After formatting main HD and reinstall Vista 64, it cannot access a hard drives he could access format pre

Similar Questions

• After that computer failure and reinstalled Vista, can't activate

  I can't activate my Windows Vista Ultimate to be reinstalled after a crash. Told me that the key number is not a valid number. This can be. This is the number I used on this computer, all year last until the accident.

  * original title - I had a computer crash and have reinstalled my old version of Windows Vista Ultimate 64 bit, but the computer does not allow me to activate this additional new

  Use the phone activation, if necessary not to mention / enter anything, then a real person will answer

• Reencypting hard drive after unistalling and reinstalling Vista Ultimate.

  Ultimate window encryption.  I had to uninstall my vista ultimate and I had to unenrypt my hard drive to achieve.  The operating system has been reinstalled.  How do I reenrypt my hard drive?  The tpm? chip is not enabled and I had to use a flash drive in order to unlock my hard drive.  Thank you.

  Hi mpcaseyclu,

  The following article will guide you to encrypt your hard drive. Follow scenario 2: enable BitLocker Drive Encryption.
  See the BitLocker Windows Drive Encryption step-by-step Guide

  For your further reference:
  1 see set up your drive for BitLocker Drive Encryption
  2 see the Description of the BitLocker Drive preparation tool

  Visit our Microsoft answers feedback Forum and let us know what you think.

• What is blue screen and what to do and how to fix this with out taking back to factory setting and reinstalling Vista

  What is blue screen and what to do and how to fix this with out taking back to factory setting and reinstalling Vista

  When a BSOD (Blue Screen of Death) the system failure occurs, for most users, there not enough time to fully record what he says. the exact text is important for anyone trying to diagnose what is wrong. You can save time when the error occurs then by following the procedure described below.

  If you already did it disable the auto reboot system error. This should help by allowing the time to write the code to Stop error and related information correctly. Select Start, do a right-click on computer select Properties, advanced, system settings startup and recovery, system failure and uncheck the box before automatically restarting. Re-do not enable automatic restart in the event of system failure after obtaining this information, this setting is the best left to not allow an automatic restart.

  If the failure occurs during the initialization of the computer, you need to try a different approach. You can access the Advanced Options Menu of Windows on multiple computers by constantly pressing the F8 (key) key when starting and selecting the option - disable automatic restart in case of system error. This method is not always easy to use because it may be difficult to press the F8 key at the right time. Try again if it doesn't work the first time. On some computers, a different key must be used.

  Send a copy of your dumpfile as a shared file on your disc of sky with a link here.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

• Uninstall and reinstall vista and drivers etx

  Impossible to uninstall and reinstall vista

  Read the info below;

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• After replacing hard drive and reinstall Windows, DVD Player cannot play a Blu - ray disc.

  Original title: dvd player

  recently replaced HDD and reintegrated windows 7.  Now my dvd player cannot play a bluray disc.  Any ideas how to solve this problem?

  Duplicate the content of the thread:

  After replacing hard drive and reinstall Windows, DVD Player cannot play a Blu - ray disc

  My hard drive recently broken and we replaced and reinstalled windows7.  Now I'm watching a Bluray DVD and the drive will not read it.  I tried the fix auto and that said they detected a problem but can not fix this.  Any ideas?

  Hello

  You can check these links and try...

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  http://support.Microsoft.com/kb/982116

• I have Photoshop CS4 and I need to reinstall CD after a computer crash and reinstall Windows 7, but it will not be reinstalled I think because he used to completely uninstall. Can anyone help?

  I have Photoshop CS4 and I need to reinstall from CD after a computer crash and reinstall Windows 7 but it will not reinstall.

  This could be to uninstall because it used entirely from the control panel of Windows 7.  Can anyone help?

  Uninstall what you can the normal way via the Control Panel, and then use the CS cleanup tool.  Then try to reinstall. You might want to try an installation download rather than the disc if it continues to fail.

  Adobe Creative Suite cleanup tool

  helps resolve installation for CS3 thru CS6 and creative cloud problems

  http://www.Adobe.com/support/contact/cscleanertool.html

  CS4 - http://helpx.adobe.com/creative-suite/kb/cs4-product-downloads.html

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS3 and CS4: http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html

• My machine works all the microsoft Web sites. I can access the site for a few minutes, after a while, it displays a virtual memory and the next stage i cannot access sites Ms.

  Could not open the MS Sites

  My machine works all the microsoft Web sites. Formatted several times and doing a new installation, I can access the site for a few minutes, after a while, it displays a virtual memory and the next stage i cannot access sites MS. no software or installed applications. cool, but I can not go to Sites Ms. other Web sites, I can access.  Also tried to change the memory... no luck, I've seen other sites asking to change the settings of the modem or dial the ISP, but my 2nd computer work well on the same network, took my computer to the office network and found that the same problem exists... could someone help me please...

  Hello

  Please let me know if:

  1. you are able to access other Web sites, or the question appear with only Microsoft based sites?

  All other websites work well. problem only in trying to gain access to www.microsoft.com

  2. What is the operating system that is installed?

  Windows XP Pro.

  3. are you aware of the physical RAM installed?

  1 GB

  4 and it meets the minimum requirements of the browser you are using?

  For the past 2 years my laptop works fine with the same hardware configuration. It stops working suddenly MS websites. I did not have all the hardware changes.

  Provide answers to the following questions.

  a. also mention the name of the operating system that you use.

  Windows XP Pro

  (b) is there an error message that is displayed when the site no longer works?

  trying to access the page from www.microsoft.com when rises, it is 'Impossible to view the Page.

  c. What is the browser you are using?

  Tried it on IE, mozilla and chrome.

  I tried to change the size of the memory virtual and also changed to the size of the managed system.

  formatted and installed xp pro with sp3 and I also tried formatting and install from different cd with xp and sp2. It works for 3 or 4 minute MS sites and the message immedly appears low virtual memory and it stops working MS sites.

  tried to change the physical memory.

  Tried with different browsers.

  at the top does not a little luck. :(

  Method 1: Please visit the following link to change the size of virtual memory

  Change the size of virtual memory

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-the-size-of-virtual-memory

  Method 2:

  See the following links

  http://support.Microsoft.com/kb/967897

  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  http://support.Microsoft.com/kb/972034

• My main computer crashed and the data has been retrieved from the hard drive, including all of my Outlook Express dbx files

  I'll provide too much information because those of us who are computer knuckleheads think that everything is important since it is a mystery to us.

  My main computer crashed and the data has been retrieved from the hard drive, including all of my Outlook Express dbx files. There are four years of e-mails in these files and critical that I be able to open them.

  My only working computer running XP. It has Outlook Express is installed on it and was once used for e-mail, but not more and not implemented with my ISP to send or receive if it matters at all. Other that the sending and receiving of all the other functions of the OE program appear to be operational.

  I have read many explanations on how to open the files dbx on different sites - all is completely different and most seem well beyond my skill level.

  There is a fairly painless way to open these files? I don't want to try anything that could damage them. Please... any solution please guide me through in its simplest form - I am 64 but pretend you are explaining the process to a 7 year old. Yes, I'm that lame!

  Sorry for writing a novel and thank you to all who take their time to help the ignorant!

  I advise you to immediately copies of your DBX files restored. Save the duplicates in a place safe, and don't mess with them.
  Then try using one of the various tutorials that you have found on the Internet by using a copy of your DBX files restored.
  I did it a few times, but years ago and I DBX http://www.techrepublic.com/forums/questions/how-i-open-corrupted-dbx-files-in-oe/ visualization tool
  You just continue to make attempts, using a tutorial after another.
  As long as you have these unchanged copies of backup of your DBX files, you should survive it - other than frustration. Email PC remains a mess.

• My computer crashed two weeks ago and all software had reinstalled in another HD. The first hard drive still has all the files and are readable. Where can I find the old catalog fall back all my work?

  My computer crashed two weeks ago and all software had reinstalled in another HD. The first hard drive still has all the files and are readable. Where can I find the old catalog fall back all my work?

  My lightroom was great before the crash to work and I have a lot of work still pending.

  You will need the catalog file and all your images. If you have also stored your images on which crashed HDD you will need to copy them as well.

  The default location of the LR catalog file is in your user name folder in the folder on the ROOT of the drive users

• How can I move music and photos from my MacBook on an external hard drive, files without deleting the existing NTFS files stored on it?

  Hello.

  I am aware that this issue (or different versions of it) will be requested a thousand times before, but after searching on the internet for a solution, I have been unable to find all the information that brings a simple clear answer that is specific to my problem and so thought I would ask the question myself.

  I recently bought a Toshiba 1 TB external hard drive to transfer music, photo files and internal document in front of the memory of my old PC running Windows, as well as files, music and photos from my existing MacBook Pro, so I can "release" the memory on the latter.

  Transfer files from the old PC proved to be easy; success achieved by simple drag / drop the files to the appropriate location on the external HD icon of Toshiba which appears once I connected to a USB port. It is perhaps worth mentioning that the area of States hard drive has been formatted NTFS for Windows, and so I guess that I would not have expected any problems when transferred to a PC.

  Move the files from my MacBook has however proved anything but simple and trying to drag the respective music and photo files and drop them on the HD Toshiba icon (which appears on my desktop once it is plugged), I seem to be affected by the same issues as so much seems to have it before me, in that "forbidden access" / error symbol appears with the cursor , and bounce the files to their original location whenever I try to place them on the Toshiba HD.

  I understand that this is due to the HD is formatted in NTFS, and that I would need to reformat the hard drive to move files from my MacBook, which brings me to my questions:-

  (a) how do I do this, and

  (b) can I do this without losing, damage or remove the NTFS files from my old PC, which are already stored on the external hard drive.

  If one is able to offer any assistance, in the most simple, easy to follow the description, I would be really grateful!

  Never been so thanks in advance!

  1 install software such as Paragon NTFS on the Mac and let the reader in its current form or from the Finder, choose utilities go to menu, open disk utility and reformat.

  2. that by putting a copy on another drive. You should do this anyway, in case of failure of this drive.

  (141070)

• PC can see and access the laptop without asking for a user name and password but the laptop cannot access the PC because it asks me a username and password that I don't know.

  Vista - Windows 7 network connection. username and password is unknown.

  Hello

  I just got a laptop with windows 7 on it and I want to connect to my other PC for it, they are on the same network through a router. the PC can see and access the laptop without asking for a user name and password but the laptop cannot access the PC because it asks me a username and password that I don't know.

  If someone could answer this question, it would be great.

  Hello
  Maybe this can help.

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  ------------------------------

  If your network consists only of Win 7 and you want a simple network, use it.

  http://Windows.Microsoft.com/en-us/Windows7/help/videos/sharing-files-with-HomeGroup

  After you have configured the homegroup, scroll to the bottom for the Permission/security section.

  -----------------------------

  Win 7 networking with other version of Windows as a work network.

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have authorization and security problems, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . There must be specific users. All means all users who already have an account now as users. This does not mean everyone who feel they would like to connect.

  ---------------------

  *** Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Install Vista on a Partition on a hard drive recovery nine

  I'm working on HP Pavilion dv6500 laptop from a friend who was in Vista.  She never made the recovery disc and, apparently, the hard drive crashed while I install a new.  (Tries to recover, rescue / reformat all failed.)  Chkdsk, etc. failed too.)  I was able to copy the recovery on an external hard drive partition, but don't know how to install Vista from the BASE.wim (6.5gig) and other files that I recovered.

  Thanks in advance for the entry and if I have left out important info, please let me know.  Thank you.

  Drew

  Thanks for your reply.  HP wants $45.  And you say that it you can buy a HP burner too?  Also order at HP or buy a similar OEM from the same manufacturer?

  Hey DrewFDQ

  I only mentioned that question on the hard drive that some posters have had problems with hp after having replaced with non hp hard drives

  before doing anything on the hard drive to get the recovery disks and see if they work on your new hard drive

  they should

  It's only a couple of posters who brought her here and I thought I would mention it you

  You can replace a hard drive under oem license

  This isn't a problem

  good luck with the resettlement

  Walter, the time zone traveller

• My HARD drive is toast. Can I reuse my key of the Windows operating system to reinstall the same OS on a new HARD drive?

  My HARD drive is toast. Can I reuse my key of the Windows operating system to reinstall the same OS on a new HARD drive?

  You are allowed to change a hard disk with an OEM license

  If you have problems with Activation, which you shouldn't, try this method:

  Try this and take the Option phone hang for a real person explain to the:

  http://www.Microsoft.com/Windows/Windows-Vista/quick-start/activation-FAQ.aspx

  FAQ of activation to the. link above

  1. click on start and in the search for box type: slui.exe 4

  2. press enter on your keyboard

  3. Select your country.

  4. take the phone activation option and brace yourself for a real person. mm

  See you soon.

  Mick Murphy - Microsoft partner

• Problem in BBM blackBerry Smartphones - I do not have a display picture bbm Board and the State. I cannot access it and cannot access my photo or status of the contacts Panel

  I don't have a display picture bbm Board and the State. I cannot access it and cannot access my photo or status of the contacts Panel. Help, please!

  Thank you!

  Then you can try upgrading the BBM to the latest version available for your device?

  Make that first make a local backup of your BBM contacts, after backup, delete or uninstall any existing version of your BlackBerry. On your home screen, go to Options > Advance Options > application > BlackBerry Messenger > delete BlackBerry Messenger of this list (highlight BBM press on the menu key and select delete)

  KB10040 : How to view or delete the application installed on a blackberry smartphone 

  Once it is perform a battery pull reboot by removing the battery while your unit is powered, wait a min, then reinsert back.

  Finally, after the reboot, use your BlackBerry browser and go to www.blackberry.com/bbmdownload and download the latest available for your device.

  _______________________________________________

  Please note :

  If you encounter BBM7 or higher then your BBM Contacts are integrated into your BlackBerry ID after installation when you log in with your BlackBerry ID Contacts is restored back, but if you experience any previous Kathy then first make a backup local, you can save on your press card, see this KB for additional assistance

  KB20554 : How to back up and restore the BlackBerry Messenger contacts list