I installed a new driver for CD/DVD; TSSTcorp CDW/DVD TS - L - 462 was of... CD/DVD Driver.but it does not read empty CD or DVD. It is said that there is no disc in the drive.
After I install TSSTcorp CDW/DVD TS - L - 462 A ATA device of... CD/DVD drive, I played a cd & he played the cd. After I tried to back up my laptop, I was told to "put a DVD selected", so I did it, but it does not reconise dvd I set, so I put in a blank dvd, & press "use a dvd blank." but he did not read. It keep saying "install an accessible dvd writable", or "there is no cd or dvd in the drive," what is happening please help.
Hello
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.
Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.
Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr Fixit
Try this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtml
Your CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116
The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461
When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052
Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problems
CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/
Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problems
Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.
Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.
===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.
Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.
Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.
Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.
Forums - a lot of expert real help
http://Club.myce.com/
CD/DVD units
http://www.myce.com/storage/
Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.
DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.html
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
Tags: Windows
Similar Questions
-
I have problems trying to reinstall my printer software Kodak esp 7250. The area where you register the software is empty and the Browse button to choose a place is gray, so it will not go any further because if you then choose then says invalid path. Of course, it's an invalid path because it will not choose an or allow me to choose one. I contacted Kodak and after working with it for a while, they said it's a problem with the operating system. I have Windows 7 on a laptop Gateway. I need my printer and get very frustrated because nobody seems to know how to solve this problem. I was able to use it when I got to the laptop, but suddenly one day it wouldn't work. Help, please.
Hello
Thank you for your response.
Make the SFC scan and check the status of the issue.
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
I would also advise you to check the status of the issue in a new user account.
Create a user account:
http://Windows.Microsoft.com/en-us/Windows7/create-a-user-accountIf it works in a new user account, then you will need to fix the corrupted user profile. You can visit this link for the steps:
http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profileI hope this helps!
-
Original title: BAD USB
I have an Acer netbook. I was able to download my photos from my computer on a USB key until a few days ago. When I plug in the USB on my netbook and you want to open, it tells me that there is no disc in the drive? Why does it say this?
I am confused with this... I really hope someone can help me.
Thank you for your time in doing
Dido
Hey Toni-LeeFurlotte,
· Have you tried to connect to a different USB port?
Method 1: Try to connect the USB key to a different port on the netbook and check the issue. You can also connect the drive to another computer and see if the problem persists.
Method 2: Update of the netbook with the latest chipset drivers. In addition, install other updates of the device driver. Log in the Web site of the manufacturer to do the same thing.
Method 3: This problem can also occur if there is a drive letter conflict. A drive letter conflict occurs if the disk that is affected by the error is mapped to a reserved drive letter. I suggest you try to change the drive letter.
-
Original title: windows media problems
Why do my windows media sometimes not recognize that there is a disc in the drive when I am trying to burn music on the disc,If you restart WMP when this problem occurs, which helps?
It seems that the AutoRun or AutoPlay got disabled on your system. Please try the instructions in the following article to reactivate these:
-
I'll buy Adobe Creative Suite 6 Master Collection from a discount supplier and observe to install on my laptop and desktop PC (which is for my use only). The vendor said that there is no provision of the EULA to install double. What does the EULA say?
A single user license allows you to have two machines with enabled facilities.
-
Hello, im trying to install CS2 for my mac (yosemite 10.10.3) but it does not work because PowerPC is required! This means that I can't use cs2 with my version? and if I want to use ist what to do? Thank you friends
CS 2 is very old version that uses Power PC, but a newer version than Mac's Intel based processors. CS 2 has been designed according to the Power PC architecture.
-
iPhone iOS 9.3.4 - I tried to close my bank account this morning. I learned that itunes Bill AED1 twice but was not deducted from my card again. They said that they can only close down the account, once itunes deducted from my card. Please notify
Have you added or changed the details of payment or the address on your account and received temporary store operating expenses: on the payment card's authorization in the iTunes Store - Apple Support ? If you have your card issuer should automatically remove charges within a few days or more
-
I had this problem for weeks and only recently someone told me that it is perhaps for this reason.
I tried several things to fix, and one of those who created an error where when I clicked on drive E in Windows Explorer, it looks like:E:\ application not found
So, in the end, I wiped my computer and everything on it and rebooted again.
IT TOOK FOUR HOURS.
So, I've set up the computer as I did when I got it 2 years ago, and everything was fine. I could insert a disc, it reads that and I was able to install my game, no problems.
Now, I have reset everything up, and there are more than 2000 updates to update installed. So I did.
SO NOW, after all this, which took another TWO HOURS - he does not all disks again.
I play the Sims 3 - fiercely - and so I tried to re - install all my expansion packs, but it does not now.
I DON'T want to make that whole process again and install all my games before updating Windows, because I believe, even if I did that, once I've updated, I can't play the game, because my laptop does not recognize that the game disc is there.
Help, please.
I spent so much money on these games, and I love them! I don't have the money to buy a new computer.
I have a Lenovo Ideapad
Core i5 Intel
https://support.Microsoft.com/en-AU/KB/314060/en-us
Your CD-ROM or DVD drive is not recognized by Windows or other programs
Discussion here:
Your AutoPlay doesn't work maybe not properly.
-
Original title: problems after a system restore
Not just a system restore last night (Windows 7 OS). And now the various little things do not work quite as it should. For example, my windows media player said now that there is no element in the music library. He shows me how to include files in my library, but when I do this (and my old files are still there in my music) nothing happens.
Similarly, my favorites of the Explorer tab was empty. I restored an older version, but the bookmarks that were under folders still will not appear in the favorties tab, even if I can see them when I look at the old version, I used to restore.
Hello
-For what reason were you running system restore?
-What version of Internet Explorer is installed on the computer?
I would suggest trying the following steps and check if it helps.
Method 1: Launch Windows media player troubleshooting library and check.
Open the troubleshooter in the Windows Media Player library
http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-library-Troubleshooter
Method 2:
Favorites may not appear in the address bar of Internet Explorer 8 after the upgrade to Windows 7
http://support.Microsoft.com/kb/974852
To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
322756 (http://support.microsoft.com/kb/322756/ )
How to back up and restore the registry in Windows
If the steps in the Microsoft article above did not help, then follow these steps and check.
- Click Start
- Click on the computer
- Type %UserProfile% in the address bar
- Press enter on your keyboard
- Right click on the Favorites folder
- Click on Properties
- Click on Previous Versions
- Wait for the list of previous versions of load
- Select the version that you have lost the files/folders
- Click restore...
Hope this information is helpful
-
DVD Rom won't recognize there is a disc in the drive
My uncle gave me his old computer for Christmas. Before it was given to me it was sent for a tech restore the computer to factory setting. I think that they wrote zeros to the hard drive and started it completely.
I used a few weeks after I had put the computer because I had installed something that did not work, System Restore. I had not won it first, but always ended up doing a system retore to when the computer is first restarted.
Now my DVD Rom will not notice when a disc is in. Him sometimes turns on, but the computer does not appear there in a disk. I looked in my computer and the CD drive is listed as empty. Even when I try to play a DVD. The drive appears in the list player however.
Any idea what I could have done wrong or how to fix this problem?
Thank you.
LisaAC salvation,
· What is the service pack installed on your computer?
· What is the number and the model of the computer?
Follow the steps listed in the link below: how to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD: http://support.microsoft.com/kb/321641
With regard to:
Samhrutha G S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
I already followed your advice to remove the file plugins.dat from the .mozilla directory. The plugin has not yet appeared in the list of Add-ons. Anyone have an idea what might happen?
You can check the installation path of other plugins on the topic: plugins page.
I plugins in these locations:
/usr/lib/mozilla/plugins/ /usr/lib/browser-plugins/ /usr/java/jre1.7.0_45/lib/i386/libnpjp2.so
One possibility is to create a ~/.mozilla/plugins/ directory and place a symbolic link to the file to plugin Java libnpjp2.so in this folder to see if it helps.
-
The drivers installed correctly.
I can't make the box "Turn on network discovery" stay on either in advanced sharing options.It keeps going back to off when I check it. (I am the administrator)Thanks, but I already had my answer.
For the one who wants to know.I went clicked on 'Start '.Desired services.Clicked on Services, with the two gears on it.And everything that had to do with the Bluetooth activated.Set them as automatic.(For some reason, they have been disabled) -
CD/DVD drive does not read disks inserted
Original title: ASUS DVD-E818A6T DVD player
ON MY PORTABLE CD/DVD of weird things or readers seem to only happen when I created my wireless printer everything is OK but when ever I tryto run CD/DVD which have already run - now the discs are not read or as after investigation I always said that the drive is EMPTY - HELP!
Original title: ASUS DVD-E818A6T DVD player
ON MY PORTABLE CD/DVD of weird things or readers seem to only happen when I created my wireless printer everything is OK but when ever I tryto run CD/DVD which have already run - now the discs are not read or as after investigation I always said that the drive is EMPTY - HELP!
Hi, I had the same problem and very frustrated as my CD/DVD stoped working after an update by Microsoft, it wouldn't read any CD or burn anything. I had no chance after trying all the solutions offered by Micorsoft.
I tried my laptop manufacturing couple of times and had no answer, finally I got an email from those who proposed the solution. My problem was solved following in their footsteps, and I hope it solves the current problem of other frustrated users who tried the Microsoft solution and are always looking for an answer. I copy and paste the exact observation of my e-mail.
"For this issue, first remove the WEIRD Device Manager device and then analyze the change for a trial.
So again, please load by default in the BIOS as follows. Please turn on the laptop. As soon as you see the ASUS logo to enter the BIOS, press F2. Then press F9 to load the BIOS default. Then save and exit and then restart the laptop.
The BIOS flash procedure is now complete. »Good luck to all.
-
Satellite M-40, Mat * a DVD UJ - 831S does not read blank DVD
It does not read empty, brand new DVD discs: Sony, TDK, etc., showing "a drive not accessible" and with a memory full 0 kB! but it reads DVD movies
Hello
Have you installed the Roxio Easy CD Creator software on your laptop?
This problem may occur the Roxio CD recording program Easy CD Creator is installed on the computer, and if the version of the CD recording program is not compatible with Windows XP.Please check this page from Microsoft:
http://support.Microsoft.com/default.aspx?scid=KB; EN-US; 315350 -
Satellite P300 - CD does not read DVD
Purchased by Satellite P300-16 t about a month ago, using Vista Home Premium. Until today, my cd/dvd rom drive worked very well.
Now when I try and insert any dvd is not be recognized at all, i.e. that there is no disc in the drive. Audio CD play well, but any type of dvd or original dvd-r/rw is not recognized.
When you click on the player itself in 'computer' drive ejects then and I get a message to insert a floppy disk in the drive. I'm not too knowledgeable about these things, but I checked the drivers are up to date.
I've uninstalled and reinstalled the driver and also to set a system restore point upward on a week but still no luck. I prefer not to take it back to the store that I have pictures and videos now on the laptop and one galley to remove so if someone can provide that a solution would be grateful. I also deleted the values of upper register in redegit and deleted any software addition burning like nero. Now driving me crazy
Thank you
Post edited by: alibabaxx
Hello
> I've uninstalled and reinstalled the driver and also to set a system restore point upward on a week but still no luck.
OK... you have attempted to assign the OS to the point of time at the beginning, but have you also tried to boot from a Toshiba Recovery DVD.
If this problem is related to the hardware of the CD/DVD drive problem, then it shouldn't t possible to boot from the Toshiba Recovery DVD.
In this case, the CD/DVD drive should be replaced by ASP.But if it of possible to boot from the recovery Toshiba DVD so your ODD is not damage which could be only a software problem.
In this case a new installation of operating system and use of recovery DVDs should help solve this problem of CD/DVD drive.In my opinion it s worth a try
Maybe you are looking for
-
10.11.6 updating making my battery not charging?
Is anyone else finding this happens after they update to 10.11.6? I went through all the remedies suggested for this problem with no change. The only thing I have not tried is back to 10.11.5. Already done: Reset SMC Reset the PRAM Reboot into recove
-
I can hide no longer passwords under the tools/options bar. What should do?
I can no longer hide my passwords - the title of the toolbar in tools/options/security. They continually don't appear and I fear that someone else may be able to see them. The option to hide passwords.
-
Update 05/21/2012 continues to repeat after succesful installed
Update returns constantly after successful installation. What is the problem with the update today. I go to successfully and updating Microsoft install, restart the computer. It is said correctly updates installed. After restarting, the taskbar icon
-
Why some of my windows vista has stopped working on the main account.
Help and support fuction no longer works. When you try to use help and support in the start menu, I get the error that this program under constrution. This works very well in my seconcary accout. This is for help and support, which is in the start me
-
Of defrag does not work due to the custom configuration created by another program
When I try to do a defrag, I get a message saying "disturbance disk currently uses custom settings created by another program" Before changing the annex, you need to remove the custom settings. Here's this message 2 boxes, 1 said 'delete settings' a