After mistakes XDB, cannot enter the APEX workspace

Similar Questions

• URGENT! After installing 6 Fusion and creation of new virtual machine with Windows 7, I get a message "VMware Fusion cannot enter the unit". WHAT SHOULD DO?

  After purchase, installation and activation Fusion 6 with the license key, I had a library of VMS showing 2 Boot Camp partitions. It's strange that I only have 1.
  I tried to activate them but received a message that it is out of date in 2 cases. (see annex 1)

  I started a new virtual machine with a Windows 7 installation disc directly on my HD. I have provided a way to do this and followed the instructions of Fusion to the screen.

  Apparently, everything went well and after several restarts, the installation appears to be over (see annex 2) I tried to open and run the installed Windows 7. I had however a window with the following message:

  "Pending the unit.

  "VMware Fusion cannot enter the unit. Please wait until the unit starts automatically, or interact with the virtual machine below. ' (see annex 3)

  Here Windows 7 seems to start but after a while with the home screen and of the Øresund finishing this window closed and open a new window called library Virtual Machine on the left showing the partitions of Bootcamp and the Virtual Machine Windows 7 x 64 and in the middle gray a representation of what is supposed to be the Windows 7 desktop. (see Exhibit 4). When I opened the settings button a window with different setting options pops up. This mark means to me that Windows is installed but the final opening isn't the case

  When you quit Vmware Fusion indeed Windows seems to be close (see part 5)

  What is going on? What has gone wrong? What should I do? I don't know how to solve the problem.

  I should f.i. remove the virtual machine from Windows 7 and is free automatically made partition on my HD as the reboot with the Windows installation disc? or y at - it another way to enter the UNIT?

  Help, please!

  Thanks in advance

  Your virtual machine is running. It is in the unit - which each windows gets its own window of Mac - and you have no application Windows running, there is no visible windows. You can start a Windows application in the start of Fusion menu in the menu bar at the top right, or turn on the Windows task bar on the view menu and start applications from there. Or use the view menu to switch to the Single mode or full-screen, which puts all of your Windows desktop in a window separate from Mac.

  You do not have two partitions to Boot Camp on your Mac, you have two virtual machines named "Boot Camp partition".

  The message about it being unable to enter the unit arrives while the merger is pending for the tools begin to run, because the tool is necessary for the unit.

• Tecra M5 cannot enter the BIOS to change the setting too boot from cd first

  Tecra M5 cannot enter the BIOS to change the setting too boot from cd first

  I bought on ebay and the seller sold me a dubious version of xp so I want to format and install my own at the start he said:

  The Intel Boot Agent GE v1.2.31 initialization
  KE - E05: the LAN adapter's configuration is corrupted or has not been initialized. Boot agent cannot continue

  Hello

  The message looks like you tried to boot and install Windows LAN

  If you want to change the boot order, I recommend pressing the F12 key, immediately after that the laptop was turned on!

  A new start menu should appear, then you can choose the reader of CD/DVD (ODD) and a boot device.

  Also by pressing the C button should allow you to boot from the CD inserted, bootable.

  Welcome them

• After Vista update cannot find the external hard drive, AutoPlay does not work, and new unusable disk appears under my computer

  After Vista update cannot find the external hard drive, AutoPlay does not work, and new unusable disk appears under my computer. Also I can't 'manage' my computer because I do not have "permissions". I tried a fix he 45071 and it did nothing.

  Applications, (Norton and McAfee) (including free evaluation versions are notorious for not not upgrade (or uninstalling) itself.) If NIS has been installed for 3 years, you have NIS update at least once and maybe twice (e.g., NIS 2009 > NIS 2010 > NIS 2011).

  [You may want to print these instructions for reference offline. If a step said to reboot, reboot.]

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your handy product key, uninstall all Norton software (including LiveUpdate and everything Norton Add ons) viaControl Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view).

  4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.

  NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #7 below!

  5. right click on the file that you saved in step #1 above, and then select run as administrator.  DO TAP not your keyboard until the race ends, then restart.

  6. do a clean install of NIS 2011 (using your product ID, if need be) & reboot. CF. http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

  NOTE: Do NOT activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately.

  7. manually and repeatedly run LiveUpdate (Norton) until you get a prompt "no update more".

  8. open Internet Explorer (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  9. open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run that set it by DEFAULT and modes and AGGRESSIVE. [1]

  10. restart once again & test.

  NB: Installation KB971029 disables AutoRun/autoplay on USB connected but not 'brilliant media' external drives (i.e., CDs & DVDs). See http://blogs.technet.com/b/msrc/archive/2011/02/08/deeper-insight-into-the-security-advisory-967940-update.aspx

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Computer will not conduct the office and cannot enter the Bios.

  Original title: cannot get into the BIOS

  When I turn on the computer, the logon screen is shown with details of the computer.  The computer won't proceed beyond this point.  So I can't enter the BIOS when I press the DELETE key and there is no way the computer goes to the office.    What can I do?

  Hi Ivor,

  1. you receive messages or error codes when you try to start in normal mode?

  2. did you of recent changes on the system?

  Usually, you must press a key (for example, F2, F12, DEL, ESC) or a key combination whenever you turn on your computer but before Windows starts. The choice of the function key varies depending on the brand of your computer.

  For more information, you can consult the following article:

  BIOS: Frequently asked questions

  If you are unable to boot into normal mode, then check if you can boot into safe mode and let us know the results to proceed to further troubleshooting.

  You can view the following items to start in safe mode.

  Startup options (including safe mode)

  Start your computer in safe mode

  Hope this information is useful.

• ThinkPad 13 - cannot enter the UEFI BIOS without entering the W10 first

  I have a brand new 13 Thinkpad which I'm really pleased.  However, the user manual seems to be wrong.  I can't enter the UEFI BIOS in F1.

  It seems that the only way to get into the BIOS is first go to W10 and make a shift/reboot or a restart/F1.

  OK, suppose that at some point in the future I need to access the BIOS (ex: changing boot options) and is not a job W10 or perhaps corruption W10.)

  How to enter BIOS without first W10? BIOS maybe consulted independent of the operating system?

  Hello and welcome,

  It is by design.  "Shutdown" in Win 10 more resembles the hibernation and it is not safe change hardware/BIOS setup in this State.

  F1/F12/ENTER should be available after a boot failure or a forced shutdown via a long press on the power button.

  BTW, UPDATE/restart and restart should just do the same thing. SHIFT button should cause a real stop after a followed Fx market should work.

  Z.

• Cannot access the Server Workspace external URL

  I am able to access everything successfully while I'm on the server, but I can't seem to access the URL of the external workspace to the server
  Here are my steps/symptoms:
  
  -All URLS are running on the server, (for this example, I'm mostly focused on FDM and workspace)
  using http://localhost/hyperionfdm and http://localhost:19000/workspace/index.jsp
  
  -Turn off the server I use correctly the URL below, FDM url functions but workspace does not have.
  http://Generic.com/hyperionfdm and http://generic.com:19000/workspace/index.jsp
  
  I also tried http://generic:19000/workspace/index.jsp and http://generic.com/workspace/index.jsp but no work
  
  -When I try http://generic.com/hfm off the server, I get a page with just "hfm" on this subject. I understand that this isn't a road to the workspace but that he wanted to provide the information, since it came on other threads that I read while researching this.
  
  I re - run the EPM system for web server configuration, but it doesn't seem to change anything.
  
  Please let me know if you have any ideas on anything to check or how to solve this problem.
  
  Thank you

  What is generic.com? What is a load balancer or a simple dns name?

  If it's a load balancer might be mapping generic.com to port 80. Which means that it is mapping to IIS (80) instead of the server (19000) web of OSH. In this scenario, there would be no logic to a port after it because it would be not mapped hollow LB.

  Get the IP address of the host and, also, to check the ip address of generic.com using NSlookup - are they the same ip address? If not - you have a load balancer and need to reconfigure it to point to 19000 (or reconfigure your ports)

  If they are the same.

  from the telnet ip 19000 host work? -If not maybe he doesn't listen on the adapter and only localhost or some IPv6 issue.

  off-host telnet ip 19000 work? If this is not the case, perhaps you have a firewall in place blocking port 19000.

  Check ipconfig on the host - are there multiple cards?

  Thank you
  Nick

• Cannot change the default workspace

  I can't change the location of the default workspace for one of my own choices. Flex prevents the creation of a "Flex Builder Moxie" folder in my documents of the same user after that I have trash and complains when he can't find him (errors such as not can save main table).
  
  How can I permanently change the location of the workspace?

  You use the file > Switch Workspace command?

• HP G62: Cannot enter the BIOS menu, system will ask the admin password

  I just bought a HP G62.

  I add 4 GB DDR in order to get 8 GB total.

  When I try to enter the BIOS meny, prompted me the admin password.

  The seller told me he never entered a BIOS password.

  Could you please help?

  It was a keyboard problem.

  I found the solution here:

  http://dogber1.blogspot.fr/2009/05/table-of-reverse-engineered-BIOS.html

  The tool mentioned that the passphrase using a qwerty keyboard.

• Laserje CP2025n: Cannot enter the secret menu on the printer HP Laserjet CP2025n range

  I need to replace making paper rolls in the printer. I found countless videos and instructions on how to enter the secret menu for ultimatly choose "Pickup rollers" option to block in place. The combination is by pressing the arrow to the LEFT and the red button to cancel at the same time which should then display "2ndary Service" option Menu.

  I'm doing something wrong? Is it because it's a CP2025n and not a CP2025?

  -Bill

  I thought about her from another Web site. IDK why but below has been what has worked.

  1. Hold the left arrow key)<). the="" display="" will="" continue="" to="" cycle="" through="" setup="">
  2. Press Cancel (x), then release the button left arrow)<). now="" an="" additional="" "2ndary="" service"="" menu="" will="" appear="" in="" the="">
  3. With "2ndary Service" showing (use arrows left/right, if necessary), press OK.

  So instead of building and now their whole (which is what most sites say) you must keep LEFT and hit CANCEL it once everything by letting go of the LEFT.

  Was able to access the menu 2ndary servce.

• After Effects CC - cannot see the new cinema 4 d features

  I subscribe to the creative cloud for After Effects only. On the Apps page I selected and downloaded After Effects, but meanwhile, I realized that I had a trial version of CS6 on my mac, so I deleted the folder. Obviously, I didn't know that it would be a problem that I thought that the new version would create its own folder AE CC. Thus, the Application Manager told me that AE is installed and ready but I have had no file on my mac. So I re-installed the trial version CS6 and registered but I don't see any of the new Cinema 4 d has in my version of the software - 11.0.2.11

  Can anyone suggest anything?

  You don't see anything, because CC is not yet available. June 17 is the day.

  Mylenium

• Cannot start the apex

  Hello
  I worked with an application in the apex for a few months now. All of a sudden, I can't access my request - I know my username and password but it won't let me in the app - not even the admin of the application part. Is it possible this diagnosis? I have to do a demonstration of this application in two hours.
  
  Thank you

  And the ANONYMOUS account is always unlocked?
  Otherwise try to reset the password for this account.

• Cannot enter the W530 UEFI Bios (same as T530?)

  It seems that I had the same problem that customers have with the T530.

  After removing the password from the bios, I have no chance to get into the BIOS.

  BIOS version: 1.11 (uefi enabled only)

  OS: Windows 8 (x 64)

  I tried:

  -Remove all drives (mSATA SSD, ODD, HARD drive)

  -Press F1 in the Lenovo screen

  -Tried all the options in the Windows Start menu

  -You press the Enter button to the Lenovo screen

  Unfortunately there is an update of the BIOS for the W530. So how I get into the BIOS?

  Solution: update the BIOS 2.06. That access to the BIOS is no longer a problem.

• After update Android - cannot enter mobile Xperia Z2

  Because I can't find my first post, I try again...

  Hello!

  I just updated my mobile phone via a WLAN. After that, he said I changed my SIM card. Which is not true. It is turned off and turned on again: I type my SIM card password and seeks a different password. And I have absolutely no idea of that.

  I use AVG Anti - Theft Protection. But this doesn't seem to be the required password. I tried. I also tried to remove the SIM card and put it back. The problem remains.

  So I can use the emergency mode. Here is a picture of what the home screen looks like now:

  

  That's what I asked when I touch the screen (it also says "to unlock by scanning screen")

  

  At the same time is German. In the middle of the first picture it just says: "Connected to the PC" - but my PC can't find the mobile because it is only on emergency mode.

  Second picture only says: "Please enter password".

  I have absolutely no idea what to do.

  Well, finally I got it: he wanted the 'old' or better 'first' password I used for the AVG Anti - Theft Protection. Pretty happy I always knew he...

  Thanks for the support anyway

• Cannot, enter the BIOS with the F1 key.

  Hello

  I tried to install Mac OS X recently (10.7 Lion on Chameleon 2.1 RC1 16xx with iCloud patch), and the installer crashed. Now when I boot my ThinkPad I press ENTER to display the boot options. When I click on F1 or F12 ThinkPad not responding when I press enter or ESC, it will do what it must do.

  I've got "CMOS reset" error after restarting after the failure of the attempt to install Mac OS X. I know that sometimes, Mac is reset CMOS (I have a PC with Mac and it works well).

  I can boot Windows 7, but I can't the configuration of the BIOS.

  I had the supervisor password (I remember ), maybe that's the problem.

  djmati11,

  Sorry for my English.

  EDIT: I've got:

  ThinkPad Edge 13 (0217-2QG)
  Operating System: Windows 7 Home Premium
  i3-380UM(1.33GHz), 4 GB RAM, 320 GB 5400 RPM, LCD 13.3 in 1366 x 768 HD, graphics card Intel HD, Intel 802.11bgn wireless, Bluetooth, camera, 6 c Li-ion, Win7 Home Premium 64 1 Gb Ethernet, UltraNav

  @djmati11,.

  Try to hold the Fn then just press F1 and see if you can boot into the BIOS.

  JMT