Manually uninstall the labview
OK, so here is another thread to add between the sea of other uninstall problems. I tried to find a similar problem, but I don't anything that could help me. As a warning, its ok to laugh at this one.
This thread starts also similar to others. I made a dumb decision to delete the main folder "National Instruments."
(The reason for doing it in reality is because I have a student edition and a professional edition. I wanted to keep those two separate from their respective licenses but my first visit to the installation did not work. I have both let it install in the folder main and thought that they would use their own serial numbers: EVIL:. So I decided that I would put the system in safe mode, move this folder, and then reinstall the professional version (which aspires to have the watermark of STUDENT version when it will be used to create files for customers. This facility has failed... and well the story of the end is that I finally delete the two folders
So there it was. I'm sitting on a pile of # I made for myself. I have nothing in the Add/Remove Programs list, no program uninstaller, a mess in my registry and nothing will install (because he believes that its still as if by magic it!). So, essentially MAYDAY! This is a brand new computer and I want to ultimately have both versions of labview (and separated by their serial numbers). I would appreciate any advice. I learned my lesson, so please don't call me Thank you. I currently run windows 7. Labview versions are 2010 (Professional) and 2011 (student). I got a system restore, now I can uninstall correctly. Tags: NI Software How to manually uninstall the Toshiba Bluetooth Stack? Hey there, I have a problem with uninstalling the Toshiba Bluetooth Stack v4.00.20 on my laptop Windows XP SP2. Whenever I choose to remove the "battery Bluetooth for Windows by Toshiba" (or "Bluetooth HID Switch Service") the installation program starts to prepare, but crashes after a few minutes - the only way to continue is to turn off the laptop. :( The same thing happens when I try to update the stack to the latest version - the installer says that the old battery has to be removed first and crashes after trying to remove it. So is it possible to remove it by hand? I really don't want to reinstall Windows because of this. The reason why I want to uninstall or update the stack is because my Jabra BT620s headset does not work with it. I can connect and use it as the headphones (the music quality is good enough), but I can't use the built-in microphone. It works with the Widcomm stack but with this one I have quality problems. Thanks in advance. Hello What happen if you try to start the installation of the same version you already have? Manually uninstalling the program driver struggling for Photosmart C6280 I had problems that motivated me to uninstall and reinstall my driver. Unfortunately, the uninstall program has been damaged and did nothing. I tried to reinstall it on top of the current program but the Installer did not provide this option when he saw that the program was. I tried HP Print and Scan doctor but he said everything was fine. Ok no problem. If the C6280 software has been downloaded and extracted to your system: Impossible to uninstall the Sims Medieval I have recently installed the Sims Medieval and I thought that you download. The logo appeared on my desk and it was in my programs, but when I tried to install the Pirates & Nobles (expansion) he said that medieval had to be installed first. So I put the medieval drive in, but he started the uninstallation. When it has finished uninstalling I put again and he started again ONCE the uninstall. And every time it "Uninstall" it's always in my programs & features. So I tried to uninstall it from there, but I always get thid notification: Hello 1. what version of Windows operating system do you use? Click on the link below. Your question does contain all the required information necessary for us to help you. Please provide more relevant information to continue troubleshooting as a result. See the link below on how to ask questions or help on the Forums. Suggestions for a question on the help forums. http://support.Microsoft.com/kb/555375 I suggest you to manually remove the package from your computer as a result of the article. Manually uninstall the Sims Medieval https://help.EA.com/article/manually-uninstalling-Sims-medieval I hope this information helps. Please get back to us if you have any other questions on this subject. What do I need to uninstall Firefox4 Beta manually once the final version of FireFox4 get out? Can I just update Firefox4 Beta at the last stable Firefox 4 (when released) the same way I update Firefox3.6 or what I have to uninstall manually to avoid having two browsers FireFox? The beta version will be updated to the final version, but you will stay on the beta update channel. This means that, when there are security/stability releases for Firefox 4, you will before the official release. This is why they can be tested using a larger base of users before the official release. If you uninstall the beta version and then install the final version, you'll be on the normal update channel, so you will only be notified of updates after the official release date. I wrote two LabVIEW applications. The first acquires data from three different devices, displays the data and writes it to a file. The second application reads the data and displays it on the screen. Can I install the first application and run it, but I can only install the second application if I uninstall the first application. Any ideas as to why this is happening? You install applications by using a Setup program created with the application builder to LV? What LV version do you use? You have a dedicated for each installer build script, or do you still want to change the settings of a single build script (which would be a reason for this behavior!)? hope this helps, Norbert Uninstall the 32-bit version of labview and retain the 64-bit version How can I uninstall the 32-bit version of LV2009 and keep the operational 64 bit version? The 64-bit versions and 32-bit LabVIEW are independent. It is important to note that all modules are 64-bit capable. Here are a few web pages, with the frequently asked questions on the differences between labview 64-bit and 32-bit. http://zone.NI.com/DevZone/CDA/tut/p/ID/10339 http://digital.NI.com/public.nsf/allkb/71E9408E6DEAD76C8625760B006B6F98?OpenDocument Manual uninstall of the virtual host Hi there, we have recently installed a copy of demonstration of the virtual centre to help us move virtual machines from one ESX Server to another. For various reasons, including not having enough time to get acquainted, we couldn't get the Victoria Cross to connect properly, and he would never allow to connect to manage. Now, we need remove the management to a host ESX 3.5 connection, but can not. I did a post to remove VMware-vpxa - 2.5.0 - 119598, which was a success, but always when I open a client session to my host, it tells me that it is managed by a virtual Centre. Can someone tell me how to manually remove the VC client, without downing the server preference? We have already removed the software Center Virtual btw Thank you Checking the config license as mentioned above, then Restart mgmt-VMware "service mgmt-vmware restart '. Whenever I close Firefox, I have to open the Task Manager and kill the process manually. I uninstalled the flash plug-in and the problem is solved, except that now I can't use YouTube etc. etc. Without the Flash plugin browser normally works with it, not so much. I tried the reset nothing helps. I uninstalled and reinstalled Firefox and plug in and that fixed the issue. How do I uninstall the old version I have an older version of FF alongside FF10b, is it possible to run uninstall of the old version without affecting the settings of the current version? The software is in different directories, but I think they both access the same profile under AppData\Local\Mozilla\Firefox\Profiles See this - https://support.mozilla.com/en-US/kb/Uninstalling+Firefox But do not use the option to remove my Firefox data and user settings - which would be to remove your profile Firefox or profiles if you have more than one. How to uninstall a LabView Module? Hello While installing LabView 2009 (Windows XP), I have included accidentally a LabView (MathScript RT) module that I do not have a license. How to uninstall the module without screwing the rest of installation? JohnGrove salvation, Enter the system-> Add/Remove programs. Select the software OR. There you can select the item to remove. Mike Uninstall/reinstall Labview after disk crash Hello The question could have been invited already, but could not find an appropriate response, except to do something risky with the registry windows so I m asking my question here and apologize if a reply has already been given on this forum. I bought and installed Labview home Bundle a few months ago. Last week, my secondary hard drive, which contains the application crashed, and I do not have a backup of this partition. Windows still runs on a separate DSS and always having traces of installed applications, among which, information about the previous installation of Labview. "No problem' I think, ' I just re - download the installation package and try to reinstall it, like most other software, which simply replace existing information or re-use of old configuration data." Unfortunately, it did not work, and I have no trace of labview in the Menu Add/Remove Windows (except one "Instrument National software - this is the French version, I got" - brings me just an error when I try to use it, saying that Labview could already being uninstalled). Re-installing just brings me to an error, as a result: -The intallation process goes OK -The device drivers can not be installed (OK I did not at the time of any device) -The installation process, explains the installation is ok, but in the end, one "error 2 could not perform action license Labview Application" appears. -You try to start Lavview gives "the installation of this application is may be damaged. "Use Ad / remove programs in Control Panel to try to repair this program." Is any "Clean Remover" tool available from the Canadian standard. Looks like a Rube Goldberg machine too me... Thanks for any help I could get. Eric ______________________________________________________________________________________________________ I'm on the similar when questions re-installation or repair of LabVIEW, and I found that the best way to remove software OR before a re - install is NOT using the Windows Add/Remove utility programs, but to use the NIUninstaller. If you managed to make at least a partial installation of LabVIEW, you probably have the NIUninstaller installed. On my system, it's in C:\Program Files (x 86) \National Instruments\Shared\NIUninstaller. Run the executable uninst.exe in there and it will remove any items not removed by Windows. Then try a new installation. Good luck. Dan ______________________________________________________________________________________________________ Hi, thanks for the response. I found something similar on a Q & A of National instruments and already tried to find tha 'InstallValidator.exe' after I re-installed Labview, unfortunately, the NIuninstall folder / files were not installed with the National Instruments on my hard drive, so unfortunately, this solution does not work. I copied the NIUninstaller file (AND ONLY THAT) I found in the folder shared the LabVIEW to work and he give it a try. Don't know if its against National Instruments, policies, license and I apologize if it's, but having an app that I bought and can't install / reinstall is against my own policy. If the resettlement has be done right, the file would have been installed with the beam to origin. I know you if that does no good. EDIT: In fact, it worked. The "InstallValidator.exe" did nothing aprt to tell me that the entrance of registrey was OK, even if it wasn't. But the "uninst.exe' made work and installation from the Menu of repair that I couldn't access fixed front. Thanks again for your help guys. HP Deskjet e3520: manually uninstall Print Driver Hi all! I got myself in quite the situation when I tried to clean up some temporary files and save space on my rather small SSD. As such, I accidentally deleted the uninstall program for my HP print driver and now I can not uninstall the software, nor I can install newer software. The software is looking for a file, DJ352x64.msi, located at AppData\Local\Temp\7zS0DDA, but there is obviously no because, well, I deleted it. So, any advice on how to manually uninstall my driver's license so I can get my drivers updated? Thank you! -Stinger Hi @Stinger07, Welcome to the Forums of HP Support! I understand that you are unable to uninstall or reinstall the software for printer HP Deskjet-e3520. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos. I see that you have tried to free up space and accidentally deleted some elements of the software of the printer. We should be able to get the software working again. NOTE: Re-download the HP installer will put the new 7z folder in the Temp folder. Let's start by cleaning up your computer. Uninstall and reinstall the HP software. If you use a USB connection between your computer and the printer please unplug this cable now. Step 1: Remove the printer: We want a clean slate to install your printer on the computer Windows 10. Therefore, I will you ensure that no trace of your HP Deskjet does not currently installed on your computer. 1. click on the Start button 2. type programs and features. If a search does not start automatically, you will need to type programs and features in the area of "Ask Me anything". 3. click on programs and features to launch the window. 4. in programs and features, will populate a list of the programs installed on your computer. Please scroll down and look for your HP Deskjet. If you see your HP Deskjet in the list, click it and choose Uninstall. 5 follow the prompts on the screen to complete the uninstallation. Once the uninstall is complete successfully please close programs and features. 6. then, click on the menu start of new 7. this time type devices 8 click on devices and printers to launch the window.
9. in devices and printers are looking for your HP Deskjet. If you see if if please right click above and choose 'Remove' or 'Remove'. 10. Once your HP Deskjet printer is more than showing in devices and printers please click on any device in the list of Printers once just to highlight. Click the print server properties on top 11. click on the drivers tab 12. look for your HP Deskjet printer driver. If the list, please click it and choose delete 13. Select delete the driver only 14. Select OK
15 click apply and OK in the print server properties window. 16. close devices and printers. Please proceed to the next step. Step 2: Install the device: Once installation is complete, please try printing and scanning. Source published by my colleague X-23. If the problem persists, you can try the solution proposed in the thread below. (1) open the command prompt window by clicking on the Start > applications > Windows system > guest. Type: net stop spooler Enter: net start spooler 2) open Windows Explorer and navigate to: NOTE: any % is usually C:\Windows, but it might be "winnt" or something else; It is set when the OS is installed. Most systems are like this C:\Windows\system32\spool\drivers\w32x86 (3) in the w32x86 folder, there will be other folders and files. Delete everything inside, but DO NOT remove the w32x86 folder. 4) restart the computer - perform clean boot in Windows 10 / 8 / 7 Source Posted by a member of community jaredjb Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck! How do I uninstall the game, InkBall of Windows Vista Tablet I need to know how to uninstall the game "InkBall" of laptops running Windows Vista. Hi Dkatu, InkBall is a game that is integrated with the windows vista operating system. (1) i) go to windows features (programs and feature--> select enable the windows feature disable) (2) to go to c: Program files microsoft games-->--> remove the inkball here itself Hope that this would be useful for you. I have to manually install the driver for Aspire ZC-102, updates when I move Windows 8 to 10? I have to manually install the driver for Aspire ZC-102, updates when I move Windows 8 to 10? I was struggling with this ACER for more than a year. I have do it I have back when it was still under warranty, 14 months ago. Now I've updated free online through Microsoft for Windows 10 back in early August. I had hoped that my mess was a stack of the operating system, but unfortunately, it's still a piece. However, there is no virus. I run Malwarebytes Pro full time with it has quarantined of PUPPIES as well as McAfee Anti Virus full time. I use cCleaner to keep cut up. I NEVER garguillo or browsed porn. Even if this thing was a room at the time where it was running Windows 8 and 8.1, so I want to try to make it work on Windows 10 without having to start over with a clean install. That's why I asked about the drivers. your ZC-102 will not have a direct drivers updated from Acer support, which means you have to rely on Windows Update by itself the drivers or get them by yourself. Let me give you 3 Tips: 1) never use Registry cleaners Windows 8.x and above all, they are no longer needed (2) uninstall McAfee, he kills the performance of your machine, use the antivirus windows integrated, it is good and very light (3) If you require loading time fast on programs, think about an SSD upgrade Is the phone number and alarm warning screen I saw a scam? Just got a very a screen red background on my computer and a strong voice message, saying that the malware was attempting to invade my computer. He pretended to be Mozilla Firefox and told me to call 844-338-4651 for an easy solution to this problem. Can I restore a local folder that suddenly disappeared? A file in which I have accumulated messages with links to Webinars have disappeared from the local folders collection. I don't know how or why because I was not working with this file. The file manager (with hidden files visible) shows nothing of thi Assembly of the jammed scanner I have the HP Laserjet M1217 MFP nfw. It is no longer copy or scan. It seems that the scanner Assembly is stuck at halfway through the glass. When I restart the machine, it moves only about an inch, then come back. It also shows "error scanner 22" Update lost on a disc of windows 7 on the road. I bought a new laptop in 2008. It was installed with Vista. I received my free upgrade to Toshiba, brought back to Tennessee in 2010. Recently, after I had started to use another laptop for a few years, I had pulled out the old laptop and was wind What is color channels? What is curves? difference between CMYK and RGB? What is blending modes?
.Similar Questions
I tried to uninstall manually. I removed startup entries, registry entries and most of the files in the directory of Hewlett-Packard. 4 files will not delete even if I thought I had all the startup items. It says: "cannot delete hpqddcmn: access denied." Make sure that the disk is not full or write protected and that the file is not currently in use. »
My printer is a HP Photosmart C6280 all-in-One.
I have Windows XP SP3
The printer is connected by USB cable
1. type % temp % in the field of race
2. Locate and open the folder starting with 7z (example: 7zS2356)
3 open the Util folder
4 open the CCC folder
5. If you have an HP computer, run the L3uninstall.exe. If you have a computer not HP, run the L4uninstall.exe
6. once the uninstall is complete, restart the computer
7 run the Accessories\ System Tools Disk Cleanup
Or do I have to manually delete the old version.
Type: exit
%SystemRoot%\System32\Spool\Drivers\W32x86
I tried all of the obvious steps, but after the reboot, it is immediately.
On the network I am building, games of any kind is banned, so I need to remove it.
There are two ways you can remove it manually
(II) develop the games and uncheck inkball
(III) click ok
I've got max 16 GB of RAM. I have very few applications other than Office 2013.Maybe you are looking for
