Aero support or not?

Similar Questions

• How can I find and close a program using mirror drivers? My Aero effects do not work because of this

  Aero troubleshooting said to me that ' a running program using a mirror (a type of display driver) driver is not compatible with the Aero visual experience. " In order to display Aero effects, close all programs that use mirror drivers, such as Windows and Windows Live Mesh Remote Assistance. »

  The Aero effects worked well earlier in the day. I had to get help for problems with HP printer and I allowed them access to my computer and they deleted and reinstalled the printer files and that works fine now but the Aero effects are not.

  I'd appreciate any help.

  Hi kristopher_tn,
      
  If it helps, try the steps and check them off below.
  1. click the Start button, type devmgmt.msc and press ENTER.
  2. now in Device Manager, expand graphic cards, under the present, you should be able to see driver mirror.
  3. right-click on it and select Properties.
  4. in the Properties window, on the driver tab, click Uninstall.
  5. After uninstalling the drivers, restart the computer. This should install it automatically the appropriate drivers for it.
  
  For more information visit http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly

  Driver mirror are used primarily by vpn (virtual private network) / Remote Office Tools / Windows Live Mesh. Remove this driver may resolve these issues.

  
  Hope this information is useful.
  
  Umesh P - Microsoft Support

• My Aero notebook will not be stopped correctly, no more. Can you help me resolve this you problem?

  My Aero notebook will not be stopped correctly more and when I turn it on it said "it was not shut down properly.  Can you help me resolve this you problem?

  It runs on Microsoft Windows 7.
  I got messages saying something on a certificate.
  At the bottom I selected the hardware and the drivers, but I don't know if that's the problem.
  Hello
   
  
  1. you receive an error message/code? If Yes, what is the exact full error message?
  2 have you made changes on the computer before this problem?
  3 does take more time to shut down the computer?
   
  
  Follow the steps.
   
  
  Method 1
  To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
  http://support.Microsoft.com/kb/929135
  Note: Follow step 7 to reset the computer to start as usual after the boot process.
   
  
  Method 2
  Run the fix since the articles and if it helps.
  There is a delay when you stop, restart or log off a computer that is running Windows 7 or Windows Server 2008 R2
  http://support.Microsoft.com/kb/975777
  You can't do a computer that runs Windows 7 stops or sleep
  http://support.Microsoft.com/kb/977307
   
  Run a virus with Microsoft Safety scanner scan and check if the computer is infected.
  Method 3: Microsoft Security Scanner free is a downloadable security tool that allows analysis at the application and helps remove viruses, spyware and other malicious software. It works with your current antivirus software.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  Important: when running Scan disk hard if bad sectors are found on the hard drive when parsing tent repair this sector if all available on which data may be lost.
  You can also download & run Microsoft Security Essentials on your computer.
  See the link: http://windows.microsoft.com/en-US/windows/products/security-essentials
   
  Response with more information to help you.

• DVD Studio Pro DVD "supported disc not available".

  Hello Forum,

  I am trying to burn a DVD again an already existing DVD Studio, already registered and created the file pro with all the menus related to the video file.  Another company created the DVD Studio pro menu and queue in front of me, I replace the newly edited video and try to burn a DVD with the new video and audio files.

  I compressed the file Compressor 3.5 using the button create DVD in the compressor, I created a file DVD SD Mpeg2, audio and video.  Imported in the pro Studio already created DVD file, I have the burned DVD, but appears to "Support disc not available" when I try to play the DVD on my Imac drive (also not tried in a standard DVD player no chance)... I tried this twice now, the first time that I realized I had created a HD DVD, I also created a separate folder on the external drive as well.  When I click on the DVD that was burned it shows as: HVDVD_TS and no audio file.

  Can you please help me, I watched the video of youtube after another, but I'm not create from scratch, I know not at all unfortunately the program, but I use a DVD already created Studio, file with many menus already linked to the video and don't want to not recreate from scratch... I think this should not be so difficult, and definitely miss me something.

  Thank you very much for your help!

  -Tony

  Open the preferences of DVD Studio Pro and set it up to create the SD DVD.

  -DH

• Commercial DVDs do not play on MacBook Pro.  "Not allowed" and "Supported disc not available" is displayed.  DVD plays normally when inserted in a different drive.

  MacBook Pro (15 inch, early 2011) / 2 GHz Intel Core i7 / 8 GB 1333 MHz DDR3 / OS X El Capitan Version 10.11.6

  DVD Player Version 5500.66 / Build 5,560 (2)

  When commercial DVD (NTSC) inserted in the MacBook Pro DVD Player error messages "forbidden" and "Supported disc not available" are displayed when I tried to play the DVD.  When the DVD was removed from the MacBook Pro and inserted into a different DVD player, it works normally, then the DVD was apparently not the problem.

  Your help is appreciated...

  Delete ' ~ / Library/Preferences/com.apple.DVDPlayer.plist ' and a DVD player or reopen could solve the problem.

• What are you doing for the era code 80151012. I spoke with Xbox live support could not fix it.

  What are you doing for the era code 80151012. I spoke with Xbox live support could not fix it.

  What are you doing for the era code 80151012. I spoke with Xbox live support could not fix it.

  Hi, Jason.

  the only way to fix this is to talk to xbox support, if they suggest you to do something you have already been told and they will suggest something else.

  phone numbers:

  * In the United States, to the Canada or Puerto Rico: 1-800-469-9269 or 1-800-4MY-XBOX

  See also this forum account issues:

  forums.Xbox.com/.../12.aspx

  Have you tried using another browser?  Google Chrome, Firefox?

  Contact for chat

  http://support.Xbox.com/en-us/contact-us?XR=footnav

• How can I fix my Dell Webcam Central to say "no supported webcam not connected"?

  I'm not sure how it happened exactly, but one day, all of a sudden, my webcam does not work! I've never had this problem before considering that I took of many photos & videos on this subject. I have a Dell Vostro laptop and when I got it, the Dell Webcam Central was already installed and integrated with the PC and I've used it since then. But one day, when I tried to open the webcam, it wouldn't let me take pictures or record video. It's just a black screen and at the bottom it says "no supported webcam not connected."

  I don't know what the problem is and I really need help!
  Thank you! :)

  Check the Dell website to see if there are any software update of the devices on your computer.

  In Device Manager, under any category you saw an ad for Dell webcam?
  If this isn't the case, I suggest that contact Dell because the material has been incorporated into the laptop.

  I hope this helps.

• Help and support does not work.

  Original title:

  win xp my help and support does not work

  Windows Help and support will not work

  Hello

  1. what exactly happens when you try to open help and support? You receive an error message?
  2. what service pack is installed in the computer?
  3 did you changes to the computer before the show?
  To resolve this issue, start the Help and Support Center service and set it to automatic. Follow these steps:

  (a) click Start, run and type Services.msc.

  (b) double click on Help and Support

  (c) to set the startup type on automatic.

  (d) to Start the Service.

  See also:

  Menu help and bootable media will not open

  http://support.Microsoft.com/kb/555329

  Registry warning:

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/)
  How to back up and restore the registry in Windows

  Let us know if it helps!

• HELP & SUPPORT DOES NOT OPEN

  Help & Support does not open. I have the msg "...". a service system does not work. To resolve this problem, start the service named 'help and Support '.

  I can NOT open help and support in order to start the service.
  Can you please help?
  Thank you
  John

  Hello

  ·         Were there recent changes made on the computer before the show?

  To resolve this issue, start the Help and Support Center service and set it to automatic. Follow these steps:

  (a) click Start, run and type Services.msc

  (b) double click on help and Support

  (c) to set the startup type to Automatic

  (d) start the Service

  See also:

  Menu help and bootable media will not open

  http://support.Microsoft.com/kb/555329

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

• I need a driver/files mouhid.sys, my mouse support does not work. Please thank you!

  I need a driver/files mouhid.sys, my mouse support does not work.  Please thank you!

  Hmm, a strange thing to have disappeared.  Do you have a virus or checked for malware scanner?

  The mouhid.sys file is supposed to be in % systemroot%\system32\drivers.  You pouvez find a copy of it in % systemroot%\dllcache.  If it's not in... \drivers and is in... \dllcache, recopy the... \drivers.  (You may need to do this in Mode safe.)

  Except for the above bit of luck, there are several ways to recover.

  1. use msconfig:

  Get your installation CD or locate a copy online
  Since an administrator account, run msconfig ( -R, msconfig)
  When "msconfig" opens, select the "Général" tab and click on the button "expand file...". »
  (This will open the window to "Develop a Source of Installation file")

  Enter 'mouhid.sys' in "file to restore:
  Enter the path to the DRIVER. CAB file in the \i386 on your installation media directory.
  (or browse to...)
  Enter "c:\windows\system32\drivers" in the "save in:" entry.
  Click "expand".
  'mouhid.sys' is now where never told you develop to...

  2 use the utility auditor of system files (SFC) to check the missing files and restore them if necessary.
  You will again need your installation media and, if you have installed the Service Packs, the CD-ROM for
  the latest Service Pack, you have installed.

  From an administrator account, type: -R, sfc/scannow

  SFC calls for, first of all, your installation media, and then later the service pack CD-ROM.  If SFC wants to replace the files, leave.  If the SFC rejects your Service Pack CD-ROM, read the KB900910 Microsoft Knowledge base article.  Note that this article applies to SP2, but is also applicable to the SP3.  Just use your common sense and use SP3 where the article refers to SP2.

  If you don't have a CD-ROM Service Pack 3, or order it (U.S. / Canada , Europe, Africa , Asia or South America ) from Microsoft or download the ISO (here ) and burn it.  Be sure to Select the appropriate language if you download ISO.  Note, I recommend that you install Service Pack 3 on a CD-ROM, rather than through Windows Update so that youpouvez use SFC with success!

  Please, vote if it is useful!  Please, click on Mark as answer if that answers your question.

• Help and Support was not able to start

  When I open help and Support Windows, it shows me the following error message:

  "Help and Support was not able to start
  For more information, contact your system
  administrator or visit
  http://windowshelp.Microsoft.com.
  
  
  (I'm the system administrator only)
  I am facing this problem for more than a year.
  System details:
  
  
  Windows Vista Edition Home Premium SP2 32-bit
  Internet Explorer version 9

  Hi Aditya,

  This could be caused by the virus or corrupted system files on the computer.

  Follow the following troubleshooting methods:

  Method 1:

  Download Microsoft Safety Scanner, then scan your computer for viruses and malware then check how it works.

  You can download Microsoft Safety Scanner from the link "scan to Microsoft Security.

  Note:  The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. All data that are infected must be cleaned only by deleting all of the data, which means that there is a risk of data loss.

  Method 2:

  Run System File Check to fix the corrupted system files and then check how it works.

  See the link "How to use the file system tool Checker to troubleshoot system missing or damaged files on Windows Vista or Windows 7" to run the System File Check.

  Note: It can ask the Windows DVD difficulty and allowing SFC to do more than minor repairs. Could some of the files saved on your computer are deleted when fixing corrupted files.

  If the problem persists, please answer. We would be happy to help you.

• Why does dell support does not, keep popping up

  Why does dell support does not, keep popping up

  Hello

  you will have to ask Dell Suport this question, because it is their software that you have problems with

  Dell suport

  http://support.Dell.com/

  or ask in the Forums of Dell Support

  http://en.community.Dell.com/support-forums/default.aspx

• using Windows vista and supported will not start

  Windows vista help and support will not start. Is it possible to download and re - install this feature.

  In addition to the guidance of Kim, I also recommend looking at responses MVP mind x here.

• WIndows Vista Help and support does not

  When I try to open the help and support, I get an error that says hel and support could not be started.  No code error or something like that.

  Hi StuartPaterson,

  Let's try a SFC scan to see if you have missing or damaged system files.

• Vista aero works do not, no black previews tab, HELP?

  My system has the requirements to run Aero Vista and worked it very well until one day I turned on the computer and it just show the classic Windows color scheme and the following issues were found.

  Things that work well:

  • Show settings display 32-bit and 60 Hz refresh rate.
  • GFX card drivers are up to date.

  The following issues have been found:

  • Windows Color and Appearance - no option when choosing appearance and colors, Windows Vista Basic and Aero when chosen not seen anything like that, but black. Windows Classic, Standard and high contrast options exist however and preview correctly.
  • Theme - choose Windows Vista previews correctly but when applied do not show the theme w / Aero but there the wallpaper and the only classic Windows pattern on this subject. Windows Classic watch blue background and the classic pattern of Windows.
  • When trying to install a new theme (not listed above) found on the internet, it doesn't show either no preview and black just directly in the preview area.

  Suite of solutions did not work:

  • Restart Manager Windows Desktop Services in services.msc and services theme.
  • Running /sfc scannow CMD w / administrator.

  What can I do?

  You can have defined the classic 'theme' and then set the color and appearance of Aero:
  1. click customization on "Themes."
  2. in the title of 'Thème' choose 'Windows Vista', if it is already set to Windows Vista, choose "Windows classic" instead. Click on the button "Apply" and wait.
  3. now, select 'Windows Vista' under 'Theme '. Click on the "Apply" button, wait, then the OK button.