After installing XP, I don't have Wi - Fi or sound on my computer

Similar Questions

• Satellite A200 - after installing XP I don't have internet connection

  I installed XP on my satellite A200 and internet does not work. I changed BIOS, installed all the drivers available and I have a problem.

  Although it shows me the WiFi networks that are ready to go. When I try to access it is not. When I connect my ethernet cable from my router it says its connected well but there is no transfer or no internet connection.
  Everything seems to be ok, but I can't step on line...

  Can someone help me?
  Please...

  Hello!

  After installation of XP have also installed drivers? In particular the Ethernet and WLAN card driver driver. The two you can find on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  In addition, you should check for yellow exclamation marks Device Manager.

  Also make sure your router has an internet connection. You can check in the router configuration.

  Last but not least to check the card WLAN and LAN TCP/IP settings. If your router is using DHCP, you must activate or try static ip addresses.

  Good bye

• Microsoft Picture It 2000 install not I don't have IE5.

  I was wondering if there is anyway to ignore the part of Internet Explorer 5 during the installation of the software? Microsoft's patches out there that will work for this particular software to install.  It will install not I don't have IE5. I also tried compatibility mode, and it does not work unless I did something wrong.  Any help would be appreciated.  Thank you.

  Hi grungychick,

  Thank you for using answers Forum.

  Here is a link to some suggestions for solutions to your problem:

  http://www.microsoft.com/communities/newsgroups/en-us/default.aspx?dg=microsoft.public.pictureit&tid=43964a6c-8239-4757-ad0d-f97aa510078b&cat=en_US_7dae7f49-ed43-433c-ab5c-ebf580261aa5&lang=en&cr=US&sloc=&p=1

  or here

  I don't think that you will be able to install IE5 on XP either.
  You may be able to find a package type 'several Internet explorer' from a supplier of software of third party.

  I hope this helps.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• After installing SP2 for Vista, everything that I try to print from this computer prints in poster format.

  After installing SP2 for Vista, everything that I try to print from this computer prints in format post little matter what I tell the printer to do.  I use a laptop Acer Aspire 9410, 32-bit, Windows Vista, IE 8.  Commands from another computer on the printer work properly.  Should I uninstall SP 2 & reinstall?  Or what is the best fix for the problem?  Thank you.

  shagen18,
  You need to uninstall the printer and make sure you have the latest drivers from the manufacturer of the printer and then reinstall the pritner.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I don't have a windows recovery disk and my computer is affected by virus now, I am also not able to downloat antivirus because some files are missing please advise__

  I don't have a windows recovery disk and my computer is affected by virus now, I am also not able to downloat antivirus because some files are missing please notify

  Please see: How to replace the lack of software Microsoft Carey Frisch

• I currently have 13 items in Photoshop and it was on my windows computer, I recently bought an Apple Mac computer.  I have the disc to download the 13 items on my Mac, but I don't have a CD drive on my new computer, is there a web site I

  I currently have 13 items in Photoshop and it was on my windows computer, I recently bought an Apple Mac computer.  I have the disc to download the 13 items on my Mac, but I don't have a CD drive on my new computer, is there a website I can load the program and enter the serial number to download the program on my new computer?

  Is there a website I can load the program and enter the serial number to download the program on my new computer?

  Download Photoshop Elements | 10, 12, 14, 11, 13

• How can I re install Windows Vista after upgrading to Windows 7? I don't have any disks that came with my computer reset.

  original title: what am I doing here? Help, please

  the computer that we originally came with vista home premium installed on with no disc reset and I want to change Windows 7 to vista, but I don't have the disk to reset for it, anyone know where I can get the drive, or if it would be possible to reset HP windows vista 7.

  and I have all the vista files in a separate hard drive

  I really need help can someone help me please

  Hi Jesse,.

  I suggest contacting the manufacturer of your computer to obtain the replacement installation discs for Windows Vista:
  http://support.Microsoft.com/kb/326246

• I bought a computer with Photoshop CS6 already installed, but I don't have serial number - can always transfer the software to a new computer?

  I currently have a MackBook with Photoshop CS6 installed. It came with the laptop when I bought it on eBay, so I don't have the serial number of the software. Can I still transfer Photoshop CS6 of this laptop to a new one?

  Thank you

  Jack

  N °

  Who sold you the laptop should have deleted the software first or passed through the appropriate process to transfer the license to you. Chances are they used it to get an upgrade, in which case he would not still have to can be transferred.

• How to re - install when I don't have a disc?

  I can't use my Adobe Photoshop Elements 10 because of a pop-up.  I was told to uninstall and reinstall.  I know how to uninstall.  How to re - install if I do not have a disk?

  You can download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  Photoshop/Premiere Elements 10:

  l http://prodesigntools.com/Photoshop-Elements-10-Direct-Download-Links-PSE-Premiere-pre.htm

• I want to reinstall my Win 7 home base, it was pre-installed so I don't have the product key, no cd installation?

  I tried Win 8 (trial version) and now I want to re - install my Win 7 Basic Home Edition. It was preinstalled on my lap top so I only have the genuine product key, but no installation cd. How to re - install?

  New computers coming often pre-installed with Windows 7 have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  This is how the recovery partition is available for the most popular brands

  For Dell, press CTRL + F11 directly after switching on the device

  For HP, press F11 directly after switching on the device

  For Toshiba, press and hold "0" BEFORE and during the power upward

  For Acer, press and hold ALT + F10, as soon as you see the logo

  For Asus, press F9, as soon as you see the Asus logo.

  Advent, restart your computer. Then, press F10 repeatedly until the message "Starting system recovery"

  or

  Reinstall Home Basic

  You will need a whole in a single installer disk that you can use to select Windows 7 Home Basic Edition during installation. See the following for instructions:

  For a DVD that contains all the flavors of 32-bit and a DVD that contains all the flavors of 64-bit Windows 7: Starter,Home Basic , Home Premium, Professional and Ultimate see here.

• can't download adobe reader - message indicates that new version already installed but I don't have Adobe reader installed

  It all started when I tried to download the latest adobe acrobat reader update is 10.1.13 but update failed so I deleted the program and tried to download a new version. When I tried to download fails and messages that I already have the new version. Then I checked my system and do not have Acrobat reader.

  I don't know why you get these errors; After running the cleanup tool, nothing like this needs to happen.

  But let's try another approach; Download and run

  1. vacuuming ( http://labs.adobe.com/downloads/acrobatcleaner.html) tool new
  2. the MSI 10.1.0 installer
     • English: http://ardownload.adobe.com/pub/adobe/reader/win/10.x/10.1.0/en_US/AdbeRdr1010_en_US.msi
     • French: http://ardownload.adobe.com/pub/adobe/reader/win/10.x/10.1.0/fr_FR/AdbeRdr1010_fr_FR.msi
  3. the 10.1.14 update http://ardownload.adobe.com/pub/adobe/reader/win/10.x/10.1.14/misc/AdbeRdrUpd10114.msp

• I have a copy of Windows 7, I want to install but I don't have my Windows XP disc. Can I install Windows 7 without the Windows XP disk?

  Hi, my desktop has XP pro top. I lost the installation disc. I have a premium version of W7 (32 bit) I would like to install. Can I do this without the disc XP pro?

  original title: install Windows 7

  When upgrading from Windows XP to Windows 7, you must perform a custom (clean) installation because there is no real upgrade path. Perhaps the links below will help:

  Clean install Windows 7 with upgrade media
   http://www.winsupersite.com/article/Win7/clean-install-Windows-7-with-upgrade-media

  Clean-install Windows 7 from upgrade disc
   http://WindowsSecrets.com/top-story/clean-install-Windows-7-from-the-upgrade-disc/

  Kind regards

• My computer crashed and Vista went; It has been pre-installed so I don't have disks; can I install a Windows 7 upgrade?

  I can't find my Vista even though when I type "winver" in the start menu, the computer says my I have Vista. Can I just install an upgrade of Windows 7 instead of buy a start-from-scratch OS? Thank you, Michael Higgins

  Hello

  There are different methods to reinstall Vista, without purchase you another license...

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• How can I reinstall windows after new HD, but don't have windows or recovery discs, I have valid Vista COA and the product key

  I have a laptop Acer 4720 with valid product key of Vista Home Premium OEMact and COA label, my problem is the HD is broken and I need to install the new HD and then reinstall windows, but I have not all disks (was on the recovery partition which is good), so what are my options? Can I use any family Vista Edition installation disc Premium and then activate my license key?

  Hi again,

  You use the product key on your computer case with the Installation DVD Microsoft process.

  As I advised alreasdy, recovery from other manufacturers discs are of no use for this

  The only thing is that you may need to make a phone Activation, do it this way and not use auto invite, but hold the line for a person to physically respond to your call.

  I would advise not to download an ISO of Vista on the Internet, you will find that they are pirated and malicious programs containing versions changed.

  The DVDs are not available from Microsoft.

  When I informed 'borrow' that's what I meant. a friend, acquantance workplace, etc.

  Or if you know someone with the same model of Acer and Vista operating system, you might try their recovery disks.

  See you soon.

• How can I get Dell 720 all in one printer to print using Windows 7. I uninstalled the program for the printer, as someone said, now, I have no driver to install. I don't have the disk.

  My printer suddenly stopped printing with the message that my printer port configuration is incorrect. I tried to get the information online, but nothing has worked. I have no driver for reinstall the Dell 720 printer.  I know its an old printer, but last year when I got this Dell, I got a response from you guys who have worked.  I was able to print using my old printer with Windows 7 so far.  Help, please.  I don't really understand tecky language so please be gentle!  Thank you very much!

  There is the answer to your question is here...

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/cannot-get-Dell-720-printer-to-print-Windows-7/ab2cec8f-B267-4654-9f5f-9e9a48eac1c0