After one minute of no activity my screen turns blue and I have to click back as a user. I want to prevent this.

Similar Questions

• Screen turns blue and restart Satellite C850D-11 q

  I bought a Satellite C850D-11 q runnings Windows 8 of Curry to the United Kingdom for my daughter just before Christmas - was a very good price £300 - however, she says that she will be surfing the internet and or do a variety of other tasks (no particular process does seem to be involved) and suddenly the screen turns blue and the computer will be closed and restart no reason apparent. He did at least 30 times per month.

  BSOD means that there is a hardware problem or software problem.
  The BSOD can be caused by high temperatures as well as problems of RAM.
  So it's not easy to say what is causing the BSOD.

  Make sure that this laptop is cooled properly.
  In addition, if the temperature is not the problem, try to recover the system using the recovery options described in the user manual and in the present document:

  + Windows 8 recovery & Repair +.
  http://APS2.toshiba-tro.de/KB0/TSB2A03ES0000R01.htm

• IdeaPad U430p - screen turned blue and only shows cursor

  I just bought my laptop today, there an i7-4500 processor with windows 8.1

  While I was installing norton the screen turned blue, but it was ok after a few minutes. But the screen turned blue even once, and my tasks stopped responsing Manager. She returned to normal after that I have signed in. Now it just turns blue for a few seconds from time to time and goes back to my desktop screen with all my shortcuts to the Center and my deleted background.

  I don't know if this is normal, hadvent used windows 8 before. Is could someone please tell me if I can do anything to fix it? Thank you >

  Please try to uninstall Norton to see if you still get the blue screen. You can try using Norton Removal Tool: http://www.norton.com/nrt

  If you get a blue screen after the removal of Norton, try update video drivers and see if that solves the problem. You can try to reinstall Norton after that.

  See you soon!

  Harry

  Norton support

• I have a problem with the screen turning blue and yellow.

  Original title: I'm about to crash?

  I work with an old computer of 10 years (WinXP) and recently, he has started only blue and yellow of the monitor display.  Is this an indication that I am about to plant?  This problem started when I used to try the Upgrade Advisor download Win7 Win7.  It is all too much or doesn't I accidentally deleted something that I would have kept?

  I look forward to a response.  Thank you

  If you want to run dell diagnostics from the link given, you need to install .net 4 extended (full) before you can run the diagnostics.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=17718

  After installation, there are about 9 updates of high priority you need to install microsoft updates.

• My laptop goes into power saving mode after one minute. Someone knows why?

  It's just started happening yesterday. I use a Toshiba laptop and out of nowhere, my PC goes in power saving mode after one minute when ALL my settings for this mode is 30 minutes. Does anyone know how to fix this?

  Hi MattLipkint,

  1. Did you the latest changes on the computer?
  2. When was the last time it was working fine?
  3. You have security software installed on the computer?

  Method 1

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  Method 2

  If the previous step fails then I would suggest that you update the display adapter drivers, basic input/output system (BIOS) and motherboard chipset drivers.

  Important: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

  How to solve the problems of hibernation and standby in Windows XP

  http://support.Microsoft.com/kb/907477

• Explorer Windows restarts after a minute arriving at log on screen or if I connect quickly the dialogue windows Explorer unhandled 0x00000000 in explorer.exe exception States: after repair of Windows XP running.

  Windows Explorer restarts after a minute arriving at log on screen or if I connect quickly the dialogue windows Explorer States of exception unhandled 0x00000000 in explorer.exe: 0CX0000005: reading location access violation) X 00000000 Code: 0XC0000005, flags: 0 x 00000000 after you run Windows XP repair. Repeated repair Windows now for the third time, repair works OK but always produces the result above!. Initially, ran SFC/scannow, he ran very well modified some files but has not fixed the problem. Now I can't run Sfc/scannow in administrator mode in a repair console or environment (cmd) receive error "Windows file protection could not initialize the scanning of protected files. The specific error code is 0X000006ba [the RPC server is unavailable]. Can not access services through msconfig in safe mode, no available tab. When I click on Control Panel in safe mode, I get an error but control then window opens I can access to the services window, but as soon as I click on any service Windows Explorer plunges a black screen with only the white inscription SafeMode visible in each of the corners. When I try to access the sound module in safe mode, I have an error message and he abandoned me in safe mode desktop. Have no tab restore field in system restore to create a system restore point. In safe mode do not log off, restart or shut down (only windows explore drops leaving the black screen with text in each corner indicating the computer in safe mode, no recorded parameters.) Tried to run scanreg.exe & scanregw.exe run, cmd, mode console repair but command is unrecognized. When I tried to run all these commands using BartePe, the States of error cannot access raw disk. In safe mode, I can access the first level for example my computer folder, but when I double click on the c drive or any other drive nothing happens!

  Access msconfig, run, cmd, Device Manager, uninstall programs etc. in safe mode.

  I can easily re - install a new OS on the C partition, but I like challenges! Is there anyone with the skill out there who can offer suggestions for this mother of all XP flaws? (apart from the installation of a new version of Win XP)

  Hi Semi_Tech,

  Step 1: Start the computer and use the Recovery Console to check for errors
  a. see to start the computer and use the Recovery Console
  b. at the command prompt, type chkdsk /f /r and press to enter.

  Step 2: We recommend that you check if the RPC Server service is running.
  a. Click Start, click Run, type services.msc and click ok.
  b. in the list of services, double-click RPC Server service.
  c. change the startup type to automatic and click on the Start button.
  d. click ok to apply the changes.

  See if the steps mentioned by '- MainFrame -' can help you to:
  See windows SFC file protection could not run a scan of protected system files

  Step 3: Check if you can start the computer in safe mode
  a. see the description of the options course in Windows XP Startup Mode
  b. connection to the administrator user account and check if the problem persists.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• load is0 10 to my iidown phone 6 s after finsh my phone restarts on the screen appear (photo and conncet quail itunes) iconncet my phon with PC and open my itunes

  ADOS iso 10 to my iidown phone 6 s after finsh my phone restarts on the screen appear (photo and conncet quail itunes) iconncet my phon with PC and open my itunes

  and stil again

  Take a look at these articles:

  Solve the iOS update and restore error in iTunes - Apple Support

  Get help with iOS update or restore errors - Apple Support

• 11 - e010nr after the signature on the photo and a few icons appear and then the screen turns white and reappears

  Laptop TouchSmart 11, e010nr 11, windows 8, no error message. I can Ctrl/alt/del and obtain the lock... the Task Manager screen. This screen works but nothing else

  Hi danny61,

  Just to clarify , when your screen turns white and reappears, the icons reappear also? and do you not see that set the desktop background or the taskbar? that it could be as simple as restarting the Explorer process in the Task Manager.

  If you can update me if I can see how I can help

• Screen turns black and does not return. One stop forced

  When I leave my computer for a while, the screen turns black and does not return when I press 'enter', or any other key.  I do a forced shutdown (turn off with the power button).  Can I get, and the "incorrect closing" message when I turn on computer. I think that it is a problem of Hibernate.  Any ideas?.
  MMM

  Original title: hibernation problem?

  What happens if you press Ctrl + SHIFT + ESC when you want to get out of hibernation?

  You use a wireless keyboard and mouse with a transponder. What happens if you press the button on the transponder?

• T420 screen turns off and turn it back on when the AC adapter / CC is attached or removed

  You are working on your machine, staring at the screen and the power failure... Yes - something quite common in these parts of the world... but no worries, the screen darkens slightly according to the diet plan and you hardly notice. Then, when the backup generator kicks in and the power is activated again, the brightness of the screen is back to your usual setting. Meanwhile, it is not a gene. Right?

  Well, that's what should happen... except that most of the time it doesn't work! Most of the time, the screen turns off and then turns on remove the main power and reinstall it. Note that this never happened once with T61 or T41p.

  Initially, I assumed it was because I had an external monitor attached... maybe it was to reconfigure something there? But then, it happens even without the external monitor. Then, I tried looking for the video driver updates... maybe this bug had been fixed to the... no luck there.

  So, finally, after having known this more often now, I thought I would get feedback from you all. Any advice?

  Check the Intel Media profile with the power settings. If a battery is "Maximum economy" mode then it should be in Exchange for 50 Hz to 60 Hz... Change it to balance or maximum Performance and see if its ever-changing from 50 Hz to 60 Hz...

  If all else fails, try updating the video driver, it might be a bug in the previous version of the driver.

  See this KB for more information

  http://Forum.Lenovo.com/T5/T400-T500-and-newer-T-series/T420s-screen-refresh-rate-drop-to-50Hz-when-...

• TE2000 - screen turns on and off quickly

  Hi all

  My TE2000 was wrong flashing. The screen turns on and off quickly, sometimes every second quarter or so, it seems, so bad that I can hardly read the display. It's like someone is pressing the lid-switch very quickly.

  It happens sporadically. Sometimes it won't happen for a few minutes. Other times it flashes just once or twice, and still other times, it becomes unbearable and continues for minutes at a time.

  Someone has an idea of what could be the cause? I looked into the screens of replacement on e - bay and cannot find a lot...

  Hello

  Have you tried to check if this problem also appears on external monitor?
  Not? Try to do that! If it doesn't appear that on the screen TFT internal display then it s not a graphics chip malfunction but display or a failure of inverter FL.

  Looking for a second hand TFT screen?
  It seems that the laptop TE2000 supports a 14.1 "1024 x 768 TFT color screen
  Therefore, you can use each view of each laptop that supports the 14.1 screen size

  Good luck

• Windows Vista crashes, I get the 'Blue screen of Death' and I have to restart. Different errors each time it crashes.

  Windows Vista crashes, I get the 'Blue screen of Death' and I have to restart. Different errors each time it crashes. I tried to reinstall vista without success of the problem being fixed

  Hello

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------
  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  Displays information on all the "crash" of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• My account closes every 5 minutes and I have to click on my icon of the user to return to where I was.

  If I'm not actively on a screen (internet package or application), the computer account is closed.  My user icon appears and I have to click on it to return to the last page I was on. Where can I go to set the time that account remains open?

  Right-click any space on the desktop, choose Customize from the context menu. In the window that opens, click "Screen saver" at the bottom right and in the next window, remove the check mark from the box "in»the logon screen curriculum vitae Click apply and then click OK to save the change.

  OR_Go in Control Panel, open "Appearance and personalization", next click "Personalization" open the "Screen Saver" link at the bottom right and in the window that opens, uncheck the box in the box next to "in»the logon screen curriculum vitae Click apply and then click OK to save the change.

• Print my pdf files is no longer. After pressing PRINT the 'Print to File' window pops up and I have to press SAVE under to go to the next step. Once the pdf file is saved it is therefore more a pdf but a PRN file. When I try to print the PRN file an error

  Print my pdf files is no longer. After pressing PRINT the 'Print to File' window pops up and I have to press SAVE under to go to the next step. Once the pdf file is saved it is therefore more a pdf but a PRN file. An error message appears when I try to print the PRN file. I need to be able to print my original pdf files. Please notify.

  Looks like you somehow accidentally active the option print to file in the Advanced Options print dialogue. Uncheck that and this problem should go away.

  -Dov

• I a s 6 more and when using the phone, if my face touches the screen it clicks on the logout button and the phone hangs up the call. Is it possible to prevent this without holding the phone away from my face when calling?

  I a s 6 more and when using the phone, if my face touches the screen it clicks on the logout button and the phone hangs up the call. Is it possible to prevent this without holding the phone away from my face when calling?

  iPhones have a proximity sensor which is supposed to automatically turn off the screen when you hold it in your face. If this is not the case you can take the phone and have it checked.