problem 1-200 after the migration to a new comp. problem at the opening of the Muse

Similar Questions

• LaserJet mfp m276nw pro 200: after the ios10 airprint upgrade no longer works

  After that I installed ios10 on my ipad that I seem to not be able to print more. the ipad is the printer, but it just does nothing when I press on print. Still, the airprint works for ios9 (old ipad).

  Nothing not done, I installed all updates of driver and firmware updates.

  Any help?

  Hi @noosterbeek,

  Thank you for joining the HP Forums!

  I understand that your AirPrint does not work with your HP Laserjet 200 m276nw of pro mfp printer after an update of iOS. I'm happy to help you!

  Please take a look at the section titled, what happens if a "No AirPrint Printers Found" message on my device Apple? In this guide, print with Apple's AirPrint. Let me know the results after trying these steps.

  If you are unable to reach a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  I hope this information helps!

• InDesign CS4 does not work after I migrated to a new Mac!

  Please, please. Someone say there is a way to download and the older version of Adobe. I tried to help on YouTube. Migration has worked on the rest of the components of CS4, but not Indeisgn. Thank you very much.

  Application migration is not a reliable method.  You must install.

  You can download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS3 and CS4:

  http://prodesigntools.com/download-Adobe-CS4-and-CS3-free-trials-here.htmlMigration

• Just migrated to a new MacBook Pro and Adobe Creative Cloud is not executed.

  After a migration to a new MacBook Pro, I get an alert at startup that Adobe Creative Cloud is damaged.

  I downloaded the installer of creative cloud as recommended, but it stops right after that I started to run it.

  The given alert is the same alert 'creative cloud is damaged"I receive at startup, with the link to download it Creative Cloud installer again.

  Uninstaller won't work, as it says I have CC Applications requiring a creative cloud.

  So, I'm in a bit of a loop. Given the no to join the Creative Cloud program, I can't disconnect.

  Any options? I am running 10.10.4

  .

  In fact, I found this answer in another thread.

  It worked for me. The key was ditching these two folders in public services:

  Good answer Brucgovn June 1, 2015-06:53

  Quit creative cloud application.

  1)

  Navigate to Applications > utilities.

  Look for a CC Adobe and Adobe Application Manager folder under utility window and trash both folders.

  2)

  Click on the link below and download & run the cleaning of Adobe tool:

  Select the option "Adobe Application Manager for Mac OS X 10.6" and then click on "Clean up selected."

  https://helpx.Adobe.com/content/help/en/Creative-Suite/KB/CS5-cleaner-tool-installation-PR oblems/_jcr_content/hand-Sea/accordion_container_1/accordion-nominal/accordion-point-1/agreement I on-item-par/procedure/proc_par/step_3/step_par/download/file.res/AdobeCreativeCloudCleane r Tool.zip

  3)

  Click on the link below and download Adobe Application Manager and install the same.

  http://download.Adobe.com/pub/Adobe/creativesuite/CC/Mac/ApplicationManager9.0_all.dmg

  Once the installation is complete, a niche will disappear.

  Then open " Applications" folder and locate the launch of Adobe Application Manager icon and double-click it and update.

  Then try to install applications CC and check.

• After having migrated to HPConnected Central ePrint problems with the print files sent to the email

  HP has done once again huge confusion with the replacement of her service "eprint" to "HP connected". There is a reasonable need to do? In any case, after the migration, I noticed several problems:

  1 PDF document, less than 5 MB, sent to the e-mail address of the printer is not printed. I noticed with a type of a PDF file that I receive from my Bank. Other PDF files are printed, sent by e-mail also. Any reference to what should be the reason of not print these PDF files?

  I want to point out that the these PDF files, I'm referring to not print is printed with success if I print them since my network where the printer and not printed via eprint option in sending the file to the email address of the printer. When using old HP ePrint service, I was able to print PDF files sent by e-mail.

  I get "system error, try again"! for the file itself and email body is printed correctly.

  

  2. in the use of HP eprint service, I used to receive the confirmation email after sending files by e-mail for printing. Now, this is not possible. Read about it on the forum I learned that this option is not available any more, after the migration to "HP connected". In this topic was given the opportunity to connect to connected HP and see if the file is printed or not. If HP has ruined their functionality for lets say more easy way to know if my files are printed or not. If I'm in a hurry and I send and send any phone to my printer, I will not receive any confirmation e-mail (with easy and speed) but I need to plug on HP connect... blah blah blah.

  That is why I ask if there is possibility of RETURN migration to eprint, old and not fancy but functional HP ePrint service?

  Used printer:

  HP p1102w CE658A, with the latest firmware, with operating system on Windows 7 computers (64)

  and always gon no response on email sent to support.

  Its easy to find!

  Product HP take or leave as it is.

  I leave!

• I upgraded to a new computer with Yosemite, after have migrated my settings on, Dreamweaver CS 5.5 will not launch. It says it cannot find the menus.xml file, then the problem is getting worse.

  I upgraded to a new computer with Yosemite, after have migrated my settings on. Adobe CS5.5 works very well except Dreamweaver CS 5.5, it says it cannot locate the menus.xml file and cannot rebuild from a backup. He suggested resettlement.

  But when I try to reinstall, I get an error that says "Installer failed to initialize. Please download adobe support advisor to detect the problem.

  Who produces the net problem of it being abandoned, and that brought me here. Help!

  This is a duplicate thread.

  DW CS5.5 and Yosemite [subject edited by Moderator]

  Ultimately, the problem has been resolved by running the cleanup CC tools then by reinstalling the software.

  Nancy O.

• Problem in themes after the migration of the APEX 4.0 to 4.2

  Dear friends,
  
  Recently, we migrated Apex 4.0 to 4.2. There are no errors during migration. But after the migration, we observed that any application with Simple red (topic no. 1) and Scarlet (theme 21) has stopped working properly. either model red button will not perform any task. Even changed the template of the button does not work.
  
  The one you suggest as follows to solve the problem?
  Thanks in advance.
  
  Dounibiligda

  Hi all

  I had the same problem.
  I deactivate the plugin "Save before exit" version "2.0.0", and the problem is solved.
  Used the new version 3.0 of this plugin.

  Thank you...

  Published by: Dipak R on November 30, 2012 05:13

• Problem with JQuery tab after you migrate towards the APEX 4.0

  My test application hosted on apex.oracle.com use the JQuery tab function and it works well with APEX 3.2.1.
  And now after the migration to the APEX 4.0, it cannot display the tab more.
  
  No idea how to solve this problem?
  
  Thank you very much.

  Glad to hear your problems resolved. Don't forget to vote for any message that has been useful or responded to your message.

• Problem with Windows Update after the new installation of Windows 7 Pro the Lenovo ThinkPad X 200

  I'm trying to do a fresh install of Windows 7 Pro on a Lenovo ThinkPad X 200. The product key is easy to find on the sticker of the ThinkPad. However, the version of Windows is hidden (for example, I can't check that my ThinkPad had originally installed Windows 7 Pro). I was able to install by using a Pro Win 7 SP1 CD ROM I bought for another installation. I used the ThinkPad I was trying to make the new facility on the product key. I was able to activate the Windows 7 Pro using the phone call and my cell phone. I checked the activation! However, I have problems with Windows update. The product key may be a different version of Windows 7. If so, why did it install and activate OK? Y at - it a fix for this problem or I have to buy a new version of Windows 7 Pro? Please note that I have not yet installed all drivers Lenovo ThinkPad as I can't seem to install correctly. Thank you!

  Since the issue is updated to Windows, it is not a product number key.

  You can reset the Windows Update components by running the Fixit on this page. But if there is malware present, she will continue to reset the connection to the update servers:

  How to reset the Windows Update components

  http://support.Microsoft.com/kb/971058

  Suggest you download and save the Fixit. Then configure the system before the clean boot by running:

  How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7

  http://support.Microsoft.com/kb/929135

  Once the Fixit has been downloaded and the system is started in the pure State, check that the native Windows Firewall is now on if a 3rd party firewall has been used previously. Now run the Fixit and choose the default mode. Restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode. Turn it back on when he finished the race and updates.

• After the migration to the new sshd, imovie now crashes whenever I try to open a project. All other applications are very good.

  Yesterday I installed a new SSD in my MacBook Pro 13 "unibody mid-2012 laptop computer.

  After installation, I formatted the drive, install a new copy, El Capitan, then moved the rest of my Time Machine backup.

  The computer works great, much more quickly than before. Everything works perfectly except...

  After migration, iMovie now blocks whenever I try to open a project. Every time. All other applications are very good. I even opened the original library from my old drive, opens the library of my Time Machine backup and they all down when I double-click on the icon for ANY project!

  The files are not corrupt because they have not changed. It doesn't matter which library I use, it crashes whenever I try to open a project.

  So far, everything on the Mac works fine. Other applications of Apple, everything! Please someone help me solve this problem because I use iMovie on a regular basis and have SEVERAL projects open that I can't afford to remove.

  Thank you!

  Hello Jon Tompkins,

  Thank you for using communities of Apple Support.

  If I understand your message that iMovie crashes when you try to open a project. I know the importance of your projects are as I like to use iMovie as well. First of all, I would like to check to see that iMovie will appear in your shopping list in the Mac App Store. If so, delete the app and then reinstall it.

  If this isn't the case, so do not delete the app. Instead, follow this link:

  OS X El Capitan: If an application crashes or closes unexpectedly

  Who also advises to test the problem in safe mode. This article includes the steps to start your MacBook Pro in safe mode:

  Try safe mode if your Mac does not end commissioning

  After having tested in safe mode, restart your Mac again and allow it to start up as usual. Then test the question again and see if it has not changed.

  Best regards

• iMac fan runs full speed after the migration wizard

  Hi, just a clean installed 10.9.5 BONES and then I used the migration assistant to transfer my backup time machine from my old computer. He made the transfer, took nearly 4 hours. Then when he was done he rebooted the computer, and as soon as he started the fans in the computer run at full speed. I have a small (HARD drive fan control) software that I have installed to see the temperature and it tells me 119F and fans are 4962 RPM. Why it does this?

  Once the computer restarts, it said it was computer optimization and it can affect performance, can that cause the problem of fan? I did e-mail importing and installing imessage and now I'm looking at the speed of the fan and it is now 118f 4638 RPM... always very noisy. This computer did not a fan NOISE until I migrated my data.  Help, please!

  IMac is a 3.06 GHz Intel Core 2 Duo

  4 GB OF RAM

  27 ", end of 2009

  1 TB harddrive

  Once the computer restarts, it said it was computer optimization and it can affect performance, can that cause the problem of fan?

  Yes. It should settle down after the Spotlight indexing. Which can take some time, depending on the number of files that needed to index.

  119 ° F is on the colder side of normal and no reason for concern.

• Problem starting after the installation of the NTI Echo Satellite P50-B-11V

  Hi guys. I have problems to start mid laptop computer (Toshiba Satellite P50-B-11V, F04236S) after the installation of NTI Echo3 to migrate the data from the drive HARD original to a new SSD (Toshiba 480 GB Q300 series).

  Error: file/echo not found boot/initrd.gz. Pilot pata-platform...
  Kernel panic not syncing VFS: Don't mount rootfson unknown - black (0,0).

  Anyone facing this problem? Please advice if you have the time.
  I tried several times to repair Windows (F12 key) and I have tried different ways to migrate data but the problem even after reboot.

  Thanks fo your time.

  Posted by marianbur
  

  Hi guys. I have problems to start mid laptop computer (Toshiba Satellite P50-B-11V, F04236S) after the installation of NTI Echo3 to migrate the data from the drive HARD original to a new SSD (Toshiba 480 GB Q300 series).

  Error: file/echo not found boot/initrd.gz. Pilot pata-platform...
  Kernel panic not syncing VFS: Don't mount rootfson unknown - black (0,0).

  Anyone facing this problem? Please advice if you have the time.
  I tried several times to repair Windows (F12 key) and I have tried different ways to migrate data but the problem even after reboot.

  Thanks fo your time.

  Dear marianbur,

  New laptop having same problem here, is now stuck... Have you received still no solution?

  Greetz

• Assistant Migration - copy a folder after a migration to the new computer

  Hi-

  Today I created my new MacBook Air. I used Migration Assistant to transfer, wireless, my old MacBook Pro. I didn't have enough room so I disabled my music folder. After the migration is complete, I made little place on my new Air and represented the Migration Assistant. This time, I chose only the music folder. But the problem I have is that, at this stage, I am prompted to overwrite my account or duplicate... I don't want to do either... I want to just copy this folder on my existing account.

  Sorry, this should have been posted under El Capitan. Just realized.

  OS X El Capitan

• After you enable SLI on the Satellite x 200 mode the screen goes black

  Hi all

  my name is Alessio and I encounter the following problem with my Satellite x 200-24e with Vista home 32-bit:

  Recently, I updated the operating system and yesterday I updated the VGA driver with the latest version available on the web site of Toshiba (display-20080904102618), everything worked fine but when I activated mode SLI the screen went black.

  I restarted the laptop and I tried to boot Vista on a regular basis, but I still got black screen.
  Then I started Vista in safe mode and reload the VGA drivers to set the SLI mode since the safe mode did not identify the model VGA.
  Can anyone help me solve this problem and get the SLI mode working again (I was able to set the SLI mode before update the VGA driver)?

  Thank you

  This wonderful s information.
  It of strange that the screen was dark after the SLI has been activated but it looks like it's working now.

  Thanks for your comments

• Are there problems with changing the IP address of a system of v5.3 ACS after the initial Setup?

  I'm migrating from ACS v4.2.1 to v5.3.  I want the final v5.3 system to assume the IP address of the machine 4.2 of origin so I don't have to change any configs on network devices.

  Are there problems with the change of the IP address of the system AFTER the initial installation v5.3?

  I tried without problem. I changed the ip address of the WLC several times.

  You must ensure that:

  1-) you change the switchport accordingly to the appropriate vlan if the new ip address belongs to a subnet of a vlan different.

  2-) make sure that all clients AAA configured to use the new IP address of the ACS servers.

  Here is the procedure how to change the ip address of the interface (according to the doc of cisco):

  http://goo.GL/0BYqVT

  I also changed parIP normal address and it works. but of course, the server must be autonomous before doing this step (i.e. no secondary ACSS registered to him and he is not on the other ACSS in a distributoin).

  HTH

  Amjad