After changing out my usual printer print
I have a HP Photosmart B109n wireless printer. After that I moved to BT Broadband it no longer works
This is because the printer does not change.
Use the Control Panel on the printer to reset router SSID and password. You may need to consult the manual to complete the operation.
Tags: Windows
Similar Questions
-
After changing the router cannot printer to the wireless system
Just changed router and found the printer was no longer visible said a relocation complete, got a page that asked I connected a printer/computer USB cable to continue. I do not have an advance long enough and we didn't need the first time I installed the printer so what goes wrong > I have 64 bit Windows 7 thought I maybe need a driver different, but nothing works, because I can not all facilities is
Found the router WPS button finally (it was part of the decorative work)
so he was able to connect in this way
Thanks for your time and your concern
-
Help - hp deskjet 5650 - printer cannot print black after changing cartridge
original title: help the printer - hp deskjet 5650
OK, so my black printers ink ran out, so I changed the cartridge. The cartridge said it is appropriate for my printer. However, now he usually print anything in black... Help!
Replaced by Inkrite H-56 who say that it is suitable for Deskjet 5650. I ran the test page, still no black ink. Any tips?
Hello
If you have a problem after the replacement of a material component, the manufacturer with your HP printer ink cartridge
link below has Manual HP how etc. for your model
or contact HP
http://h10025.www1.HP.com/ewfrf/wc/contacthp?LC=en&DLC=en&cc=us&lang=en&product=304445
or hp support forums
-
Office Jet 6500 will not print after changing the ink cartridges
Office Jet 6500 will not print after changing the ink cartridges
Hello
This doesn't seem to be a problem with the printer itself and not Windows. I also suggest to contact the manufacturer. In this case, HP.
Please see here: http://www8.hp.com/us/en/support-drivers.html
-
Color LaserJet CP1025nw: printer does not print after changing cartridges
I just inserted cartridges M, Y and C in my printer. They are official cartridges 126 a. I followed all the instructions (shook gently, removed the orange protective cover and pulled the Ribbon out). I inserted one at a time, waiting after each insertion for the printer to run through its cycle. Then I tried to print a color print job with no luck. Then I tried to print a simple typed page - once again, no luck!
Is it possible to print a test page? I don't get any messages on my computer. When I look at the print queue, it says "error printing". Help, please! Thank you.
Note later: my mistake! I turn on the blue light from the top; Once lit, the printer has been good to go. Can tell you that I'm not very technologically savvy?
So it works very well now?
-
HP Photosmart 3210: I can't close the top of my hp3210 printer after changing cartridges
After changing a few cartridges of my hp3210 photosmart printer I can't close the top, there is something blocking
This youtube video can be useful: replace the ink cartridge
-
There was a similar position two years ago. After changing the cartiridge (564XL) black printing, the printer will not copy documents. He behaves as if I placed a blank sheet of paper on the glass. I can scan the document and print the .jpeg, but not the document. The print quality of everything else is mediocre - very light on blacks, even though the colors are fine. I ran through all the diagnostic tests and he told me that the printer is fine, although the black box on the diagnostic page is empty. The difference between my printer and the one in the previous post, it's mine is 18 months and longer warranty. It has been little used. In the previous post, none of the solutions have been proposed, but apparently HP has replaced the printer. Any suggestions, or is this device intended for scrap?
Try youtube videos here.
https://www.YouTube.com/results?search_query=Photosmart+6520+print+head
Looking to learn more. If no joy, your printer is toast.
-
HP laserjet p1006: does not print after changing the toner
I just changed the toner. The green light is on, but when something I send to the printer to print, the orange error light. Before inserting the toner, I pulled the Strip in transparent plastic attached to an orange tongue and the black cloth. I tried to reinsert the toner and turn on/off the printer again. Help please if you can. Thank you!
Hi @cindycb,
Welcome to the Forums of HP Support! I read your post and to see that when you try to print after changing the toner, the Attention light. I would like to help you today. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.
Make sure all the orange, packaging material is to remove the toner.
Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.
Try and print a self-test on the printer hardware to see if it is a hardware or software problem.
Open and close the cover five times quickly. It should print a page with black lines on it.
You can find the flashing light distribution in this document and the right solutions for the reason that you are experiencing, lights blinking on HP LaserJet P1005, P1006, P1007, P1008 and P1009 Printer Series.
You use Genuine HP Toner?
Please let me know the result and if there is anything else I can help you. Thank you.
-
HPDeskjet 3070 DOES NOT PRINT AFTER CHANGING CARTRIDGE.
After changing all four cartridges in printer Deskjet 3070, is no longer prints black, produced a blank sheet on the copy function and will only print jpg files, this happens with the Dell laptop on USB or network, also Dell laptop computer on the network (not tried USB). The printer worked perfectly before the change, on the site of consumables HP HP cartridgesare. This is the third change of cartridge (HP, always) since the purchase of the printer in November 2011, they appear in the last four months.
Hello JohnFo
So the color is printing, but not black? What happens if you make a color copy by using a black text word document? I suggest as a result of the article below. It contains troubleshooting steps for the white pages. If the problem persists check the next few sentences.
Printer prints white sheets of paperThe problem could be a bad cartridge. Before working on the printer as the article suggests you should contact HP. All authentic HP ink cartridges come with their own warranty, so if you call HP on the cartridge, you should be able to replace to help determine if the cartridge is the problem.
-
As above. I checked the USB port and it is connected.
Original title: printer problem. After changing the cartridge, I get a message that the USB cable is not connected?
Hello
1. you receive an error message/code when you try to print?
2. What is the serial number and model of the printer?
Follow the steps.
Method 1
Run the hardware and devices Troubleshooter
This utility checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.
http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-TroubleshooterAlso run convenience store Print that would help us diagnose the problem better
http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-TroubleshooterMethod 2
(a) check the physical connection of the printer and make sure that the USB cable is properly plugged.
(b) connect the printer to a different USB port and check if it helps.
(c) check the on another computer.
Method 3
Run the fix - it tool from the link.
Diagnose and automatically fix problems printing and printer http://support.Microsoft.com/mats/printing_problems/
Method 4
If the previous step fails, follow the steps described in the following link:
Printer in Windows problems
http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
Let us know if it helps. -
How to change the page numbers after you add and save the page numbers in the pdf document - need to change the existing page printed on the upper right in the header numbers.
These page numbers were initially created using Acrobat PDF header and footer.
I have a 750 page pdf document that I've created.
I have to sometimes the pages up and down after that I added the page numbers in the document by using the Header_Footer tool on the right column of tools.
But after you save the document, if I get a few pages around, I can't go back and change the page numbers.
I thought that the page numbers, as indicated in the header and footer must have changed automatically, but I guess that once its print, that it cannot be edited - is that, as what is?
So I guess we should always first get a copy without numbers of pages before confirming the documents and the creation of an index.
A way to remove these page numbers already there and add new page numbers.
Its a lot of work to align 750 court documents and then realize that you must move some and then realize the page numbers cannot be changed and thus begin to do this all over again to compile which can take about 10 hours.
My question is quite simple, but I hope that overall, I got my point. Sorry if I made it is too complex.
If no simple way, want to know if anyone has another different tool or a few recommendations to better highlight what I'm doing wrong.
Thank you for your review and response.
You should be able to update with tools - Pages - header & foot-
Update... It not work for you?
If this isn't the case, then try to remove from this menu and then re - adding them.
Tuesday, June 23, 2015 23:55, Fortune Mile [email protected]>
-
Im having problems printing of a revised document that I made changes. Ive saved the document with the changes, but when I print it, the changes are not there. How can I get the changes on the printed document?
In the print dialog box under "comment forms &", make sure you only select "Document and annotations.
-
OfficeJet 6835: Changing the settings for printing emails
I had to reinstall my driver software after the operating system upgrade. Now I can't print emails or attachments directly, but rather have to save first. I had this problem when I originally set up the printer and thought to it easily, but with the installation of confusion of the new operating system, I can not for the life of figure me out how to do so that I can simply print an email or an attachment. Help!
Hello
What browser or application are trying to print emails?
If you use Google Chrome open dialog box print, then press change.
Select your printer from the list instead of the default save as PDF option and try to print again.Otherwise be sure to specify accordingly.
Shlomi
-
How to DISABLE the HP Envy 4500 status/confirmation email after you have sent the print job?
I don't want to receive the email confirmation of the printer - how do I disable it?
Hello
Please sign in to your account connected HP
b click my account
b click on Notifications.
(c) uncheck the e-mail notifications
d save change
Kind regards.
-
HP Officejet Pro 8625 cannot change the order of printing back to the front and want to change
The Officejet Pro 8600 driver has a 'Page order' option in the driver, and it is compatible with the Officejet Pro 8625. You can install this driver in point 8.1 of Windows as follows: first download and install the driver Officejet Pro 8600 from HP here. When the installer asks how the printer will be connected select "ignore the connection at the moment, I'll do it later." After that go to printer and devices, right click on the Officejet Pro 8625, printer, advanced, pilot, new properties, then select a manufacturer HP (Hewlett-Packard) and select HP Officejet Pro 8600, next, done. Click the Officejet Pro 8625 properties, general window and in the rear upper part called Officejet Pro 8625 (or what you want the printer named...), OK. The Page order option will be available in the Advanced Printer Options tab.
Maybe you are looking for
-
Acer Aspire X 3300 memory update
I got my Acer Aspire X 3300 equipped of 2 X 2 GB PC3-10600 DDR3-1333 Ram type, can I switch type Ram DDR3-1600 PC3-12800? 4 GB? can I put the PC to more than 8 GB of RAM? Any help or answers are appreciated, thank you.
-
A security update cumulative for Internet Explorer 9 for Windows Vista (KB2761451)
This update won't install - get error code 8E5E03FB I tried to disable antivirus the fix - it tool nothing works
-
RALink 3290 802.11bgn adapter Wi-Fi-speed slow
HY, I have a 4540 s ProBook HP with Windows 7 Pofessional 64 bit and I found that the speed of the wifi is very low. The maximum download speed is 2.8 M/s. Isn't a conection problem because on other devices, I have a speed of 10 M/s. A problem with m
-
help by chance that I got rid of all the admins and need help to get back them
I played a joke on my father, but he pulled back please help
-
Installation of MS SQL Server 2005
I only am not able to install ms sql server 2005 on my 64-bit windows 7 home basic edition... Please help me... If psbl guide me step by step how to install it... actualy when I get it installed, it is not able to connect and instead displays error n