After reboot, vista with a black screen boot

Similar Questions

• Windows Vista starts with a black screen with the mouse cursor

  Hello

  I bought a new Toshiba laptop with OS Windows Vista from Best Buy. At time of purchse that Best Buy does not give me the Vista OS software, they said that the operating system is already installed in the laptop.

  Now, after a year, I have problems with the laptop. The Vista starts with a black screen with a mouse cursor. Before writing this issue, I searched some tips to solve the problem as

  (1) by pressing F8 while the computer is on and select it the option "last good known Configuration (Advanced) option." but it didn't work.

  (2) by pressing F8 when the computer is turned on, then turn on the option 'System repair Option', it did not work.

  (3) by pressing F8 when the computer is turned on, and then select the option "" safe mode / Normal mode option "Unfortunately she also did not work."

  Could you get it someone please let me know how I can solve this problem.

  Thanks in advance

  If Safe Mode does not and you do not have a Vista DVD from Microsoft, do a repair disc to do a startup repair, etc.:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to make the recovery disk/s since the Partition of recovery in case of hard drive failure or System Crash, when you're up a new drunning.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• Intermittently, he goes down with a black screen provides the following information: Boot from CD

  I have a Dell Inspiron 530 running with Windows Vista.  Intermittently, he falls down with a black screen provides the following information:

  Boot from CD

  Client MAC addr: 00 ID 09 88 CE 06

  GUID FFFFFFFF FFFF FFFF FFFF FFFFFFFFFFFF DHCP *.

  PXE - E53: no boot file received

  PXE - M0F leaving Intel Boot Agent

  No available boot device - retype press to try

  To the point where I have indicated the asterisk above, it has a slash which rotates in a circular motion.

  My thought is that it's either the Windows code is corrupted or is a hardware failure.  While I am not positive, I feel that it occurs when Internet Explorer is used.   System Restore is not enabled on this computer, so this isn't an option.  Can someone help me understand this means and how I could fix this?  I know that will later Windows version can solve it, but this isn't the answer I'm looking for.  Thank you

  Attempt to initialize the network is not a 'possible', it is certain that your PC is doing exactly this depending on your BIOS settings. In addition, she tries the network initialization after already trying to start on an optical disc. The two attempts at device boot doesn't have, in all likelihood after having already failed the boot from the hard drive. There is no message to indicate than an attempt to boot to the hard drive, or he leaves the screen too fast to see you or you did not save it in your original post.

  My advice on the diagnosis is based on the studied the real model of your PC, not generic advice for all Dell PC with Vista installed.

  1. Your computer has already finished POST (Power O n Self TEST) otherwise you wouldn't see any attempt to start at all.
  2. You've already provided specific error messages.
  3. I have already advised the best and most approriate diagnostics for your PC.
  4. Your PC will not start in any mode if it becomes a default 'hard', rather than the intermittent fault means your original message. Start in any mode, you can and make a backup as soon as possible.
  5. Unless these recent changes include adjustments to the BIOS settings, they are irrelevant, that he is a boot failure which can be caused by anything done under Vista.
  6. Removing the external devices is never a bad step of troubleshooting if you encounter problems. I doubt it will help in this instance, but it will not hurt to try, especially if they are peripheral bootable.
  7. Startup Repair will not solve a hardware problem (by far the most likley scenario).
  8. System Restore is not usable unless you can actually start to Vista and it's never going to treat problems of material.
  9. IMO, this is not a software issue. See also point 4.
  10. If you have a hard drive failure, it is not recommended to try to reinstall the operating system. First of all prove that the hard drive is OK as advised before trying to re-setup. In addition, if you can, back up your data before reinstalling the operating system. In all likelihood, that's what you have to do but for a hard drive replacement.

  I repeat that a failing or failed hard drive is the most likely scenario. Other more distant possibilities include

  • A failed or failing disk controller (almost certainly on the motherboard)
  • Boot from the hard drive is disabled in the BIOS (highly unlikely if this anomaly is intermittent)
  • Some sort of weird for the failure of the BIOS
  • Option 3 mentioned in the previous post (unlikely unless your PC has been internally inspected/modified or subject to vibration displacement/hitting more/remove etc..)

• Vista 64-bit Black Screen of Death, with just a mobile available slider, the system does not start in safe mode.

  My system worked properly on 25 April and then something happened and now the machine comes back with "Start menu options" but will not start in one of the listed options, modes result in the same outcome.  System also starts on the Vista CD.

  System begins to boot normally, shows the tracer Green Windows at the bottom of the screen, then the mouse pointer appears and moves but the rest of the screen remains black.

  That's it, that's all what he will do.  I checked the settings of the computer and ran the diagnostic tests available and everything seems to go fine and passes all the tests.

  I worked on my own computers for over 20 years and never been stumped before, but I must say this is a first, and I have no idea what to try to do it now.

  Help or direction is appreciated.

  original title: Vista 64-bit Black Screen of Death, with just a mobile available slider, the system does not start in safe mode.

  See if there is a way to tecover clean your data before doing a restore to conditions of factory that will wipe the drive of all.  You can use Knoppix http://www.knopper.net/knoppix/index-en.html with a good ISO as Copier: http://isorecorder.alexfeinman.com/isorecorder.htm as well as a blank CD (which you will need to do on another computer).  Starting on this disc and lla should give you enough access to the system (if you do not have any other means) to backup your important data.

  So since you seem to have no other alernatives, you can try retoring the original factory computer options. However, if it is a hardware problem as could very well be the case, you can still encounter problems after even this drastic step.  Then you will need to consider in a reputable computer repair shop (NOT Geek Squad or or a any of these big store centers) or maybe even go back to the manufacturer for repair.   Check out several options and compare the costs, quality and guaranteed and then make your best decision.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Invalid product key, left my computer with a black screen and a cursor of the mouse on the boot.

  A few days ago, I tried to upgrade Windows 7 Home Premium (64 bit) to Windows 10 using the free update. Installation hung at 84% for 2 hours, then restarted, was unable to recover the installation and then could not get back to Win 7. This left us with a black screen and a cursor of the mouse on the boot. The computer would remain in this State for about 10 minutes and then reboot and repeat.

  Fortunately, or so I thought, I had a few CD Windows installation backup from the back to the era of digital river. So I thought I'd install fresh on my empty partition, copy my files and data, and then format the partition with the installation broken on.

  I did, but now he tells me that my product key is not valid and cannot be activated. The product key came on a real label on the PC when we bought it.

  The key is for X 16-96072. I installed X 17-58997 (Windows 7 Home Premium x 64 with SP1 (u)). I don't know what is the problem with the key? Should I have installed without the (u)?

  One key 25 digits grouped in 5 sequences of 5 characters not X 17-58997.

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the diagnostic report produced by the MGADiag tool (download and save to the desktop -http://go.microsoft.com/fwlink/?linkid=52012 )
  Once downloaded, run the tool.
  Click on the button continue, after a short time, continue button will change to a copy button.
  Click the copy button in the tool (ignore the error at this stage) and then paste (with r-click and paste or Ctrl + V) in your message.

• Windows XP starts with a black screen and hangs for two minutes before the end of the boot process.

  Original title: Windows xp slow at startup delayed to the office after you download the updated April 8,2011

  First time after updating, would start then black screen can see the cursor then took 20 minutes before Office input... now does the same thing but just a few minutes. What happens all started after the recent update April 8... something about a NET update? any IDE how to fix?

  Hi kaeli,.

  ·         Have you checked the problem in safe mode?

  Step 1: Try to start in safe mode to see if you can start fine.

  Step 2: If he is able to start fine then try try perform a clean boot to normal mode to check whether a third-party program is causing the problem.

  How to configure Windows XP to start in a "clean boot" State

  You can also read the following article to resolve the problems on the issue.

  Perform a clean boot to determine if background programs interfere with your game or program.

  Note: Make sure that you put the computer to a Normal startup once you are finished.

  See also:

  Computer stops responding with a black screen when you start Windows XP

• After the updates of windows, the computer stops responding with a black screen at startup of the system

  Original title: Windows XP does not start after the update, no error message

  Has made no changes to the system, but the last thing that happened was an update of Windows security on stop.

  Now when I boot, the BIOS p.o.s.t. shows good HDs, good DVD-Rom, RAM, but Windows never starts, goes just a black screen, HDs are not accessed.

  -F8 does nothing, can't use the last known good Config or Mode safe

  -Change boot order in the BIOS to boot from the Windows XP DVD, hoping to get the recovery console, but the same thing: black screen, no attempt to spin-up DVD or HDs.

  -Removal of mobo battery to reset the CMOS, no joy.

  -Checked and re checked all connections inside.

  -Stripped devices and added one at a time, no joy.

  -Traded-in an old video card in case it was difficult to generate the higher res gfx, no joy.

  I was construction/upgrade / repair my own PC for 3 decades and can usually solve the problem and fix it myself, but this one me completely baffled.

  Any suggestions?

  Hi Cougarific,

  We recommend that you repair your Windows installation in according to method 2 of this article and check the result.
  See computer stops responding with a black screen when you start Windows XP
  

  Note: When you perform a repair installation, it restores the current installation of Windows XP to the version on the installation DVD. This requires you to reinstall all updates that do not appear in this version of Windows XP disc.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I try to reboot my laptop (toshiba Windows Vista) displays a black screen and now I can not it reboot. It says bootmgr missing. What should I do to restart?

  Can someone help me please! When I try to reboot my laptop (toshiba Windows Vista) displays a black screen and now I can not restart. It says systeminst9.wnm is missing. What should I do I restart yo?

  Hi Ashutosh,

   
  You did changes to the computer before the show?
   
  This error indicates that the boot sector is corrupted or missing.
   
  I suggest for the link and follow the steps in the article:
  Windows error message «Bootmgr is missing Press Ctrl + Alt + Delete to restart»
  http://support.Microsoft.com/kb/2622803
   
  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.
   
  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• Vista Home Premium, black screen after my login and my password entry

  Hi all

  A month ago I bought a new Dell Inspiron 15 comes pre-installed with Vista Home Premium. Like many others I am now a problem with a "black screen" that hang up the machine after my login and my password. "

  When I start the machine it seems to load normally I do it at the login screen, I select my account (admin) and enter my password. The windows logo appears, and then a status bar starts indicating that the OS is laoding. Shortly after that I get a black screen on (which means that the display is on but list black). I tried to start safe mode, but I get the black screen it so.

  Like others the machine was working great until this point. I was using AVG Free edition and I am always very careful on viruses.

  Can someone help me?

  Thank you

  Travis

  Kindly stop posting the same question.

  Questions are answered as soon as possible.

  http://support.Dell.com/

  As it is only a monthe old, contact Dell Support as soon as POSSIBLE.

  It is under warranty, for all hardware and software problems.

  Report, in case of future problems.

  See you soon. Mick Murphy - Microsoft partner

• Computer stops responding with a black screen when you start Windows Vista

  Computer ceases to respond with a black screen when I run Vista, this happen right after the installation of updates. original title: computer stops responding with a black screen when you start Windows XP__

  If you think that Windows updates are loaded:

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  MS - MVP - Elephant Boy computers - don't panic!

• G10 - 133 started booting with a black screen

  Hello

  I was wondering if anyone could shed some light on a problem I have.
  About 3 months ago my G10 starts with a black screen startup. I can hear the sound and all qosmio logo. Just impossible to see anything. So, I pushed FN + F5 and it would show the windows xp loading screen. But when it is started in windows. It would be a very low resolution display. So I have to change or push the tv out button twice and it would auto resets.
  I was in the bios and changed the beginning of the analogue lcd + rgb display and which will show that during the boot process, but continues to be carried out in low resolution windows.
  And if I plug in an external monitor, the two, they just empty.
  I tried to re-complete installs, qosmio Player re - install. NVIDIA driver, hotkey utility, display change. But still nowt.

  Someone at - it had similar problems? And if yes, could you remedy this?

  Yes, I had this earlier on my G10 and this was the beginning of more serious problems. The machine has started to behave more strangely, and it has gotten worse over time, insofar as it would lock up when you watch DVDs and qosmioplayer software has stopped working completely.

  I don't know if you have the same problem, but I took for Toshiba technicians and machine ended up going back to them for an overhaul of the system board. = problem solved.

  Oddly enough, one of my friends has had exactly the same problem and went through the same process to return the machine; I don't know if it is a problem that affects all G10s!

• After loging in I end up with a black screen and mouse

  whenever I turn on my computer it starts as normal until it come to the login screen, I log in and the welcome screen come but after that I end up with a black screen and a mouse. I tried to stop programs from starting when windows does and have even deleted some programs that I thought that maybe boging my computer down when starting upwards. I ran out of other things to do.

  Thank you:

  Trevor

  I think the problem could have solved its auto but thatks for assistance. If it come back I'll for shure back to you.

  Thank you

  Trevor

• Need help with windows defender. all my files folders pictures everythiing disappeared and I find myself with this black screen and it is not all good: o)

  Need help with windows defender. all my files folders pictures everythiing disappeared and I find myself with this black screen and it is not all good: o)

  I don't know why vista windows no longer charge, or when the files and folders disappeared

  How Windows Defender is on this problem?

  Follow these steps to try to solve your problems of boot.

   

   

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• Err2Err3 error after recovering Vista with recovery disk.

  Looking for help please.

  I have a laptop hp DV2410us. My hard drive of 160 GB is just came out, so I put a 320 GB drive at 7200 RPM and 2 new cards memory sticks for a total of 2 GB. The same memory type more then it came with. I ordered the hp recovery disk. everything seems to load ok, but it keeps restarting after it enters windows and all programs has finished start up. As norton and windows sidebar. There is a small popped up tht box for perhaps a second down on the menu bar tht has been one of the downloaders of system files. Its called fbi Director of mistletoe, I think tht was the name. I tried to click on it until windows stops and looks like it is trying to pull up a screen but closes and the system stops.

  I'll check back every hour approximately. And let me know if you need more information about the system.

  Update: I have advanced and tried to reinstall vista with the recovery disk. It's always the same thing with restarts it. But now it came with a black screen with the word err2err3 on the upper left of the screen. I even restarted the thing several times and tried to use f11.

  Could I have to change something on the new hard drive?

  Help, please...

  Looking for help please.

  I have a laptop hp DV2410us. My hard drive of 160 GB is just came out, so I put a 320 GB drive at 7200 RPM and 2 new cards memory sticks for a total of 2 GB. The same memory type more then it came with. I ordered the hp recovery disk. everything seems to load ok, but it keeps restarting after it enters windows and all programs has finished start up. As norton and windows sidebar. There is a small popped up tht box for perhaps a second down on the menu bar tht has been one of the downloaders of system files. Its called fbi Director of mistletoe, I think tht was the name. I tried to click on it until windows stops and looks like it is trying to pull up a screen but closes and the system stops.

  I'll check back every hour approximately. And let me know if you need more information about the system.

  Update: I have advanced and tried to reinstall vista with the recovery disk. It's always the same thing with restarts it. But now it came with a black screen with the word err2err3 on the upper left of the screen. I even restarted the thing several times and tried to use f11.

  Could I have to change something on the new hard drive?

  Help, please...

  Hey IBdarts

  problem with the hp recovery process, you will need to contact hp direct

  It's their recovery process not microsofts

  I suggest that you tell them that you have installed a replacement hard drive that you have bought yourself

  http://welcome.HP.com/country/us/en/contact_us.html

  Walter, the time zone traveller

• Error message: Windows could not open possibly due to a hardware or software upgrade with a black screen and white on Windows XP starts.

  Original title: suddenly Windows XP does not open

  After using the computer someday, he would not start the next time I lit. Windows tried to start but failed and went to a black and white screen saying windows could not open possibly due to a hardware or software upgrade and invites me to try opening windows normally, safe mode, using the last well-known congig, etc... Every choice has ended up doing the same thing, windows tries to start and end up back in the black and white screen.

  Hi Brian,.

  1. you receive messages or error codes?

  2. did you of recent changes on the system?

  You can read the following article and check if it helps.

  Computer stops responding with a black screen when you start Windows XP

  Black screen on startup

  Hope this information is useful.