After the abduction of a trojan virus, I still have no internet access

After the abduction of a trojan virus, I still have no internet access with Internet explorer, Google Earth, or Yahoo Messenger. Attempt to update Yahoo Messenger from a download of update, a message indicates "Yahoo Messenger is unable to download files needed for installation. Please check the firewall settings and try again. It does not matter whether or not the firewall is disabled. Yahoo Messenger is able to connect, but not to show me the list of the rooms in the right panel. Firefox still works fine and all I use.

Here are a few things to check after an infection or elimination:

We will check your network connection properties.

Some malware will alter these settings and your anti malware software can't tell if you have changed the malware changed them or so, after removal of infections, it will leave just the settings as he finds them (it is usually a good thing), but can leave your disabled Internet access.

Click Start, run and enter in the box:

Inetcpl.cpl

Click OK to launch the Internet Properties Control Panel, choose connections, LANsettings.

Or, in Internet Explorer click on tools, Options, connections, LAN settings.

These settings control your Internet access for all browsers.

(If you make settings, write them down so you can undo changes if you must)

On most environments, not independent, there will be check automatically detect settings and the other boxes are (as Proxy Server) is disabled.

Automatically detect the setting checked =
Use the automatic configuration script = unchecked
Use a proxy server for your LAN = not checked

Make changes, then click OK, OK to save the settings.

Check your settings for how your network adapter gets its IP and DNS settings.  On most home systems, these parameters must be defined for the system will get the settings automatically.

If you have another system on your network that works, you can compare these settings with the settings of the system which is not a work and make adjustments.

Click Start, settings, Control Panel, network connections, and then select your current network connection.

On the general tab, click Properties.

In the drop down in the Middle, find and highlight the selection of Internet Protocol (TCP/IP) and click Properties.

In the Internet Protocol Properties window, the usual selections are to get the IP and DNS settings automatically.  Select the following two options:

Obtain an IP address automatically
Get a DNS server address automatically

The rest of the options on the screen should then be grayed out/not available.

Make changes, then click OK, OK to save the settings.

Restart your computer and test your connection.

If it still does not work, check your settings are still in place after a restart and then release and renewal IP of your network device configuration settings.

Click Start, run and enter in the box:

cmd

Click OK to open a command prompt window, and then type the following commands:

ipconfig/release

ipconfig / renew

output

Restart your computer and test your connection.

Download, install, update and do a full scan with these free malware detection programs can solve any problems:

Malwarebytes (MMFA): http://malwarebytes.org/

SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

It can be uninstalled later if you wish.

Do, or do not. There is no test.

I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

Tags: Windows

Similar Questions

  • Can I order vista sp2 and all the other updates on cd-rom, as I have limited internet access, with a telephone modem prepaid, Email removed for privacy

    I run an Acer Aspire, Windows Vista home basic sp1, Mobistar connected download capassity only 250 MB

    No I know not. See this previous discussion: http://social.answers.microsoft.com/Forums/en-US/vistainstall/thread/f6c7f79b-b88d-490f-8542-e57b1ff3cf6f

    Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been postponed until February 26, 2010, so move on! Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack).

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Try to connect to the wireless computer after freshly installed Windows says I am connected to the router, but I have no internet access

    Original title: connection problem

    Hello! I recently did a clean installation of Windows 7 Professional 64 bit and I use a wireless USB adapter. Windows says I am connected to the router, but I have no internet access, and I have this yellow on trinagle. Work of all my other Windows 7 PCs, but this one. Could someone help me? Thank you!

    Hello

    Welcome to the community forums of Microsoft and thanks for posting the question. I've surely you will help find a solution on the issue. I see that you are unable to connect to the wireless network after you perform a new installation.

    I suggest you to consult the steps described in the article:

    Method 1:

    You can try the steps in the link and check.

    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    You can update the driver of windows 7 on the manufacturer's Web site.

    Method 2:


    You can remove and re-create the wireless network connection, follow these steps:

    a. Click Start, type ncpa.cpl , and then press on Enter.
    b. right click on your wireless network connection and then click Properties.
    c. click the wireless networks tab.
    d. under preferred networks, click your Wireless
    network and then click on remove. e. click on view Wireless networks.
    f. under management of the network, click refresh the network list.
    g. under Choose a wireless network, click the wireless network to which you want to connect, and then click Connect.

    Method 3:
     

    If the steps above don't you can uninstall and reinstall the NIC drivers and check with the question.

    a. click on Start menu, in the Search tab type devmgmt.msc and press ENTER.

    b. right click on network adapters and click Uninstall and restart the computer.

    c. after rebooting, install network cards and check with the question.


    Method 4:

    You can temporarily disable the antivirus and firewall on the computer and see if it helps:
    Enable or disable Windows Firewall
    NOTE: Turn off Windows Firewall might make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers.
    You can see the following link to disable the Antivirus installed on your computer software.
     
    NOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks

    Please follow these recommended steps and post if you still experience the problem. I'd be happy to help you further.
  • blocks of Lightroom after the use of crops funktion. Export still works, but after you have selected the following image, lightroom must be inexplicable manually (no response from the program). environment: windows 7 adobe cc 2015

    blocks of ightroom after the use of crops funktion. Export still works, but after you have selected the following image, lightroom must be inexplicable manually (no response from the program). environment: windows 7 adobe cc 2015

    Turning off graphics acceleration. Go to preferences-> Performance tab and uncheck the box there.

  • Access to the file is denied. You don't have permission to access the file C:\PROGRA~1\Office14

    Hello

    I created a new e-mail account and fails my.  Running Microsoft Office 2010.

    When you open outlook, I get the error:

    Access to the file is denied.  You don't have permission to access the file Email C:\PROGRA~1\Office14\*** address is removed from the privacy * address email is removed from the privacy *.

    Cannot open your default e-mail folders

    Click Help and I get the following message:

    This error can occur if you attempt to run Outlook in a Terminal Services session when the Outlook offline (.ost) data file is used by the console session.

    To access this instance of Outlook, exit the current Terminal Server session, and then start a new session using the following run command in Microsoft Windows:

    mstsc.exe/console you must be an administrator on the computer that accesses the console session. You can not access a console session of a computer that is running Microsoft Windows XP Home edition. But you can do this from a computer that is running Microsoft Windows Server 2003, Windows XP Professional, Windows Vista, or Windows 7.

    For more information, see article 826488 in the Microsoft Knowledge Base.

    You must make sure that your e-mail records are kept in a place outside system such as C:\Program Files folders. It is a restriction of the UAC.

  • In order to become a distributor of volume Adobe Reader, (my computers have no internet access), I need to fill out the Distribution of Volume License Agreement, but will not accept an answer I gave to the question: "Please indicate the product or service

    In order to become a distributor of volume Adobe Reader, (my computers have no internet access), I need to fill out the Distribution of Volume License Agreement, but will not accept an answer I gave to the question: "Please indicate the product or service name and description.

    This form must be completed and submitted online. Also the browser Javascript must be activated.

    https://distribute.Adobe.com/mmForm/index.cfm?name=distribution_form&PV=RDR

  • I would like to remove Adobe Creative cloud of the bar menu on my Macbook and my computer altogther, but it won't uninstall and I get a message saying "unable to d├⌐sinstaller the creative cloud to desktop. You still have clouds Creative app

    I would like to remove Adobe Creative cloud of the bar menu on my Macbook and my computer altogther, but it won't uninstall and I get a message saying "unable to d├⌐sinstaller the creative cloud to desktop. You still have Creative Cloud applications installed on your computer in need. "As far as I know, I have all the apps creative Cloud on my computer!

    Hello

    Please see below for the required details.

    https://helpx.Adobe.com/creative-cloud/help/uninstall-creative-cloud-desktop-app.html

    Thank you

    CharAt()

  • After fighting a multitude of Trojans, viruses and spyware, I can't connect to Windows Update and don't worry I'm still infected!

    So I'm trying to save my dad's computer (and its files + settings) after that he was struck with a variety of bad guys: Alureon, FakeSysDef, Blacole, Gen-Nullo, difficulty system, etc..

    Has finally got the office programs and files back after the entire MBAM, TDSSKiller, SuperAntiSpyware, etc., of jazz, but STILL not get things all the way back to the normal and good scans with MSSE, MBAM and MS Security Scanner are clean, I am afraid that the computer is always infested with something or the other...  (mainly due to my inability to use / access Windows Update: receive the 0x800A0046 error code AND get it published (feat of Java Blacole) out of a Flash drive, I used my system between the two machines... stupid, I know)

    so, here are the details: Dell XPS: Windows XP Professional, Version 2002, Service Pack 3: seems to have been hit in early November that there is no fixes/updates after 11/14 or more.

    I told him years not to run multiple antivirus + spyware programs at the same time, but he ignored me consistently.  I have since completely uninstalled Norton (using their removal tool on a newly created user account, as I couldn't make it work on sound - both are admin ETCA) and Webroot and installed MSSE.  At one point he swindled with system security 2011 and from there installed PC Fix, difficulty system and any other fake antivirus, it can click.  When the first infestation (before everything went to sh * t) I was takled him thanks to a restoration system and scan... About a week later, he ignored previous orders on not clicking or not to install anything without calling me everything first and got the rest of them (see list above).

    This time, we could not access any program, web page, without failure, System Restore, its own user account, etc etc.  Somehow (with MBAM, TDSSKiller, etc) I entered the computer, installed process explorer, started the happy hunting and following 'view' & restore icons/programs/etc.  And yet we always face the dilemma of Windows Update, the loss of its sites Favorites/tabs, loss of / NO content in administrative tools (both through the control panel and Start Menu: file is empty when it is open) and inability to use the system restore.

    I found this thread ( http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/windows-update-not-working-ie8xphome-error/db7956c9-d77c-e011-9b4b-68b599b31bf5 ) in which the fellow was in THE SAME EXACT POSITION I'm NOW - for a tee - who said: "those who would be interested - this problem has been resolved by an engineer from climbing on the Team Support of Windows XP.  It was "Removing Group Policy" through a registry fix, "Reloading safety model" via several downloads and finally run a .bat file also downloaded. "So I guess I need help do the same.

    Can someone help me or offer any other advice or assistance to get this sorted out?  Thank you in advance for anything you can do!

    See you soon,.

    Katherine

    Hi Mike,.

    Yes, I tried all these steps without success...

    Buuuuut...

    I ended up calling the Microsoft's Technet support, which helped me to identify two registry entries that the horde of virus/trojan/rootkit had created changed, that I had not already taken AND finished the download of some clever little program (difficulty WU Utility I think?) which allowed me to reset + reregister the BITs, cryptographic, & System Restore services...  That did the trick (although, as far as I know; dear ol ' pop reported no problems at the moment ;-))

    Thank you Jeebus! Laughing out loud

    See you soon,.

    Katherine Parrick

  • Unable to connect to the internet after the removal of system tool virus

    A computer running Windows XP Media Center Edition Version 2002, Service Pack 3 has got a virus System Tool which I believe I deleted using the key of activation and then run Malwarebytes' Anti-Malware.  On reboot, the system tool icon was still in the system tray, so I ran Norton 360 to remove unwanted registry files.  He got rid of the icon in the system tray.  I also then removed the Malwarebytes software.  Please note that, while I was removing the virus, I was able to connect to AOL so that in mode safe mode with networking.  Finally, who has stopped working.  The Malwarebytes software has been downloaded on the infected computer with a flash drive from a computer with working internet.

    I cannot now connect to the internet with Internet Explorer 8 or AOL (under standard or secure modes).  When you are trying to connect with IE8, the message reads 'Internet Explorer cannot display the web page' and when I run the diagnostic tests, it indicates there is a problem with the modem and/or router.  These devices are, however, both the work that there are other computers connected to them and they work.

    I tried Microsoft solutions are answers to a similar question.  Unfortunately, none of them worked in my situation.  They have been in accordance with the following:

    No doubt...

    What happens when you try to connect to the Internet?

    What is your version of XP, the version of Service Pack and IE?

    What method did you relieve your system of affection 'Antivir Solution Pro' (how confident you are that you got rid of him)?

    Generally, any part of this procedure is necessary after removing Antivir Solution Pro (a well documented removal procedure would have included the steps to cancel Internet connectivity issues).  I would get my infected system and try the procedure you used to see how it works.

    If, when you try to connect with Internet Explorer, you see something like:

    Internet Explorer cannot display this webpage
      
    The most likely causes:
    You are not connected to the Internet.
    The Web site encounters problems.
    There could be a typing error in the address.

    We will check your network connection properties.

    Some malware will alter these settings and your anti malware software can't tell if you have changed the malware changed them or so, after removal of infections, it will leave just the settings as he finds them (it is usually a good thing), but can leave your Internet disabled in certain situations.
     
    Click Start, run and enter in the box:

    Inetcpl.cpl

    Click OK to start the network settings of Internet control panel applet properties, connections.

    Or, in Internet Explorer click on tools, Options, connections, LAN settings.

    These settings control your Internet access for all browsers.

    On most environments, not independent, there will be check automatically detect settings and the other boxes are (as Proxy Server) is disabled.

    Automatically detect the setting checked =
    Use the automatic configuration script = unchecked
    Use a proxy server for your LAN = not checked

    Make changes, then click OK, OK to save the settings.

    Check your settings for how your network adapter gets its IP and DNS settings.  On most home systems, these parameters must be defined for the system will get the settings automatically.

    If you have another system on your network that works, you can compare these settings with the settings of the system which is not a work and make adjustments.

    Click Start, settings, Control Panel, network connections, and then select your current network connection.

    On the general tab, click Properties.

    In the drop down in the Middle, find and highlight the selection of Internet Protocol (TCP/IP) and click Properties.

    In the Internet Protocol Properties window, the usual selections are to get the IP and DNS settings automatically.  Select the following two options:

    Obtain an IP address automatically

    Get a DNS server address automatically

    The rest of the options on the screen should then be grayed out/not available.

    Make changes, then click OK, OK to save the settings.

    Restart your computer and test your connection.

    Perform scans for malware, and then fix any problems:

    Download, install, update and do a full scan with these free malware detection programs:

    Malwarebytes (MMFA): http://malwarebytes.org/
    SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

    They can be uninstalled later if you wish.

    Also, I typed cmd in the start run box and the command-line entered ipconfig enough and ipconfig/renew.  This is also not rectify the situation.

    For your assistance, the following is a copy of a part of the file that I thought that may be applicable after that I typed in miscinfo32 in start, run box:

    Summary of the system:

    Name of the operating system Microsoft Windows XP Professional
    Version 5.1.2600 Service Pack 3 Build 2600
    Manufacturer of operating system Microsoft Corporation
    System FIELD name
    System manufacturer Dell Inc.
    Dimension of the model 8400 system
    System Type X 86-based PC
    Processor x 86 Family 15 Model 4 Stepping 3 GenuineIntel ~ 2992 Mhz
    A04 BIOS Version/Date Dell Inc., 10/01/2005
    SMBIOS Version 2.3
    Windows C:\WINDOWS directory
    System directory C:\WINDOWS\system32
    Boot Device \Device\HarddiskVolume2
    The local United States
    Hardware Abstraction Layer Version = "5.1.2600.5512 (xpsp.080413 - 2111).
    CHAMP\steve user name
    Eastern Daylight Time zone
    Total physical memory 1 024,00 MB
    Available physical memory 534,65 MB
    Total virtual memory 2.00 GB
    Available virtual memory 1.96 GB
    Swap file space 2.40 GB
    Paging file C:\pagefile.sys

    Network card:

    Name [00000001] Broadcom NetXtreme 57xx Gigabit Controller
    Adapter Type Ethernet 802.3
    Product Type Broadcom NetXtreme 57xx Gigabit Controller
    Installed Yes
    ID of device PNP PCI\VEN_14E4 & DEV_1677 & SUBSYS_01771028 & REV_01\4 & 1D7EFF9E & 0 & 00E0
    Last reset 23/03/2011 14:51
    Index 1
    B57w2k service name
    IP 192.168.1.102
    IP 255.255.255.0 subnet
    Gateway IP 192.168.1.1
    Active Yes DHCP
    192.168.1.1 DHCP server
    DHCP lease expires on 2011-03-24 15:22
    DHCP lease obtained 23/03/2011-15:22
    MAC address 00:11:11:CB:96:8 D
    0xDCFF0000-0xDCFFFFFF memory address
    IRQ channel, IRQ 16
    Driver c:\windows\system32\drivers\b57xp32.sys (7.73.0.0 built by: WinDDK, 181,75 KB (186 112 bytes), 1980-01-01 01:00)
     
    Name [00000002] RAS Async adapter
    Card type not available
    Card product Type RAS Async
    Installed Yes
    PNP ID of device not available
    Last reset 23/03/2011 14:51
    Index 2
    Service name AsyncMac
    IP address not available
    IP subnet not available
    Default IP gateway not available
    DHCP active No.
    DHCP server not available
    DHCP lease expires not available
    DHCP lease obtained is not available
    MAC address is not available
     
    Name [00000003] Packet Scheduler Miniport
    Adapter Type Ethernet 802.3
    Product Type Packet Scheduler Miniport
    Installed Yes
    ROOT\MS_PSCHEDMP\0000 PNP device ID
    Last reset 23/03/2011 14:51
    Index 3
    Name of the service
    IP address not available
    IP subnet not available
    Default IP gateway not available
    DHCP active No.
    DHCP server not available
    DHCP lease expires not available
    DHCP lease obtained is not available
    MAC address 00:11:11:CB:96:8 D
    Driver c:\windows\system32\drivers\psched.sys (5.1.2600.5512 (xpsp.080413 - 0852), 67,50 KB (69 120 bytes), 10/08/2004-07:00)
     
    Name [00000004] Wan WAN (L2TP) Miniport
    Card type not available
    Product type Wan (L2TP) WAN Miniport
    Installed Yes
    ROOT\MS_L2TPMINIPORT\0000 PNP device ID
    Last reset 23/03/2011 14:51
    Index 4
    Service name Rasl2tp
    IP address not available
    IP subnet not available
    Default IP gateway not available
    DHCP active No.
    DHCP server not available
    DHCP lease expires not available
    DHCP lease obtained is not available
    MAC address is not available
    Driver c:\windows\system32\drivers\rasl2tp.sys (5.1.2600.5512 (xpsp.080413 - 0852), 50,13 KB (51 328 bytes), 10/08/2004-07:00)
     
    Name [00000005] Wan WAN (PPTP) Miniport
    Adapter Type wide area network (WAN)
    Product type Miniport Wan WAN (PPTP)
    Installed Yes
    ROOT\MS_PPTPMINIPORT\0000 PNP device ID
    Last reset 23/03/2011 14:51
    Index 5
    Service name PptpMiniport
    IP address not available
    IP subnet not available
    Default IP gateway not available
    DHCP active No.
    DHCP server not available
    DHCP lease expires not available
    DHCP lease obtained is not available
    MAC address 50:50:54:50:30:30
    Driver c:\windows\system32\drivers\raspptp.sys (5.1.2600.5512 (xpsp.080413 - 0852), 47.25 KB (48 384 bytes), 10/08/2004-07:00)
     
    Name [00000006] WAN (PPPOE) Miniport
    Adapter Type wide area network (WAN)
    Product type WAN (PPPOE) Miniport
    Installed Yes
    ROOT\MS_PPPOEMINIPORT\0000 PNP device ID
    Last reset 23/03/2011 14:51
    Index 6
    Service name RasPppoe
    IP address not available
    IP subnet not available
    Default IP gateway not available
    DHCP active No.
    DHCP server not available
    DHCP lease expires not available
    DHCP lease obtained is not available
    MAC address 33:50:6F:45:30:30
    Driver c:\windows\system32\drivers\raspppoe.sys (5.1.2600.5512 (xpsp.080413 - 0852), 40,50 KB (41 472 bytes), 10/08/2004-07:00)
     
    Name [00000007] Direct parallel
    Card type not available
    Product Type Direct parallel
    Installed Yes
    ROOT\MS_PTIMINIPORT\0000 PNP device ID
    Last reset 23/03/2011 14:51
    Index 7
    Service name Raspti
    IP address not available
    IP subnet not available
    Default IP gateway not available
    DHCP active No.
    DHCP server not available
    DHCP lease expires not available
    DHCP lease obtained is not available
    MAC address is not available
    Driver c:\windows\system32\drivers\raspti.sys (5.1.2600.0 (xpclient.010817 - 1148), 16,13 KB (16 512 bytes), 10/08/2004-07:00)
     
    Name [00000008] Wan (IP) Miniport
    Card type not available
    Type of product (IP) WAN Miniport
    Installed Yes
    ROOT\MS_NDISWANIP\0000 PNP device ID
    Last reset 23/03/2011 14:51
    8 index
    Service name NdisWan
    IP address not available
    IP subnet not available
    Default IP gateway not available
    DHCP active No.
    DHCP server not available
    DHCP lease expires not available
    DHCP lease obtained is not available
    MAC address is not available
    Driver c:\windows\system32\drivers\ndiswan.sys (5.1.2600.5512 (xpsp.080413 - 0852), 89,38 KB (91 520 bytes), 10/08/2004-07:00)
     
    Name [00000009] Packet Scheduler Miniport
    Adapter Type Ethernet 802.3
    Product Type Packet Scheduler Miniport
    Installed Yes
    ROOT\MS_PSCHEDMP\0001 PNP device ID
    Last reset 23/03/2011 14:51
    Index 9
    Name of the service
    IP address not available
    IP subnet not available
    Default IP gateway not available
    DHCP active No.
    DHCP server not available
    DHCP lease expires not available
    DHCP lease obtained is not available
    16:4 MAC address: 20:52:41:53
    Driver c:\windows\system32\drivers\psched.sys (5.1.2600.5512 (xpsp.080413 - 0852), 67,50 KB (69 120 bytes), 10/08/2004-07:00)
     
    Network adapter 1394 name [00000010]
    Adapter Type Ethernet 802.3
    Product Type 1394 network adapter
    Installed Yes
    V1394\NIC1394\9103858423C01 PNP device ID
    Last reset 23/03/2011 14:51
    Index 10
    Service name NIC1394
    IP address not available
    IP subnet not available
    Default IP gateway not available
    Active Yes DHCP
    DHCP server not available
    DHCP lease expires not available
    DHCP lease obtained is not available
    MAC address 52:df:35:27:59:E5
    Pilot c:\windows\system32\drivers\nic1394.sys (5.1.2600.5512 (xpsp.080413 - 0852), 60,38 KB (61 824 bytes), 10/08/2004-07:00)
     
    Name [00000011] Miniport Wan WAN (ATW)
    Adapter Type wide area network (WAN)
    Product type Miniport Wan WAN (ATW)
    Installed Yes
    ROOT\NET\0000 PNP device ID
    Last reset 23/03/2011 14:51
    11 index
    WANATW service name
    IP address not available
    IP subnet not available
    Default IP gateway not available
    DHCP active No.
    DHCP server not available
    DHCP lease expires not available
    DHCP lease obtained is not available
    00:03: 8A: 00:00:15 of MAC address
    Driver c:\windows\system32\drivers\wanatw4.sys (8.3.0.0, 32,80 KB (33 588 bytes), 2005-02-23 22:12)
     
    Name [00000012] Symantec Network Security Miniport
    Adapter Type Ethernet 802.3
    Type of product Symantec Network Security Miniport
    Installed Yes
    ROOT\SYMC_SYMIMMP\0000 PNP device ID
    Last reset 23/03/2011 14:51
    12 index
    Service name SymIMMP
    IP address not available
    IP subnet not available
    Default IP gateway not available
    DHCP active No.
    DHCP server not available
    DHCP lease expires not available
    DHCP lease obtained is not available
    MAC address 00:11:11:CB:96:8 D
    Driver c:\windows\system32\drivers\symim.sys (9.2.0.37, 35.55 KB (36 400 bytes), 2009-07-28 23:21)
     
    Name [00000013] Symantec Network Security Miniport
    Adapter Type Ethernet 802.3
    Type of product Symantec Network Security Miniport
    Installed Yes
    ROOT\SYMC_SYMIMMP\0001 PNP device ID
    Last reset 23/03/2011 14:51
    13 index
    Service name SymIMMP
    IP address not available
    IP subnet not available
    Default IP gateway not available
    DHCP active No.
    DHCP server not available
    DHCP lease expires not available
    DHCP lease obtained is not available
    16:4 MAC address: 20:52:41:53
    Driver c:\windows\system32\drivers\symim.sys (9.2.0.37, 35.55 KB (36 400 bytes), 2009-07-28 23:21)

    Network Protocol:

    Name MSAFD Tcpip [TCP/IP]
    Service numbers without connection
    Guarantees delivery Yes
    Yes guarantees sequencing
    Maximum address size 16 bytes
    Message size maximum 0 bytes
    Message Oriented No.
    Minimum address size 16 bytes
    Pseudo stream oriented No.
    Supports broadcasting no.
    Supports Connect Data No.
    Supports disconnect Data No.
    Supports encryption no.
    Supports shipped data Yes
    Supports graceful closing Yes
    Supports guaranteed bandwidth Yes
    Supports multicast No.
     
    Name MSAFD Tcpip [UDP/IP]
    Connectionless service Yes
    Guaranteed delivery no.
    Guarantees sequencing No.
    Maximum address size 16 bytes
    63,93 Message size maximum KB (65 467 bytes)
    Message Oriented Yes
    Minimum address size 16 bytes
    Pseudo stream oriented No.
    Media broadcasting Yes
    Supports Connect Data No.
    Supports disconnect Data No.
    Supports encryption no.
    Supports data dispatched No.
    Supports graceful closing No.
    Supports guaranteed bandwidth Yes
    Supports multicast Yes
     
    Name RSVP UDP Service provider
    Connectionless service Yes
    Guaranteed delivery no.
    Guarantees sequencing No.
    Maximum address size 16 bytes
    63,93 Message size maximum KB (65 467 bytes)
    Message Oriented Yes
    Minimum address size 16 bytes
    Pseudo stream oriented No.
    Media broadcasting Yes
    Supports Connect Data No.
    Supports disconnect Data No.
    Supports encryption Yes
    Supports data dispatched No.
    Supports graceful closing No.
    Supports guaranteed bandwidth Yes
    Supports multicast Yes
     
    Name RSVP TCP Service provider
    Service numbers without connection
    Guarantees delivery Yes
    Yes guarantees sequencing
    Maximum address size 16 bytes
    Message size maximum 0 bytes
    Message Oriented No.
    Minimum address size 16 bytes
    Pseudo stream oriented No.
    Supports broadcasting no.
    Supports Connect Data No.
    Supports disconnect Data No.
    Supports encryption Yes
    Supports shipped data Yes
    Supports graceful closing Yes
    Supports guaranteed bandwidth Yes
    Supports multicast No.
     
    MSAFD [\Device\NetBT_Tcpip_{86DE67BB-124C-4039-9E0A-6E34D8ED163A}] SEQPACKET NetBIOS name 3
    Service numbers without connection
    Guarantees delivery Yes
    Yes guarantees sequencing
    Maximum address size 20 bytes
    Maximum Message size 62.50 KB (64 000 bytes)
    Message Oriented Yes
    Bytes of address size 20 minimums
    Pseudo stream oriented No.
    Supports broadcasting no.
    Supports Connect Data No.
    Supports disconnect Data No.
    Supports encryption no.
    Supports data dispatched No.
    Supports graceful closing No.
    Supports guaranteed bandwidth Yes
    Supports multicast No.
     
    MSAFD [\Device\NetBT_Tcpip_{86DE67BB-124C-4039-9E0A-6E34D8ED163A}] DATAGRAM 3 NetBIOS name
    Connectionless service Yes
    Guaranteed delivery no.
    Guarantees sequencing No.
    Maximum address size 20 bytes
    Maximum Message size 62.50 KB (64 000 bytes)
    Message Oriented Yes
    Bytes of address size 20 minimums
    Pseudo stream oriented No.
    Media broadcasting Yes
    Supports Connect Data No.
    Supports disconnect Data No.
    Supports encryption no.
    Supports data dispatched No.
    Supports graceful closing No.
    Supports guaranteed bandwidth Yes
    Supports multicast No.
     
    MSAFD [\Device\NetBT_Tcpip_{FDBF57E6-2C39-4D5C-90D7-D29559CA61B2}] SEQPACKET NetBIOS name 0
    Service numbers without connection
    Guarantees delivery Yes
    Yes guarantees sequencing
    Maximum address size 20 bytes
    Maximum Message size 62.50 KB (64 000 bytes)
    Message Oriented Yes
    Bytes of address size 20 minimums
    Pseudo stream oriented No.
    Supports broadcasting no.
    Supports Connect Data No.
    Supports disconnect Data No.
    Supports encryption no.
    Supports data dispatched No.
    Supports graceful closing No.
    Supports guaranteed bandwidth Yes
    Supports multicast No.
     
    MSAFD [\Device\NetBT_Tcpip_{FDBF57E6-2C39-4D5C-90D7-D29559CA61B2]} 0 DATAGRAM NetBIOS name
    Connectionless service Yes
    Guaranteed delivery no.
    Guarantees sequencing No.
    Maximum address size 20 bytes
    Maximum Message size 62.50 KB (64 000 bytes)
    Message Oriented Yes
    Bytes of address size 20 minimums
    Pseudo stream oriented No.
    Media broadcasting Yes
    Supports Connect Data No.
    Supports disconnect Data No.
    Supports encryption no.
    Supports data dispatched No.
    Supports graceful closing No.
    Supports guaranteed bandwidth Yes
    Supports multicast No.
     
    MSAFD [\Device\NetBT_Tcpip_{9E8A814B-6996-4336-9096-A51FC25DDFFD}] SEQPACKET NetBIOS name 1
    Service numbers without connection
    Guarantees delivery Yes
    Yes guarantees sequencing
    Maximum address size 20 bytes
    Maximum Message size 62.50 KB (64 000 bytes)
    Message Oriented Yes
    Bytes of address size 20 minimums
    Pseudo stream oriented No.
    Supports broadcasting no.
    Supports Connect Data No.
    Supports disconnect Data No.
    Supports encryption no.
    Supports data dispatched No.
    Supports graceful closing No.
    Supports guaranteed bandwidth Yes
    Supports multicast No.
     
    MSAFD [\Device\NetBT_Tcpip_{9E8A814B-6996-4336-9096-A51FC25DDFFD}] DATAGRAM 1 NetBIOS name
    Connectionless service Yes
    Guaranteed delivery no.
    Guarantees sequencing No.
    Maximum address size 20 bytes
    Maximum Message size 62.50 KB (64 000 bytes)
    Message Oriented Yes
    Bytes of address size 20 minimums
    Pseudo stream oriented No.
    Media broadcasting Yes
    Supports Connect Data No.
    Supports disconnect Data No.
    Supports encryption no.
    Supports data dispatched No.
    Supports graceful closing No.
    Supports guaranteed bandwidth Yes
    Supports multicast No.
     
    MSAFD [\Device\NetBT_Tcpip_{39725903-652B-46ED-A34D-F03FCA3F2EA2}] SEQPACKET NetBIOS name 2
    Service numbers without connection
    Guarantees delivery Yes
    Yes guarantees sequencing
    Maximum address size 20 bytes
    Maximum Message size 62.50 KB (64 000 bytes)
    Message Oriented Yes
    Bytes of address size 20 minimums
    Pseudo stream oriented No.
    Supports broadcasting no.
    Supports Connect Data No.
    Supports disconnect Data No.
    Supports encryption no.
    Supports data dispatched No.
    Supports graceful closing No.
    Supports guaranteed bandwidth Yes
    Supports multicast No.
     
    MSAFD [\Device\NetBT_Tcpip_{39725903-652B-46ED-A34D-F03FCA3F2EA2]} 2 DATAGRAM NetBIOS name
    Connectionless service Yes
    Guaranteed delivery no.
    Guarantees sequencing No.
    Maximum address size 20 bytes
    Maximum Message size 62.50 KB (64 000 bytes)
    Message Oriented Yes
    Bytes of address size 20 minimums
    Pseudo stream oriented No.
    Media broadcasting Yes
    Supports Connect Data No.
    Supports disconnect Data No.
    Supports encryption no.
    Supports data dispatched No.
    Supports graceful closing No.
    Supports guaranteed bandwidth Yes
    Supports multicast No.
     
    MSAFD [\Device\NetBT_Tcpip_{4CF6D63E-0CE2-43D2-A604-E0B5AE500F96}] SEQPACKET NetBIOS name 4
    Service numbers without connection
    Guarantees delivery Yes
    Yes guarantees sequencing
    Maximum address size 20 bytes
    Maximum Message size 62.50 KB (64 000 bytes)
    Message Oriented Yes
    Bytes of address size 20 minimums
    Pseudo stream oriented No.
    Supports broadcasting no.
    Supports Connect Data No.
    Supports disconnect Data No.
    Supports encryption no.
    Supports data dispatched No.
    Supports graceful closing No.
    Supports guaranteed bandwidth Yes
    Supports multicast No.
     
    MSAFD [\Device\NetBT_Tcpip_{4CF6D63E-0CE2-43D2-A604-E0B5AE500F96}] DATAGRAM 4 NetBIOS name
    Connectionless service Yes
    Guaranteed delivery no.
    Guarantees sequencing No.
    Maximum address size 20 bytes
    Maximum Message size 62.50 KB (64 000 bytes)
    Message Oriented Yes
    Bytes of address size 20 minimums
    Pseudo stream oriented No.
    Media broadcasting Yes
    Supports Connect Data No.
    Supports disconnect Data No.
    Supports encryption no.
    Supports data dispatched No.
    Supports graceful closing No.
    Supports guaranteed bandwidth Yes
    Supports multicast No.
     
    MSAFD [\Device\NetBT_Tcpip_{037081C0-F24A-4CCD-AF1B-D5A478C0A28F}] SEQPACKET NetBIOS name 5
    Service numbers without connection
    Guarantees delivery Yes
    Yes guarantees sequencing
    Maximum address size 20 bytes
    Maximum Message size 62.50 KB (64 000 bytes)
    Message Oriented Yes
    Bytes of address size 20 minimums
    Pseudo stream oriented No.
    Supports broadcasting no.
    Supports Connect Data No.
    Supports disconnect Data No.
    Supports encryption no.
    Supports data dispatched No.
    Supports graceful closing No.
    Supports guaranteed bandwidth Yes
    Supports multicast No.
     
    MSAFD [\Device\NetBT_Tcpip_{037081C0-F24A-4CCD-AF1B-D5A478C0A28F}] DATAGRAM 5 NetBIOS name
    Connectionless service Yes
    Guaranteed delivery no.
    Guarantees sequencing No.
    Maximum address size 20 bytes
    Maximum Message size 62.50 KB (64 000 bytes)
    Message Oriented Yes
    Bytes of address size 20 minimums
    Pseudo stream oriented No.
    Media broadcasting Yes
    Supports Connect Data No.
    Supports disconnect Data No.
    Supports encryption no.
    Supports data dispatched No.
    Supports graceful closing No.
    Supports guaranteed bandwidth Yes
    Supports multicast No.

    WinSock network:

    File c:\windows\system32\winsock.dll
    Size of 2.80 KB (2 864 bytes)
    Version 3.10
     
    File c:\windows\system32\wsock32.dll
    Size 22,00 KB (22 528 bytes)
    Version 5.1.2600.5512 (xpsp.080413 - 0852)

    Summary of Internet Explorer:

    Version 8.0.6001.18702
    Build 86001
    Ask the path C:\Program may Explorer
    English (United States)
    Active printer Dell AIO Printer A920, winspool, Ne04:
     
    Level of 128-bit encryption
    Disabled Access Manager
    IEAK install not

    Internet Explorer Versions of files:

    Actxprxy.dll 6.0.2900.5512 96 KB 2008-04-13 20:11:48 C:\WINDOWS\SYSTEM32 Microsoft Corporation
    Advpack.dll 8.0.6001.18702 126KO 08/03/2009 04:32:48 C:\WINDOWS\SYSTEM32 Microsoft Corporation
    Asctrls.ocx 6.0.2900.5512 112KO 2008-04-13 20:08:58 C:\WINDOWS\SYSTEM32 Microsoft Corporation
    browselc.dll 6.0.2900.5512 62KO 2008-04-13 13:03:24 C:\WINDOWS\SYSTEM32 Microsoft Corporation
    Browseui.dll 6.0.2900.5512 KB 1 001 2008-04-13 20:11:50 C:\WINDOWS\SYSTEM32 Microsoft Corporation
    cdfview.dll 6.0.2900.5512 148 KB 2008-04-13 20:11:50 C:\WINDOWS\SYSTEM32 Microsoft Corporation
    Comctl32.dll 5.82.2900.6028 603 KB 2010-08-23 12:12:04 C:\WINDOWS\SYSTEM32 Microsoft Corporation
    Dxtrans.dll 8.0.6001.18702 211KO 08/03/2009 04:31:38 C:\WINDOWS\SYSTEM32 Microsoft Corporation
    Dxtmsft.dll 8.0.6001.18702 340KO 08/03/2009 04:31:44 C:\WINDOWS\SYSTEM32 Microsoft Corporation
    iecont.dll not available not available not available not available
    iecontlc.dll not available not available not available not available
    Iedkcs32.dll 18.0.6001.18968 379 KB 10/09/2010 01:58:03 C:\WINDOWS\SYSTEM32 Microsoft Corporation

    Iepeers.dll 8.0.6001.18968 180KO 09-10-2010 01:58:05 C:\WINDOWS\SYSTEM32 Microsoft Corporation
    Iesetup.dll 8.0.6001.18702 70 KB 08/03/2009 04:32:50 C:\WINDOWS\SYSTEM32 Microsoft Corporation
    ieuinit.inf not available 56 KB 2009-06-29 04:40:16 unavailable C:\WINDOWS\SYSTEM32
    Iexplore.exe 8.0.6001.18702 624KO 08/03/2009 14:09:26 C:\Program may Explorer Microsoft Corporation
    imgutil.dll 8.0.6001.18702 34KO 08/03/2009 04:31:38 C:\WINDOWS\SYSTEM32 Microsoft Corporation
    Inetcpl.cpl 8.0.6001.18968 1 435 KB 10/09/2010 01:58:06 C:\WINDOWS\SYSTEM32 Microsoft Corporation
    Inetcplc.dll 6.0.2600.0 108KO 10/08/2004 07:00 C:\WINDOWS\SYSTEM32 Microsoft Corporation
    Inseng.dll 8.0.6001.18702 93KO 08/03/2009 04:32:46 C:\WINDOWS\SYSTEM32 Microsoft Corporation
    MLang.dll 6.0.2900.5512 573 KB 2008-04-13 20:11:57 C:\WINDOWS\SYSTEM32 Microsoft Corporation
    MSENCODE.dll 2000.7.25.0 KB 92 10/08/2004 07:00 not available C:\WINDOWS\SYSTEM32
    Mshta.exe 8.0.6001.18702 45KO 08/03/2009 04:31:02 C:\WINDOWS\SYSTEM32 Microsoft Corporation
    Mshtml.dll 8.0.6001.18975 5 818 KB 10/09/2010 01:58:08 C:\WINDOWS\SYSTEM32 Microsoft Corporation
    Mshtml.tlb 8.0.6001.18702 1 601 KB 08/03/2009 04:31:02 C:\WINDOWS\SYSTEM32 Microsoft Corporation
    Mshtmled.dll 8.0.6001.18972 65KO 09-10-2010 01:58:08 C:\WINDOWS\SYSTEM32 Microsoft Corporation
    mshtmler.dll 8.0.6001.18702 47KO 08/03/2009 04:31:18 C:\WINDOWS\SYSTEM32 Microsoft Corporation
    Msident.dll 6.0.2900.5512 51KO 2008-04-13 20:11:59 C:\WINDOWS\SYSTEM32 Microsoft Corporation
    Msidntld.dll 6.0.2600.0 15 KB 10/08/2004 07:00 C:\WINDOWS\SYSTEM32 Microsoft Corporation
    msieftp.dll 6.0.2900.5512 243 KB 2008-04-13 20:11:59 C:\WINDOWS\SYSTEM32 Microsoft Corporation
    msrating.dll 8.0.6001.18702 189KO 08/03/2009 04:34:18 C:\WINDOWS\SYSTEM32 Microsoft Corporation
    mstime.dll 8.0.6001.18968 598KO 09-10-2010 01:58:08 C:\WINDOWS\SYSTEM32 Microsoft Corporation
    Occache.dll 8.0.6001.18968 202KO 09-10-2010 01:58:08 C:\WINDOWS\SYSTEM32 Microsoft Corporation
    proctexe.ocx 6.3.2900.5512 80 KB 2008-04-13 20:10:35 C:\WINDOWS\SYSTEM32 Intel Corporation
    sendmail.dll 6.0.2900.5512 54 KB 2008-04-13 20:12:05 C:\WINDOWS\SYSTEM32 Microsoft Corporation
    Shdoclc.dll 6.0.2900.5512 537KO 2008-04-13 13:03:19 C:\WINDOWS\SYSTEM32 Microsoft Corporation
    Shdocvw.dll 6.0.2900.5512 1 464 KB 2008-04-13 20:12:05 C:\WINDOWS\SYSTEM32 Microsoft Corporation
    Shfolder.dll 6.0.2900.5512 25KO 2008-04-13 20:12:05 C:\WINDOWS\SYSTEM32 Microsoft Corporation
    Shlwapi.dll 6.0.2900.5912 463ko 08/12/2009 05:23:28 C:\WINDOWS\SYSTEM32 Microsoft Corporation
    TDC.ocx 8.0.6001.18702 65KO 08/03/2009 04:30:56 C:\WINDOWS\SYSTEM32 Microsoft Corporation
    URL.dll 8.0.6001.18702 104KO 08/03/2009 04:34:28 C:\WINDOWS\SYSTEM32 Microsoft Corporation
    Urlmon.dll 8.0.6001.18968 1 183 KB 10/09/2010 01:58:08 C:\WINDOWS\SYSTEM32 Microsoft Corporation
    Webcheck.dll 8.0.6001.18702 231KO 08/03/2009 04:34:48 C:\WINDOWS\SYSTEM32 Microsoft Corporation
    WinInet.dll 8.0.6001.18968 895 KB 10/09/2010 01:58:08 C:\WINDOWS\SYSTEM32 Microsoft Corporation

    Internet Explorer connectivity:

    Dial connection preference never
     
    LAN settings
     
    AutoConfigProxy wininet.dll
    AutoProxyDetectMode disabled
    AutoConfigURL
    Proxy disabled
    ProxyServer
    ProxyOverride
     
    America Online
     
    AutoProxyDetectMode disabled
    AutoConfigURL
    Proxy disabled
    ProxyServer
    ProxyOverride
    Internet programs to use connection not available
     
    Maximum attempts 10
    Waiting between retries 5 sec
    Disconnect idle 20 min time
    Autodisconnect disabled
     
    Modem Intel(r) 537EP V9x DF PCI Modem
    Remote access PPP server
     
    Connect to the network
    Enable Software Compression Yes
    Would require no encrypted password
    Require no data encryption
     
    TCP/IP network protocols
     
    Use server assigned IP address Yes
    The 0.0.0.0 IP address
    Use server assigned NameServer Yes
    Primary addresses DNS name server: 0.0.0.0
    Secondary DNS: 0.0.0.0
    Primary WINS: 0.0.0.0
    Secondary WINS: 0.0.0.0
     
    Use the Compression header IP Yes
    Use the default gateway Yes
     
    Name of the script file

    You have any ideas that could help me find an internet connection?  Thanks for any help.

    The removal of the virus seems to have taken some required system files.  See if the System File Checker helps.  Click Start > run and enter in the field open.

    sfc/scannow

    Press ENTER.  The System File Checker must detect the missing necessary files and put back them.  If this does not work, use a system restore point from before you were infected.  If this does not work, get out of your XP installation diskettes.

  • After the update to os2.2 my notifications sounds have stopped working

    After the update my os 2.2 shows that my notifications have stopped working, I tried to reinstall the software and I restarted my iPhone and watch several times.

    ..

  • Digitizer of T2 frozen after the soft, hot and hard resets. Cannot have to calibrate at all.

    Sometimes my T2 must be recalibrated. I downloaed DigiFix a few months ago and it seemed to help a little. I hot sync my data last night and everything was fine. This morning I couldn't tap my screen to access anything whatsoever. I tried to thoroughly clean the edge of the screen, gently cleaned the screen (no visible damage to the screen noted), performed a reset (which usually works), software reset hot, followed by a warm reboot and, finally, a hard reset (data kept) followed by a warm reboot, then the big one, a hard reset with data loss followed with 5 soft resets in a row. I found the Forum a T2 update I downloaded and is ready to be installed when I got hot then sync.

    The unit is now fixed with the x in the start position in the upper left corner. Despite my efforts to knock quietly all around the X, I just can't get to recalibrate or even down the calibration screen. If I could just go to any ordinary screen, I could recover my data and install this update of T2.

    I also downloaded Pocket DVD studio a week ago and have been able to download the .avi files to watch videos on my Palm. I works perfectly. I think I still have the original Kimoma player on my T2, but never really like him. Can someone help me please? This update of T2 is supposed to help according to information I found in the forum... Thank you very much!

    Try to clean dirt that can accumulate between the bezel case and digitizer with the folded corner of a piece of copier paper. Do not go under the greater than 2.5 mm bezel. If you use a screen protector, it could have migrated under the window causing a tap screen Ghost and the substitution of all what you type. Remove it.

    If still no joy, perhaps your digitizer is worn and it is time to replace. pdaparts.com and usedpdaparts.com sell replacements and can install them for you, for a nominal sum of service.

    Message relates to: Palm TX

  • the itunes library could not be saved you have enough greenest access for this operation

    I get the following message when I upload music when I am in itunes. the itunes library could not be saved. You have enough greenest access for this operation

    Hi WesleyJefferson,

    ·         Did you do changes on the computer before the show?

    Follow the suggestions below for a possible solution:

    Method 1: These messages occur if the permissions are incorrect on your designated music folder or a folder in your designated music folder. The permissions are settings that determine who can read, write, or execute a file or a folder on your computer. Each file and folder on your hard drive has an associated permission set.

    Example: If the permissions are correct on your music folder, but incorrect on the U2 folder inside your music folder, you would be able to add other music to your iTunes library, but not this new U2 album.

    To apply permissions to a file or folder, see the article mentioned below:

    How to set, view, change, or remove special permissions for files and folders in Windows XP

    http://support.Microsoft.com/kb/308419

    Method 2: You can also read the article and check.

     

    Difficulties to add music to iTunes or audio CD import library

    http://support.Apple.com/kb/TS1387

     

    Method 3: Try to uninstall iTunes and other apple system applications and reinstall iTunes again. See the apple Web site to download iTunes. Click on the link below.

    http://www.Apple.com/

    Let us know if this information will help.

  • How can I download the drivers from Manufacter ' ' s Website if I have no internet.»

    original title: How can I download the drivers from Manufacter ' ' s Website so I havew no internet. ". Computer a wipe trying to download Microsoft XP! Now I can't access the internet.

    How can I download driver manufactuer website if I have no internet service?  Computer was wiped out trying to download Miccrosoft XP.  Now I can't access the internet.

    Hello

    In the case of no internet access, I suggest to download the driver on another computer that has internet access and save it. Later, you can use any flash drive or you can also burn it to a CD for transfer files downloaded to your computer and install the driver file.

    In order to bypass without network problem, follow the link below and check if this can help:

    http://support.Microsoft.com/kb/307164

    http://support.Microsoft.com/kb/314095

  • Removed vista from my computer and downloaded windows xp but now I have no internet access! I downloaded realtek but the computer has not done something with it!

    Downloaded realtk 8139/810 x using a flash drive, but although we see the file and clicked set up it does not work.  How can I get internet access again?  I seem to not have an ethernet.

    Hi Lorraine,.

    1. where did you downloaded the drivers from?

    2. what exactly happens when you try to run the set-up file? You receive messages or error codes?

    You can try to re - download the latest version of the network drivers on the manufacturer's Web site and check.

    Support for Realtek

    http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=6&level=5&Conn=4&DownTypeID=3&GETDOWN=false

    Realtek FAQ

    You can also try to update the latest version of the chipset drivers and check.

    Contact your motherboard manufacturer or the manufacturer of the chipset to get good support driver.

    How to manage devices in Windows XP

  • After the removal of viruses, I have no internet access. Only "absorbing IP" or "renewal IP", nothing els.

    I have windows XP, I had to remove a virus from the Dell XPS. After that, I can't connect to the internet. Either with a wireless connection to the router or a straight cable to the router. All I have is that I can't renew or obtain an IP address. I ran WinsockXP, LSPfix, nothing. I fixed my HOSTS file.

    Nothing.

    Help!

    This is not unusual.  Your best bet, in my opiniojn, is to backup all your data, and then reinstall Windows properly.

Maybe you are looking for