After that the computer is idle for a few minutes, you receive an error message. "Vtdispl display driver does not work properly, please restart the computer to solve the problem."

Similar Questions

• Internet connection disconnects after that I let it idle for a few minutes

  I have Internet Explorer and Windows 7, and after I have let any inactive site for a few minutes, I have to enter my password once again as if I'm starting for the first time.  After I entered my password for windows, it goes immediately to the site I've been on previously.  It started about 4 months ago, and I have no idea what caused it.

  Hi Marquette.

  To provide the proper resolution, that I would need more information on your side.

  1. this problem occurs only while browsing Internet?

  2. did you of recent changes on the computer before this problem?

  I suggest you to change the screen saver settings and check if it helps.

  a. right-click anywhere on your Windows 7 Desktop and select Customize from the context menu.

  b. in the customization window that opens, click on the screensaver icon in the lower right corner.

  c. in the screen saver settings , uncheck the check box labeled in curriculum vitae, the logon screen.
  d. click apply and then click OK.

  Hope this information helps. If you need additional help or information on Windows, I'll be happy to help you.

• Wireless stopped working, the error message says "this wireless does not work on this computer ' even if another computer at home has no problem with wireless services.

  My computer stopped working wireless, the error message says "this wireless does not work on this computer ' even if another computer at home has no problem with wireless services.  I've tried everything and my router is intact.  My Protection of Kaspersky flags are gone from green to red and says threats have been detected. What should I do to get back on the wireless.

  original title: Wireless not working not

  Hello

  1 have had any changes made on the computer before the show?

  2. what operating system is installed on the computer?

  Method 1:

  Check the link and try to run the troubleshooter to check if it helps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  Try to run Microsoft Safety Scanner for any malware or spyware infection and check if it helps.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• "the igxprd32 display driver has stopped working normally please restart your computer" on intel gma 3150

  "the igxprd32 display driver has stopped working normally please restart your computer" on intel gma 3150, especially when I run 3d games or install Skype 5 and start on this video than the above message appears please advise solution and oblidge. Thank you

  First of all, you're not telling the forum what version of Windows, edition and service pack level your system is running.  Please do.

  Secondly, there is no describe your system.  Tell us who makes your system and its model, if a packaged system.  If not packed, please tell us who manufactured your motherboard and model.  If your video card is another box and not originally shipped with the system, please tell us the manufacturer and model of the adapter.

  Finally and most importantly, please read 555375 Microsoft Knowledge base article, how to ask a question.

  Now, in general, unless your system has a card mother Intel®, you do not want to download an updated directly from Intel® driver.  If there is a system, you will want to download an update of the driver support from the manufacturer of your system model site.  If not packed, see web site for support of the manufacturer of the motherboard for your updated driver model.  If this isn't the case, a card mother Intel®, the reason for the not to load the Intel® GMA 3150 drivers from the web site Intel® is that there may be unhandled in the Inte® base drivers implementation changes.  Nor should download the drivers through Windows Update, except as a last resort.  If Windows Update contains an updated driver, check you motherboard of the system/website of the manufacturer for updates.  Be aware that some manufacturers/motherboard of the system (e.g. Dell) don't feel any economic incentive to keep the drivers/firmware to update if a motherboard system was abandoned.

  No member of this forum is omniscient!  Provide complete information leads directly to all the answers!

• "The Windows update service does not work. Please restart your computer.

  If I click on "Check for Updates", a dialog box appears:

  "The Windows update service does not work. Please restart your computer.

  I rebooted several times, but the same error.
  Help, please.
  Thanks in advance.

  This site will help you get the update of Windows running service

  http://pcsupport.about.com/od/Windows-8/a/Windows-Update-settings-Windows-8.htm

• Blocks - Spooler subsystem or the display driver did not work properly

  I have a Vista Home Premium OS. He crashes at least once a day and the State of boxes (approximately equal amounts) dialogue that the Spooler subsystem or the display driver did not work properly and that have been closed by the enforcement data system. Can you give me advice on how to fix these problems?

  Hello

  1 when was the last time, he did not work properly?

  2. the accident happens at random or when executing a particular task?

  3 did you a recent software or changes to the material on the computer?

  Method 1:

  I suggest you to go through the steps mentioned in the link and the Coachman. Run the automated FIXIT and check. You can also follow the other steps listed in the article.

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Check if the problem persists, if she does not follow the steps in method 2:

  Method 2:

  This problem may occur if a third-party printer driver or service affects the functionality of a newly installed printer.

  I also suggest you to follow the steps mentioned in the link and check.

  Do not operate the automated FIXIT. Follow the manual steps and check.

  You cannot print and you receive the error message "Spooler subsystem app has encountered a problem and needs to close."

  http://support.Microsoft.com/kb/810894/en-us

  (Also applies to Windows Vista)

  Method 3:

  You can also update the display drivers on the manufacturer's Web site or use the link below.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  See also:

  Pick up the pieces after a computer crash

  http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash

  Hope this helps and keep us informed if you need help.

• Windows can't open add printer. The local spooler service sprint does not work. Please restart the spooler or restart the machine.

  Hello world

  I have back Windows 10 to Windows 7 Home Premium as suggested previously and it worked fine. Then knit as well as the sound function keys, but I now have a problem with the printer. I have a Toshiba Satellite.

  I am trying to print and get the message "...". You must install a printer.

  I reinstalled my Epson WF-2630, but when I try to add a printer in devices and printers, I receive the message "Windows can't open add printer." The local spooler service sprint does not work. Please restart the spooler or restart the machine.

  Can someone help, please?

  Thank you very much

  WestAusShortie

  Hello West,

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the issue.

  This problem may occur if the print spooler service is not running.

  Please refer to the suggestions of John Rubdy replied on April 29, 2010 and check if that helps.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/Windows-cant-open-add-printer-the-local-print/41f98aad-3a9c-47A6-978b-7c20e3ce9e0b

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• I want to add a printer, but get the error message "print spooler service does not work."

  I can't print from my computer.  This has happened with no other visible defects on the computer or the printer.

  When I use the printer in case of problem, and hit the 'add printer' link, I get the error message "print spooler service is not."

  "I did a search on"print spooler"but got no result

  Duane

  Often, but not always, the symptoms you describe are caused by a corrupt print job stuck in the queue or a damaged printer driver.  However before you clean things up, on general principles, that you can download, install, update and run full scans with each of these two free programs:

  AntiMailware MalwareBytes
  SUPERAntiSpyware

  Do not operate the two scans simultaneously.  Each will take a long time, so start it and then go do something else for a while.

  Cleaning of printers

  NOTE: If after completing step has the print spooler is not always running after you launched the command "net start spooler", you will not be able to follow all the steps in "First Article".  Instead, go to the other link and download and get and use the utility 'cleanspl' such as described here.

  If the suggestions below do not resolve your problem, after back and don't forget to include the following information:

  • The version of Windows you have, including service pack (start > run > winver > OK)
  • The brand and model of printer you have (includes the manufacturer, model and model number, as in HP Deskjet 6800)
  • How the printer is connected to the computer (parallel, USB, network, wireless, etc.).
  • It happened just before this symptom started
  • What application antivirus you have and if your subscription is up to date and has been maintained continuously
  • The full text of the error messages related to printing, without paraphrasing

  
  

  A. Clean on print jobs pending

  • Open a command prompt window (start > run > cmd > OK)
  • Type the following in the black command prompt window, and then press ENTER after each line

  net stop spooler
  del/q '% windir%\system32\spool\PRINTERS\*.* '.
  net start spooler
  output

  B. clean the old printer drivers and install the latest drivers by using the directions in One Article.  If you have (or had) a Lexmark printer, follow the instructions on the following site before installing the new drivers, as explained in its first Article: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

• The Cam Driver does not work properly

  Hello my product no model is hp 15-r015tu and I download all drivers, but there are still my cam does not

  When the youcam driver install in my lappy there give me something error.then missing in driver pack

  My OS is win-7 ultimate 64-bit

  Hello @JACK_0301 ,

  Welcome to the HP Forums!

  I understand that the webcam on your HP Pavilion 15 laptop does not work.

  Please make sure that you use the following download to install the CyberLink YouCam software for your notebook: Cyberlink YouCam software.

  Can you please tell me if there is a version of the currently installed YouCam software and the webcam works in this software?

  Also, check in Device Manager for devices of imagery for any conflict with the webcam. It should display with no X,!, or? symbols on the appliance.

  You can also restore the laptop to before the show began. You can do this by tapping F11, while the laptop turns on to access the HP Recovery Manager and selecting the restore option.

  Let me know if it works!

• Display driver does not work for Satellite L750D

  Hi Admin, how are you?

  laptop: Satellite L750D/050 PSK36A-050011
  Video card:
  Dual AMD Radeon 6480 G + AMD Radeon HD 6470 M 1 GB graphics
  (3059 MB Total: 1.5 GB dedicated + 1523 MB memory shared memory)

  I just brought my laptop yesterday,
  I format and reinstall windows7 ultimate 32 bit, and I download the display driver amd from the toshiba Web site.
  It does not work, and I went to download from Web site of amd that the drive still does not work.

  Can u please help me and tell me how to install it?

  Please, I beg you. Thank you.

  Hello

  What do you exactly because it does not work?
  Have you chosen the right driver?

  Here's your laptop where you can download the driver:
  http://www.MyToshiba.com.au/support/computers/satellite/l750d/psk36a-050011/download?OS=24

  Could you please confirm that you have used the AMD v 8,836 display driver driver?

• Satellite L30 PSL33: Link to the display driver does not work

  I'm trying to download displey drivers but the link does not work

  Satellite L30 PSL33
  http://ru.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=ru

  I use dial-up/modem

  > I'm using modem dial-up /: D
  Maybe it's too slow s

  I checked the Power Saver link and this tool can be downloaded.
  Therefore recommend that you check it again!

• I get an error code, ""this device does not work properly because Windows cannot load the drivers required for this device. " (Code 31) "on the computer.

  My drive hard seagate is not recognized on my laptop, I can see it in the legacy of the laptop but has an exclamation deside it, there a message when I tried to solve the problems, error was not fixed, the device status is "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) »

  Is anyone know how can I access my hard drive again?

  Thank you

  Hello

  You has made changes to the system before the error appearing?  Cancel the changes.

  (1) in Device Manager > right click on the driver, and then select uninstall

  Reboot and Windows will reload the driver

  (2) remove the upper & lower filters that cause errors in Code 31

  http://pcsupport.about.com/od/driverssupport/HT/UpperFilters-LowerFilters.htm

  Access the manufacturer's Web site and search for updated driver

• Computer does not recognize network. -This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  Hello!

  I have problems connecting to my network. I stay in a House (not my own) and I can't connect to the network in this House. When I choose the option 'connect to a network', nothing happens. I followed the instructions to display the "Device Manager" and watch the 'map', and he said:

  "This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available. »

  When I click on this button, nothing happens... Should I simply wait for Microsoft to return to me - or is there something else I need to do?

  Thank you!

  Hello

  You must get the drivers latset for m computer support site.

  Delete the "false: entry in Device Manager and install the new drivers."

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• CD/dvd drive does not work - it is recognized when the computer starts, and it is listed in the Device Manager?

  I am running Vista Home Premium on a laptop Compaq Presario F700. It is listed in the list of computers of readers, it is listed in Device Manager. The lites drive that the computer boots so I know it is detected. When you run itunes or media player the player does not open. When I push the drive button it will not open. It opens with a paperclip in the exit hole. It cannot read a CD or a DVD. None of the media players even recognize there is a disc in the drive. I tried to run fixit, but it would not drive either. I tried restoring from a previous backup, without change.

  Hello

  Check / settings (BIOS/CMOS) often F2 so watch the screen as it starts - place CD/DVD
  1st in the boot order (remember to put it at the time where the fact).

  Then put in a DVD to boot Windows and see if the driver works.

  If it doesn't then it's a hardware problem.

  =======================================

  If the drive has worked in the test above, that these can help:

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• CD/DVD drive does not work error Code 19 a dI have tried all the solutions of correction that I can find.

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available.

  I tried Mr. Fixit, and I still keep getting the same message again and again... It was working fine, less then a month ago.

  Hello

  19 code means there is a driver conflict such as two devices attempt to use the same resources.

  Please make all underneath the same if you've done it before as it's often the total of the process which
  solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.

  Normally the above will solve this problem if not work your way down through them, even if you
  done before.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  --------------------------------------------------------------------------------------

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.