Windows 2008 R2 Server error Stop 7B after Bare Metal Restore of VM.
I tried to make a bare metal restore of a physical server Windows 2008 R2 on a virtual computer, and although restoration is fine, when I restart the virtual machine after the restore, I get a STOP: 0x0000007B (see screenshot) error. I was able to find all kinds of '' correction '' online, but none really solve the problem. Someone at - it else done this and can provide a solution? Thank you.
LSU
As for your suggestion concerning the audit of the controller and then using vSphere converter, do you want to say I point the converter on the VMDK 'broken' and choose a Machine configuration option?
What you can do with VMware Converter, is to run the Machine "set up" against the power off VM (simply select the virtual computer after connecting to the host or vCenter). I mentioned to check the controller before doing this, because this controller is the default configuration for the operating system you use.
André
Tags: VMware
Similar Questions
-
After a PtoV for a Windows 2008 R2 server, a disc is not visible
Hello
I just used the converter to make a PtoV for a Windows 2008 R2 server with 2 drives and the C: drive is there but the D: drive is not while there are several devices CD/DVD virtual results.
In the converter D: drive has been cloned successfully and it is visible in the data store.
Tahnk you for your help.
Concerning
Daniel
You must check your "Disk Managment" for your disks and their mount points. HTH
-
Manager Update 4 will not scan or clean up the Windows 2008 R2 server
I just install a Windows 2008 R2 server, and Update Manager will not analyze it. It just says: "Failed to scan or clean up SERVERNAME because of operating system not supported or unknown. I can scan and clean up my plain Windows 2008 servers very well. R2 is still not supported?
I do not remember R2 being in the list of supported operating systems, I believe that this is also the case for the 4.0u1 VUM or VUM 4.0u1.1
You'll probably want to make sure that the release notes, but if the error message says that it is not taken in charge, probably only is not supported.
=========================================================================
William Lam
VMware vExpert 2009
Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
Introduction to the vMA (tips/tricks)
Getting started with vSphere SDK for Perl
VMware Code Central - Scripts/code samples for developers and administrators
If you find this information useful, please give points to "correct" or "useful".
-
VMware Server on Windows 2008 R2 Server Core installation
Hi guys!
I installed the latest version of Vmware server on our new Windows 2008 R2 Server core installation, but I have a problem with it. When I create a virtual computer and try to start the Web UI:
General system error occurred: unable to connect to the virtual machine
Do you know something about the nature of this message? The Server service not had access to the possuble vitrual machine? But how can it create if it doesn't have access? I have not found the log files created in the folder of the virtual machine.
Thank you for your help.
Kind regards
Jeremy
I think that Server Core is an unsupported operating system. Please take a look at http://www.vmware.com/pdf/vmserver2.pdf (page 25)
concerning
Jose Ruelas B
-
Disabling RC4 encryption in the Windows 2008 SP2 Server
Hello
I just saw through the 2868725 Ko to disable the RC4.
According to the article, we need to install the KB update, then we need to change the values of registry keys to disable the RC4.
However, I could not find the download for the Windows 2008 SP2 server file in the download link
https://support.Microsoft.com/en-us/KB/2868725
Any suggestion how to disable the RC4 in Windows 2008 SP2.
Need help.
Thanks in advance.
Here is the link for the Microsoft TechNet forum:
http://social.technet.Microsoft.com/forums/en-us/home?Forum=w7itpronetworkingSeveral related to the server forum (not for Desktop/Win7)https://social.technet.microsoft.com/Forums/windowsserver/en-us/home?category=windowsserver
-
Windows 2008 storage server shows 0 KB file size
We use Windows 2008 storage server standard with Service Pack 2. Now we are facing the issue is Some of PDF, EXCEL, DOC files show in size 0 KB file, we are unable to open this type of file, if anyone knows pl give me the solution
Hello
I suggest you to ask your question on the link mentioned below that this forum is best suited for your question.
http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/
I hope this helps!
-
My computer is connected to the Windows 2008 R2 server and some of the users on this computer receive their network drive mapped on group policy and some do not. I find nothing in Event Viewer that shows that there is a problem. Please let me know what to do to get the disks appears
Original title: Network Networking file sharing file sharing file sharing file sharing discovery sharing Fileshare share shared
Hi,
The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.
TechNet Forum
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer
Hope this information helps.
-
How to fix the "Creative Cloud server error" "stop synchronization?"
I tried to turn on "file synchronization" and "Creative Cloud server error" 'stopped Sync' is constantly since the notification of task jump bar upward. All other features work fine except file synchronization.
I logged into my account and manually downloadd files, I restarted, I signed in and out and back CC, but always without success.
JohnGoodayPhotography, SeriouslySam.
Please, try the following steps:
1. open the desktop creative cloud application.
2. click on the icon 'speed' to bring up the menu.
3. with the menu remains open, hold down the CTRL key.
4. all holding the control key, choose "exit".
5. wait a few seconds (about 1 minute).
6 remove this directory:
C:\Users\
\AppData\Roaming\CoreSync 7 repeat the creative cloud desktop application.
Note: The AppData folder is hidden by default. This document explains how to show this folder:
http://helpx.Adobe.com/x-productkb/global/show-hidden-files-folders-extensions.html
Please let us know if this does not solve your problem.
Thank you
Ben
-
Windows 2008 R2 server slow printing
We have about 5-6 servers Windows 2008 R2 in our virtual machine environment. All of these servers are servers very low utilization, and they all work very well. We have a few domain controllers, a SQL box and a few boxes of web application that is running IIS. One of these domain controllers is a print server. The print server works well, but it is very slow. If you right-click on any printer that is added to any of the customers and go to properties, where the server is the management of print server, the client must wait 30 seconds or more for the upcoming dialog with the properties. You can click between tabs, but the legs are also slow to react.
This means that if you make changes to the print job or the margins, for example, it may take a minute of waiting between screens.
Now, we had a physical Windows 2000 print server that has worked well until we got the VM environment, so I know the problem is in one of a few different areas.
1. it could be the VM environment.
2. it may be Windows 2008 R2 server config or the server software itself.
3 might be x 64 bit cause a problem with 32-bit clients using the box.
I have excluded #3 by a 32 bit 2008 Server on the VM environment of loading, loading of print management and then by loading a single printer and share it. The problem is still there on the current server. My next step is to try Windows 2003 server in virtual machine environment, but before I do, I want to throw this question very curious to the VMWare community. All I have to do before moving on to more drastic measures? There must be something I can do to solve the problem.
Maybe it's the solution. Will test:
-
Can I install Windows 2008 R2 Server on a PowerEdge 2850 Server?
I have a PowerEdge 2850 server, that when he was initially put in place (by someone else) had Windows 2003 R2 top. However, when they put in place, the partitioned the C: drive with so little space that it is running out of space. We got a newer Dell server and I turned that 2850 off the coast. It was interrupted for a month or two.
But I would like to use it as a backup of database server. Can I install Windows 2008 R2 Server on a PowerEdge 2850 Server?
You need to install RAID drivers during the installation of 2008R2.
- Configure and initialize the RAID in the CTRL-M utility.
- Download and extract the drivers put on USB (or CD).
- Start on media 2008R2.
- On the screen that asks you where you want to install Windows, click on load a driver link at the bottom left.
- Navigate to the location of the RAID drivers.
- Choose the drive to install, then install.
-
Get errors when you try to activate Windows 2008 Standard Server
I upgraded my server from Windows 2000 to Windows 2008. When I try to activate Windows, I have the error first:
Activation error: Code 0x8007232b
DNS name does not existSo find kbase ID of Article: 929826Tried to load my product key again from the command prompt:slmgr - ipkNow I get error:0xC004C003 error code
the activation server determined that the specified product key is in useThis forum is not compatible Windows Server, you need to create a new post on the TechNet forums for assistance: http://social.technet.microsoft.com/Forums/en-US/winservergen/threads
-
I upgraded my server from Windows 2000 to Windows 2008. Initially when I try to activate I get the error:
Activation error: Code 0x8007232b
DNS name does not exist
So find kbase ID of Article: 929826
http://support.Microsoft.com/kb/929826
Tried to load my product key again from the command prompt:
slmgr - ipk
Now I get error:
0xC004C003 error code
the activation server determined that the specified product key is in useI went through all the information on product activation, sought help windows, answers, google, still cannot find how to solve this problem.
Made through the Windows Server 2008 Product Activation helps too.
I don't want to go beyond the 90 days for activation and started having problems with my Windows Server!
Please repost your request in the most appropriate Forums of Windowsserver. Thank you.
-
When you try to add a new computer Windows Vista (hqseven) to a Windows 2008 network, I get the following error message... "An attempt to resolve the DNS of a domain controller in the domain being joined has failed. Ensure that this client is set to reach a DNS server that can resolve DNS names in the target domain. "Last year, I added two XP, a Windows 7 and another Vista box to the field. I don't know why I can't add my new Windows Vista computer.
I am able to get on the internet with the Vista PC. I can RDP to the domain controller (hqserver64) or any client. (using the name of host or static IP) I can also do a ping of the domain controller (DC) or any another computer on my network using the host name.
After initial search for information, I found the following error message when you do a nslookup from my new vista box.
Nslookup mydomainnameServer: hqserver64.mydomainname.netAddress: 192.168.0.99
hqserver64.mydomainname.NET cannot find mydomainname: Server failed.
I do not understand why I suddenly get these error messages when I was able to reach this area in the past.
Hello Stan Smith,
Thank you for visiting the Microsoft answers community site. The question you have posted is related to Windows 7 in adomain of work environment and would be better suited to the TechNet community. Please visit the link below to find a community that will support what ask you
http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads
Hope this helps J
Adam
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
Problem of ThinApp IE9 for Windows 2008 R2 Server Citrix
Hello
I'm trying to make a package for IE9 I'll be able to run on Server 2008 R2 running Citrix 6.5
so I made this package by installing a windows 7 ent vm workstation and I capture the IE9
now on this virtual machine with windows 7, this package work very well and also on my pc running windows 2008 R2 it also work correctly
but when I try to run on no matter which of my new citrix servers open IE9, and then it shows this error popup:
"A display problem (page name) caused Internet Explorer Refresh the Web page.
and then freeze IE9. (this happen for IE9 32-bit and 64-bit, my servers are all 64-bit)
now, I'm working on it for a week now and I have googled all the net and I found every article I can find on this error
and I have tried everything with no success
now, the only difference between my PCs running on windows 2008 R2, and Citrix servers are that my pc is a physical pc running Intel i5
and all my citrix servers running on Vmware esxi 5.1 platform and I don't put all windows update install on my pc and I have Citrix install all updates from Microsoft.
So it can be a hardware problem in the context of the article I found say that it may be related to the video card driver, but if this is the case how it works on the virtual machine with windows 7 running on the same server esxi
and it can also be an update from Microsoft that makes this problem or it may be something that I don't think and that I need your help
the IE9 which are installed on my citrix server run ok and there I have no problem but the IE9 in the package I build gives me this error
one more strange thing is that in my package I didn't enter any home page and when I run this package it take home page I put in the local server as my homepage
I also build a package for IE7 and present a work very well and there it didn't happen for me that the homepage on the server has been set as my package's home page.
now, I'm trying to build this package as insulated and uninsulated and it made no difference regarding my problem, or to the homepage that originate from the local server.
so I need some help here, and I need it ASAP
Thank you
Your
Tamir
Hello
I found the cause of my problem, after all the test I did has been updated to Microsoft KB 2670838
who get the users name in the net as the WRONG UPDATE
After I remove this update that are not at all necessary and is also define who you just have it as a prerequisite for upgrading IE to version 10
IE9 begin to work my package.
So if someone of you will have a problem with IE9 and time does take to load pages remove this update.
Tamir
-
Why Windows 2008 R2 Server Foundation has received limited permissions?
I install a software of SAP on a Microsoft Windows Server 2008 R2 Server (Foundation Edition) on a HP Proliant server.
The installation fails to access to the registry key 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servi '.
The exact error message is "unable to open silsvc. An error prevents opening this key. Details: access denied. »
When to use REGEDIT. EXE to display the registration key, it reports that access is denied to view properties (not to mention changing permissions).
Why this registry key entry is locked against the administrator?
What can I open as long as the user TrustedInstaller?
Alternative workaround?
Concerning
Joe Oppenheim
Hello joppenheim,
You question would best address in TechNet for the Windows Server 2008 forum.
Click here for a link to transfer your question in the TechNet forum.They have Windows Server experts who will be able to help with your problem.
Thank you
Marilyn
Maybe you are looking for
-
QUICK FACIAL RECOGNITION ACCESS WILL NOT WORK ON DELL STUDIO 1555 FROM MOZILLA UPDATE
When Firefox updated my face recognition fast access on Dell Studio 1555 is no longer works. The box shows but not green line around it
-
Remove wincore mediabar
-
Error of the main battery (internal) "601".
I have this error when I turn on the laptop: main (internal) battery error "601". From software battery check I have check the battery and software say: This battery works fine but it needs to be calibrated. But I can't calibrate the battery. I think
-
How to uninstall the printer driver
I have a HP Officejet Pro 8600 (N911a) installed on my PC Windows 7 Home Premium and it worked perfectly for several months, but suddenly a few months ago, he began to cause trouble: powering the printer after the PC, the PC could not connect to the
-
As I have said on the subject my CD/DVD drive does not open and it will not read. My computer sees the problem but has no solutions. That I am, I expected to do?