After starting windows 7 Notepad opens titled GfxCUIServiceInstall

Similar Questions

• Latitude E7440 display goes black / white after "starting Windows."

  I suspect that he is an out-of-the-box issue (like the power button lights, either), but maybe I'm missing something... This particular unit fired upward, as planned and took our standard image. Somewhere along the way (probably during one of its reboots), I noticed that the screen is out. Turn down and the back didn't solve it, or don't have reset the BIOS. Dell diags run without problem and I can start Windows in Mode safe... but whenever I start Windows normally, it removes after "Starting Windows" flashes by.

  AARRGGHH! I'm kicking myself. It was something I discovered some time ago and since then I forgot... I had stacked them! I have closed an E7440, placed another on top of it and proceeded to the image of this second unit. At some point, I must have changed it so slightly... put it right above all that the devil is in the cover of the display of the unit of the first! (A magnetic field, is my guess). And "in white" is the second display unit... hit the light of the power button, and as a bonus. It worked as planned, when I moved this unit to another place, in order to tap into a flat HDMI. And it is blanked, as soon as I put back it on top of the first E7440. Mystery solved.

• Start window began to open randomly for no reason at all.

  I'm about 2 weeks ago and operating Windows 7 the start window began to open randomly for no reason at all. It remains open, then closes or it will close when I click on the screen what ever is open, BUT the start window could then reopen immediately.

  Everyone knows about it and how to stop. Should I go back to a restore point or is there another solution? Thank you!

  OT:

  Start window

  You use the system restore immediately and before you lose all the restore points good!

• Tecra S5 - Black display after starting windows XP

  Hello
  I had problems with the display driver last month after the new update, the driver of the original view was gone.
  After some restorations of older versions the screen worked, but not with the original display driver. I was Born the driver on the laptop and the character to install this new, but something is wrong.
  When I start the PC, the bios password is ask, filled, windows XP is started and the screen is dark without courier. Look of the screen reader does not start automatically to start Windows XP.

  What can I do? Only option work you the PC recovery CD?

  You can start a computer laptop properly using SafeMode (F8 at startup) option?

  What can you do?
  In my opinion, you have only two options: to install the Toshiba display driver or install the new OS by using the original recovery disk (radical option but it is better).

• Window remains white screen after starting windows screen. the system hangs after Mup.sys on safe mode

  The title pretty much everything said.

  The problem occurred on a fault that Dell Vostro 2510 with the additional option should only do the downgrade of Win Xp (from Vista).  As noted, on normal startup, the system will remain in a blank screen after the Windows Xp "loading" screen.  And on safe mode, it will join Mup.sys and then hang there.

  The closest thing that I got from a web search was a thread in forum saying that the official info from Microsoft was that it was a question of Win Xp/motherboard (http://www.hardwareanalysis.com/content/topic/31874/?o=40 halfway to a post by Bobb Fwed).  The poster provided no link, so I don't know how official his info was really.

  Thank you
  -joe

  Contact the Dell Support under conditions of your warranty or Service contract. I suspect that you look at a clean install of Windows here. Good luck! ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• A few minutes after starting windows, the laptop crashes

  I use a Toshiba laptop model: ppm81e, with windows Vista professional.
  Last night it was working fine, but when I woke up this morning, I found that the notebook is turned off. Apparently, for three hours, there was no electricity in our region and which caused the closing down.

  When I turn on the laptop, all load pretty normal as before. However, 4 to 7 minutes after the start, computer crashes laptop all at once. I can't disconnect, I can't restart, I can not load the Task Manager, and same taskbar are locked. At the beginning of the process hangs, I can switch between the windows using Alt + Tab but it is useless and will not help anything...

  I tried to use system restore, but unfortunately it says there is no restore point previous (I guess it is disabled).
  So I tried to use the repair using Recovery DVD that I did the first time I turned on the laptop.

  So, I inserted the recovery disc 1 DVD and boot from the DVD.
  Now he's stuck in a scene where says:
  ' Waiting for ODD vacancies...
  STRANGE drive f: loan.
  Check for support in the F: drive... »

  And it is about 30 to 40 minutes, that's all there is...

  Here is the screenshot:
  Screenshot 1
  Screenshot 2

  I don't know why the laptop is suspended without no reason that I can think of and I don't know how to get out of this mess, especially when my last shot (DVD release) adds another problem to the equation, instead of solving a.

  Please guide me.

  Hi Jean did.

  I suggest that you contact Toshiba support for help with the recovery process.

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  If you are able to solve the problem of recovery process and the laptop still crashes at startup, then it is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• After Reinstalling windows 7 stopped opening PSD files.

  After Reinstalling windows 7 has stopped opening some files PSD files. I try to open them with Photoshop version 6, it does not work. I tried to open them on the laptop, same garbage. Tell me what is the problem. And how to fix it. Thank you.

  Maybe these files have been corrupted. I can't say how it happened, but it is quite possible. And the files are no longer open, immediately after reinstalling windows? Or not?

  If so, it is very rare in my opinion. You are very unlucky. Try to reinstall photoshop. Then check that these files have been opened or not. In the opposite case. Then the only solution is a special software. I would use this program http://www.photoshop.recoverytoolbox.com/ on your site

  (it is not free but is very good and is not expensive. But in the future you will be immune to such situations. )

  So you can learn more about your problem here: http://www.filerepairforum.com/forum/adobe/adobe-aa/photoshop/207-can-t-open-a-psd-file-th rough-photoshop

• BSOD on all options after starting windows updates running.

  I ran the windows updates last night I shut down my computer.  I remember it being about 12 updates to run.

  Windows Vista, 32-bit

  This morning, I rebooted my computer and during the loading sequence, updates continue (the non-graphical part) and then I got a BSOD.  I tried to run all the security modes and got the same message.

  I ran repair my system disk and got the message that he could not repair the version of windows.  I tried a system restore, but it said I had no save points.

  Is there a way to manually tell it that updates have been an uninstall from the reapir vista disk command prompt?

  The specific the BSOD error code is
  0x0000007E (0xC0000005, 0x8264CB56, 0x803998CC, 0x803995C8)

  Any help which is not one of these answers canned that has a bunch of stuff I can't do since I can't on something else that the ERD would be useful.
  Thank you!

  In the end I solved it me - so if someone runs into similar codes - here is the summary:

  I ran Windows Update.
  On reboot the part of the update that runs in non-graphical mode full - then crashed by the computer.
  I got BSOD screens whenever I tried to boot in any mode.
  The specific error code is 0x0000007E (0xC0000005, 0x8264CB56, 0x803998CC, 0x803995C8)
  I tried the repair disk installation process - which could not find anything.
  I couldn't do a system restore point, because they were all gone.
  I called Microsoft - they were very nice, but their only solution was to re - install which was not possible for me.
  I downloaded and created a boot cd on another computer that could run antivirus software.
  The disc has been call BootCD Secured2k - there is a forum on the Mcafee site about this.
  I used it and found a Patched - atapi.sys trojan that he removed from the case.
  (Reading between the lines - this thing has been disrupted by the Microsoft Update that caused the mess)
  Then I got a new problem starting with the error code: 0x0000007b 0x80399bb0
  Same problem of being unable to boot in any mode.
  Same problem of being useless installation disc repair.
  After leaving it for a few hours, it occurred to me that perhaps when atapi.sys, that Trojan has been deleted the file was so.
  I connected the command line available from the installation disc advanced repair options.
  ATAPI.sys had indeed disappeared.
  I used the X:\windows\system32\drivers\atapi.sys and copied on my C:\Windows\system32\drivers.
  And presto! -my windows starts with happiness and everything seemed to work.
  (Why can't notice of repair of microsoft one missing disk or messed up file atapi.sys?)

  Unfortunately a few days later I noticed the Windows updates not working and I couldn't go even this part of the site.
  I tried everything I could think of and failed.
  So I called Mircorosoft again.
  We spent an hour on the phone and they found the problem this time!
  I used OpenDNS as my DNS provider for performance of problems caused by Time Warner.
  For some reason any OpenDNS blocking any attempt on my end to reach the Microsoft Update sites.
  I went from Microsoft recommended DNS and my computer was happy again.
  Everything has been happy since.

  And just to prove that I learned my lesson - I bought Norton Ghost and tries to configure full backups regular since the system restore point says that it don't work for me (I have a vista upgrade a XP Home machine on a FAT file system)

  So:
  Secured2K bootable anti-virus CD (and you can run other analyses of viruses such as PA recommended wear)
  If ATAPI. SYS is removed or bad - I copied it from the disc command prompt install.
  If you Microsoft updates stop working and you can't reach their windowsupdate.microsoft.com - check your DNS.

• After starting Windows Vista Recovery dvd 64-bit, the files are loaded on my laptop, however after the loading screen are replaced by a black screen and the white slider.

  Hi all

  I have my laptop startup problems, and after you use the Windows Vista Recovery dvd(64 bit), I get a black screen with a white cursor. If I try to start the system in safe mode, I get an error message "windows/system32/ntoskrnl.exe is missing or damaged. Because I can't run the recovery dvd, I'm a bit stuck. Any suggestions?

  Evan

  Hello

  If you have problems with the process of recovery of manufacturers, contact the manufacturer

  It's their recovery process not microsofts

• Keyboard does not not after starting windows until you restart

  I have to restart and restart Windows 7 to be able to use my keyboard model M IBM under Windows 7. Windows starts perfectly fine, except for the fact that I can't type. It works very well with my BIOS, the GNU GRUB and Ubuntu after a cold start. Someone knows what's the problem?

  Hi Mick,

  Thanks for the reply.

  Because the keyboard is very old, I doubt that there could be a problem with the drivers.

  I suggest to update the drivers for the keyboard and check.

  Please visit the link below to update the drivers.

  http://Windows.Microsoft.com/en-us/Windows/Update-driver-hardware-ISN

  If the steps above do not work I suggest you to change the keyboard because it is too old.

  Please get back to us if the problem persists.

• Pavilion A9Q88PA: Beep Long before you start window and sometimes repeated beep after starting windows without stop

  Recently, my laptop have long beeps after turning the power on before launching the window and the last ringtone for 5-10 minutes. Secondly, keyboard seems to have problem because without pressing the letters that he is out nonstop by itself. Touchpad not moving not too. able to surf on the net but unable to control the keyboard at all. If I press a letter, she repeats the letters nonstop. never had this problem before.
  I realize taking power was to change and have requested replacement. Is it because of the tis? BTW, my rate of hard disk performance is now 4.4.
  Please help advise. Thank you very much.

  Product model: A9Q88PA #AB4
  Product name: HP Pavilion g4-1322tx Notebook PC
  Serial number: 5CD15225B7

• No mouse after starting?

  wireless mouse work in bios, but not after starting windows, install new ones, can not install MB driver because no mouse

  Use a wired mouse to install the drivers, then go wireless.

  When you install a new operating system, it is always best to use the minimum accessories installed and the simplist ones.

• Why did after downloading Windows security updates that Windows Firewall starts immediately after opening?

  Why did after downloading Windows security updates that Windows Firewall starts immediately after the connection?   This is happening with my PC and netbook, I almost hesitate to download the safety of dates in the future

  Hello

  1. What is the security update article?
  2. are there any other security software installed on your computer?

  If you have any third-party security software installed on your computer, I suggest you to disable the security software and then check if it helps.

  Note : If you need to temporarily disable the security software, you should reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks

  See also:

  The firewall service Windows in Windows XP Service Pack 2, in the edition of Windows XP Professional x 64, Windows Server 2003 SP1 and x 64 of Windows Server 2003 versions may not start if the DCOM Process Launcher Service is disabled: http://support.microsoft.com/kb/892504

  Troubleshooting settings of Windows Firewall in Windows XP Service Pack 2 for advanced users: http://support.microsoft.com/kb/875357

• Error message: Windows could not open possibly due to a hardware or software upgrade with a black screen and white on Windows XP starts.

  Original title: suddenly Windows XP does not open

  After using the computer someday, he would not start the next time I lit. Windows tried to start but failed and went to a black and white screen saying windows could not open possibly due to a hardware or software upgrade and invites me to try opening windows normally, safe mode, using the last well-known congig, etc... Every choice has ended up doing the same thing, windows tries to start and end up back in the black and white screen.

  Hi Brian,.

  1. you receive messages or error codes?

  2. did you of recent changes on the system?

  You can read the following article and check if it helps.

  Computer stops responding with a black screen when you start Windows XP

  Black screen on startup

  Hope this information is useful.

• Got the error saying that unable to start Windows. Now, it freezes after loading Windows.

  Original title: Windows Recovery Error Question

  Earlier I was looking at my computer, running a virus because my computer scan playing strange earlier. Every time I start Windows, I would be spammed with windows titles 'open with... '. ». I managed to open the Task Manager and get rid of all of them, but my computer shifted significantly again. Whenever I close it and restart the same thing would happen. I opened my virus scanner and started running it. Of course, he had a virus.

  As I was waiting for the analysis at the end, my computer suddenly closed and restarted without any warning at all. It froze on the splash screen. To stop and restart my computer again, I received a message that says:

  "Unable to start Windows. A recent hardware or software change might be the cause. If Windows files have been damaged or misconfigured, Startup Repair can help diagnose and fix the problem. If the power was interrupted during startup, choose Start Windows normally. »

  I was given two options: Launch Startup Repair (recommended) and start Windows normally. When I select the Startup Repair tool, I am taken to a screen with a loading bar that says "Windows is loading files... ». After loading, the screen would freeze. If I try the other option, I am taken to the splash screen and it would freeze.

  Is it possible to fix this? Any help would be greatly appreciated.

  Hello

  I suggest to unplug an external device connected to the computer and then try to start the computer and check if it helps.

  Otherwise I suggest you to contact the computer manufacturer for help.