
Data of the exception: 0000000000000008
The system version: 6.0.6002.2.2.0.768.3
Locale ID: 4105
Additional information 1: 98f6
More information 2: 87675ed52f92c29ca9743f9c4f847526
Additional information 3: b07c
Additional information 4: d49704ac1ed176b8d532f7a86e9f442bAdditional information about the problem
Bucket ID: 204865927 =.Product
System event COM +.Problem
Stopped workingDate
18/04/2011 12:55Status
Report sentSignature of the problem
Problem event name: BEX64
Application name: svchost.exe_EventSystem
Application version: 6.0.6001.18000
Application timestamp: 47919291
Fault Module name: netprofm.dll_unloaded
Fault Module Version: 0.0.0.0
Timestamp of Module error: 4791ad84
Exception offset: 000007fef3cd3820
Exception code: c0000005
Data of the exception: 0000000000000008
The system version: 6.0.6002.2.2.0.768.3
Locale ID: 4105
Additional information 1: 98f6
More information 2: 87675ed52f92c29ca9743f9c4f847526
Additional information 3: b07c
Additional information 4: d49704ac1ed176b8d532f7a86e9f442bFiles helping to describe the problem (some files may be is no longer available)
Version.txt
AppCompat.txt
Memory.HDMPAdditional information about the problem
Bucket ID: 215206108 =.conduit
Host process for Windows ServicesProblem
Stopped workingDate
21/04/2011-21:03Status
Not reportedSignature of the problem
Problem event name: BEX64
Application name: svchost.exe
Application version: 6.0.6001.18000
Application timestamp: 47919291
Fault Module name: StackHash_9cfd
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 00000000
Exception offset: 000007fef2d13820
Exception code: c0000005
Data of the exception: 0000000000000008
The system version: 6.0.6002.2.2.0.768.3
Locale ID: 4105
Additional information 1: 9cfd
More information 2: aea2a0d7a408bfb90d70a40b35741536
Additional information 3: add1
Additional information 4: e86fd8f76207b04502fc8a8c6058a723
=======================================Product
Internet ExplorerProblem
Web page display problemDate
20/01/2011 16:30Status
Report sentDescription
A display of a webpage caused problem refreshing the page using the Internet Explorer compatibility view.Signature of the problem
Problem event name: MSHTMLLAYOUTHARDASSERT
AppName: iexplore.exe
AppVer: 8.00.6001.18702 (longhorn_ie8_rtm (wmbla). 090308-0339)
ModName: mshtml.dll
ModVer: 8.00.6001.18702 (longhorn_ie8_rtm (wmbla). 090308-0339)
Offset: 0x003D6226
The system version: 6.0.6002.2.2.0.768.3
Locale ID: 4105Additional information about the problem
Bucket ID: 1530749661 =.Fault Module name: netprofm.dll_unloaded
Fault Module Version: 0.0.0.0
@ Poppyjoe.Joe
Find out why this module is still used even if he was apparently discharged? You can use ProcMon or DepedencyWalker to get more clues to this topic.Good luckRobert Aldwinckle
--- -
Satellite L645 - problem with Internet connectivity Wireless 'limited access '.
Hi all
I recently bought a Satellite L645 laptop, however, there is a big problem. Whenever I connect to a wireless network, it will connect in a minute, he removes the connections and said "limited access", he could return by being connected but then back with limited access, so. However, when the laptop is connected to an ethernet internet cable works. I checked and the driver is updated, it is a defective material? software? is there something I can do? Help, please...
Thank you.
Hello
Here the material is ok.
You must disable for the Wlan to save energy.
You can do it in 7 QL power management.
In addition, go to-WLan card-> properties > Device Manager
You will find a named tab to save energy. You should uncheck the option here that allows the computer turn off the Wlan device to save energy. -
When I go online on Skype, my internet will with limited access, and I'll offiline
When I go online on Skype, my internet will with limited access, and I'll offiline
Hello
1. which version of Skype is currently installed on the computer?
2 is this problem limited only when using Skype?
3. what type of Internet connection you have (cable modem, DSL, or something else)?
4 when it disconnects what do I you end up doing for her return to the connection?
5. What is the exact error you get that tells you that the device is disconnected?
6. what version of operating system you are using on the computer?Method 1:
I suggest you run the network troubleshooter to check if it helps.Troubleshooting network in Windows 7 using:
http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7
You can provide the network store event logs.Method 2:
You can update the latest drivers of NIC manufacturers.Windows 7: http://windows.microsoft.com/en-US/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly
Windows Vista: http://windows.microsoft.com/en-US/windows-vista/Update-a-driver-for-hardware-that-isn ' t-work properly
The question you have posted is related to Skype and would be better suited to the Skype forum community. Please visit the link below to find a community that will provide the best support.
http://Forum.Skype.com/ -
WRT54G2 Dropping connection with active Access Restrictions
Recently, we have replaced Nano from my 13 years with a key, which means that it can now access the internet from (almost) anywhere in the House. So I did some research and found the WRT54G2 of Access Restrictions.
I got the WRT54G2 for 5 years, and it has been extremely reliable. I'm a programmer (although, ironically, not necessarily PC-savvy!) who works full time at home, and I have no problem with the network. But now that I have implemented Access Restrictions, he abandoned his connection once or twice a day. So it falls, it becomes quite slow. Once it comes down, I unplug the router, wait 60 seconds and plug back in. Then everything works again.
I found no other people (in the forums) mention the same problem, but I hope someone can help out me.
Access restrictions are the following:
- Status: activate
- Change the list of PC: IP range 01:2 ~ 254
- Days: every day
- Opening hours: 24 hours
- Blocked Services: NO
- Blocking of the website with URL: white
- Blocking of the site by keyword: naked, nude, etc...
I have 3 polciies due to the number of keywords I am trying to block, given that each policy allows only 6 keywords. Policies are all set to the top in the same way except, of course, the key words.
The WRT54G2 is model V1, and the version of the firmware is 1.0.01. The upgrade of the firmware help? Download from Linksys for model 1.0 page, says "no available firmware/driver download.
Access restrictions, "IP Range 01" should be in 100 ~ 149 instead of 2 ~ 254? I am train to restrict our family office, my laptop, iPad and keys - anything in the House with internet access.
Thanks in advance for your help.
Yes, I think that any other additional filtering that by default will slow down most any router. It is probably more problematic for wrt54g2 because if it is little CPU and memory.
I guess you can try to reset to the default values and reconfigure him from scratch. But still, I don't think that the wrt54g2 has a very large CPU that can handle a large number of filtering.
Maybe try a solution like Norton DNS DNS? Or open DNS? Instead of access restrictions. I don't know, I'm not real experienced with access or parental control restrictions.
-
HP Pavilion g6 2210ss (Windows 8) with limited access
I use a laptop HP Pavilion g6-2210ss in a house where there are many different computers and laptops connected to a router via wifi and LAN. All computers are connected to the internet without any problems except the laptop mentioned.
This laptop is the only one that is currently running Windows 8. I tried ethernet and wifi on that computer connections and none of them worked; I can connect to the network, but I still get the warning message "limited access". If I try to open a web page, I get the message "no connection".
I tried to uninstall and restart to update drivers, select supplier list, netsh commands, routers... None of them worked. Any ideas?
Hi HandyAndy14,
Thanks a lot for your answer. I solved the problem, two days earlier, sorry for not having informed here.
I found this information on HP Support website:
The problems of Internet connection to broadband (Windows 8)
I tried almost all the proposed solutions without success. However, the last of them work: HP System Recovery.
After the factory restore, I have had access to the internet as before. I'm just not day to 8.1, just in case.
At one point, I had a problem when the keyboard no longer works, but with the help of the virtual keyboard of Windows 8 and this link, I have found a solution:
Pressing the keys does nothing (the keyboard does not work)I hope this helps someone else.
-
Wireless Internet with 'limited access '.
I tried to connect my new laptop Dell Vista to our network wireless at home. After many unsuccessful attempts (due to an unknown "logon doamin") I was finally able to connect to our server, however, with "limited access". Despite having "limited access" internet still does not work. Is anyway to solve this? We currently have two other laptops that work well on the wireless network.
Hello
Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
Update your WiFi drivers on computers. How you are positioned in the router? Are there
obstacles in the path? Make sure that the computer is trying to connect to the correct router as there may be
another strong signal near her.Other Vista computers? You use the WPA/WPA2 security?
Actually try updating your driver and disabling the network logon. Use a wired connection or download
pilots on another machine and transfer on removable media.Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlDownload - SAVE - go where you put it - right click – RUN AS ADMIN.
You can download several at once however restart after the installation of each of them.
After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
manufacturer of system become your backup policies).Repeat for card (NIC) network and is a good time to get the other updated drivers as Vista like
updated drivers.I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
are almost always old, and you can search drivers manually as needed.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx------------------------------------------------------
Make sure you know the details of connection to your wireless router - SSID and password.
You lose connection when you do and have to redo your logon.
Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
lower left click on merge or delete network locations - REMOVE all instances of your network (and the
others you don't use anymore) - REBOOT. Start - Connect To log on to the network.-----------------------------------------------------
Check this box:
Strange problem with Internet under Vista
http://www.catonett.com/blog/archives/194Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
http://support.Microsoft.com/kb/928233/en-us----------------------------------------------------
And:
Network connection problems
http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspxI hope this helps.
Rob - bicycle - Mark Twain said it is good. -
Listener to refuse the connection with the following error ORA-12505
Hi everyone, Am really new to the oracle database, I work on my school project work and am stuck in the middle of this error (listener refused the connection with the following error ORA-12505).
I started the time serveral listener and it is said that 'no service supported by the LISTENER', I can't access the database via sqldeveloper including trows on the same error (listener refused the connection with the following error ORA-12505, TNS:Listener currently know of SID given in connect descriptor.) In addition, my em show red arrow down to the listener. Here are my coordinates hard & software.
Oracle 11.1.0
OS: Red Hat Enterprise Linux 4 (running the operating system through Vmware workstation)
TNSNAME. ORA
LISTENER2 =
(DESCRIPTION_LIST =
(DESCRIPTION =
((ADDRESS = (PROTOCOL = TCP (PORT = 1522))(HOST=localhost.localdomain))
)
)
AUDITEUR1 =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST=localhost.localdomain) (PORT = 1523))
)
)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP)(HOST=localhost.localdomain) (PORT = 1521))
Listner, ora
LISTNER_ORCL
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST=localhost.localdomain) (PORT = 1523))
(ADDRESS = (PROTOCOL = TCP)(HOST=localhost.localdomain) (PORT = 1521))
)
IMT_ADMI =
(= DESRIPTION
(PORT = 1522))
(ADDRESS = (PROTOCOL = TCP (PORT = 1522))(HOST=localhost.localdomain))
(ADDRESS = (PROTOCOL = TCP)(HOST=localhost.localdomain) (PORT = 1523))
(ADDRESS = (PROTOCOL = TCP)(HOST=localhost.localdomain) (PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = imt_admin
)
)
LISTENER_IMTADMIN =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP (PORT = 1522))(HOST=localhost.localdomain))
(ADDRESS = (PROTOCOL = TCP)(HOST=localhost.localdomain) (PORT = 1523))
(ADDRESS = (PROTOCOL = TCP)(HOST=localhost.localdomain) (PORT = 1521))
)
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST=localhost.localdomain) (PORT = 1523))
(ADDRESS = (PROTOCOL = TCP)(HOST=localhost.localdomain) (PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
I read on some forums that I need to edit somethings that am not sure cos I don't want to mess with the database, I need help on what to.
Thanks for the help in advance.(ADDRESS = (PROTOCOL = TCP)(HOST=localhost.localdomain) (PORT = 1521))
Try to edit listener.ora by:
(ADDRESS = (PROTOCOL = TCP) (HOST = HOST_NAME_OF_YOUR_DATABASE_MACHINE/OR TRY USING THE IP ADDRESS OF THE DATABASE SERVER MACHINE)(PORT=1521))
Just try to edit HOST = value line above. You must use HOST_NAME_OF_YOUR_DATABASE_MACHINE or IP OF the DATABASE SERVER MACHINE.Host name can be obtained by the hostname command on the database server.
With localhost, no one can connect to the database remotely.
Concerning
Girish SharmaPublished by: Girish Sharma January 11, 2013 18:26
then after the output of commands below:
lsnrctl stop
lsnrctl start
Wait 60 seconds...
ORACLE_SID =
sqlplus scott/tiger@tnsnameShow us what is happening now.
-
My connection says connected with limited connectivity
My connection says connected with limited connectivity, I checked that the password is correct and the type of security eg wpa tkip. He also says on the connected state arnd ipv4 and ipv6. Also when I put the cable in as doesn't pick up. I hope someone answers!
Hello
· Is this a wired or a wireless connection?
· Were there any changes made to the computer until the problem started to occur?
· Are you able to connect to the internet?
Step 1:
You can follow the suggestions in the link given below and check if that helps.
http://Windows.Microsoft.com/en-us/Windows/help/network-connection-problems-in-Windows
Step 2:
Connect the Ethernet cable and boot the desktop mode safe mode with networking and check what is happening.
http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode
See also:
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems
Hope this information is useful.
Amrita M
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
EX60 - lost the connection with the control device
After upgrading my 6.3.1 to 7.1.1 EX60 I get now "Lost connection with adjustment" and the touch control panel is located in a loop of spinning.
I also get the following in the web interface on the EX60 management:
ERROR: Connection of the touch panel
No touch screen detected when indicators forcedIf I go down to 6.3.1 it works again. I already rebooted and factory resets the device unplugged and reconnected the touchscreen.
Hello
Have you tried a factory reset touch by organizing the "!" symbol for 10-15 seconds seconds until it turns on and then pressing "mute" button two times.
Video posted on the following link
https://supportforums.Cisco.com/video/11930611/resetting-Cisco-teleprese...
HTH
Manish
-
Listener refused the connection with the following error
Hi all,
I faced this problem. So after searching the forum I found the most important command for this questions as follows but until now I have not found the solution to this problem
I have run the following commandsError: Listener refused the connection with the following error: ORA-12505, TNS:listener does not currently know of SID given in connect descriptor
results as followslsnrctl start lsnrctl service lsnrctl status
C:\Windows\system32>lsnrctl start LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 07-JAN-2013 00:28 :01 Copyright (c) 1991, 2010, Oracle. All rights reserved. TNS-01106: Listener using listener name LISTENER has already been started
C:\Windows\system32>lsnrctl service LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 07-JAN-2013 00:28 :06 Copyright (c) 1991, 2010, Oracle. All rights reserved. Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521))) Services Summary... Service "CLRExtProc" has 1 instance(s). Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service... Handler(s): "DEDICATED" established:0 refused:0 LOCAL SERVER The command completed successfully
C:\Windows\system32>lsnrctl status LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 07-JAN-2013 00:28 :08 Copyright (c) 1991, 2010, Oracle. All rights reserved. Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521))) STATUS of the LISTENER ------------------------ Alias LISTENER Version TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Produ ction Start Date 07-JAN-2013 00:24:39 Uptime 0 days 0 hr. 3 min. 28 sec Trace Level off Security ON: Local OS Authentication SNMP OFF Listener Parameter File d:\app\DELL2\product\11.2.0\dbhome_1\network\admin\lis tener.ora Listener Log File d:\app\dell2\diag\tnslsnr\DELL2-PC\listener\alert\log. xml Listening Endpoints Summary... (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc))) (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521))) Services Summary... Service "CLRExtProc" has 1 instance(s). Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service... The command completed successfully C:\Windows\system32>
It's tnsnames.oraThis is the listener.ora file # listener.ora Network Configuration File: d:\app\DELL2\product\11.2.0\dbhome_1\network\admin\listener.ora # Generated by Oracle configuration tools. SID_LIST_LISTENER = (SID_LIST = (SID_DESC = (SID_NAME = CLRExtProc) (ORACLE_HOME = d:\app\DELL2\product\11.2.0\dbhome_1) (PROGRAM = extproc) (ENVS = "EXTPROC_DLLS=ONLY:d:\app\DELL2\product\11.2.0\dbhome_1\bin\oraclr11.dll") ) ) LISTENER = (DESCRIPTION_LIST = (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521)) (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521)) ) ) ADR_BASE_LISTENER = d:\app\DELL2
# tnsnames.ora Network Configuration File: d:\app\DELL2\product\11.2.0\dbhome_1\network\admin\tnsnames.ora # Generated by Oracle configuration tools. ORACLR_CONNECTION_DATA = (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521)) ) (CONNECT_DATA = (SID = CLRExtProc) (PRESENTATION = RO) ) ) ORCL = (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = orcl) ) )
Please try with it:
ALTER system set local_listener ='(ADRESSE = (PROTOCOL=TCP) (HOST = hostname)(PORT=1521))';
I recommend you to change the value "localhost" to the hostname of the server.
Also try to ping the server name, example: ping serveroracle.comOnce the execute the alter system command, try again, please I hope your comments.
Published by: Francisco Riccio on 2013-ene-06 09:10
-
Outlook express hangs after the connection with the mail server
OE6 hangs after the connection with the mail server?
Make sure that the other machine is not check that the server so often a machine is not problems because it cannot be verified.
Try to delete the account, compact the folders and close OE and reopen it and add the account back again. Also make sure that the antivirus software is not interfere (see www.oehelp.com/OETips.aspx#3).
You can also telnet to the server directly from this computer to see if it works (see http://techhelp.santovec.us/pop3telnet.htm).
Sometimes it gets stuck in a message on the server and it can not get downloaded by OE, so it may be necessary to remove the message from the server, but if the other machine got, maybe it's not the question.
Steve
Maybe you are looking for
-
Password for user cpstevenson sending failed. Mail server SMTP.charter.net replied: [IN USE] account is locked by another session or for maintenance, try again.
-
flight simulator deluxe edition blocks error codes: Ox20e86983 & Ox84e2f48
Is someone can you please tell me the following error codes say that I get them at halfway in the Simulator deluxe Infant cescodessont Ox20e86983 & Ox84e2f48
-
Why the "pagefile.sys" file has a 2.45 GB in size.
In drive C size of "pagefile.sys" get increases day after day. At present, it has 2.45 GB size. Can someone explain to me the reason for his creation? Is it safe to delete? Any kind of help is really appreciated!
-
I got error 80073712 in update of the. I tried to fix it, but it appears that he cannot fix update please help. my system is 32 bit n os windows vista Home premium n I m remains to download the SP1 updates. pls help.
-
Cannot open the Windows Calendar - my first attempt to use
I am unable to get the schedule for Windows to open. This is my first attempt at home. It is on the taskbar with Contacts, electronic controls, etc. I went into default programs and WIndows Mail is checked. I clicked and nothing happens at all. H