HD will start another mbp, but not its own

Similar Questions

• T61 with MultiDrive will start from CD, but not DVD

  Hello.

  I have a little problem - I am installing Windows7 on my T61 (currently it is running Ubuntu) and I can't boot from the installation DVD.

  I changed the boot order and it will boot very happily on a CD - I tried to use the utility to update firmware of drive that comes as an ISO CD - motorcycle boots very happily and says my firmwqare to date.

  No chance with a (real) WIn7 install (32-bit) DVD, but - it debits for a while, then finally gave up on the MultiDrive and ends up booting from the HARD drive.

  Any thoughts?

  Thank you

  Youra.

  Looks like a damaged disk, or a bad drive. Try the drive in another computer and if possible, try replacing it with another drive on this computer.

  If she starts on a CDrom, it starts from a DVDrom, as long as the drive and the drive are good.

• When I click on Internet Explore (9). It will start to load, but then it just seems to stop loading. So I can't access the Internet at all the

  When I click on Internet Explore (9) to browse the Internet, it will start to load, but then it stops just loading. I have Internet connection that seems to work as I can access my emails with windows live. I have no idea why it will not load.

  Thank you

  So I get it open Internet Explorer and attempt to load the home page and stops without loading shows you a blank white page is that correct?

  If so, make sure that the address bar and try to type a web address there (bing.com for example)
  If I'm wrong and that Internet Explorer does not open
  Open the start menu and type internet and click Internet Explorer (no Addons)
  The void if these useful
  Open the start menu and type inetcpl.cpl press ENTER, go to the Advanced tab and press Reset.

• How can I transfer photos from my iPod touch 6th generation for my macbook pro WITHOUT using iCloud, please? It's simple with another camera but not the case, it seems, for the Apple iPod

  How can I transfer photos from my iPod touch 6th generation for my macbook pro WITHOUT using iCloud, please? It's simple with another camera but not the case, it seems, for the iPod Touch from Apple.

  Use import option from your Mac:

  Import photos and videos from your iPhone, iPad or iPod touch - Apple Support

• Satellite A50 will record on Dvd, but not on a CD - power calibration error

  My Satellite A50 will record on Dvd, but not on a cd. It happens with power calibration error after about 5% of the record.
  The drive used to save at all!

  --> Power calibration error is a mistake known to me.
  I've read on various sites several suggestions and comments and the power calibration error appear because the lens of the drive can not calibrate correctly.
  It is a hardware malfunction and unfortunately nothing :(

  You will need to replace the drive

• 100.0 Mbps, but not the acquisition of intellectual property

  100.0 Mbps, but not the acquisition of intellectual property

  Hello manicuredlawns,

  This sounds like the behavior of the specific virus. You have already run a full system scan with your anti-virus security software?
  You may need to do this in Mode without failure to a complete analysis of the system:
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true
  I suggest to choose Safe Mode with network on see if the network connection works differently.
  Also try a restore of the system in safe mode to see if it makes no progress:
  http://support.Microsoft.com/kb/304449

• Whenever I try to log on to the administrator account, it will start to connect, but immediately disconnected return.

  Original title: why my account automatically disconnect?

  I am running Windows Vista Home Premium.

  Whenever I try to log on to the administrator account, it will start to connect but then before he's even changed screens, immediately disconnect back.
  I can connect to it using safe and I ran Anti-malware, Microsoft Security Essentials and Advanced System Care and they have all come without any problem.
  Now, I guess I'm using an account with administrative privileges but different. I just need to open Windows Media Center, but every time I try, it says: I'm on the guest account. My machine won't let me create a new account, delete other accounts, or even to change the passwords. In addition, a random ASP.NET account appears and I can't remove it.
  I don't understand what I could do wrong. Any help is greatly appreciated.

  Hi Jorgomli,

  1. you receive messages or error codes when you try to connect?

  2. you remember to make changes to the computer before this problem?

  Step 1:

  Because you can connect to the account administrator in safe mode, you can try to create a new safe mode administrator account and check.

  Check out the link:

  Create a user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  Step 2:

  If still face problems, then you can try setting the default Administrator account and check if you can solve the problem.

  a. click the Start button

  (b) in the Start Menu, click all programs followed accessories

  c. in the menu accessories, right-click on command line option

  d. in the drop-down menu that appears, click on the "Run as Administrator" option

  e. If you have the User Account Control (UAC) enabled, you will be asked for permission before the opening of the command line. You simply press the button continue if you are the administrator or insert password etc.

  f. in the command prompt window, type the command net user administrator / Active: Yes and press ENTER.

  g. close the elevated command prompt.

  h. log (in the Start Menu) and you will see your new administrator integrated next to your current account.

  i. click the photo icon display built-in Administrator account and connect to it.

  If the problem is resolved, then you can create a new administrator account and check.

  You can try to create a new administrator account by following the link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  You can also try disabling the default Administrator account using the command

  NET user administrator / active: No.

  Hope this information is useful.

• How to fill one shape with another shape, but not of models

  Hello

  How to fill one shape with another shape, but not of models. Example of this poster

  

  put in a shape of the tree so that it looks like this:

  

  Select your type with a vector path, which is the subject

  Object > envelope distort > make with top object.

• Computer will display the text but not the graphics

  I have a computer that is running Windows 7 Pro 64 bit that will display the text, but will not be graphic print (what I get is several pages of garbled text and what looks like Morse code).

  The problem is the same with a HP Officejet Pro 6230 or an Officejet Pro 8100.

  The problem occurs if I am connected with a domain users account or the local administrator account.

  The problem occurs using the re-discovery of HP network port monitor or the standard TCP/IP port.

  Two other computers connected to the printer and also running Windows 7 Pro 64 bit, you do not have the problem.

  HP printing and doctor Scan didn't find any problem and is not the problem of printer Microsoft Fixit fix anything.

  I will try to assign another driver by following the instructions at:

  http://h30434.www3.HP.com/T5/printer-all-in-one-software-drivers/how-to-assign-alternate-print-drivers-in-different-versions/TD-p/1957011

  but I do not know what driver to use.

  This Technet article:

  http://blogs.technet.com/b/perfguru/archive/2008/08/06/print-spooler-crash-troubleshooting-steps.aspx

  suggests that a third-party port monitor may be to blame. I tried to remove the rediscovery of HP Network Monitor, but I get an error and I can't remove it. As far as I can tell, this is the third port only installed on the computer monitor.

  I have searched this forum, but could not find a similar problem that has a solution.

  What other information should I provide?

  Thank you!

  Jeffrey Pike

  Groton public library

  ELSA:

  Further investigation of this issue today, I learned that probably, printing problems don't were not due to the computer or printer, but a bad pass that the computer is plugged into. I ordered a new switch, and I hope that it will be the end of my troubles. Thank you for the help that is available to you.

  Jeffrey Pike

  Groton public library

• My office will connect to other wireless networks but not my own.

  original title: the internet disorder

  everything in my house is my internet running at home, but for some reason, my desktop connects to the internet outside but not my internet has the House that I don't know what to do?

  Hello

  I suggest to refer to this link and follow the instructions in the link below and check, if this can help:

  http://Windows.Microsoft.com/en-us/Windows/help/network-connection-problems-in-Windows?T1=Tab03

  It will be useful.

• HP8600 Server2003 shared printer will install in XP but not Win 7 profiles

  Printer is shared on a Windows Server 2003 box. The driver provided by the Web site does not work with Win 7 profiles, XP only. I found another issue even in the printer forum installation/configuration:here where a HP technician recommended to use the 990 c drivers. This solution did not work for me.

  The printer can be seen by areas of Win 7 and installed manually (only manually in sofar as to find the part and double click on the printer), but does not fill the devices section and printers automatically as it should.

  Errrmm... they are implemented this way to allow the server to manage the print queue. There is no working groups. It is on a domain.

  Often problems such as this could be solved through drivers HP Universal type but not in this case. I think we just return the printer and goes with those must have stable and drivers work.

• Model BDP-S350 will play the dvd but not a blu - ray disc

  So far has never had a problem with my blu - ray player.  The last time I used the player, I watched a dvd movie.  I tried t watch a disc blu - ray today and I kept getting the error message "cannot read disc - unknown.  I tried 5-6 different blu - ray discs.  I made sure that the firmware has been updated and I followed the troubleshooting guide.  Nothing has worked.  It will play DVDs but not blu - ray discs.  Does anyone have a solution?

  Hi jfniep!

  You mentioned that he doesn't play Blu - ray discs? Can I know the title of the Blu - ray disc movies? It's happening on all Blu - ray discs you include those who played before?

• Media Player will not just rcognise CD when I insert for check out? Had no prons in the past & the disc is clean! have you tried & afraid 6 another cd but not different

  Media Player won't extract more CDs?

  Hi davidyearsley,

  1. did you of recent changes on the computer?

  2. you receive a message when you insert the CD in the drive?

  3. you have any third-party DVD burning software installed on the computer?

  4. What is the version of Windows installed on the computer?

  Method 1

  Refer to the article below and run the Fixit tool available, check if it helps.

  If the Fixit tool fails, then try the manual steps, mentioned in the article below.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Method 2

  If the previous step fails, then check the status of the CD drive on the computer by using the Device Manager.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

  Open the Device Manager

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Device-Manager

   

  Also get the updated driver for the reader of the car manufacturer's website and check if it helps.

• Windows does not start. Cycles to start in safe mode page, will then try to restart on its own

  Windows XP tries to start to the top of butends to the page of type BACK questions on starting in safe mode, safe mode with command prompt, or start with the last successful boot parameters.  We cannot arrows upward or downward scrolling.  Attempts of the computer to boot itself every 30 seconds repeat the same cycle that ends again at the option of safe mode page.  I left the computer on during the night and he did this recycling all the night evry 30 seconds never really start Windows.  I shut down the computer and then reboot tapping F8 all the time or something to take advantage of some control and reset?  Thank you for your help.  Dave

  Hi Dave,.

  ·         You did changes to the computer before the show?

  Try the following.

  Method 1: Shut down the computer, remove non-essential external devices and restart the computer. Check to see if it boots fine.

  Method 2:

  Step 1: Try to start in last good known Configuration and see if you can start very well.

  How to start your computer by using last good known Windows XP Configuration

  Step 2: Start the computer in safe mode and check the number. Report of the results.

• How to remove a subfolder but not its content?

  Hello

  As you can see below, I have Test files by mistake as a subfolder of a folder of images; and it contains 119 182 images in the parent folder.

  Now, I don't need this subfolder. How can I get rid of him without losing the images. My feeling is that the simple deletion will do the trick. Am I wrong? But how?

  Is the same for the other Test files a little folder below. How to get rid of it--but this time, the folder and the images?

  Thank you very much.

  

  (a) I want to get rid of the subfolder of the Test file and save the images in the parent folder. How?

  Choose the subfolder Test file (as in your screen above clip), select all the 119 pictures [CTRL + A], drag the photos to the folder "June 16..." name, and then release the mouse from the mouse button. Note: It is necessary to start the operation drag photos by clicking on the mouse exactly in the middle of a thumbnail of the image. It does work if you click on a miniature grey edge.

  (b) I want to get rid of the test file 3 lines below and its images. How?

  If you want to keep images, do the same thing as in one) - drag to another folder.

  If you want to permanently remove the images from your computer first, select all images in the folder "Test_Files_LR", right click and choose "Delete Photos". You have TWO options - delete the catalog and remove the disc. You can then right-click on the folder and 'delete '.