After the removal of viruses, I have no internet access. Only "absorbing IP" or "renewal IP", nothing els.

I have windows XP, I had to remove a virus from the Dell XPS. After that, I can't connect to the internet. Either with a wireless connection to the router or a straight cable to the router. All I have is that I can't renew or obtain an IP address. I ran WinsockXP, LSPfix, nothing. I fixed my HOSTS file.

Nothing.

Help!

This is not unusual.  Your best bet, in my opiniojn, is to backup all your data, and then reinstall Windows properly.

Tags: Windows

Similar Questions

  • Cannot depend on Windows Firewall after the removal of virus.

    I've removed a virus, but cannot enable Windows Firewall.  The error is "due to a problem not identified, Windows cannot display Windows Firewall settings"

    @Tricky300 good advice

    @krw006

    Each of the variations of the sirefef are extremely wicked him force more often you to reinstall Windows. The reason is that changes made to the file system is usually bad. I'll be happy to try to help you to see if we can get the system to its original state by removing the malware. Unfortunately, the problem is that the file system become corrupt you remove malware. This can often leave you with a computer that won't start plu.

    I would like first of all for you to get all your personal data off your computer. You have an external hard drive, cd/dvd disc or a disc thumb/flash that you can put your personal data for backup? In the affirmative, please download the data.

    Finally, I would like to know how you want to move forward. As stated, I can help to see if we can remove malware or I can help you format the drive and reinstall Windows. Of course, this assumes you have a Windows disc or another recovery option.

  • XP desktop icons missing after the removal of virus

    The computer will not show Task manager disabled by the administrator.  The virus has been removed by the technology Office Depot, but the desktop icons are missing and the Task Manager is not yet 'feature.  There is no bottom task bar either.

    Hi CairoS22,
     
    Follow the steps listed in the articles given below to resolve this issue:
     
     

  • lost product key and can not access computer - after the removal of virus; Then restart laptop that has requested that the product key

    I removed the virus using malbytes and AVG. I was invited to restart the laptop in order to remove the virus.  When restarting a laptop that asked that the product key, the problem is that I have lost. Can anyone suggest anything?

    I removed the virus using malbytes and AVG. I was invited to restart the laptop in order to remove the virus.  When restarting a laptop that asked that the product key, the problem is that I have lost. Can anyone suggest anything?

    Probably what you see is a fake windows alert activation. Please read the article on the link below to see if it applies to you.

    http://www.bleepingcomputer.com/virus-removal/remove-fake-Windows-activation

  • Cannot open programs after the removal of virus to the AVG Virus Vault and rebooted.

    Hi, I have AVG 2011 Free Edition and when I had a virus, AVG it is removed from the quarantine. He then told me to restart the computer to finish. So I restarted and I noticed that the programs which usually start up when I turn on the computer start (like AIM and others). In addition, when I try to open a program for example Firefox, it tells me to choose a program to open the file. It's really annoying and it won't let me choose a default program to open a specific file. Thank you all for the help!

    You have system restore before you have been affected by the virus?

    http://bertk.MVPs.org/index.html

  • Windows Firewall service does not start after the removal of Virus

    Hello

    I believe that my son's computer has been infected with the Trojan.Agent.Ed virus.  I managed to remove it (from different folders in AppData), but a few vestiges remain of course.  The windows firewall service does not start - it throws an exception to access denied on startup and when I try to start the service manually.
    I tried to run the Sysinternals Process Monitor to display all events ACCESS DENIED and checked the permissions on the key to registry MpsSvc in HKLM\System\CurrentControlSet\services and compared to a corresponding Windows 7 machine.  I've even exported the key MpsSvc and sous-branches of the laptop in good health and tried to import into a failure, but the import does not seem to occur, even if it gives a message "imported".
    I also tried the troubleshooting of Windows Firewall that confusedly says:
    "Windows could not start the Windows Firewall... Not fixed
    "Set permissions for the registry keys involved"... succeeded
    "Windows Firewall service is not started. Not fixed
    "Starting the Firewall Service"... succeeded
    Any ideas would be most appreciated.
    Thank you.

    It seems that I solved the problem by running this:

    that I found in a post on this thread:

  • Problem with Windows Update after the removal of Virus

    My operating system is Win Vista 32 bit, had some virus closed my windows updates, have a view of the white page. Checked that my services and win update is in automatic mode has started, so I don't know why my updater gives me a red x saying windows updater is turned off.  Any suggestions?

    [Original title: Windows Update]

    https://answers.Microsoft.com/en-us/protect/Forum/protect_other-protect_scanning/problem-with-Windows-Update-after-removing-virus/3a8dd279-2732-4693-88bf-f5cea4afca96>

    It makes more sense. How to reset the Windows Update components?

    Yet, as indicated in The ball , the search results links do not work. I also used several browsers and DuckDuckGo. Maybe it's because the Windows Update Agent was changed some time ago and the article is no longer valid.

    EDIT: If the OP is also struggling to access the link I suggest using repair Windows updates available from tweaking.com. I suggest also using the Registry backup of the same author before hand.

    Repair the Windows updates

    http://www.tweaking.com/content/page/repair_windows_updates.html

    Registry backup
    http://www.tweaking.com/content/page/registry_backup.html

    I hope this helps.

  • After the removal of virus, lost images and music

    because the virus has been removed I lost all my photos that I had on this subject and I lost all my music that I downloaded and when I try an email somewhere it shows error messages something on a port.

    Hi ernestpilkey,
     
    -What is the exact error message that you receive?
     
    It might be possible that those files had been corrupted by virus.
     
    To restore the system to an earlier point until this problem occurred.
    For more information, see:

  • XP Pro shortcuts do not work after the removal of virus

    had a virus (XP Internet Security 2011), cleaned and ran cc cleaner - now the shortcuts don't work unless I right click to uncheck the option «protect data...» "under the currently logged-on user account, or choose 'run as administrator '.

    Also if I open Control Panel I can not open all programs-ex firewall windows etc.

    I saved the front register CC Cleaner cleaned but restore it makes no difference. Try and find the XP Media and attempt a repair. All this before and know a correction that could save me a lot of time?

    Any suggestions would be greatly appreciated!

    Hi John,.

    You can then create a new profile for the user by the listed method: http://support.microsoft.com/kb/279783

    and copy the data using the index method: http://support.microsoft.com/kb/811151

    When you sign in as an administrator, you can rename your existing profile

    C:\Document and settings\

    Rename as desired. Now restart your pc and you connect with your normal login account.

    It will recreate a user profile with the same identifier. Now refer http://support.microsoft.com/kb/811151 and copy data from the renamed account of this new profile, would be easy.

    I hope this helps.

  • After the abduction of a trojan virus, I still have no internet access

    After the abduction of a trojan virus, I still have no internet access with Internet explorer, Google Earth, or Yahoo Messenger. Attempt to update Yahoo Messenger from a download of update, a message indicates "Yahoo Messenger is unable to download files needed for installation. Please check the firewall settings and try again. It does not matter whether or not the firewall is disabled. Yahoo Messenger is able to connect, but not to show me the list of the rooms in the right panel. Firefox still works fine and all I use.

    Here are a few things to check after an infection or elimination:

    We will check your network connection properties.

    Some malware will alter these settings and your anti malware software can't tell if you have changed the malware changed them or so, after removal of infections, it will leave just the settings as he finds them (it is usually a good thing), but can leave your disabled Internet access.

    Click Start, run and enter in the box:

    Inetcpl.cpl

    Click OK to launch the Internet Properties Control Panel, choose connections, LANsettings.

    Or, in Internet Explorer click on tools, Options, connections, LAN settings.

    These settings control your Internet access for all browsers.

    (If you make settings, write them down so you can undo changes if you must)

    On most environments, not independent, there will be check automatically detect settings and the other boxes are (as Proxy Server) is disabled.

    Automatically detect the setting checked =
    Use the automatic configuration script = unchecked
    Use a proxy server for your LAN = not checked

    Make changes, then click OK, OK to save the settings.

    Check your settings for how your network adapter gets its IP and DNS settings.  On most home systems, these parameters must be defined for the system will get the settings automatically.

    If you have another system on your network that works, you can compare these settings with the settings of the system which is not a work and make adjustments.

    Click Start, settings, Control Panel, network connections, and then select your current network connection.

    On the general tab, click Properties.

    In the drop down in the Middle, find and highlight the selection of Internet Protocol (TCP/IP) and click Properties.

    In the Internet Protocol Properties window, the usual selections are to get the IP and DNS settings automatically.  Select the following two options:

    Obtain an IP address automatically
    Get a DNS server address automatically

    The rest of the options on the screen should then be grayed out/not available.

    Make changes, then click OK, OK to save the settings.

    Restart your computer and test your connection.

    If it still does not work, check your settings are still in place after a restart and then release and renewal IP of your network device configuration settings.

    Click Start, run and enter in the box:

    cmd

    Click OK to open a command prompt window, and then type the following commands:

    ipconfig/release

    ipconfig / renew

    output

    Restart your computer and test your connection.

    Download, install, update and do a full scan with these free malware detection programs can solve any problems:

    Malwarebytes (MMFA): http://malwarebytes.org/

    SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

    It can be uninstalled later if you wish.

    Do, or do not. There is no test.

    I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

  • After the attack of virus cannot activate Windows Firewall

    Something has attacked our copmputer. We have done several virus scans to correct the problem, but we cannot yet turn on the firewall on, what can be the problem?

    Hello

    If you need search malware here's my recommendations - they will allow you to
    scrutiny and the withdrawal without ending up with a load of spyware programs running
    resident who can cause as many questions as the malware and may be more difficult to detect as the
    cause.

    No one program cannot be used to detect and remove any malware. Added that often easy
    to detect malicious software often comes with a much harder to detect and remove the payload. Then
    its best to be thorough than paying the high price later now too. Check with them to one
    extreme overkill point and then run the cleaning only when you are sure that the system is clean.

    It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
    the regular windows when you can.

    TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
    It will display all the infections in the report after you run - if it will not run changed the name of
    TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
    check with the other methods below.
    http://support.Kaspersky.com/viruses/solutions?QID=208280684

    Download malwarebytes and scan with it, run MRT and use scanners online and other methods.

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

    Malwarebytes - free
    http://www.Malwarebytes.org/products/malwarebytes_free

    SuperAntiSpyware Portable Scanner - free
    http://www.SUPERAntiSpyware.com/portablescanner.HTML?tag=SAS_HOMEPAGE

    AdwCleaner
    http://www.bleepingcomputer.com/download/adwcleaner/
    Run the malware removal tool from Microsoft

    Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

    You should get this tool and its updates via Windows updates - if necessary, you can
    Download it here.

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
    (Then run MRT as shown above.)

    Microsoft Malicious - 32-bit removal tool
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

    Microsoft Malicious removal tool - 64 bit
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

    Try the demo version of Hitman Pro:

    Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
    (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
    what you have done (such as antivirus, firewall, etc.).
    http://www.SurfRight.nl/en/hitmanpro

    --------------------------------------------------------

    If necessary here are some free online scanners to help the

    Microsoft safety scanner
    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Scan online ESET
    http://www.eset.com/onlinescan/

    Scan Kaspersky online
    http://www.Kaspersky.com/virusscanner

    Other tests free online
    http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

    --------------------------------------------------------

    After the removal of malicious programs:

    Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
    system files.

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run check disk in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    ======================================

    If necessary AFTER THAT you are sure that the machine is clean of any malware.

    How to do a repair installation to repair Windows 7
    http://www.SevenForums.com/tutorials/3413-repair-install.html

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • Try to connect to the wireless computer after freshly installed Windows says I am connected to the router, but I have no internet access

    Original title: connection problem

    Hello! I recently did a clean installation of Windows 7 Professional 64 bit and I use a wireless USB adapter. Windows says I am connected to the router, but I have no internet access, and I have this yellow on trinagle. Work of all my other Windows 7 PCs, but this one. Could someone help me? Thank you!

    Hello

    Welcome to the community forums of Microsoft and thanks for posting the question. I've surely you will help find a solution on the issue. I see that you are unable to connect to the wireless network after you perform a new installation.

    I suggest you to consult the steps described in the article:

    Method 1:

    You can try the steps in the link and check.

    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    You can update the driver of windows 7 on the manufacturer's Web site.

    Method 2:


    You can remove and re-create the wireless network connection, follow these steps:

    a. Click Start, type ncpa.cpl , and then press on Enter.
    b. right click on your wireless network connection and then click Properties.
    c. click the wireless networks tab.
    d. under preferred networks, click your Wireless
    network and then click on remove. e. click on view Wireless networks.
    f. under management of the network, click refresh the network list.
    g. under Choose a wireless network, click the wireless network to which you want to connect, and then click Connect.

    Method 3:
     

    If the steps above don't you can uninstall and reinstall the NIC drivers and check with the question.

    a. click on Start menu, in the Search tab type devmgmt.msc and press ENTER.

    b. right click on network adapters and click Uninstall and restart the computer.

    c. after rebooting, install network cards and check with the question.


    Method 4:

    You can temporarily disable the antivirus and firewall on the computer and see if it helps:
    Enable or disable Windows Firewall
    NOTE: Turn off Windows Firewall might make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers.
    You can see the following link to disable the Antivirus installed on your computer software.
     
    NOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks

    Please follow these recommended steps and post if you still experience the problem. I'd be happy to help you further.

  • After the last updates of windows have problems with start up and now drivers

    Hello

    After the last updates of windows have problems with start up and now drivers. I get an error code 21 when I try to install the drivers AMD apparently missing.

    May 14, last night I had several (automatically) downloaded windows update

    Today, I was unable to boot my computer with Windows - tried the disk check, start checks etc, and eventually had to use System Restore (for help before the critical update to restore).

    Perfection, everything works, but knowing that windows will attempt to redo an automatic update, tried to check online - no one seemed to have a problem and (naivly) thinking I could always do another restore of the system, I rebooted again.

    Same thing worse. Could not do a sys restore either just before restarting or last night. Chose a date earlier (last week) but then lost the USB drivers and pilots display. Downloaded updated but refuses to let my AMD driver install Windows I have a very unpleasant screen... and I must now stop the installation of this update "critical."

    Would appreciate advice how do my installed display driver or whether anyone else has problems following this update

    Thank you

    Hi Jane,

    You have a disk to install Windows 7 with you?

    I suggest you to check the event viewer for error details report.

    Open event viewer.

    http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

  • No sound after the removal of Norton and Mcaffe installation

    No sound after the removal of Norton and Mcaffe installation

    Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  • After the purchase, how much time have we download the application?

    After the purchase, how much time have we download the application?

    Hi Peggy,

    Download the product can be done immediately, however if you bought the subscription, you must wait to activate the product until the payment goes through, and the same goes for a perpetual license product once the payment goes through you will receive your serial number to activate the product.

    Kind regards

    Bani

Maybe you are looking for