After installing microsoft essentials turn se computer
I have install microsoft essentials anti virus etc successfully, it will then run a quick check and finance 3 viruses and delete everything. Then it reboot bt itself. Now I can't go to any browser, restart the computer itself, it shows some quick blue screen and reboot.
Hi muhammedkhan,
· What happens when you try to access any browser on the computer?
It is possible that the infection by the virus is completely removed from the computer. I suggest that you start the computer in safe mode with network mode and later perform a full scan using Microsoft security essentials or Microsoft Security Scanner and check if it helps.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
A description of the options to start in Windows XP Mode
http://support.Microsoft.com/kb/315222
Computer viruses: description, prevention, and recovery
http://support.Microsoft.com/kb/129972
Tags: Windows
Similar Questions
-
PC became very very slow after installing Microsoft essentials and upgraded to the latest
After I installed and update Microsoft essentials, my pc has become very very slow, Microsoft XP Professional. Please help correct, this will drive me up the WALL higher. Thanx
No AV program is 100% foolproof, but I love MSE, and I run it on my xp system. Having two AV programs running at the same time is the cause of conflict and slow down your computer. You must make a choice on which you prefer and uninstall the other. If you decide to choose MSE, download a free copy of Malwarebytes AV to use as a backup scanner. then run MSE for real-time protection.
MALWAREBYTES
http://www.Malwarebytes.org/products/malwarebytes_free/
Of AVG removal tool.
http://www.Avg.com/us-en/utilities
Good luck.
-
Unable to connect to the internet after installing Microsoft Essentials.
Can't get internet, limited or no connectivity, have no file netbt.sys, how to find, download and reinstall the new netbt file
need help, loss of internet access after you download microsoft essentials and, now, after more research cannot find the netbt.sys file
Hi Ben,Follow these instructions to fix the NetBIOS over TCP/IP (NetBT) Service:Download netbt.reg and open it. Click Yes , and then restart your computer.Let me know the results.Brian -
Satellite A205-S5804 - after installing Microsoft sync, it does not start
Hello
This model uses by me. I downloaded it from Vista to XP.
After installing Microsoft Sync, you need to restart and my laptop does not start after that. HD is indicated and known on the BIOS.
Any help please?
BRHello
> After installing Microsoft Sync it requires a reboot and after that my laptop does not start.
And it does n average boot t?
You get an error message? The laptop freezes on start up? Do you get a BSOD?I put t know how you can solve this problem, but can you go into the advanced boot menu? You can start in safe mode?
In my opinion Microsoft installation synchronization destroyed something in Windows and in the worst case, reinstall the whole OS.
:( -
Error Windows Defender 0x800106ba after installing Microsoft Security Essentials
I have Vista Home Basic. I installed Microsoft Security Essentials, now Windows Defender gives me an error 0x800106ba message whenever I try to start. Does not work in conjunction with each other? And if so how can I make them work together?
Hello
Microsoft Security Essentials - answers Forum
http://answers.Microsoft.com/en-us/protect/default.aspxWindows Defender features are included in MSE, defender of loading would be redundant.
Windows Defender antispyware =
MSE is antivirus + antispyware.
Then think about MSE as Windows Defender with more added (which is).
Windows Defender and Microsoft Security Essentials
http://social.answers.Microsoft.com/forums/en/msestart/thread/5309cb8d-02e1-40E8-974f-0dcedb9ab9fdI hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
No network after installed security essentials driver
After the installation of microsoft security essentials today, none of my network/communication drivers are installed... code 39 error in the system information window... running XP home ed SP3 build 2600
Hi jman_67,
Try these steps and check the result.
Step 1: Uninstall the network adapter driver
a. Click Start, click Run, type devmgmt.msc, and then click ok.
b. in the list of objects, expand network adapters.
c. right-click on the sub element and click on uninstall.
d. restart the computer and check if the driver is installed automatically.Step 2: Install the network adapter driver
a. Please visit the website of the device manufacturer or the manufacturer of the system on the other computer.
b. download the right driver for your windows and save it on the flash drive.
c. connect the flash drive to the computer problem and open the driver file, and then install it.
d. restart the computer and check the connectivity.Step 3: If the problem persists, restore the computer
see How to restore Windows XP to a previous state .Visit our Microsoft answers feedback Forum and let us know what you think.
-
Keyboard problems after install "Microsoft Keyboard Layout Creator"
I bought a new keyboard, a Skyline 895 defender and she did not have some important buttons (such as <> |), so I installed MSKLC 1.4.
But it turns out it was a big mistake. Now I have problems with key combinations such as ctrl + c and ctrl + v.The questions are:
Sometimes there entry offset, sometimes the information is not copied to the Clipboard, and sometimes after pasting, I get a random amount of info pasted.
Basically, MSKLC makes my keyboard very unstable and I can't work with my workflow. I've been frustrated because of the randomnes which seems to happen on my PC after installing MSKLC 1.4.
I tried on another pc without MSKLC keyboard and it works perfectly, no lag, no randomness in Clipboard action.
It seems that MSKLC has a bug with combinations of keys. Is there a solution for this? Uninstallation of MSKLC will fix this problem and what are the good alternatives to MSKLC? Or do I have to reinstall windows because of this?
Thank you!
Hello
Thanks for posting your query in Microsoft Community.
The question you posted would be better suited in the MSDN Forums. I would recommend posting your query in the MSDN Forums for assistance:
Windows Hardware Development MSDN Forums
Hope this information helps. Do not hesitate to write to us for all questions related to Windows, and we will be happy to help you.
-
Captivate 7 stuck loading after installing Microsoft Office 2013
Before the problem started, I initially had Adobe Captivate 5 (No 7) and worked fine until I installed Microsoft Office 2013. As I tried to start Captivate 5, it gets stuck on the loading page, the Welcome screen never appears. After I checked this blog on the forum, which is to blame 3rd party fonts that can cause this problem to occur, I have never installed the fonts part 3rd - I knew not if Office 2013 come with additional fonts that are not compatible with Captivate 5. So, I removed 5 Captivate and installed version Captivate 7 track (32-bit) thinking that Captivate 7 will agree with all of the additional fonts provided with Microsoft Office 2013. Still having the same issue - cannot get the homescreen - stuck on the loading screen. Regardless, if I try to start the software or attempt to open an existing Captivate file by double clicking.
According to another blog on the forum, I also tried delete/rename the folder located in C:\Users\MYUSERID\AppData\Local\Adobe Captivate, but that did not help either. Now, I completely removed Captivate® 5, record of the directly, as I have installed 7 Captivate - still stuck with the same problem.
I am running Window 7 Professional (32 bit), have the latest version of Java SE 7 update 25 updated AIR downloaded and of course each time removed any software, I restart the computer to update the registration keys before installing a newer version of a software.
Help and advice will be greatly appreciated! Thank you very much!
Kind regards
Hello!
Please try the following steps
1. copy and paste all of the c: Windows fonts / Fonts to another folder on the desktop
2. try to remove as much as possible c: Windows fonts / Fonts (system fonts will not be deleted).
3. then try to launch Captivate 7, if it starts successfully while there could be a police related issue again.
4. close the Captivate 7 and then try to stick a lot of fonts from the folder on the desktop back to the c: Windows / Fonts and there still check if Captivate works very well.
Thank you
Parth
-
After installing windows XP Pro my computer does not start correctly
After you have installed Windows XP Pro on my HP Pavilion (updated to XP home), my computer will not end the restart process. I have repeatedly in a loop once the blue screen with the HP logo. When this has happened before after installing a pack of updates for XP Home, we just started in safe mode and then had it will restart at an earlier time, thus eliminating the updates. However, now when I try to start in safe mode, I get an error message that says: "Windows Setup cannot start in safe mode" and I leave safe mode. We hoped that by installing Windows XP Pro, this problem should go away. Can anyone help? I have read several other entries in the forum for similar problems, but they all have to do with updates. This is the first time I was not able to use safe mode, so now I'm stuck. I hope that I can avoid having to perform a full system recovery, since it is a long involved process and having once before, I always felt the same restart problems after installing updates.
PA bear,
Thank you for help... After reading several posts in the forum, one of them reminded people to check with the manufacturer of the computer so that possible solutions... and this is the solution here, I wish I thought of him earlier... I did a system recovery to remove the Windows HP Pro and return to the original version of the default value. Then I went to the HP site and downloaded the patch according to their directions. Problems fixed! :-)
Any PERSON HAVING HARD REBOOT YOUR HP PAVILION (with an AMD processor) after you install Windows XP service pack 2 or 3 updates:
HP has a patch that solved all my problems. Clearly, service packs contain information for Intel processors that is in conflict with AMD processors in many HP Pavilion desktop computers. You can go to their customer service solutions website and download the patch. Since I did it, I had no other problems. I wish just that I had discovered the solution until I had to do a full system recovery.
If your computer hangs on reboot 'loop', see if this info. HP will help you:
If you have had problems with XP updates, including service pack 2 or 3, try this page:
Before you install Windows XP service pack 3
Please pass on to other similar issues.
-
Hp deskjet 1660 printing error after "installed being successfully" on my computer
my hp deskjet series of 1660 is "installed successfully" according to my computer, however, when I try to print a test page, the print queue says under the status "printing - error".
Hi MattParsons,
1. What is the full error message you get?
2. you receive with the message error codes?
You can try to run the printer Troubleshooter and check:
You can also consult the following link:
Hope this information is useful.
-
Cannot install updates after installing Microsoft Security 2010
My daughter downloaded because he says we were infected. I tried 2 remove but after rebooting the system sound still there. I downloaded Microsoft Security Essentials but the Microsoft Security 2010 took my windows update and the security system can help anyone?
Hello
No one program cannot be used to detect and remove any malware. Added that often easy to
detect malware is often accompanied by a much more difficult to detect and remove the payload. If its
better to be too full now than to pay the price much later. Check with these extreme
Overkill point and then run the cleaning only when you are sure that the system is clean.These are fake antivirus, a scam to force you to pay for them so that they have no advantage
Not at all.
There are several versions with similar names to verify these and if none are
well please give us the exact name of the program as you see it and the link with
any Web site to which you are headed. (read the links to see aliases)Remove Security Essentials 2010 (uninstall Guide)<-- read="">-->
http://www.bleepingcomputer.com/virus-removal/remove-security-essentials-2010Remove the fake Microsoft Security Essentials Alert Trojan and AntiSpySafeguard<-- read="">-->
http://www.bleepingcomputer.com/virus-removal/remove-fake-Microsoft-Security-Essentials-alertHow to remove XP Security Tool 2010, XP Defender Pro and Vista Security Tool 2010 (uninstall Guide)
<-- read="">-->
http://www.bleepingcomputer.com/virus-removal/remove-antivirus-Vista-2010It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
the regular windows when you can.Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
(If Rootkits run UnHackMe)Malwarebytes - free
http://www.Malwarebytes.org/Run the malware removal tool from Microsoft
Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.
You should get this tool and its updates via Windows updates - if necessary, you can download
It's here.Download - SAVE - go where go out you there - top - right click RUN AS ADMIN
(Then run MRT as shown above.)Microsoft Malicious - 32-bit removal tool
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=enMicrosoft Malicious removal tool - 64 bit
http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en-----------------------------
also install Prevx to be sure that it is all gone.
Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs.
It is a single scanner, VERY EFFICIENT, if it finds something to come back here or use Google to see
How to remove.
http://www.prevx.com/Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.aspTry the demo version of Hitman Pro:
Hitman Pro is a second scanner reviews, designed to save your computer from malicious software (viruses,
Trojan horses, rootkits, etc.). that has infected your computer despite all the security measures you
took (such as antivirus, firewall, etc.).
http://www.SurfRight.nl/en/hitmanpro
--------------------------------------------Here are some free scanners online help if needed:
http://www.eset.com/onlinescan/
New Vista and Windows 7 version
http://OneCare.live.com/site/en-us/Center/whatsnew.htmOriginal version
http://OneCare.live.com/site/en-us/default.htmhttp://www.Kaspersky.com/virusscanner
Other tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1--------------------------------------------
Also do to the General corruption of cleaning.
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlThen run checkdisk (chkdsk).
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html-----------------------------------------------------------------------
If we find Rootkits use this thread and other suggestions. (Run UnHackMe)
I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Time protection real Microsoft Essentials turns off. Any ideas?
For some reason any Essentials Microsoft continues to jeopardize even if real-time protection is enabled. If I turn it on and turn it on again it shows computer is protected, any ideas as to why?
Hello
Make or do you have other products of anti malware/antivirus software installed?
If so, please run the appropriate removal tool:
List of product antivirus removal toolsPlease also read:
Microsoft Security Essentials consolidated FAQ
Microsoft Security Essentials Installation Checklist
Troubleshooting General error while updating
Hope this helps,
J
-
Connect to a wireless printer lost after installing Microsoft XPS Document Writer
Microsoft XPS Document Writer was installed on my PC via execution of updates automatically. Now, I have it on my PC and when I need to print any document that I can't find my printer Epson Stylus wireless by default instead I Microsoft XPS Document writer who now appears as my default printer and Microsoft Office Document Image Writer. Cannot find my printer wireless devices & Printers. Frustrating because I can't print any documents. Do I have to reinstall my printer wireless? Please can you help me?
Hello
Thanks for posting in the Microsoft community!
You have reached the right forum for your question.1. what happens when you try to print?
2. you receive an error message?
3. What is the brand and model of the printer?Method 1:
You can try the steps in the link and check.
http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-WindowsMethod 2:
You can temporarily disable the antivirus on the computer and check if you are able to print.
NOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacksMethod 3:
You can uninstall and reinstall the wireless printer and check.
Check out the link and check.
Resources for the resolution of the printer in Windows XP problems
http://support.Microsoft.com/kb/308028Just reply with the results. I'd be happy to help you more
-
No sound after installing Windows XP on the computer
Original title: no sound
I changed my computer to win7 for xp and now I have no sound, where should I go and how do I find out how to fix it
Hi FredrickPerry,
· What is the number and the model of the computer?
Method 1
See the link below and run the troubleshooter of audio playback, check if it helps.
No sound in Windows
http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
Method 2
If the previous step fails then I would suggest that you manually download and install the audio drivers for Windows XP by visiting the sound card manufacturer or computer manufacturer's website.
How to manage devices in Windows XP
-
Get error lack of mcf100.dill after installing Microsoft Street & trips 2013
I installed streets & trips 2013 but cannot start because my computer is missing mcf100.dill. Installed on the 2nd. computer; same message, how the missing mcf100.dill?
Install Visual C++ Redistributable to http://www.microsoft.com/en-us/download/details.aspx?id=26999
Use vcredist_x64 for 64-bit Windows and vcredist_x86 for 32-bit Windows
Maybe you are looking for
-
He looks so terrible how it scrolls now. Its too fast and it blurs the screen more than her. It makes me sick at heart, he stated that the "smooth" scrolling is now by default... y at - it an option to restore?
-
HY,I am not able to install the "SD card driver' that are in the CD-ROM 'tools and utilities. After cheking this homepage I reallised that drivers that exist are for another model (M10) or another OS (Win 2000). Where can I find real? Is it possible
-
How can I use on my mac powerpc applications intel based
I want to run powermac apps for ages on my mac intel, but it does not work, any ways I can
-
HP Pavilion dv-7-4180us: upgrade pavilion dv-7 from Win 7 to 10 to win?
Hello. I have a HP pavilion dv-7-4180us laptop. I think to be upgraded to win 10 when it comes out. The Best Buy Geek Squad says they can do and that my laptop is extensible. However, I need more details and guarantees. Where would I go to find out e
-
Waveform table do not see the time correctly
Hello I am trying to represent the time vs. keithley multimeter voltage using a waveform chart. The voltage is recorded properly, however, the time does not seem to match. It shows approximately 10 times higher seconds. See the attached VI where I al