Try to connect to the wireless computer after freshly installed Windows says I am connected to the router, but I have no internet access

Similar Questions

• Error after fresh install Windows XP Pro Service Pack 3: you may be unable to access the Windows Update site... If these versions of Windows are not updated with the latest Service Pack

  I tried that at this link:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/error-after-fresh-install-of-Windows-XP-Pro/a617bb44-9944-4338-b82e-c18372ad986f?page=4&TM=1313954410562

  In particular, I tried everything (except #7-la destruction - because I just destroyed yesterday... LOL)

  1 reset
  2 Run Installer Windows Update Agent method 1 here: http://support.microsoft.com/kb/943144
  3 run the difficulty of method 2 here: http://support.microsoft.com/kb/943144
  4 run the difficulty from here: http://support.microsoft.com/kb/971058
  5 reset
  6 try Windows Update
  7 if it does not, repeat steps 1-6 before using your preferred method of destruction of the computer.

  I have a completely fresh installation. I reformatted yesterday installed the operating system, which comes with 3 SP.

  I used the Dell site to get the rest of my drivers and then began the process of trying to update. Immediately, I got the error above.

  According to that link above, 'FinnGange @ & anyone else having a similar problem: to avoid confusion, please start your own, new thread on YOUR specific problem and your computer. " Indicate your current version of IE, and the full version of Windows.

  So, here is my new thread! :)

  I am running XP Pro 2002 SP3 and IE8

  Please help me with this problem.

  Thank you

  Kris

  2 Run Installer Windows Update Agent method 1 here: http://support.microsoft.com/kb/943144

  If you go to that page and made scroll to Method1, you will see there are three installers. Which did you use?

  Also, what is the make, model and model number of your PC? Is your Windows XP 32-bit or 64-bit?

  Did reboot you after you run the Update Agent Installer?

  Dump you all your IE8 temporary Internet files and cookies?

• WUMC710 connected to the router, but can not see internet

  My media WUMC710 connector on my router Netgear Nighthawk AC1900 double band on the first try.  Can see the MAC address in the connected devices list when you are connected to the router.  However, the devices connected to the WUMC710 cannot connect to the internet.  Tried TV, Blue-Ray and laptop.  All other devices on the wireless network properly.

  What is the problem?

  Fixed a problem with the update of the firmware of the router.  WUMC710 works great!

• Windows Vista wireless connects but I have no internet access in Internet Explorer or Google Chrome.

  Hi everyone who wants to help me entered the passphrase for the wireless, everything seems fine, until I have try to go on ie or google chrome and any other browser that I have, which could materialize this project? Thank you

  original title: can not go on web browser

  Right-click on the network icon in the taskbar and choose troubleshoot internet connection and see if it shows anything. If this din't work, then try to contact your Internet service provider, they might need some settings you will need to reconfigure with new router like proxy or static IP.

• HP 15 ac-120tx: chipset Wifi not detected after fresh install windows 8.1

  After a new installation of Windows 8.1 it does not detect the wifi chipset. Registration in the other devices category in Device Manager is network controller. Tried to install this driver: http://ftp.hp.com/pub/softpaq/sp73001-73500/sp73310.exe but does not also because it still does not recognize the wifi. LAN Ethernet is only show in network adapters.

  The network controller PNP device ID is:

  PCI\VEN_10EC & DEV_B723 & SUBSYS_804C103C & REV_00\4 & 1E830894 & 0 & 00E5

  Need help please?

  Hello:

  Looking for the hardware revision of the wireless card that your laptop is a newer version of the driver than 2014.

  This package contains the installation package driver for the controller wireless LAN Realtek RTL8723BE/RTL8188EE in the laptop models running a supported operating system.

  File name: sp72932.exe

  Your laptop is not supported by HP for W8.1.

  However, you should be able to use the W8.1 drivers and software ac000-15 t on your model, except the BIOS and firmware files.

  http://support.HP.com/us-en/drivers/selfservice/HP-15-ac000-notebook-PC-series/7771404/model/8381866

• Vista connects to my router, but for local access only.

  I am running windows home edition vista 32 bit on my laptop and until today I had no problems with my internet connection.  I've updated my norton 360 today and had no problems until I rebooted a few hours later.  I can connect to my router but it gives me local access only.  My Linux Ubuntu 10.4 and Mac OS X system is running to the same router with no problems.

  What can I do to connect my Vista laptop to internet?

  So I got on my windows to try what you say and guess what. -_ - (indifferent face) my vista decided to take my wireless and give me access to the internet after most of the month.  I don't know what happened.  I didn't have anything new in the last three days... It's fixed now, but I still don't know what it does break.  Any ideas as what caused it?

• I have a Wireless N card and the router, but only to connect to wireless-G speeds

  I just got a new HP DV7T with a N (with bluetooth) wireless card: Intel Centrino Advanced - N 6200 AGN

  I use a Netgear wireless router (WNDR3700) double radio.

  My wife's cell phone can connect to the router with a N Wireless card at a speed of 170 Mbps.

  My laptop can connect only to 54 Mbps. I checked that I am connected to radio N of my router (the radio of G/B/A has a separate connection).

  I found a useful post here:

  http://h30434.www3.HP.com/T5/wireless-Internet-and-home/wireless-does-not-seem-to-connect-at-802-11n...

  I followed the advice of responses and checked all the settings of the router (but the success of my wife to connect at speeds N essentially rules on the router) and checked the settings of the adapter to make sure it helped N.

  I wonder what it is that I'm missing. Any suggestions would be greatly appreciated.

  Thank you.

  I was able to determine the problem after extensive web searches.

  I was using the WPA-TKIP authentication which, in some cases, prevents the speed N Wireless.

  Once I changed WPA2-AES authentication radio N I got immediately 300Mps speeds and it varies between 240-300Mbps now.

  I hope this will help others with the same question!

• Wireless cause: the network connection from the laptop to the router, but internet access comes and goes through procedures to 'fix '.

  The Dell laptop I bought is little used, not refurbished a downsizing Corporation.  I bought a refurbished by Cisco, Cisco Linksys router.  I can't stay on the internet for any period of time.  At the time that I open the browser, after the wireless connection, it goes your 'connected' to 'no internet access.  If I go through the diagnosis and fix it, it says I'm connected, but 'no Internet' returns quickly.  It shows a diagram of the connectivity of the laptop to the router but not to the internet router.  I had a second router refurb sent, and it does the same thing.

  This is all new to me (wireless and mobile), so my words my being turned off, but I wonder if it might be the wireless card, or network card (or is it just a different name for the router).  I mean, it's something in the laptop.  If I plug the DSL directly into the laptop, I have a perfect internet connection, so I did not thing is my provider.

  Any help/suggestions appreciated!

  My issue was with the ATT modem not set to fill mode.  modem was not accept what he said was the router.

• legality of the use of vista software to another computer after upgade to windows vista

  legality of the use of vista software to another computer after upgade from vista to windowslegality the software vista to another computer after upgade to windowslegality vista software vista to another computer after upgade to windows vista

  legality of the use of vista software to another computer after upgade from vista to windowslegality the software vista to another computer after upgade to windowslegality vista software vista to another computer after upgade to windows vista

  Hey rjmhhar

  If you use a license of operating system vista as part of an upgrade, it is related to the new upgrade license

  You can use it NOT then install vista on another computer when it is used in the installation as part of this upgrade

  Walter, the time zone traveller

• When you try to connect to my router using the IP address, he continues to ask for a password of windows security.

  When you try to connect to my router using the IP address, he continues to ask for a password of windows security.  I don't know what it is, I tried recording with every combination I can think.  Can anyone help?

  If you do not know the password of the router, then chances are good that you will need to reset it to the factory settings. Google your model and you should be able to find the instructions.

  I hope this helps.

• Win7 64 bit, connects to the router, but no error internet access-"page not found".

  Original title: Win7 64 bit, connects to the router but no internet access.

  Help! Windows 7, XP Home Edition Premium, 64 bit, connects to the router and I can access the network. However, I can't access the internet. PC was working fine until a few days when I was using IE Explorer and I suddenly got the error "page not found". This pc internet connection uses the onboard network controller. I rebooted the pc and used the option "safe mode with network. The pc worked fine and I had access to the internet. I restarted the pc and still no access. I tried a usb wireless adapter. No luck. I have not installed updates or software recently. My other 2 PC works fine. I tried to use the network troubleshooter and he could not find any problems.

  Hello

  1. Have you made changes on the computer before this problem?
  2. What antivirus application do you use?

  I suggest you try these methods and check the status of the issue.

  Method 1:

  Keep the computer in a clean boot and check the status of the issue. If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem. Continue with the remaining steps to pin-point on the third party service. After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7.

  http://support.Microsoft.com/kb/929135

  Note: Please go up to step 7 of the Kb to maintain the computer to a normal startup after you fix the problem

  Method 2:

  I would suggest trying the following steps and check the status of the question.

  a. open Internet explorer.

  b. click on tools, then on Internet options.

  c. click on the Connections tab.

  d. click on LAN settings.

  e. uncheck the option use a proxy server for your LAN .

  f. save the changes by clicking on apply and ok.

  Method 3:

  Configure Internet Explorer to disable simplified HTTP error messages and check the status of the issue.

  a. on the Tools menu, click Internet Options.
   
  b. on the Advanced tab, in the browsing section, disable friendly HTTP error messages display check box and then click OK.

  c. close Internet Explorer.

  d. restart Internet explorer and check the status of the issue.

• After the abduction of a trojan virus, I still have no internet access

  After the abduction of a trojan virus, I still have no internet access with Internet explorer, Google Earth, or Yahoo Messenger. Attempt to update Yahoo Messenger from a download of update, a message indicates "Yahoo Messenger is unable to download files needed for installation. Please check the firewall settings and try again. It does not matter whether or not the firewall is disabled. Yahoo Messenger is able to connect, but not to show me the list of the rooms in the right panel. Firefox still works fine and all I use.

  Here are a few things to check after an infection or elimination:

  We will check your network connection properties.

  Some malware will alter these settings and your anti malware software can't tell if you have changed the malware changed them or so, after removal of infections, it will leave just the settings as he finds them (it is usually a good thing), but can leave your disabled Internet access.

  Click Start, run and enter in the box:

  Inetcpl.cpl

  Click OK to launch the Internet Properties Control Panel, choose connections, LANsettings.

  Or, in Internet Explorer click on tools, Options, connections, LAN settings.

  These settings control your Internet access for all browsers.

  (If you make settings, write them down so you can undo changes if you must)

  On most environments, not independent, there will be check automatically detect settings and the other boxes are (as Proxy Server) is disabled.

  Automatically detect the setting checked =
  Use the automatic configuration script = unchecked
  Use a proxy server for your LAN = not checked

  Make changes, then click OK, OK to save the settings.

  Check your settings for how your network adapter gets its IP and DNS settings.  On most home systems, these parameters must be defined for the system will get the settings automatically.

  If you have another system on your network that works, you can compare these settings with the settings of the system which is not a work and make adjustments.

  Click Start, settings, Control Panel, network connections, and then select your current network connection.

  On the general tab, click Properties.

  In the drop down in the Middle, find and highlight the selection of Internet Protocol (TCP/IP) and click Properties.

  In the Internet Protocol Properties window, the usual selections are to get the IP and DNS settings automatically.  Select the following two options:

  Obtain an IP address automatically
  Get a DNS server address automatically

  The rest of the options on the screen should then be grayed out/not available.

  Make changes, then click OK, OK to save the settings.

  Restart your computer and test your connection.

  If it still does not work, check your settings are still in place after a restart and then release and renewal IP of your network device configuration settings.

  Click Start, run and enter in the box:

  cmd

  Click OK to open a command prompt window, and then type the following commands:

  ipconfig/release

  ipconfig / renew

  output

  Restart your computer and test your connection.

  Download, install, update and do a full scan with these free malware detection programs can solve any problems:

  Malwarebytes (MMFA): http://malwarebytes.org/

  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  It can be uninstalled later if you wish.

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• My wireless connection status shows that I am connected but I did "no internet access.

  Original title: internet connected but shows "no internet access" why?

  I have a gateway laptop and everything suddenly I can't access the internet.  My wireless connections shows that I am connected but I did "no internet access?  I tried to disconnect and reconnect, but that has not worked.  I tried troubleshooting and it says there is a problem connecting with my modem, but it is impossible because all other computers cell phones/Ipod work correctly on the same connection.  Can anyone help?

  Renee

  Hello

  You did changes to the computer before the show?

  I suggest you follow these methods and check.

  Method 1: Remove all the wireless networks, listed in the network and sharing Center.

  1. click Start and select Control Panel.

  2. open the network and sharing Center.

  3. click on manage wireless networks.

  4 remove all wireless network listed in this list.

  5 restart the computer.

  Select your wireless network and connect (if course, enter your password). Check if you see exclamation of yellow color on the bar strength wireless connection.

  If the method above does not work, proceed to the next method.

  Method 2: I suggest you try the steps from the following link.

  Wi - Fi and in Windows network connection issues.
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  If the method above does not work, proceed to the next method.

   
  Method 3: Reset the TCP/IP stack.
  
  To reset the stack TCP/IP go to this article and either click on "Fix it for me" or follow the instructions to fix it yourself: http://support.microsoft.com/kb/299357 .
  If the same problem still persists, then try the next method.

  Method 4: Perform the steps from the link to set up a new wireless connection.

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  I hope this helps!

• Laptop HP G70 connection to the router but not the internet

  I have a laptop HP G70 running windows 7, I got a new router installed. My computer to the router, but not to the internet links. I tried the software updates for my drivers running, doing all used to end router for example change etc channel/parameters/IP wifi. I tried to turn off the wireless, reset the router and re enabling it does not work.

  It will connect to the internet ethernet of nis.

  My laptop connects fine with other networks if it is not wireless.

  All other devices are connected to the router.

  Please help this is extremely frustrating.

  You are the very welcome.

  I compressed the file and downloaded on my Skydrive account, which I shared the link below.

  Download, unzip and run the file called sp54972.

  https://onedrive.live.com/redir?RESID=832F4957D2E51B93! 263 & authkey =! AEOhdjA3QVhETy0 & ithint = % 2czip

• When I try to burn a movie, my computer shuts down. This didn't happen with more short films, but this one is about 84 minutes.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  When I try to burn a movie with videos imported from different sources, the computer shuts down after 10 minutes.

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  limespider wrote:
  When I try to burn a movie, my computer shuts down. This
  didn't happen with more short films, but this one is all
  84 minutes.
  =======================================
  Sounds lke a question of system resources.

  Large, complex projects can cause problems... it can
  be worth a try to create several small projects and save
  each of them in the format .wmv movie to a folder on your hard drive
  drive. When you import clips .wmv collection in DVD
  Machine to each of them becomes a scene (chapter)... you can
  have up to 18 scenes.

  Besides rendering video is time CPU and could
  initially be an overheating problem that could also result in your
  computer to close.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.