After a virus attack, my system is no longer enabled. I tried activation but an error message.

Similar Questions

• After replacing a lost critical system file, I can now initialize & get online, but I have no sound.

  After replacing a lost critical system file, I can now initialize & get online, but I have no sound. How can I activate the sound back?

  original title:. Its Windows XP problem

  Hi Delno,

  I suggest to check the connection of the wires to the speakers and then follow the steps in the article.

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Let us know if that helps.

• After the connection to my computer today and to go to YouTube, I get this error message on my screen: "Microsoft Visual C++ Runtime Library error - failure of the Assertion.

  After the connection to my computer today and to go to Youtube, I get this error message on my screen.

  The assertion failed!

  Program:...
  File: common\npn_gate.ccp
  Online: 267

  Expression: pPluginShim

  I try to press abandonment and try again but nothing happen.

  Hi Shadwik,

  Thanks for the reply.
  I did as you said. It has been effective. But only to play the first video clip on youtube. With the next video, the error appeared again. I looked at the programs and saw the customer to be automatically updated to 11.3 flash...
  After that I tried to read a music video by realplajer and who has a problem too. by seeking out them in true originator, I founded there a conflict with the 1.3 flash payer... and disabling the Web download & recording of Realplayer was the solution finally.
  After that my PC works fine.

• Cannot restore the system after a virus attack

  After infection by several virus Trojan horse my computers hit by the old blue screen of death.

  The system can operate in safe mode with networking, but will not boot normally without returning instantly to the blue screen.
  The system restore program will not work in safe mode, because he says has no date set to roll back, when I try to set a date to roll back it comes to properties system saying that it should be returning it on the system protection.

  All the solutions to put an end to my plague of blue screen and a restorableness?

  Hello!

  Sorry, but I think that in this case, the only solution is to reinstall Windows. :(
  If SafeMode doesn t you nothing and sometimes viruses destroy the system roll back function.

  I had a similar problem a few months back, and the only solution is to reinstall Windows. I had no change to remove the virus.

  Good luck!

  Good bye

• Hidden option is disabled after a virus attack!

  Hello

  Operating system is Windows XP Professional, after a virus has attacked the computer I had removed it, now some cases have become hidden, but when I go into properties I find inactive hidden option!
  Anyone know how to solve this situation?
  Thank you

  Hello

  Method 1: Most of the time this problem is due to a Virus and Trojan, I recommend you perform a virus scan on your computer by clicking on the link below

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 2: Modify the registry to show hidden files.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: How do I back up and restore the registry in Windows http://support.microsoft.com/kb/322756

  a. Click Start, type regedit in the search box start and press ENTER.

  b. navigate to the location HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Advanced\Folder\Hidden\SHOWALL

  c. in the right display pane, select the checked value.

  d. right-click and select Edit.

  e. replace the value 1.

  Let us know if that helps.

• Wireless network option is missing after the virus attack.

  Original title: restore wireless...

  After the restoration of xp following an attack virus (cridex.e among them), I have no wireless network option.  Essentials of security has not detected any virus 4

  who were present.

  Hello

  1. do you receive any error messages?

  2. What is brand and model computer?

  Method 1:

  See the following site:

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  http://support.Microsoft.com/kb/870702

  Note: Also applies to Windows XP SP3.

  Method 2:

  See the steps in the site mentioned below:

  To connect to an available wireless network

  http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/wlan_client_connect.mspx?mfr=true.

   

  Method 3:

  Install the hotfix.

  See the following site:

  Network connection icons are missing from the network connections folder in Windows XP

  http://support.microsoft.com/kb/894543.

• After a virus attack, I am unable to connect to the server from any client computer.

  I have a small net work in my house, and until yesterday, the network works well. MSSE has cleaned up win32 virus attack yesterday and here after that I am unable to connect to the server of customers while I was able to connect to server cleints. Infographic customer request user LRN & passwiord against which I entered the data from the server connection, but it displays the sdame error message. PL help someone who will be widely recognized.

  Thank you best regards &.

  Gandhi Prasad

  original title: connection from the Client to the network problem

  Hello

  Your question (Windows XP) is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public Server on TechNet. Please post your question in the Windows Server Forum. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• Laptop does not start until after the virus attack

  Last night I was browsing the web when suddenly I got a lot of warnings of viruses Microsoft arise. I immediately disconnected and then ran a full scan of the system of McAfee, but he can't find anything, so I keep the laptop. Now when I try to start it, just at the point where the wallpaper appears (but), I get the following message - "Data Execution Prevention - to help protect your computer, Windows has closed this program - converter of Cookie by Microsoft. The boot process and then stops and goes no further. I then click "close message" (which is the only option), then get a 'Cookie converter has encountered a problem and needs to close... ". "Please tell Microsoft this problem"... window. The laptop remains frozen, regardless if I click 'Send error report' or 'do not send '. My only option then must he put off, which seems to be quite normally, i.e. "Logging Off" followed by "Windows is shutting down".

  I tried booting in safe mode and also "safe mode, last known good configuration", but exactly the same thing happens every time either I can't past the error message above.

  Can anyone suggest what I can try?

  I am running Windows XP SP3 and I am up to date with all Windows updates.

  I agree with Akuma.

  In this case backup your data and use the Toshiba Recovery disk and reinstall Windows. It only takes a few minutes and not so long as trying to correct the problem.
  I think it would be the best solution because the same phenomenon occurs in safe mode and last known good configuration.

• Missing components of Vista after the virus attack

  Original title: Virus turned away from windows. Has managed to remove it, but now the system has missing parts.

  It took a while, but I finally got deleted. It looked like a Flash update and then took the whole computer. I have an older version of ERD Commander and boot from the CD to remove it, then restarted Windows and Security Essentials removed the rest.

  My problem now is a lot of Vista is missing. No trash, quick launch, can't change background image. How to restore these items?

  Hello

  run this program to check it is all removed

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not correctly remove problems it can't find and or work in normal mode only the above work in SafeMode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  and follow these steps too:

  Just in the case where it damaged some drivers

  Make sure you have the latest vista drivers for your computer which you can get your computer manufacturers Web site

  go to their website and look for a driver and software download section

  Enter your model number for the last look drivers vista then download and install

  also run the sfc/scannow command.

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

  If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation

  read the below tutorial on how to perform a repair installation

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

• After the virus infection and put, can no longer play games on Facebook or Pogo

  While playing a game on facebook my avg detected 6 viruses and malware activity, I quarentined them and removed the virus, I did a full computer scan and found nothing. Now I can't play the games on facebook or on pogo but can through google chrome and firefox browsers but not explore what could be the problem.

  Hello

  ·         What exactly happens when you try to play the games on Facebook or pogo?

  ·         You receive the same error message while playing these games?

  ·         What version of Internet Explorer is installed on the system?

  I suggest you to make sure that the latest version of the flash player is installed on the computer.

  Install Adobe Flash Player from the link provided below.

  http://get.Adobe.com/flashplayer/

  If you experience any problems during the installation of flashplayer then follow the steps mentioned in the link to the following article:

  http://kb2.Adobe.com/CPS/191/tn_19166.html

  In addition, I suggest you to uninstall Java completely from programs and features, and then reinstall the latest version of Java from this link.

  http://www.Java.com/en/

  Then check if you are able to play the games in Internet Explorer.

  Reference:

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  More information: Try working through the steps provided here to resolve the error you receive everything by trying to play Pogo games:
  Java - how to solve some problems running Pogo games?

• HP Envy 120 printer prints OK but the error message after each document

  After upgrading the firmware in my printer, I now get a window pop up with the title, "Unable to communicate with printer" at the end of each document.  The error message should be cleared before the next document in the queue will print.  Each document prints correctly despite the error message.

  Another thing that may cause this condition besides the update of the firmware is this: I have set up my printer for wireless printing, which worked OK.  However, I am currently using the printer with a wired USB connection.  Of course, the version non-reseau of the printer is selected as my printer 'default' regarding this error report.  The update of the firmware was held at the same time that change this "setup".

  Hey @rrbNevada,

  Welcome to the Forums of HP Support!
  
  I understand that your printer HP Envy 120 seems to have an error "Unable to communicate with the printer" after each print job is printed and this problem seems to have started after an update of the firmware running and change your connection type. Maybe it's a coincidence.

  For me to help you I need to know what operating system you print since?

  What is my OS?

  For now, I would like to run the print tool HP and doctor Scan. It is a practical tool that will 'fix print' questions automatically for you. It will scan the computer for any conflict of driver printer HP, connection problems and other issues that can cause problems with your printer. It will also try to fix these problems for you.

  HP Print and Scan Doctor

  If printing HP and doctor Scan fails to solve your problem, I recommend a complete uninstall and reinstall of your software and drivers for a clean slate to work with.

  Uninstalling the printer software

  After you have uninstalled the drivers and the printer software I need you to reinstall. To reinstall, I add two documents of reference below:

  Installation for USB under Mac OS X

  Installation of USB on Windows

  Because you use the printer for network and USB connections on your computer I suggest you first run installation from USB.

  Once the printer is installed for USB, then you can add in the wireless version.

  Adding a printer wireless on Windows:

  1. open the Printer Assistant software on your desktop. It should resemble a black printer icon and has your options of Scan inside.

  2. click on the 'utility' on the top tab

  3. click on 'software and configuration of the printer.

  4 enforce "connect a new device" for the network connection.

  This will add two copies of your printer and both will be implemented properly for scanning and printing.

  Adding a printer wireless on Mac:

  1. Click The HP utility icon in the Dock.

• Windows system error: there is an IP address conflict with another system with the network. How do I remove this error message?

  I just installed a new internet provider and all of my connections are working fine, but I constantly get this "Windows system error: there is an IP address conflict with another system with the network." I have my electrician of the internet modem connected to my office. I have also two wireless devices connected to the appearance of the Modem wireless. I constantly get this error message mentioned above, and I want to get rid of it.

  This means that all that he says.  Your Windows system has an address that already exists on your local network.  Turn your system off and use a working system to locate this address and to which unit he belongs.  In most LANs, the router's DHCP server.  You may be able to ask the router which addresses are used and see what device uses this address, but I suspect not.

  Duplicate addresses can occur when two systems received the same address manually, or when we got an address in the DHCP of the router range. It is unclear when this happened because he is not in control of the address and puts the address duplicate to a second system.  You need to track down, ensuring that all addresses manually asigned are out of the DHCP range, that you book the address of the router, if you want the device to use this address, or configure all devices to request the address of the router using DHCP.

• Unable to open the system restore after a virus attack. Get an error, the status of the channel is disabled, Code 230

  OP: The State of the channel is not valid Code 230

  some poured a group of viruses on my VISTA computer. I've tired to restore to an earlier period, but can not get the restore to run. I tried to locate rstrui.exe and right-clicking it goes then properties. Restore to an earlier period does not come to the top. If I click left on rstrui.exe I get the same message, the line is not valid.

  I looked in the forum and have not found an answer to this problem. I have the 7 update. install this would fix the problem?

  Hello snail,

  Do a system restore is not a better way to get rid of viruses on your computer. You should start with the execution of an on-line analysis of Windows Onecare on your computer. Follow the link below to run the scan Windows Onecare online on your computer:

  http://OneCare.live.com/site/en-my/default.htm?mkt=en-my

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Virus attack/infected system detected Norton AntiVirus.

  I got a message from my Norton Antivirus program as follows:
  "System infected: TidServ activity 2."  Computer attack: Io4undreyk.com (93.114.40.221, 443). The attack was a result of the \DEVICE\HARDDISKVOLUME1\WINDOWS\SYSTEM32\SVCHOST. EXE. "Source address: 93.114.40.221.

  Is there a way I can get rid of this virus? This virus redirects my research to commercial sites. Norton sometimes cannot block operations, can sometimes.

  Thank you for your help.

  Hi SyedAmin,
   
  You may need to contact Norton support to obtain help on this issue. Visit the following link to do the same thing:
   
  http://us.Norton.com/community/index.jsp

• I have no internet audio after a virus attack.

  I got the virus from "windows XP fix. I have removered with the help of an online forum. I did a restore of the system in three days. The PC works again but I have no audio on the internet. Internal sources work fine. I checked the box "Play sounds on web pages" and restored the options explored without the factory. None of this has worked. Anyone have this problem before?

  Thank you

  Andre'

  I am proud to announce that I fixed it. I want to thank both of you for your help, but that's what fixed it. The problem is that the PC is still infected by a redirection adware virus. It's this blocking on your pc and the Internet is one of them. Go to this site and down load the soft ware and run it.

  http://www.bleepingcomputer.com/virus-removal/remove-TDSS-tdl3-Alureon-rootkit-using-TDSSKiller

  There are step by step instructions. He was safe and has worked for now. I have new volume, and I don't have my glasses redirection adware. This one for the honest person against these crooks who off these viruses and then charge you money to get rid of them.

  Andre'