After the class, book in a book problems

Similar Questions

• After the last updates of windows have problems with start up and now drivers

  Hello

  After the last updates of windows have problems with start up and now drivers. I get an error code 21 when I try to install the drivers AMD apparently missing.

  May 14, last night I had several (automatically) downloaded windows update

  Today, I was unable to boot my computer with Windows - tried the disk check, start checks etc, and eventually had to use System Restore (for help before the critical update to restore).

  Perfection, everything works, but knowing that windows will attempt to redo an automatic update, tried to check online - no one seemed to have a problem and (naivly) thinking I could always do another restore of the system, I rebooted again.

  Same thing worse. Could not do a sys restore either just before restarting or last night. Chose a date earlier (last week) but then lost the USB drivers and pilots display. Downloaded updated but refuses to let my AMD driver install Windows I have a very unpleasant screen... and I must now stop the installation of this update "critical."

  Would appreciate advice how do my installed display driver or whether anyone else has problems following this update

  Thank you

  Hi Jane,

  You have a disk to install Windows 7 with you?

  I suggest you to check the event viewer for error details report.

  Open event viewer.

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

• Display after the XP service pack 2 update problem

  I installed the XP 2 service (Xp pro) on my Satellite Pro 2100 and since I was on the right side of the screen a black border that is not used about 2 cm wide.

  Is the same reported problem of pLippo (17-Sep-04 22:53) with the same subject.

  This problem prevents me to install SP2, can anyone help?

  Thanks in advance.

  Enzo

  Hi Enzo,

  in a first time, you must uninstall and update your display driver.

  I thik this helps because "gfan" had the same problem with a laptop computer and reinstalling solved the problem!

  Antoni Bye

• Cannot complete the order after the iPhone booking 7 during the pre-order?

  Not sure if this is the appropriate place to ask... but did anyone encounter this problem with their iPhone 7 pre-order?

  After that I tried to place an order for the iPhone 7 more during the pre-order, I received an email from the Apple Store saying that my iPhone had been reserved and provided me with a reservation number. They said that they send an email when they were able to reach the carrier systems so I could place my order. Very quickly after I got a follow-up email confirming the booking number and was told that I could now go ahead and place my order. I have connected to the Apple Store, who acknowledged my reservation number, almost all of the screens orders went through, but when I hit continue to confirm the pricing plan that I had selected, the next screen shows the page of 'the page you are looking for is not found' dreaded.

  E-mail with the reservation told me that I don't have that until 4 PM PDT 9/10 to complete this order. Everyone knows this! I tried through the app store of Apple, Safari, and Chrome... and always get the same question. I've been on hold with Apple now for 45 minutes trying to get through, and they don't take chat requests. I'm so frustrated! Help!

  The site is probably hammered with requests for pre-order. I'll try again later if I were you.

• Backup of the address book problem

  I have been using Apple AddressBook since its launch. I recently started having problems with good backup. Normally, I backup every day, and it's really quick like less than a minute. The last few weeks it takes "forever" at the end of backup. I can do other things while AB is the support up and finish that takes me an hour or more and it is not always done. I tried a few times to just stop smoking it and then there is '0' for the size of the file or it ends really huge. If I let it go until it ends it is 'normal size' as it used to be when it took less than a minute for the backup. Any ideas?

  You only back up address book or you back up all your data? How do you back up?

• After the upgrade to El Capitan having problems with the application Mail

  Hello:

  Recently upgraded my Mac mini to El Capitan. Before the upgrade (from Mountain Lion), I got Thunderbird mail application works perfectly access my GMail account and my Hotmail account. Now, I have no problem with Hotmail and Gmail keeps asking for the password to connect to the gmail imap server. I have TBird in my laptop Ubuntu Linux and Windows too and that you have not had any problems like that. Any help to solve this problem is appreciated. Thank you.

  Try this: https://support.google.com/accounts/troubleshooter/3178296?hl=en

• After the OS and IOS updates SMS problems

  I recently updated to IOS 9.3 and OS x 10.11.4. Since these updates, I had difficulties to send SMS.  iMessages forward vigorously. But I often get errors failure-to-send three and four times in a row when trying to send an SMS message longer than one short sentence. NOTE: I'm announcing this issue in section OS X El Capitan, but this applies to generated no SMS messages only on my iMac, but also on my iPhone 6 and iPad Air2, with 9.3 updated IOS updated.

  I have friends with non-Apple devices I have text frequently. Before the latest updates, my SMS messages would pass them quickly. Not now.  I don't know how to make Apple aware of this situation. I sent a direct message to @AppleSupport on Twitter. Not sure how that will be effective.

  Does anyone else have this problem?

  Note to moderators: don't know where this question from the list. Please go to the Board. Thank you.

  Hello

  Make sure the iPhone is on the same network local (he will exploit Wifi)

  Check the settings of text transfer.

  If everything looks OK, but it does not reset the text Forwarding (turn it off for a few moments and then On Again to generate and new Code on the Mac).

  

  22:00 Monday. March 28, 2016

   iMac 2.5 Ghz i5 2011 (El Capitan)
   G4/1GhzDual MDD (Leopard 10.5.8)
   MacBookPro (Snow Leopard 10.6.8) 2 GB
   Mac OS X (10.6.8).
   a few iPhones and an iPad

• After the upgrade to Windows 7 wireless problem

  Hello

  I just upgraded my G70-460US to Windows 7 and everything was going smoothly until I realized that the integrated wireless LAN does not connect to my router. Whenever I try to connect, I get the message "Windows could not connect to . It's weird because everything works fine; Device Manager shows no problems, works of LAN cable, I can turn the WLAN with the button next to the power, I can see the list of available networks and so on. What is even more strange is that my router is currently without WPA or WEP, and again, I get the same message "Windows was unable to...» ».

  So far I have tried:

  -Uninstall the driver for Atheros AR5009, reboot, and reinstall

  -Support of Windows Update to get the latest drivers

  -Check if my router (Microsoft MN - 700) is supported by Windows 7, which it does not match the Microsoft Win 7 Compatibility Center

  -Check if my router is not broken (can connect wireless to my other computer so it is not broken)

  -Reset the router to the factory settings

  -Affecting the security of WPA - PSK, WEP network and secure (message all went the same "Windows was unable to...") »)

  -Uninstall HP Wireless Assistant

  It is an upgrade from Vista Home Premium to 7 Home Premium via the disks to upgrade HP G70-460US. I think there is a problem with the autoconfiguration WLAN service, but I'm not expert enough to dig in. All advice is appreciated.

  Thank you

  vdfsi

  Wow, amazing... this topic saved my day. The new driver to the link did the trick.

  I don't know why HP is not register this driver on their G70-460US page. The disc 'Upgrade HP Manager' provided with the Windows 7 upgrade disk should have updated all the drivers, but that doesn't seem to be for my case.

  In any case, thanks to ken2010 and Daniel_Potyrala.

  vdfsi

• Broadcasting subtitles/captions position changes after the backup. subtitle, first pro cc problem

  Hello

  I'm working on first pro CC 2015.3.

  I put subtitles on my support.

  I choose to put down to the center using the small box (with 9 positions) but when I save the file, subtitltes position change a bit and they are no more in the Center. Sometimes a small portion of the text is off the screen.

  THX (and sorry for my English)

  Hello

  I work on first pro 2015 cc.3

  I added sub titles on my video.

  I put some money down en title centered to the screen with the help of the box with 9 automatic positions.

  At the beginning it works and when I save and reopen the file, the sub titles have moved and are are shifted. Some of the text is even outside the screen.

  Thank you for your help.

  Hello

  I got the solution. It is resolution safe or secure portal.

  I put the solution if anyone ever need.

  Your captions or subtitles may not exceed your security door or gate ground track. You need to reduce the font size or move to another line to shorten. Because first changes automatically position if it s more limit.

  However, if you want to be on these limits (ground/door chest) you can set with the scale and the effect of the track position.

  Hello again I found the solution.

  Solution alone, I share you although I think qe I must be the only jerk for not thinking about it.

  The problem comes from the ground and safe door car first pro will automatically substitute the captioning at best pour in stay standards.

  Possible solutions

  -in the absence of strike reduced the size of the

  -make line breaks.

  -Play with the scale effect parameters and positions of the captioning.

• problem 1-200 after the migration to a new comp. problem at the opening of the Muse

  Hello

  Ive just migrated my old imac10.6.8 to a version of imac10.8.2.

  In my old computer wasn't there a problem with my creative cloud including the Muse programs.

  But now if I am using the Muse on my new computer, he says: "the 1-200 problem, try again later."

  IndesignCS6 however seems to work very well. I didn ' tested others yet...

  Your time is much appreciated. Thank you very much...

  Lucien

  ---------------------

  -reallly guys... more than 60 views and no responses yet...;-(makes me a little sad...)

  The error message is:

  -"An unexpected error has occurred. Please try again later... »

  Who can help me?

  Thanks in advance...

  Lucien

  Please delete the "opm.db" file found in:

  / Library/Application Support/Adobe/OOBE

  Note the built-in Mac file search functions and Windows will not detect hidden files or folders. If you are not familiar with how to navigate to folders/files hidden on your computer:

  Use the "Go to folder" item in the "Go" in the Finder menu and enter "~/Library/Application Support/Adobe/OOBE" (without the quotes). Delete the file opm.db.

• GoPro Hero 4 files after the conversion of position of playhead - problem with CS6 - wrong numbers

  Hello

  I have this kind of mistake in CS6 on Win7 with Gopro Hero 4 black converted files. Other files works fine, sometimes with converted (camera hero4) olny files on Gopro Studio

  Someone knows how to fix this?

  Thank you

  Przemek

  

  In preferences/media Timecode Start value to the 00.00.00.00.

• After the installation of shapes with connection problem as sysdba

  Hi all
  
  I had the installation of Oracle Database 10 g on my machine(*Windows XP) *. I was able to access my DBs as SYS with cmd using SQLPLUS before I installed Oracle Forms and reports 6i. My installation of the database lies in D:\Oracle and forms in c:\Orant. Now, every time I start cmd and type sqlplus /nolog a new cmd window opens. If I try to connect as SYS it gives me error "insufficient privileges" but I connect as system and other users.
  I don't understand why this is happening. Can someone explain to me please the possible reason?
  
  Thanks in advance.
  Concerning

  You're right, same thing happening. The sqlplus out 8.0.6.0.0
  How to substitute forms sqlplus with sqlplus database?

  You can do separate setting ORACLE_HOME and path. Set ORACLE_HOME to be the database of home server. Also you have to reset the path variable, because this executable variable list in the order for example if your path is set to c:\orant\bin;...c:\oracle\product\10.1.0\Client_1\BIN then sqlplus in the first folder will not be from the second. To fire the second folder you must reset the path to make the second become first in the order.

  Thank you.

• Save the InDesign book

  I have a book file that uses InDesign 4. He has 19 chapters (380 pages). I kept him in ID4 because it was a revision for a second printing, 16 months after the original book has been created. I was worried to open it in a newer version 5 ID I have on another computer (have 5.5 install) due to a possible formatting problems.

  OK overhaul, pdf out of the editor.  Now I want to save it on another HDD to the back and another hard drive to open it in a new version of the code.  The problem is that it will not save the current book with chapters revised anywhere.  The chapters don't record the date current changes! But the changes are there as long as I don't have to copy or move them to another drive. They go back to a very early version of the book, not even a last to first print, whenever I move and open on another computer.  Each chapter shows old date when moved and don't have the latest changes.  The old dates are there on the chapters in ID4 but files are up to date when I open the in ID4.

  This means that the current version only I can open on a hard drive, on a single computer with ID 4. I can't do a back up, save money, or copy and paste.

  I wonder if I could "save under" each chapter individually? Then create a new book?

  I want to work on an interactive version in 5.5 without touching the printed version, but I can't make a copy to date.

  JR

  Try to use the book of package for the print command in the book panel menu.

• HP EliteBook 850 G3: HP EliteBook 850 G3: its problems after the update of Windows 10 anniversary

  Hi people!

  After the update of Windows 10 birthday I have problems with my sound card. There are two sound cards listed by Device Manager. The first is "Conexant Audio of ISST" and the second "Intel High Definition Audio". I know not weather it was the case before the update. I just recognized it after the update when I had sound problems.

  In any case, on a sound start works on the other boot it does not work. It seems that Windows chooses the sound card, every time when it starts. Sometimes it takes the bad sound card.

  I tried to uninstall maps its and their resettlement. On the HP site, there is a driver for the Conexant map bot no driver for Intel High Definition Audio card. 10 Windows itself is not find a driver for this sound card. I also tried to reinstall the other drivers, chipset drivers for example. But unfortunately it did not help. I also tried to disable the Intel High Definition Audio, but also without success.

  What else can I try? I don't want to reinstall Windows. There must be a solution without this. Any ideas? Here's a screenshot of my device manager, perhaps it helps:

  

  If you need more information, please let me know.

  Best regards

  Ty

  I just tried this driver and I still have sound after 6 resets.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_171406_1

• Blue screen issue started after the warranty more

  Hi I bought a HP laptop and exactly after the warranty period, there is a problem.

  And provided HP customer support a lot of drivers to install but not working.

  Seems that if we extended the guarantee we will get the right driver to install.

  My previous laptop was HP, so I got another. and now, I shall not repeat this error.

  Any soln for blue screen.

  Kind regards...

  Depends on the blue screen.

  You are able to write code for the blue screen error?

  BSOD (Blue Screen Of Death) tend to be caused by software problems, so there may be an easy solution to the problem. However, they can also be caused by serious hardware problems that may be more difficult to correct. In all cases, we will need the code error to determine what went wrong.