After getting my computer erased, I have no software to use my integrated webcam.
I have a Dell XPS L702X. Due to a hardware failure, I had to get some parts replaced. This resulted in a total deletion. Long story short, now I can't use my webcam. Not his own, anyway. The program does not exist. It can still be accessed and used by programs such as Skype, however. I was wondering, where can I find the right software that would allow me to use my webcam on its own?
Drivers/software available for a Dell are obtained on Dell's Support site, specific to your Dell tag #.
http://www.Dell.com/support/Home/US/en/19?~CK_=_mn
Tags: Windows
Similar Questions
-
I have a new laptop and my integrated webcam does not work
I need to get help fixing it. It's a brand new computer and the webcam does not work. When I try to access the program, it said that I need to plug a camera
Hey amaury Muñoz.
Welcome to Microsoft Answers Forum.
1. can you please tell us the model number of your computer?
2. is there a built in webcam or what is the model of your webcam?
Can you please give us a little more detail on what is the specific error you get when you try to use the webcam?
Check if you have the drivers installed for your webcam.
As you say that it is a Dell computer, you will need to go on the http://support.dell.com website to download the driver of your webcam installed.
Click on support and drivers.
On the next page, it asks your name and your number.
Select the exact model of your laptop.
This will bring up the option to select your operating system. Choose Windows Vista or Windows Vista 64-bit.
A webcam installed usually appears under the software - multimedia, but it may be different for your model.
You can choose to install now or download. Once it is downloaded and installed, then test again to see if your integrated webcam works.
You can also contact Dell for support, since this is a brand new computer. Here is a link to Dell's Support page options:
Thank you.
Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.
-
Driver IRQL screen comes after getting the computer error
I have a HP pavilion with a model number of the p7-1423w bought last November 2012. When I'm on the computer and/or internet I get a blue screen saying: driver IRQL_not_less_or_equal (NETIO. (SYS) and then my computer restarts. I checked online everywhere for a fix and do not understand what it takes to cause the explanations are long and hard for a computer novice to do. I don't know what's this problem and hope that its not dangerous. Can you help me solve this problem?
JoanieL,
Turn off the computer.
That you put it on press the F10 key. This will load the BIOS setup utility.
Press F9 to load the default values.
Press F10 to save and exit.When the computer starts up, check if everything is working.
Go to Device Manager and uninstall the driver network card wireless.
Restart the computer.
This will uninstall and reinstall the driver for the wireless.
How long have you had this problem?
I would like to know how everything goes.
-
I have no sound after having my computer wiped and reset for my personal use.
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas: the sound was working before. But I got it reset because the other owner info was still on it. (Information store... etc). I am not computer savy, but I would like a little noise when they work or play.
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Hi Blaine,
· What is the number and the model of the computer?
1. update the audio device and check the results. Follow the steps for the same thing:
a. Click Start,
b. click on run, type devmgmt.msc in the Open box and press ENTER.
c. find the audio device
d. right-click on the device, and then select update
2. follow the steps from the link below: no sound in Windows:http://windows.microsoft.com/en-us/windows/help/no-sound-in-windows?T1=tab02
You can also check: how to troubleshoot sound problems in Windows XP:http://support.microsoft.com/kb/307918
With regard to:
Samhrutha G S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Get the computed fields to be empty, except if used
Hello
I just created a purchase order and all works well.
However, the right column that rises to the top of all the elements of line, is a calculated field and shows "$0.00" even if this line is not used.
Is it possible to say to these fields, if they are $0.00 make the type invisible or white?
Thank you... I've provided a snapshot, so you can see the fields list.
Babs
If you do not use JavaScript for the calculations, you can add the validation script customized for each of the areas:
Field blank if it's value is zero
If (+ event.value = 0) event.value = "";
If you are using JavaScript, you can do something similar to the calculation script.
-
Cannot download Microsoft updates after restoring my computer Windows XP back to factory settings
I had to restore my computer windows xp to its factory settings. Now, it will not download updates. What can I do to fix this? I want to download the Service Pack 3 and other updates.
Hello!
After reformat the computer and you have all the drivers installed.try to download and install SP3 manually and then install all updates from Windows UpdateHere you can see the download link for SP3:See you soon!Makoi -
Recently, I'm subscribed to Acrobat XI after the test expired, but when I went to turn it on I was asked for the serial number. I don't have the order number on the invoice. How can I get the serial number for the trial software that is on my computer?
Hi Kenneth,
Subscription does not have any serial number. Please use your Adobe ID to update the licensed software.
Kind regards
Rave
-
Original title: I need a market to resolve the problem remove the instrument.
How can I get my computer my external USB drive (portfolio) after that I repeatedly get the message that the device "can not be removed? I have closed all other programs and waited for varying amounts of time, and tried all of the fixes that have been proposed on this site. Nothing works. I don't want to turn off the computer whenever I have to remove the device.
I can't know what "all patches" you've tried, but:
Make sure that the system restore does not monitor the external drive. SR does need to control the system drive and to the system drive, SR has only about 1 GB of space max. Make a right click my computer and select properties then the System Restore tab to configure SR.
Make sure that the Indexing Service is turned off (at least for the external drive). To disable disk indexing completely, which will also speed up your computer a bit, see http://lifehacker.com/031440/turn-off-indexing-and-speed-up-windows-xp. For the external drive, right-click on the drive icon in my computer, select properties and uncheck the indexing disc
There are different workarounds short to shut down the computer, but you might want to try this third-party app first:
http://safelyremove.com/index.html Among other features:The device cannot be stopped now. Why? Never encountered the situation when Windows does not allow you to remove a device? Unlike Windows, USB remove will show you programs which prevent the device to be stopped and let you close these programs or just files that they opened on the device.
-
I have a laptop with Windows XP. After getting a virus, I scanned with AVG and removed the threat. After re-booting, I can not connect to wireless internet. The icon shows "acquiring network address". I connected the router directly on laptop computer connected to the wireless network and still unable to connect. I tried to restore the system as well, but the message says "unable to restore the system, no changes were made. Help?
original title: acquisition of network addressHello, Steve.
Try this link below on how to reset IE and let me know if it helps. -
on this site - https://www.brickbodies.com/Citrix/AccessPlatform/auth/login.aspx
I can't get my computer to bring up my email in outlook express after I entered my username and password on this site - https://www.brickbodies.com/Citrix/AccessPlatform/auth/login.aspx
I have successfully downloaded client software (launch.ica file). I have a XP system. Help!Hi RodneyMcClinton,
· What happens when you try to access outlook express?
· You get the error message?
· Were you able to access emails using outlook express?
· Have you made changes on the computer before this problem?
Follow the steps in the article.
http://support.Microsoft.com/kb/813514
Reply back with the results.
-
Impossible to connect the computer to the internet after getting a virus
Firewall settings
I can't connect the computer to the internet after getting the following error message after I have used AVG 2011 to isolate and virus and rebooted my computer.
Windows cannot connect to the internet using HTTP, HTTPS or FTP. This is probably caused by the settings of firewall on this computer.
Check the settings of firewall for the HTTP port (80) and HTTPS port (443) FTP port (21).I can't connect the computer to the internet after getting the following error message after I have used AVG 2011 to isolate and virus and rebooted my computer.
Windows cannot connect to the internet using HTTP, HTTPS or FTP. This is probably caused by the settings of firewall on this computer.
Check the settings of firewall for the HTTP port (80) and HTTPS port (443) FTP port (21).Which firewall do you use? First, click on start > run > type inetcpl.cpl > Ok. Now, click on the "Advanced" tab On the Advanced tab, you should see a button to "restore the settings advanced". Click on the button. Follow the prompts all to confirm your selection. Then click on the 'Connections' tab > LAN Settings button. Make sure that there is a check mark in the box "Auto-Detection" parameters and that there is NOT a check mark in the box use proxy settings. Try to connect to the internet. Post your results please.
-
I have a Compaq PC with processor Dual-Core AMD Athlon X 2 5000, and it runs Windows Vista Edition Home Premium... In my view, that is running Service Pack 2. I use the computer to check my e-mail, my YouTube and Facebook accounts (and possibly other accounts spread I connect to).
I usually use Internet Explore to browse the web. Sometimes my computer turns off by itself due to overheating. But whenever when this happens, when I turn my computer back on and return to the use of the Internet, I've totally frustrated to find that all my accounts were automatically disconnected!
Even when I check these boxes to keep me connected to these accounts when I turn on the computer again after a successful stop, my accounts still get disconnected!
It only seems to happen when my computer turns off by itself without stopping... mainly due to overheating. When I turn on the computer again after a successful regular stop, my accounts are automatically saved on once again, due to activate me "Keep me connected" by checking these little boxes. But after a situation when the computer is off all the time (either by himself for a reason, either by me with strength to turn it off when my computer crashes), my accounts do not remain.
How can I prevent my accounts automatically be disconnected so that whenever I start the computer, after it turns off by itself, my internet accounts turned on? There must be a patch for this embarrassing situation here on the internet.
Perhaps because an improper shutdown / forced can inpact on different parameters.
Your must not PC in all cases be having heat problems, you need to fix this (heat) before it turns into something terminal
-
Try to get Inkscape and said I need xQuartz. I have OS El Capitan. It is already on my computer or I have to download it and is it safe to do?
Hello Alice,.
Here is the link for XQuartz: http://www.xquartz.org/
-
have 425 dn which is network. Can get a computer tray see 3, but other computers cannot
have 425 dn defined as network printer... Can get a computer tray see 3, but other computers cannot.
How can I get others to see tray 3
I'm sorry, but to get your question more exposure I suggest posting in the trade forums since it is a printer. You can do to Printers - LaserJet. Click new message.
I hope this helps. -
My mcbook used to synchronize my iphone6 it again to get the new version on computer and I have the new version of iTunes versionThis (11.4) is the current version.
iTunes version 12.3.2 is the latest version of iTunes.
Maybe you are looking for
-
Upgrade memory on Satellite L30
I have a Satellite L30 - 11 d and I am wanting to update the modules of memory in it, I found it; Part number: PA3411S-2M1G1024 MB (1 GB) memory PC2 - 4300 DDR2 (533 MHz) and it will work, but im not sure - you can have more than one connected to my
-
Can satellite P200-1EE - I get a Blu - Ray player for her?
Finally, Toshiba have joined the BDA!We know if or when they will release a Blu - Ray player to replace the HD-DVD drives in a P200-1EE? I know that this post may be a bit premature, but I felt betrayed, since the purchase of the laptop and Toshiba f
-
With the help of transformations and filters without device drivers
Hello I came across NIMS as a possible solution for some transformations and filtering, or generating data of the signal of the test for seismic application. I'm evaluating NIMS for optimal for what we need/want to accomplish. Basically, we have some
-
original title: Windows XP Pro product keys Different versions of Windows X is made? That is to say) the product key from your laptop will work with "ANY" XP CD (OEM or other) I know that with Win 7 there no difference My wife has an XP laptop that n
-
I had a hard time trying to close my computer. I get the above messages while closing. This time, when I closed, I can't my computer back to the top. What should I do to get this corrected and my backup system.