Designjet 130NR problems

Similar Questions

• HP designJet 130nr: Spotlight on roller automatic power media must not enter.

  Hello

  I recently bought a HP designjet 130nr used large format, and I noticed that the lights on the Auto Roll power media does not illuminate after I turn on the printer.

  Can someone please?

  The tracer feeds on?  If that's the case then you may have a problem with the drive roller.  If you remove the roll and look down inside you'll see there's a torx screw that mounts to the part of the feed roller who has the power connector.  If you remove the screws (there may be two) and then remove the part you will see there are about 3 or 4 contacts mating when the part is being challenged.  Make sure that none of these contacts are irrelevant.  If the unit power ot on, then remove the parallel cable and the cable to the socket on the printer and plug the unit directly into the outlet. The unit now power on.  Keep in mind with this model when you plug in the cable that the light will Flash several times in front of the screen and the time of glass can turns on but then turns off.  When it fires on the front power button is pressed to turn on the machine.  If the light on the front does not blink a few times you may have a power supply problem.

• Re: HP Designjet 130nr... solved

  Hello

  I have problem my printer HP Designjet 130nr at each startup, it still shows 3 pages by aligning the test print heads.

  Thank you for your help

  Hello

  Thank you
  
  I replaced a cyan Printhead and now everything is back to normal. Now I have a hook to the right and finished leave waste.

  keff

• HP designjet 130nr: CARTRIDGE of black INK HP 130 NR

  Does anyone know how to get cardidges of ink for the HP designjet 130nr printer? It seems that any working on the market! All links will be very wellcome. Thank you.

  PROBLEM SOLVED! I found a supplier for Europe. Thanks a lot everyone.

• DesignJet 130nr: canvas print Designjet 130NR

  Print on canvas of sheet (13 x 19) on Designjet 130NR works very well. Called HP Support asking if there are 24 "canvas rolls that work. Told me and it makes sense, the tool can not handle the Cup fabric.

  Someone at - he found and printed successfully pre-cut large canvases for the 130NR? I've got a good big letter opener, but as anyone who uses the 130 know, it rejects easily paper cut perfectly.

  Thank you

  Marty

  Hello

  Strawberry is not really designed to cut the canvas. Is too thick

  You can still use it, but you will need to replace it more often.

  If your knife used to work, you may need to replace it now

  Here is the part number Q1292-60064 Media knife

• HP Designjet T120 - problem printing with drawings and renderings

  Hello

  My name is Rania and I run an Interior Design firm. Recently I replaced my 130NR with a T120 and after a few months of printing, I get what can be seen in the attached photos. Color brakes, good color bands, black color, where it is not supposed to be, etc. Someone had the same problem? Thanks a lot for your time looking at my post. Rania.

  

  

  

  This forum focuses on the level of consumer products.  For the Designjet you can have better results, post in the forum HP Designjet here.

• Designjet 130nr will not load any paper format any source

  Hi all

  I was running out of A1 posters and suddenly my printer wouldn't before hand feeding. I tried the paper infeed roller also bit it doesn't work.

  The printer comes essentially upward with the paper with an X if it and the icon of thumb on the display panel.

  It's as if he can't 'see' the paper.

  I cleaned in and around the printer, look for paper jams and ensured that I used the papers good condition.

  One thing I noticed, is that when it takes a roll of paper, it not there no "scan" light more. IIRC, there was before. Also the roll paper feeds out through the printer.

  Etc drivers seem well as he worked all day and no change in software

  Any help appreciated more

  Hello Alan.

  I'll assume a couple of things, please correct me if I'm wrong.

  -What feeding roll paper is detected by the printer and it feeds the paper to print the milling table.

  -transport of good position turns off and moves on paper.  Then paper jam icon appeared.

  This also occurs in feeding tray/feeder manual.

  I saw your other post and yes it can be the black plastic that is bound if the above is correct. There is a lens cap with a small hook under the carriage and the hook connects to the plastic piece to open the lid. With the lid open the sensor line can see the edges of the paper. It might be that your printer has problem with this lens cover opening.

  Solution: If you take the trolley to the left, you can see the hook on the right side, I think. You can leave the lid as it goes and then carefully detach the cover. The printer should work fine without it.

• Designjet 130nr: lines blue horizontal 130nr

  When I try to print a detailed plan of a PDF file, I get the blue horizontal lines or Cyan.

  Changed the magenta cyan and lite lite. Everything seems fine now.
  Thank you

• Designjet 130nr: designjet 130 nr used power up

  It's been a few days I used the machine. When I didn't hit power button / stop no response. I unplugged the power cord for 30 seconds plugged back in. it turned on but no info is showed in the display screen. I was able to start a print job, but the judgment of the printer in the workplace. Yet once I unplugged the machine. waited a minute and printer plugged in back on again and finished the print job. now its completely dead. I tried to unplug and plug in with no change. Help!

  Maybe all of the front panel has gone bad.  Just a guess.  C7796-60208

• Designjet 110plus mac OS 10.9.3

  I can't get my 110plus print Mac OS 10.9.3. The window defaults to USE 'Generic PCL Printer'.

  In the configuration of the printer, I don't see a driver for 110plus nr, but I do not see "hp designjet 130nr. If I set up a printer that is named "HP designjet 110plus (C7796D)" and choose to USE 130nr then, so far, the printer looks like printing normally. Is this a good solution or there at - it problems on the road?

  HP will be issueing a update driver 110plus 10.9.3 and same 10.10 Yosemite over time?

  Thank you

  P.S. This thread has been moved to printers Designjet Macintosh compatible products. -Hp moderator of the Forum

  Hello

  The last driver that was released for mac was for OS 10.8.

  I don't think that there will be an update of the driver.

  What you can do is download the driver Package Apple on your mac and install the printer in the same way that you do.

  The use of the driver for the 130 is a good workaround, you shouldn't have any problems with it

  You can still use the old drivers on the new os.

  Best regards

  Mike G

• 130NR HPDesignjet print is no longer the PDF correctly

  For some reason my printer large format Designjet 130nr no longers does print a PDF file correctly in Acrobat.  I am trying to print a 24 "x 36", architectural drawing (Arch D) PDF, but not matter how many different combinations of the page set up and print settings window that I use, it only prints what would be on a 8 1/2 "x 11". "   "" It does not fit the drawing down to a 8 1/2 "x 11", print only what would be in an 8 1/2 "x 11" window on the sheet.  I'm on a mac running snow leopard 10.6.7, don't know if this changes anything.  Thanks in advance!

  -Chris

  All Adobe Reader software, even in libraries, and then reinstall Adobe Reader X.

  An alternative is to use only an excerpt.

• HP Designjet EDP cannot be loaded in PS CS5 (cannot choose the paper type)

  In Photoshop CS4, we used to be able to use HP PDE to choose among other things, the types of paper.  In Photoshop CS5, we get the error:

  "The bundle"hp_designjet_pde"could not be loaded because it does not contain a version for the current architecture.  Contact the author of the package listed here for the most recent version.  HP designjet PDE v4.1.0.

  BDP works fine in Illustrator and other applications, CS5, Photoshop just not.

  This forum works Design Premium CS5 on OS X Snow Leopard with a HP DesignJet 130nr.

  No idea why this is happening or how to get Photoshop CS5 to recognize the HP drivers?

  Thank you!

  Because you are in Photoshop in 64-bit, and the printer driver is not code for 64-bit (the current architecture).

  You can run Photoshop in 32 bits, or contact HP and see if they have updated drivers.

• HP Designjet 500 42: Old problem of driver update

  Hello

  I have HP Designjet 500 printer 42 in. And I can't update the old drivers. I downloaded new drivers drivers

  Installed new drivers and the printer connected to the computer. Installed printer itself. Driver version but check it shows in 6.08 (preferably printer-> subject) window.

  I deleted all drivers using pnputil.exe d Oem # .inf and printui/s/T2 orders. All the drivers of HP has been removed from

  C:\Windows\System32\DriverStore\FileRepository

  and

  C:\Windows\System32\spool\drivers\x64\3

  Installed new drivers (8.10) and pluged in the printer. Printer has been installed but with drivers 6.08. So I went to the "print management" as an administrator. Pressed on HP Designjet 500 42 by HP printer 'Manage sharing'-> "Advansed"-> "New driver"-> 'Disc' and in C:\Windows\System32\DriverStore\FileRepository I chose "dsgj510.inf_amd64_* *" folder and the dsgj510.inf file here. But could not find "HP Designjet 500 printer 42 in.". Here only:

  HP Designjet 500 42 + HPGL2 card; HP Designjet 500 plus 42; HP Designjet 500ps plus 42; HP Designjet 500PS42 + HPGL2 card; HP Designjet 510 42 inch printer and HP Designjet 510ps 42-inch printer.

  I tried to use HP Designjet 500 42 + HPGL2 card HP Designjet 500 plus 42 drivers. But printer would give an error message and do not print.

  With the help of the 6.08 driver version I can print from some software, but I need to print from AutoCAD. And AutoCAD gives me the error message "no: cannot use this configuration of tracer for one of the following reasons: the driver is not found, cannot find the device or the driver has a problem." No device has been substituted. "And I can't choose the HP designjet 500 printer in AutoCAD.

  It is a shared printer and other computers on the network have 8.10 drivers and can print from AutoCAD. Single computer, the printer is pluged cannot print because it driver 6.08.

  I found the problem.

  On the page under 10 64-bit windows this is only "HP Designjet 500 and 510 HP-GL/2 and HP RTL driver 64 bit" 8.10 drivers. And this driver is not HP Designjet 500 printer 42-inch drivers. But under 64-bit windows 8, here's two pilots. "Driver HP DesignJet 500 PCL3GUI 64-bit" 8.10 drivers and same as above. This file have drivers for HP Designjet 500 printer 42 inches and runs under windows 10.

  If HP support lazy to put all work them drivers under windows 10 for HP Designjet 500 printer.

• HP Designjet T2300 PS printer: HP Designjet T2300 gas station problems

  I work for a small engineering firm. We have owned a large scale printer Postscript HP Designjet T2300 plotter for about five years. We rarely have problems with it, but a few days ago, we started to have problems with the service stations of the tracer. Whenever we turn the plotter hear us a loud clicking noise coming from the area of the station.

  We initially received error code 21.2:13. I contacted HP support and they had me run diagnostics on the service station. They returned with the error code of 21:13. I was told that I needed to replace the service station.

  I disassembled the side cover right to access the service station. When you turn on the plotter, as it has gas carrier station inializes goes ahead all the way and continues to click. I got out the service station Assembly and disassemble to see if I could fix it. Badly cleaned ink necessary spittoon & one of the metal clips used to stop the carrier to move too far to the front had popped out.

  I've cleaned all the ink level and I replaced the clip. I reassembled the Assembly and reinstalled in the plotter. After the reboot, I can still hear the rattling noise. The motor that moves the carriage of station service before doesn't seem to work properly. It does not stop when it reached the front of the gas station. She continues to advance the carrier and click on gears.

  Is there a sensor or something built that is supposed to stop the carrier to service station when it is moved to the front as it has supposed to go? Is my only option to replace the entire service station?

  Thank you!

  Hello

  If there is a click on the service station, provided is because a part broke.

  Your best option is to replace the part number

  CH538-67040 gas station - includes the fall detector and the spittoon of station service

• Designjet 111 roll: problem with Hp designjet 111 roll

  Hello

  I have problem with Designjet 111 roll. I reinstalled the driver delivered with CD, and the most recent Web site and the effect is always the same. When I enter the Properties window, I see this:

  

  There is no chance to put anything. How can I solve this?

  Hello

  The System Maintenance Utility will not be related to a problem with the printer driver.

  Have you deleted the driver as explained on the following doc?

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-bpp03332