After a while, the computer just freezes, without any explanation?
nihcooc
Hello
Your question does contain all the required information necessary for us to help you. Please provide us with the following information.
1. do you get an error message?
2. what changes have been made on the computer until you have encountered the problem?
I suggest you follow the methods below to solve the problem:
Method 1:
a. start the computer Safe Mode and check if the problem still persists. Please refer to the city link below to start the computer in safe mode:
http://support.Microsoft.com/kb/315222
b. If the problem does not persist in safe mode, continue with the boot to find the problem causing the element. Please follow the steps mentioned below to perform the clean boot:
http://support.Microsoft.com/kb/310353
Method 2:
You may also like to perform an analysis of the computer online. See the below link for an analysis of the computer online:
http://OneCare.live.com/site/en-us/default.htm
Kind regards
GauravPrakash - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think.
Tags: Windows
Similar Questions
-
Computer just freeze on Windows 7 while playing world of Warcraft.
Ive had this problem for months. I don't know what to do. I double boot Windows 7 Ultimate 64 bit and Windows Vista Home Premium 32 bit. When I play World of Warcraft on Windows 7, after a while the computer hangs and I have to restart. He did it on Vista, but it's been very long since it has. In this case I usually reboot Vista and do not have to worry about this. Ive done virus, defender of the scans, disk defragments, etc..
My specs are
Processor: Intel (r) Core (TM) 2 CPU Quad Q6600 @ 2.40 GHz (4 CPUs), ~2.4GHzMemory: 4000MB RAM DDR2 1066Hard drive: 500 GBVideo card: NVIDIA GeForce 8800 GTXMonitor: Samsung SyncMaster T200HD LCD monitor /TV wide screenSound card: Speakers (Realtek High Definition) AudioSpeakers/headphones: Altec Lansing speekersKeyboard: Mouse: Surface of the mouse: Office wooden flat anti-glareOperating system: Motherboard: ASUS P5KC 1333 MHZ Socket 775 C2DComputer case: Antec 900It seems that the drivers are not ready for Windows 7. Although you may have updated your graphic drivers, I would see if your BIOS motherboard, your device sound and other peripheral devices (mouse, keyboard, etc.) have updated drivers. A lot is written with the current operating system in mind. Windows 7 is very recent (not yet public) and that you still have hardware that is not yet ready to support it properly.
It should be better that the public release comes out and more people have similar problems, where the hardware manufacturers are forced to produce better drivers.
-
I have a 2015 macbook pro 15 inches. While the computer boots the logo apple with the grey wire sliding bar flashes once then end of load as usual. I was wondering if this is normal or not much. Everything seems to be fine. To explain in more depth. As the computer boots the apple logo flashes off the coast and then turn it back on and finishes loading. It doesn't seem to be any questions I want to just make sure because I just bought this mac.
It is booting normal up -.
-
* Original title: Vista 32-bit SP1
I have vista and tried to install sp1 again it has been a success, but is always appear as a download available even after a reboot. Help! Just try to update to IE9.
Hello
Thanks for posting your query in the Microsoft Community Forums.
According to the description of the problem, it seems that Windows Vista Service Pack 1 was successful; However she was showing as unavailable after you restart the computer.
I will certainly help you with this issue.
This problem may occur if one of the following conditions is true:
a. a program on your computer interfered with the installation of the service pack.
b. There is an inconsistency in the store of Windows services. The store Windows maintenance is a required component to install service packs.
Here are a few articles that you can consult in order to solve the problem.
How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
How to obtain the latest Windows Vista service pack
Microsoft Windows Vista Service Pack 1 (SP1) frequently asked questions
Solve the problems when you can't install Internet Explorer 9
If the problem persists, or you have questions about Windows, do not hesitate to let us know. We will be happy to help you.
-
our administrator user on the computer just connect.
our administrator user on the computer just connect.
whenever I click on it (it does not require a password) it tells me I can't log on because the user didn't load, I know not what to do or how to fix it...
Please help me :(Hello
1st thing to try is the system in safe mode restore to before the problem
http://www.windowsvistauserguide.com/system_restore.htm
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
If that does not solve it read more
read the tutorial below
When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:
The user profile Service has not logon. User profile cannot be loaded.http://support.Microsoft.com/kb/947215#letmefixit
Your user profile was not loaded correctly! You have been logged on with a temporary profile.
http://support.Microsoft.com/kb/947242
If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
-
original title: Defender
Does anyone know why when I run the defender and he finds a Trojan horse, and I try to remove it it starts to do then after some time the computer stops and when I restart it Defender always tells me there is a Trojan horse and the same thing happens when I try to remove it?
Hello
Download update and scan with the free version of malwarebytes anti-malware
http://www.Malwarebytes.org/MBAM.php
You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes
http://www.bleepingcomputer.com/download/anti-virus/rkill
If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode with networking with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
-
Using Microsoft® Windows Vista Home Basic Version 6.0.6001 Service Pack 1 Build 6001, I have my computer set up to install updates automatic update and scan with my AVG antivirus 8.5 from one day to the next, while the computer is in sleep. In the morning, when I wake up the computer it alerts me that there are updates available, and I have to click the balloon to install the updates. Meanwhile my anti virus is update solange wake up also. Both are supposed to occur automatically during the night. Shouldn't these scheduled etc. updates works even if the computer is asleep?
Hi daglo1963,
Thanks for posting on the Forum of responses of Vista.
When Vista is in "standby", like updating the activity is suspended.
I hope this helps.
Chris
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
After turning on the computer, the screen stays black
original title: fix a black screen
After turning on the computer, the screen stays black
It could be that your video settings have been set to a resolution that your monitor does not support.
You can start mode (repeatedly tap the F8 key during startup key) safe? Safe mode requires a video resolution supported by all monitors. If it works, try to change your video resolution settings
(Control Panel-> display-> (tab) settings.HTH,
JW -
After you start the computer, I get the error msg: "ProfileCnt.Exe has encountered a problem should be closed" can someone help me?
Hello
Some research suggests that ProfileCnt.exe belongs to a wireless card or
Ethernet card.
Work using the boot minimum troubleshooting to identify the troublesome program,
then uninstall/reinstall this program.
331769-how to perform a procedure to clean boot (XP & Vista)
http://support.Microsoft.com/kb/331796Alternatively, looking for C:\Program Files for the file ProfileCnt.exe can tell you
What program is involved.
Don
-
NEED HELP WITH SERVICE PACK 3. After downloading and the computer goes into rebooting mode I get the screen to restart with three options, network security safe mode and the other thing. , but it of although he gets, he keeps countdown to restart and reboots and restarts, over and over again, never reboots, same screen. my computer won't let me out this screen even after I turned off the computer and turn it back on, I get the same screen. the only way I can get out of this is to erase my computer everything and bring it back to factory, right out of the box, this big headaches. Thanks for anyone who can help me. PS. Keep the answers in simple terms please.
Hi BSRC$, in stock
- You have security software installed on the computer?
- You receive an error message when you restart the computer?
Reinstalling Windows XP to the factory setting would not be the first option.
It is possible that some third-party programs or the services installed on the computer interfere with the installation of service pack 3.
I suggest that you try to uninstall service pack 3 from the computer by using the recovery console and subsequently ask the article below for what to do before installing the service pack 3on the computer.
How to remove Windows XP Service Pack 3 from your computer
http://support.Microsoft.com/kb/950249
Steps to take before you install Windows XP Service Pack 3
-
put all my pictures from recovery disks 1-2-3 after re buting the computer tried to re install won't let me download them help
Hello
Read the results of a problem similar to yours at this link Microsoft Answers:
See you soon.
-
How can I find the results of a 'chkdsk' after you restart the computer?
Original title: checkdisk
How can I find the results of a 'chkdsk' after you restart the computer. I am running "Vista Home Premium"
Hello
CHKDSK (short for Checkdisk)-<-- see="" the="" vista="" log="">-->
http://en.Wikipedia.org/wiki/chkdskJournal of checkdisk is EventViewer which is easy to read with the 2nd utility here.
Look in the Event Viewer to see the newspaper.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htmControl Panel - Classic view - administrative tools - event - left panel - Windows logs Viewer - under the
above - click on request - in the middle column, scroll down the list that indicates the Source - click Wininit.
good Panel - Wininit event - click on the event properties - new window will open with the journal you want.
Scroll as needed. Event ID is 1001.---------------------------------------------------------------------------------
If you clear the log before you checkdisk annex, it is easier to find but by time and Date
should be easy enough.MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.htmlI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
It's not fair, I paid the subscription for the CC package and it will not fully download learn to almost 40% then download fails without any explanation. I'm new to a Mac platform, so any help would be appreciated, thanks.
Hello
Please remove Creative Cloud app and Adobe Application manager using the-
Install the cloud creative app - https://helpx.adobe.com/creative-cloud/help/install-apps.html
-
in the course, I have install creative cloud, download until half of the window just disappears, no any error report, and nothing happens... I can't download creative cloud.
Please follow the steps below and check
1)
Click on the Finder and search options listed next to icon located Apple in the upper left of the screen and click on the "Go" menu button and select 'utilities '.
(Applications > Utiliites)
Look for a folder Adobe Creative Cloud and Adobe Application Manager under utility window and trash both folders.
(2) trash Adobe Creative cloud from Applications Eh well.
3)
Click on the link below and download & run the cleaning of Adobe tool:
Select the option "Adobe Application Manager for Mac OS X 10.6" and then click on "Clean up selected."
4) click on the link below and download file Creative Cloud install and use the same to install the creative Cloud Desktop application.
-
Loss of internet connection after sleep and the computer will not be closed.
I have a laptop GateWay w / Vista 32 bit OS. Recently connected to the new internet connection and can connect without a problem. However, after waking from sleep, the connection is lost, the icon indicates still active connection, can no longer open connection or the computer will restart. It just hangs and I have to make a hard stop and start again. If I remive the connection Wireless via safe mode things is back to normal. However, the cycle repeats when the connection is restored and the computer enters mode "Eve".
Hi bobert1953,
This problem can occur when the power management profile turns off your network adapter.
Method 1: To disable power management feature ent of network cards
a. click on start
b. right click on computer
c. click on manage the
d. click on Device Manager in the left pane of the window
e. expand your network card.
f. now you will see your network adapter or adapters if you have more than one. Right-click on the network component, and then click Properties.
g. go to the power management tab.
h. ensure that all check boxes are unchecked (check boxallow the computer to turn off this device to save power is off).
i. When you have disabled the boxes, click ok and restart your system. Put the computer in mode 'sleep' and check if you still have any questions.
Method 2: You're also talking about the steps mentioned in the article below, which deals with a similar question
After you wake up, a Windows Vista-based computer or a Windows 7 sleep mode or Hibernate computer, the network icon and the speaker in the notification area icon do not show the correct state
http://support.Microsoft.com/kb/937477
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
---------------------------------------------------------------------------------------------------------
Visit our Microsoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
Windows Live Messenger does not automatically sign to define the option to do
Original title: Windows XP cannot save my settings My Windows XP cannot save my settings. I already have live messenger automatically, but Live Messenger connection still need me to provide the user name and password before you connect to each launch
-
Windows Live Mail crashes when you try to send e-mail messages.
When I open Windows Live Mail my emails and try to send to comcast.net, the Live Mail freezes up. If I try to create a new message or reply to an email that I received, a new message then goes white opaque and Windows Live Mail stops. It just gives
-
Problem with Windows Media Player?
I tore pieces of music on the memory sticks USB, but suddenly the tracks will not be playing through WMP on my PC. Is the problem with WMP or my USB? How can I solve the problem? Tracks still on ok read WMP.
-
Graphic performance rating: How can I increase this score?
original title: graphical performance evaluation? When I try to improve my score on performance monitor, all scores are above 3.0 accept graphics. How can I increase this score?
-
Unknown message to decrypt to avoid losing files
Original title: decrpt I got a message saying had a decrption so that I would not lose important files is it safe? Moved from Internet Explorer to the Performance