After change of custom.pll - what to jump?

Similar Questions

• After changing the motherboard in my PC the device software windows 7 cann't be activated. I tried many times to speak with the service the customer but failed.

  After changing the motherboard in my PC the device software windows 7 cann't be activated. I tried many times to speak with customer service through automated phone system, but failed. Now what should I do.

  The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

  What is OEM software? :

  http://support.Microsoft.com/GP/oemsupport_1/en-GB

  Licensing FAQ:

  http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_faq.aspx

  --------------------

  Windows 7 - version comparisons:

  http://Windows.Microsoft.com/en-us/Windows7/products/compare-editions

  MS Windows 7 store price:

  http://store.Microsoft.com/Microsoft/Windows-Windows-7/category/102

  --------------------------

• Missing CUSTOM.pll after you apply the hotfix 6167056

  Hi all
  
  I made a request patch 6167056 in order to exploit the post install properly, not to copy the CUSTOM.pll to $AU_TOP/resource and re - generate the CUSTOM.plx
  
  I can't find the CUSTOM.pll of 6167056/backup/resources
  
  bash-3. $00 pwd
  / XXXX/XXXX/6167056/backup/resources
  bash-3. $00 ls-l
  Total 184
  -rw - r - r - 1 oradev 94208 15 Oct 19:33 JAINTAX.pll dba
  bash-3. $ 00
  
  CUSTOM.pll is missing. Might suggest why he did not come?
  
  Thank you
  SK

  Hello

  I understand that the two files have the same version (as seen in the log file of the fix), thus generating files will be OK. To check the version of files, issue the "strings - a CUSTOM.pll | grep header"for both files.

  Kind regards
  Hussein

• Do all my purchased apps and transactions, transfer again ID after changing Apple ID?

  Hello

  I use my custom as my apple ID email address, but this year I decided to change my domain and ID.

  I've seen this before: https://support.apple.com/en-us/ht202667

  My question is:

  Do all my purchased apps and transactions, transfer again ID after changing Apple ID?

  Concerning

  Change the primary e-mail address on an account should not lose any content of the accounts - after changing your id: what to do when you have changed your Apple ID email address or password - Apple support (or disconnection across before changing preference and return with the updated later version)

  But if you are referring specifically to be able to redownload apps etc, they (and albums of music, etc.) could be removed from the Bank by the holder of the rights at any time, so you should not rely on the possibility of any element of the store to download again.

• After changing the port (1521 to 1525 in listener.ora and tnsnames.ora) OEM: the database is down

  Hello

  I'm installing Oracle Database 11 g 2 (11.2.0.4) on Oracle Linux 7.1.

  In short, what I'm trying to do now is changing the default port of 1521 to 1525.

  So I stopped the listener (lsnrctl stop) and then changed my listener.ora and tnsnames.ora:

  Listener.ora

  listener.ora # Network Configuration file: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora

  # Generated by Oracle configuration tools.

  LISTENER =

  (DESCRIPTION_LIST =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))

  )

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP (PORT = 1525))(HOST = localhost))

  )

  )

  ADR_BASE_LISTENER = / u01/app/oracle

  tnsnames.ora

  tnsnames.ora # Network Configuration file: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/tnsnames.ora

  # Generated by Oracle configuration tools.

  BI =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = TCP (PORT = 1525))(HOST = localhost))

  )

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = bi)

  )

  )

  And then changed the local_listener:

  SQL > ALTER SYSTEM SET LOCAL_LISTENER = "(ADDRESS = (PROTOCOL = TCP)(HOST=localhost) (PORT = 1525))";

  SQL > ALTER the REGISTRY SYSTEM;

  Finally, I started the listener (lsnrctl start) again.

  Then I tried to connect using Oracle SQL Developer to the customer. The port of 1525 works perfectly well.

  The problem is, when I open the OEM (Oracle Enterprise Manager), it says: "the database is down. Please specify the credentials of the host to access the restart and database diagnostic tools," which is like this: http://imgur.com/oKLPW65

  So I logged on the account of the host, and it shows that the database instance, listener and the agent is all down like this: http://imgur.com/Bzr84bz

  It seems that the port used by the OEM is always 1521.

  What should I do? Can someone help me solve the problem?

  Thanks in advance.

  UPDATE:

  After changing the emoms.properties & the targets.xml (thanks to Elisabeth), you will need to reconfigure dbconsole using emca.

  So what I'm doing is decreasing the config:

  $ emca - deconfig dbcontrol db-rest drop

  and then create again:

  $ emca - create config dbcontrol db-rest

  Voila.

  Best regards

  Jerry Antonius

  Hello

  Try to change the port numbers in the following files

  Don't port no 1521 to 1525

  $ORACLE_HOME /_SID/sysman/config/emoms.properties

  oracle.sysman.eml.mntr.emdRepPort = 1525 (before 1521)

  $ORACLE_HOME /_SID/sysman/emd/targets.xml

  (Before 1521)

  (Before 1521)

• Purchased in UK/Oz apps does not refresh after changing store in the USA.

  I was in the United Kingdom and Oz and had a UK or OZ account and bought apps - they updated very well (although never automatically as promised).

  Now, I moved to the United States and updated my account to USA store.

  The apps I bought previously refreshes (much).

  If I click on an app in the store I, iTunes think I haven't it and install it.

  Does anyone have the same problem and the solution? I fed it to Apple.

  On a latest operating system Mac and iTunes.

  Before changing countries make sure that you have downloaded and saved all your previous country store purchases.  You will not be able to re - download it again once you change of country and it won't be easy to change the country to another once you lose your mode of payment for the old country (such as a waiting period).  As long as you have on your computer you'll be fine.  You also will be able to update all the apps that you have purchased.

  Change your iTunes Store country or region - https://support.apple.com/HT201389 - "After changing the country of your account, you won't see what you bought the previous country store in the purchase section."

• Mail does not ask for new password after change

  I had to change the password for my email account based on Yahoo (sbcglobal dot) net because the hack/spam. It's the second time in 6 months, and I'm having the same problem that took place the last time. After changing the password through webmail interface for the account and which confirms that change has gone through by a disconnection and return again on webmail with the new password, I estimated that the Mail on my MacBook Air (OSX 10.11.4) app so the Mail on my 5 c iPhone iOS app are still happier never to communicate with Yahoo Server , sending and receiving mail, despite never forces me to put the new password.

  This is obviously less annoying than the problem where Mail asks password constantly, it should not all too obviously work in this way. If one of these devices were lost or stolen, I know now that I could not get this email account by changing the password. Apple support tell me that deleting and then reinstalling the account in Mail should solve this problem, but *? I won't be able to do if a device is never lost/stolen. Something is clearly abnormal in the way Mail communicates with this Yahoo Server and Apple needs to fix this on their end!

  OK, I'm a monumental fool, apparently, but so are at least half a dozen Apple Support "geniuses."

  I have iCloud active keychain. Therefore, this behavior is expected. Keychain passes the new password information to both the MacBook and the iPhone instantly after that I changed it on the MacBook via the webmail interface. No Mail app should ask for the password, because they already have through keychain.

  So I feel very stupid, but then again I am not a geek, and I'm not paid to know these things. What is their excuse? Why zero agents Support of Apple knew it was happening, or think to ask about it? Why was their first step to remove, then reconnect the account, which took me less than an hour from the last time I did, apparently unnecessarily? Honestly, one wonders if anyone knows how to do their job more.

  / end of rant

• HARD does not work after changing the disk partitions recovery media creator

  Hello world

  After installing windoows 8.1 April major upgrade (win 8.1 presents as OEM), and have shrunk C partition to create a data partition "D", "Troubleshooting" option under advanced start menu is no longer available.

  Toshiba Recovery Media Creator does not work, too (it can not find any hard disk recovery partion).
  I got in the OEM recovery partition.
  I am also able to create a recovery using the Windows tool unit.
  You have no idea about it?

  Thank you very much!

  Hello

  Sorry to hear about all this. Unfortunately, you now have a big problem. I don't understand why you didn't create support of recovery before you started to change the factory settings, including to change the structure of the partitions of HARD drive.

  Mobile offered with factory settings a structure specific partitions and recovery recorded image is saved on the partition of drive specific and marked with invisible markers. These markers are visible for preinstalled Toshiba recovery media creator tool and when you start the tool can find points of reference and has full access to specific files.

  Unfortunately, after changing the original scores structure Toshiba tool cannot find these markers more and is not able to copy files from recovery media recovery. What you need now is the original recovery disk. Using this disk, you can install original recovery image and after doing this, you will have new factory settings.

  I know it sounds stupid now but you must order the original recovery disk and it can be done on https://backupmedia.toshiba.eu/landing.aspx

  If you have any other questions you are welcome.

• Computer sees no floppy and CD Rom/DVD player after change of motherboard of PC w / Windows XP SP3

  After changing the motherboard on my PC, a Dell Optiplex gx270s Windows XP SP3, the computer (which also works fine) does not see the CD/DVD or floppy drives CD, DVD or floppy is inserted. (He sees not thumb drives). When I look under the hardware in the system, the floppy drive and the Cd-Rom are marked as +. All appropriate updates had been installed. These discs worked fine before the motherboard was changed. (It was done because the capacitors were bulging.)

  What could be the problem and how to fix it?

  Please explain simply, that I'm not a computer expert.

  Thank you in advance.

  Hi 4Sunnydays,

  Welcome to the Microsoft community. According to the description of the problem, CD/DVD and floppy drive is missing.

  ·         You get the error message?

  I suggest you to follow the steps in the article and check.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://support.Microsoft.com/kb/322756

  I hope this helps. Let us know if you need more assistance.

  Thank you.

• Sansui HDTV with PC quick entry works after change of pixels.

  Description of the problem: I have a HD of Sasui TV with an entry for PC I have deen usind more than a year.

  After changing the pixel size of the screen, we loss of image. The monitor works fine with my laptop. The monitor works in cmos and throughout the boot up to the windows XP screen screen and then turns off with this desktop computer. Dell monitor Im borrowing works fine. I may be wrong but I think that the driver may be bad.

  What I can do.

  Thank you

  Michael Bauer

  Operating system: Windows XP

  refresh rate is 75 Hz. Changed to 60 Hz. and the seams to have to fix the problem. Will freeze?

• RA media server became administrator after changing my standard user account

  What is the password?

  RA media server became administrator after changing my standard user account. Now, I can not retrieve my admin rights because he kept asking admin password that I don't know. System Restore didn't help coz' it was not far enough for the moment I changed my standard user account.

  I called Dell, but I don't want to pay the support service which costs more than a hundred dollars.

  I need some help on how I could get my admin rights back again.

  I have no copy of the installers for some of my important software which is why I'm afraid to reinstall the program, or even do a system recovery.

  I use a 32-bit vista. The only solution I can think of is to get "system user", but I don't know how.

  Please I need help.

  http://en.community.Dell.com/forums/p/19252460/19419355.aspx

  Read information about it to Dell link above.

  It's the Dell software, not Vista.

  If the info on the link above do not resolve the problem, contact Dell:

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_us?c=us&l=en&s=Gen&redirect=1

  See you soon. Mick Murphy - Microsoft partner

• error printhead after changing the printhead in L7680

  I have an OfficeJet Pro L7680 that is a few years old.  Recently, I have noticed a decline in the print quality for mainly black, but also a little yellow, and after changing the black cartridge with no changes, I decided to change the Black/Yellow Printhead.  So, I thought that if I'm trying to change a print head, I should change the other (cyan/magenta).  I bought new Office Depot print heads.  After replacing the print heads that I was able to print a page or two, and then all of a sudden the printer started saying there is a problem with the cyan/magenta printhead.  I tried to remove and reinstall, the suppression and power reset and then put it back up, etc, but nothing moves it.  I have not yet called HP, but I hope that when I do they will help because the print heads are under warranty until 2014, even if the printer is out of warranty.  In the meantime, I thought I would ask here is - it possible I only have a print head of DOA?  Or would it be the printer?  Unfortunately I threw the old printheads immediately (stupid me) so I can't try that goes back to the old magent/cyan print head and see what happens.

  Hello jmmarton.

  Your chip printheads were damaged by inserting wrong while the transport is always on the right side. This document provides instructions on how to replace the printhead to the unit.

  Use the link below to find how to contact HP phone support in your country.

  http://WWW8.HP.com/us/en/HP-information/summary/WW-contact-us.html

  See you soon!

• HP2840 which has just started to squeek terribly after changing the drum.

  Can anyone help to maintain the HP2840 all in one color laserjet

  The squeeking started after changing the second image drum

  thketer,

  Self-satisfied, you got what it takes .

  Good luck!

• Windows7 - error msgs & MGP works does not properly after changing drive letter

  I am running Windows 7 Home Premium 64-bit.

  When first, I partitioned my HARD drive, the 2nd logical drive was labeled J:, who was the next available letter after all the optical drives and integrated flash memory readers.

  I prefer to label it D: (to follow immediately from the boot partition which is C :).  I used the functionality of disk management to change the drive letter of the J: to D: (and of course move the rest optical drives and integrated flash memory ready in 1 letter).

  When I run some programs, I get this error message:

  "There is no disk in the drive. Insert a disc into drive \Device\Harddisk4\DR4.

  Options click below this message are "Cancel", "Try again" or "continue".

  Some programs, such as Google Chrome, Microsoft Works word processor and spreadsheet, clicking on one of the 3 options will allow the program to operate normally.

  For other programs, such as Windows Live Movie Maker, clicking options will cause a "Drive not ready" message and lead to more problems.  For example, I can not load my existing projects, because I can't get to the screen that allows me to navigate through drives and folders to choose my file.

  I uninstalled and reinstalled the Movie Maker, but the problem is still there.

  Seems to me that it is not the individual programs that are at the origin of the problem, but something in Windows 7 itself.

  How can I get rid of the error messages and get the programs to run normally?  Do I have to edit the registry of Windows 7?  If so, what will exactly be changed?

  Thanks in advance.

  Think I found the answer.  Looks like it is a problem of registry after all.  That's what I did:

  (1) go to the start menu.

  (2) execute Regedit by typing "regedit" in the search box and press .

  (3) the search for "J:" in the whole registry.

  (4) when a directory path is starting by 'J' and the pursuit of my familiar subfolder names, I should now start with "D:" instead, I right click on it, choose "Edit" and change the "J" to "D".  (Note: I only change to directory paths that looked familiar to me and I'm sure that should now start with "D:".)  I change all instances of "J:" that were found).

  (5) once this is over, choose 'File', then 'leave '.

  A ran programs that have already given the error message.  No error message comes this time.  Restarted the PC and programs run.  Once again, no error message.  I hope that things stay effortless.

• HPDeskjet 3070 DOES NOT PRINT AFTER CHANGING CARTRIDGE.

  After changing all four cartridges in printer Deskjet 3070, is no longer prints black, produced a blank sheet on the copy function and will only print jpg files, this happens with the Dell laptop on USB or network, also Dell laptop computer on the network (not tried USB). The printer worked perfectly before the change, on the site of consumables HP HP cartridgesare. This is the third change of cartridge (HP, always) since the purchase of the printer in November 2011, they appear in the last four months.

  Hello JohnFo

  So the color is printing, but not black? What happens if you make a color copy by using a black text word document? I suggest as a result of the article below. It contains troubleshooting steps for the white pages. If the problem persists check the next few sentences.
  Printer prints white sheets of paper

  The problem could be a bad cartridge. Before working on the printer as the article suggests you should contact HP. All authentic HP ink cartridges come with their own warranty, so if you call HP on the cartridge, you should be able to replace to help determine if the cartridge is the problem.