After installing Vista, CD/DVD drive cannot be seen or read.

Similar Questions

• After installing Avast AV my computer cannot load Vista. HE continues to go to the Startup Repair, and it gives me an error of windows registry.

  ORIGINAL TITLE: Vista problems

  Hi I was wondering if I can get a few hekp with this question. After installing Avast AV my computer cannot load Vista. HE continues to go to the Startup Repair, and it gives me an error of windows registry. I idid a debbug and had no errors on the disc. Safe mode does not work. I tried restore to earlier date and nothing, went to the command prompt and type chkdsk /F. c: here's what I got the chkdsk cannot run because the volume is in use by another process. CHKDSK may run if this volume is dismounted first. ALL OPEN GERE to this VOLUME WOULD then BE INVALID. And then he asks me if I want to force a disassembly. Press o and had. Windows check the file system and found no problem. The last line says failure to transfer the messages saved in the log of the events with the 50 State. It's all I have.

  Hello

  What is the exact error message related to the windows registry?

  I suggest you follow the steps mentioned below:

  Method 1:

  Remove all external factors with the exception of the keyboard and mouse.and restart the computer and check if the problem occurs.

  Method 2:

  Restart the computer in last known good configuration (LKGC) and check if the problem persists. Follow the steps in the link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/using-last-known-good-configuration

  Method 3:

  If the previous step fails, follow the steps in the link:

  http://support.Microsoft.com/kb/927391

• How to recharge my hard drive with photos that are stored in iCloud.  After installing a new hard drive, there's no pictures found in the Photos, and I get this error "cannot find system Photo library named"Library.photoslibrary Photos".

  How to recharge my hard drive with photos that are stored in iCloud?  After installing a new hard drive, there's no pictures found in the Photos, and I get this error, "could not find the picture of system library named"Library.photoslibrary Photos".

  Soon as your App Photos or iPhoto lost track of your photo library, or there has not been migrated from your old drive. You can create an empty library and probably enable iCloud photo library for photos to upload to the cloud.

  Designate a library in pictures - Apple Support System

  

• I installed a new driver for CD/DVD; TSSTcorp CDW/DVD TS - L - 462 was of... CD/DVD Driver.but it does not read empty CD or DVD. It is said that there is no disc in the drive.

  After I install TSSTcorp CDW/DVD TS - L - 462 A ATA device of... CD/DVD drive, I played a cd & he played the cd. After I tried to back up my laptop, I was told to "put a DVD selected", so I did it, but it does not reconise dvd I set, so I put in a blank dvd, & press "use a dvd blank." but he did not read.  It keep saying "install an accessible dvd writable", or "there is no cd or dvd in the drive," what is happening please help.

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• How can I reinstall MS OneNote2003 after installing Vista?

  Hello everyone,

  I was a bit confused of the 'ExpressUpgrade' action, because I first thought I would get
  a DVD-Windows Vista upgrade, but as I can see in ModusLink he is named "Windows Vista Home Premium 32 bit DVD"... OK, it's done now, but that's why I have other questions:

  There was additional software and utilities already installed (I have a Satellite P100 - 463 WinXP).
  I know that there is this "step by step Toshiba DVD" who has first updates the BIOS, install Vista and then the drivers needed and utility (as "Toshiba Assist" and all the others, I guess). As it is written in the guide step by step, all programs etc. will be deleted, as formatting of the hardddisk, ok.

  But with the laptop, there wasn't "MS Office OneNote 2003" already installed and this program, I have not found on one of the DVD / CD. On the CD is 'MS Works 8.5' and on 'Tools-CD"that I was burning of 'C:\toolscd' there are things like"InterVideo Win DVD Creator"(the player) and"recorder of Sonic.

  On the "Recovery-DVD" is just the Image of Windows XP preinstalled + software etc and I think of course, there is also the OneNote2003, but like I said I can't find the setup.exe from OneNote2003 anywhere...

  Or could it be that OneNote2003 will also be installed with the installation of Vista? What is a "core" Vista, don't not patched by Toshiba? As I was reading in the Vista_Express_Upgrade_instruction_multilanguage.pd f (the manual "upgrade progressive", first BIOS is up to date, then installed Vista and here again I have to use the toshiba DVD to install the software and drivers...) Is it only "utiltities' as"Toshiba Assist"or as software?

  Last question: update after the BIOS that is needed for Vista, is still possible to install the "old" Windows XP + stuff pre-installed recovery-DVD or this BBIOD goof only for Vista update and I cannot restore the original recovery image?

  And anyway, can I install new stuff like Works 8.5 etc. on Vista or will I have problems with it?

  Thanks for the replies.
  Greetings, launchee

  Hi kai

  I know that the Vista upgrade is a bit confusing
  So I'll try to clarify some things:

  1.) Toshiba Recovery XP CD contains all Toshiba drivers, utilities and tools, as well as additional programs like OneNote, Win DVD, etc.
  It is not possible to install this software separately without using the recovery CD because these programs are part of the image.

  2.) as far as I know the received "Windows Vista Home Premium 32 bit DVD of moduslink company is not a restore CD but the real Windows Vista installation CD. That's why you need to install all the tools of Toshiba and the drivers after installing Vista. This CD does not include additional software such as OneNote or WinDVD

  So finally, you will be able to install Works 8.5 on Vista because you have one working on CD separately but it s not possible to install OneNote from recovery CD

  But you can try another way. You could create a second partition and you could install the Vista to the second partition.
  Laptop you would use the two operating system; XP and Vista. The Vista also provides a clean boot manager.
  Therefore, it is very easy to switch between the two OS's.

• My CD/DVD drive cannot read or write media.

  I get a message to insert a disc, but it is already in it.   When I reinsert the disc, I get the same message.

  Hello

  Looks like the drive has a problem, possibly a cleaning disc might help if he and the
  below are questionable solutions to what sounds like a hardware problem.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

• Laptop does not start after installing vista sp2

  My Dell XPS 1530 stopped working after installing vista sp2. He gave me instructions for installation, step 1 of 3 and it went all that they way up to step 3 of 3 and said its closure and never came back...
  Please let me know, how to start the laptop.

  Hello GoogleGuru,
  Thank you for visiting the Microsoft Answers forum.
  Because your computer does not start until the desktop computer, we were able to try the system restore to a point before you install SP2.
  Thus, with the computer is shut down. Press the power button, then press on and press F8 until you see the startup options, and then it will give you the ability to boot to the last known good configuration. (select it).

  If this does not work, you can try to boot from the Vista DVD and use the recovery console to perform a restore of the system to another point in time.

  Post back with the results.

  Thank you

  Martin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Problems with sound after installing Vista Ultimate SP1 on HP Pavilion Dv4

  I lost sound after installing Vista SP1 Ultimate on my HP Pavilion Dv4... everything was fine before. Help, please.

  Go to the HP support website and search for Windows Vista drivers for your specific model number. Also look for recent updates, even if your PC comes with Windows Vista preinstalled.
  http://welcome.HP.com/country/us/en/support.html

  If there are Vista drivers then download to a folder on your hard drive and install all of them, starting with the installation card mother/chipset drivers, then the SATA, LAN, Audio, drivers and other device drivers.

  J W Stuart: http://www.pagestart.com

• Error 0 x 80041003 after installing Vista?

  I get the following error message after installing Vista on my laptop. It causes the computer freezes. It will also freeze after restarting. I have not installed anything, or deleted all the programs. After researching on the forums, I discovered that it is a Vista/Microsoft error that happens regardless of the manufacturer of the computer or installed equipment.

  Microsoft has found the answer to this yet?

  Log name: Application
  Source: Microsoft-Windows-WMI
  Date: 2010-01-07 22:18:41
  Event ID: 10
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: SatellitePro-PC
  Description:
  Filter event with the query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA 'Win32_Processor' AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace '//./root/CIMV2' because of error 0 x 80041003.» Events cannot be delivered through this filter until the problem is resolved.
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      10
      0
      2
      0
      0
      0 x 80000000000000
     
      1434
     
     
      Application
      SatellitePro-PC
     
   
   
      ./root/CIMV2
      SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA 'Win32_Processor' AND TargetInstance.LoadPercentage > 99
      0 x 80041003
   
  

  Hello melm12,

  This problem occurs if the WMI filter is accessible without the necessary permissions. To resolve this problem, run a script to stop the event ID 10 messages. Here's an article in the knowledge base with details on how to do it: http://support.microsoft.com/kb/950375. Otherwise, it might be a hardware failure. Hope this helps you. Let us know anyway. Make it a great day!

  "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• How to restore the operating system after installing the new hard drive?

  After installing a new hard drive to replace a disc that fails, can you install windows 7 and the other necessary "tricks" to re-setup and driver discs Dell came with the computer? or you buy a new copy of windows 7?

  See the Dell system software installation

  I can find the most recent versions are:

  Windows XP x 86 http://ftp.dell.com/utility/Dell_System-Software_A06_R288017.exe

  Windows XP x 64 http://ftp.dell.com/utility/Dell_System-Software_A07_R288023.exe

  Windows Vista x 86 http://ftp.dell.com/FOLDER31331M/1/DSS_UTIL_WIN_R282536.EXE

  Windows Vista x 64 http://ftp.dell.com/FOLDER88660M/8/Dell_System-Software_A06_R282537.exe

  Windows 7 x 86 http://ftp.dell.com/FOLDER88692M/9/Dell_System-Software_A03_R282539.exe

  Windows 7 x 64 http://ftp.dell.com/FOLDER88677M/8/Dell_System-Software_A03_R282538.exe

• Am trying to re - install Acrobat 9 Pro (includes the Distiller) after installing a new hard drive. iMac 27 "2009, ElCapitan 11.11.6. I have the original dmg file. also have trid copying from back up. It seems to load correctly. When open ask for my pa

  Am trying to re - install Acrobat 9 Pro (includes the Distiller) after installing a new hard drive. iMac 27 "2009, ElCapitan 11.11.6. I have the original dmg file. have also tried copying from back up. Same thing is happening anyway. It seems to load correctly. When open it asks my password but not to its own serial number. It is open, but don't watch not at the full bar at the top, that the word Acrobat, and it does nothing? Worked very well before the old drive crashing. On the same operating system?

  Not compatible does not mean that it cannot work (even if sometimes this does not mean that). This means that it has never been tested and not be fixed; This often means people have seen strange and unpredictable issues.

  Acrobat makes changes to the system, it is always more vulnerable. DC Acribat is the current version. If the goal is to slow down completely, perhaps more profitable subscription activity.

• Is it possible to install a HD-DVD drive on a Satellite P20

  Hello world

  Is it possible to install a HD-DVD drive on my P20?

  My screen is dead, so I'm going to use this machine as a dedicated library attached to my TV.

  If I install an HD-DVD player, this would help a lot.

  Concerning

  Richard

  Hi Richard

  Are you really believed that you can use the new HD-DVD drive on laptop 4 years? Be a little more realistic!

• My MBP in trouble after installing the Wacom Intuos driver.

  My MBP takes almost 5 minutes to start after installing the Wacom Intuos driver, I remove and reinstall but no change!

  and it seems that the machine was very unstable and very slow, sometimes the beach ball appears and no response for a few minutes and works again!

  I try to contact Wacom support in Hong KONG but still no body to answer my call...

  Can be resolved by upgrading to IE captain? Thank you very much!!!

  Wacom driver: 6.3.15 - 1

  News by cheque to be:

  EtreCheck version: 2.6.6 (226):

  MacBook Pro (13 inch, late 2011)

  MacBook Pro - model: MacBookPro8, 1

  1 2.4 GHz Intel Core i5 processor: 2 strands

  4 GB of RAM expandable

  Bluetooth: Old - transfer/Airdrop2 not supported

  Wireless: en1: 802.11 a/b/g/n

  Battery: Health = Normal - Cycle count = 87 - SN = W01457N9TD3BA

  Intel HD Graphics 3000 - VRAM: 384 MB

  Color LCD 1280 x 800

  OS X Mavericks 10.9.5 (13F1507) - since the starting time: 4 hours

  Disc information:

  HGST HTS721010A9E630 disk0: (1 TB) (rotation)

  EFI (disk0s1) : 210 MB

  1 t MBP (disk0s2) /: 999,35 go-go (590,22 free)

  HD (disk0s3) [recovery] recovery: 650 MB

  MATSHITADVD-R UJ - 8À8)

  Configuration files: (Does that mean?)

  / etc/hosts - Count: 57

  Startup items: (Does that mean?)

  PenTabletDriver: Path: / Library/StartupItems/PenTabletDriver

  Startup items are obsolete in OS X Yosemite

  Launch system officers: (Does that mean?)

  [loading] com.apple.RemoteDesktop.plist -invalid signature!

  [loading] com.apple.screensharing.MessagesAgent.plist -invalid signature!

  Top of page process CPU: (Does that mean?)

  55% mdworker (3)

  4% kernel_task

  4% WindowServer

  2% fontd

  2% hidd

  MacBook Pro, OS X Mavericks (10.9.5)

  Speed up boot times-

  Start time - speed (2)

  Start time - speed (3)

  file/etc/hosts - fixing a pirate

  You might also consider adding more RAM. 2 places I've seen recommended more to buy reliable RAM are below. I have bought RAM several times to other World Computing and have always been very satisfied with the product and the service. They have instructions online on how to replace the RAM. OWC has also tested the RAM above what Apple says, it is the maximum. Now, I have 6 GB installed on an iMac 2008 so-called beginning limited to 4 GB and noticed an improvement.

  Crucial

  Other World Computing

• CD/DVD drive cannot write files

  My cd/dvd player can open and read the files, but it can not copy/writing files.  What should I do?

  Try to set:
  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/mats/cd_dvd_drive_problems I hope I could help

• VISTA HOME PREMIUM 643 ERROR MESSAGE AND COMPUTER SLOW AFTER INSTALLING VISTA

  I WANT TO GET MY PC RUN FASTER AND AFTER INSTALLING VISTA, IT SEEMS MORE SLOW TO EVERYTHING I TRY TO RUN I HAVE AN EMACHINES T5052 AND IT SAYS THAT I ONLY HAVE 1 GB MEMORY (RAM) BEFORE I WAS USING WINDOWS XP PLEASE I NEED HELP, THUS FREEING UP SPACE AND DO IT RUN BETTER

  OD WINDOW ADVANCED CARE?

  You must have only ONE AV installed; otherwise, you get crashes, freezing, program conflicts, etc.

  Defender is an Anti-Spyware, not an AV.

  The FREE Malwarebytes will work OK with them.

  And do the work that I advised to do. Mick Murphy - Microsoft partner