After the installation of the latest update of Firefox, how to restore the list of my emails on MyMSN homepage, which the rating was present before the update?

Similar Questions

• Playlist falls at the end of the folder list after adding a song in latest update

  Unfortunately after installing the latest update, when I add a song to a playlist that is in a folder, playlist will reorganize itself at the end of the list of folders. This has not happened before and makes it confusing if I add more than one song to a playlist. This problem is known by developers of iTunes?

  Steps to reproduce:

  1 create a folder in the form of iTunes playlists

  2. create at least two selections to put in this folder

  3 drag a song from any playlist to any playlists that have been made in a folder, to the exclusion of the last playlist listed in the folder

  Result:

  Playlist the song was reached the last post from the list within the playlist folder.

  Thanks in advance.

  This is a bug in iTunes 12.3.2.35, hopefully be fixed in the next version.  Already pointed out, but he can't help but remind developers via the iTunes feedback page.  Although it is not a "fix", sorting in the folders in the list of reading must be corrected when you quit and then reload iTunes.

• My computer does support the latest version of Firefox - how to identify and download the last version that works?

  Following presentation of the material of my iMac

   Model Name:	iMac G5
   Model Identifier:	PowerMac8,2
   Processor Name:	PowerPC G5  (3.0)
   Processor Speed:	1.8 GHz
   Number Of CPUs:	1
   L2 Cache (per CPU):	512 KB
   Memory:	1 GB
   Bus Speed:	600 MHz
   Boot ROM Version:	5.2.5f1
   Serial Number (system):	QP52107FSDX
   Hardware UUID:	00000000-0000-1000-8000-0011243B1A5A
  

  Firefox 3.6.x is the last available from Mozilla for PPC Macs.
  
  http://www.Mozilla.com/en-us/Firefox/all-older.html

  For older Macs that are not considered supported in versions of Firefox 4 +, try TenFourFox for PowerPC in performance Mac 10.4.11 and 10.5.8.
  
  http://www.floodgap.com/software/tenfourfox/
  
  http://tenfourfox.blogspot.com/
  
  https://code.Google.com/p/tenfourfox/wiki/PluginsNoLongerSupported

• How to restore or at least analyze emails from account deleted when the server no longer exists

  I have emails from an email address @domain.com that are saved in my Local folder. I would like to follow the instructions to restore this account here: _ http://kb.mozillazine.org/Thunderbird: _FAQs_:_Recover_Deleted_Account

  The problem is that the server that hosted email no longer exists, so I can't add it back again. Is it possible to import in Thunderbird yet, so I can always analyze them? Or someone has a suggestion on how I can access these emails in a simple way? I need to be able to search through them, as I already do in Thunderbird.

  In general, in IMAP, all your messages are stored on the server and Thunderbird downloads the temporary copies in order to accelerate the search and navigation. Since there are parameters for the amount of content in the message to download, or only the headers, there is no guarantee that you will have messages in their entirety.

  For future use, if you have an IMAP account that is connected and the desire to preserve the independent messages from the server, you must copy them to a place outside of the IMAP account folders connected, such as local folders.

• How to display a list of all email without the indetations thread?

  I must have clicked the wrong thing. Now one of my lists of folders of email has the emails with the same subject all indented which I assume is the THREAD size. I want to keep things simple and just to list them in the order of time. How to I get rid of the thread indented format?

  View (alt + V) menu > sort by > non threaded

• I deleted some of my documents folder undeletable file, and after reboot, I see that lost my desktop icon, how can restore my icon file and office

  How can I solve this problem?

  Original title: with a peogram I deleted some of my documents folder undeletable file and after reboot I see who lost the icon on my desktop, how can I restor my file and desktop icon?

  Have you tried a System Restore yet?  Restore to a previous State could solve your problem.

  For Windows 7 and Vista: [link]
  For Windows XP: [link] (scroll down to restore from a Restore Point)

  Also, could you please tell us what do you delete?

  Thank you
  Digilodger

• Re: Vista will not start after the installation of update

  About 2 days ago I updated 2 Optional updates through windows update. It was - Input - Synaptics Synaptics PS/2 Port TouchPad
  and somethind to do with sound hdmi (don't know why I got this update ' cos I do not have a hdmi and I accidentally installed it as well).
  After that installs Vista won't start so I did a restore of the system in safe mode, and she came back to life, however, isn't in better shape, will probably not not to install Vista all over again.
  So be careful when you install these updates.

  It's weird that they came with windows update. As much I know usually windows update does not update if not needed harddrivers...

  You need to update your hardware drivers from the Drivers Toshiba download site and not from Windows update because no one knows if they interfere with the drivers of Toshiba.

• After the last update, I can scan is no longer in pdf format

  After you have installed your latest update in accordance with the recommendations, I can no longer choose pdf option when scanning documents.

  Hi @kkeach,

  Thanks for the screenshot and your answers!

  The scan software is included in the full feature software and drivers. You can download it by clicking on this link.

  You can also try using the HP and Capture scanning software. As well as the scanning without HP software. Scanner without HP software.

  If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

  I hope this helps!

• Loss of sound after IDT High Definition Audio Codec update.

  HP Support Assistant says that a new driver IDT HI Def Codec is available, so I downloaded and installed 6.10.6417.0, after which I have no audio output. I don't know which driver version was installed before the upgrade, but I have since downloaded and installed 6.10.6330.0 and rebooted but still have no sound. The device is activated and if Windows says that it works correctly (which isn't, but then it is Windoz).

  I'm now totally at a loss as to how to proceed otherwise that a clean installation of Windows that, for obvious reasons, I'd rather not do.

  System details:

  HP Envy 14-2002ea Beats Edition runing Windows 7 Ultimate 64 bit SP1.

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp53001-53500/sp53281.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When finished, stop the laptop.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f9 to load the default values (sometimes it is f5, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.

  Kind regards

  DP - K

• How to restore partition factory settings after installing Win 7 Professional and after having lost everything as a result.

  I have a netbook with a partition that has win7 starter installed.  I unfortunately poorly installed windows 7 Professional and now have nothing available which was originally on the computer.  Everything was wiped clean including my ability to use / access my wireless, ethernet controller, pci, etc..  I tried repeatedly to recover the partition back to factory settings, but it won't give me the option to select the partition.  I guess that's because they are all two Windows 7.  Can you help me get it back to windows 7 edition starter of the partition so I can restore all the factory settings and programs.  I haven't lost any information or files that I loaded win7professtional as soon as I turned it on.  I have restore points, images, etc.

  When I installed Win 7 Professional, not old Info windows.old file but I don't know how to access that is.

  Help, please?  Thank you

  The Windows.old folder has two objectives:
  (1) can be used to uninstall Windows 7 and return your PC to the previous version of Windows.
  (2) contains a backup of all your files of data, documents, photos, Etc. from the previous version of Windows.

  If you don't need either of these two options can delete the Windows.old folder. In your case if you can access the "recovery Partition" to restore the windows and then back the Windows.old folder before you begin.

  Note: Option to change Windows Explorer to see the Windows.old folder:
  Click on start and enter in the box "Search": "hidden" (without the quotes)
  Click on the "Show the hidden files and folders" option at the top of the list.
  In the "Folder Options" window
  Click the 'view' if it is not already selected.
  In the list "Advanced settings" locate "hidden files and folders".
  Now click 'show files and folders '.
  Then, disable the following:
  "Hide empty drives in the computer folder.
  "Hide the extensions of the file types that you want to know."
  "Hide protected operating system files"

  Click on the "Apply" button and the OK"" button.

  How to recover Documents, music, and e-mail after the upgrade with the Windows.old folder
  http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

  Where are my files and folders after upgrading from Windows XP or Windows Vista?
  http://Windows.Microsoft.com/en-us/Windows7/where-are-my-files-and-folders-after-upgrading-from-Windows-XP-or-Windows-Vista

  How to restore your personal files after you perform a custom Windows Vista or Windows 7 installation
  http://support.Microsoft.com/kb/932912

  Using Windows.old to retrieve your personal files
  http://adacosta.spaces.live.com/blog/CNS! E8E5CC039D51E3DB! 66249.entry? a = 264056520

  How can I remove the Windows.old folder:
  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-the-Windows-old-folder

  How to uninstall Windows 7:
  http://support.Microsoft.com/default.aspx/KB/971762

  How to restore a Windows 7 computer to a previous Windows installation by using the Windows.old folder: (Note: this article will not work for 64 bit versions of Windows)
  http://support.Microsoft.com/kb/971760

  Uninstall Windows 7 on a multiboot system
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-Windows-7-on-a-multiboot-system

  ======================================================

  How recovery your computer (Windows) using "Recovery Partition" of the Manufacture

  To get there, start your computer and then pressing the appropriate function key. It can be either F1, F2, F9, F10, F11, F12, DEL or tab key. Check the manual for your make and model.

  If your hard drive has failed, you must contact the manufacturer support team and request a "recovery disc" which allows to reinstall Windows 7.

  How access/start the process of recovery of the manufactures listed below.

  Acer: Press and hold ALT + F10, as soon as you see the logo

  ASUS: Press or press the F9 key as soon as you see the Asus logo.

  Dell: Press CTRL + F8 directly after switching on / to start the computer

  EMachines: hold the Alt key and hold press and release the key F10

  Fujitsu: Press F8 several times directly after switching on

  Gateway: http://support.gateway.com/s/software/microsof/vista/7515418/7515418su531.shtml

  HP Notebook: Usually to begin recovery process press the F10 key, power on the computer
  HP Mini: Press F11 directly after switching on / to start the computer

  LG: Press F11 directly after switching on / to start the computer

  Samsung: Press the F4 key to the Samsung logo when you turn on first of all of the computer.

  Sony VAIO: Reboot and press "F8" repeatedly until the screen "Advanced Boot Options".

  Toshiba: press and hold the "0" key before and during feeding sequence.

  Windows 7 - location of the Partition Recovery and information.
  "Configurations of drive partitions using the BIOS has recommended.
  Note: Check the diagrams of this article
  http://TechNet.Microsoft.com/en-us/library/dd744364%28WS.10%29.aspx

  J W Stuart: http://www.pagestart.com

• Windows Explorer hangs for a long time after the installation of the latest updates from Microsoft

  Hello!

  Yesterday, I downloaded and installed the latest Windows updates on the Web from Microsoft by using Windows Update.

  After that, I see a strange thing from time to time.

  Sometimes when I open Windows Explorer or on a list of logical drives reader app, the hangs of the application for 10-15 minutes (not answer).

  While it hangs, other applications can function normally if they don't read the list of drives, for example, I can use Internet Explorer at the same time.

  The appearance of the problem is unpredictable, it can happen after 10 to 20 minutes of work after the reboot, or even after 1-2 hours of labor.

  My OS is Vista Home Premium x 64, laptop Pavilion dv7 - 1157 cl.

  At the moment I don't have any antivirus software or third party drivers (I configured factory drivers only).

  Event log Windows contains no error messages, all devices are displayed in device in the form of work normally without errors management.

  I ran the test of memory with the memory diagnostic tool, it found no errors.

  Here is the list of the installed Windows updates.

  Do you have any suggestions? There may be a problem already known with some updates?

  Message edited by Gleb on 14/05/2009 08:38

  I'm surprised, there is no answer at all.

  Well, the problem has been successfully resolved by installing Vista SP2 RTM. My test program has been run 20 hours and showed no delay.

• System restored automatically after the installation of updates & a few missing desktop icons.

  Original title: same set of updates on both computers due to different problems, one problem being a system restore.

  I have two Windows 7 computers in my house.  They all have two problems after installing updates a month ago.  The problem for 'Computer 1' is a bigger problem than the problem of the "Computer 2".  2 computer problem not really seems to be a problem now, but I'll give you the information for comparison purposes. Sorry for the length of this post - I am trying to be thorough.

  1 COMPUTER DETAILS:

  News of the computer: Dell Studio 1745 laptop computer running Windows 7 Home Premium 64 bit, six months at the time of the problem, now age of seven months. It came with Norton pre-installed, never used and uninstalled.  Trend Micro Internet Security installed at the beginning of the use of the computer.  Analyses Micro trend came clean.

  Background: set up with a single account (Administrator, of course) and after a few days of putting in place computer, said ale user account for everyday use.  Computer is configured to warn me before downloading/installation of updates of Windows, with permission for each type of account to install Windows updates.

  While in the standard account, I welcomed these download/install updates and was prompted to restart the computer.  I was done with the computer, so I just closed instead of restart.  According to "Your update history Review", it's updates and they were all successful:

  Update for Windows 7 for x 64-based systems (KB980846)
  Microsoft .NET Framework 4 Client Profile for Windows 7 x 64-based Systems (KB982670)
  Update for Windows 7 for x 64-based systems (KB982519)
  Update Microsoft .NET Framework 3.5 SP1 for Windows 7 and Windows Server 2008 R2 for x 64 systems (KB982526)
  Cumulative update for Media Center for Windows 7 x 64-based Systems (KB981078)

  After you turn on computer back, everything seemed normal.  I opened Firefox and I got a notice that Firefox has an update is available, a standard user cannot.  Unlike some programs, there is no popup to sign as an administrator, so I went to start > switch user and signed as an administrator.  (There was no update of Firefox at this point - just a switch single user.) That's where the problem appeared: instead of normally load the admin Office, I had to wait while Windows configured my desk (it's new)... wait... wait... wait... wait... BAM!  Your computer has been successfully restored * insert date here * (I don't remember what it was - January of this year, perhaps - because I was so incredulous that it happened and I continued to watch the game "successfully restored").  I do not have the computer to eat, and it don't has not asked me if I wanted to restore it.  He just did, just on its own initiative, when I went on the admin account.  A bunch of shortcut icons are missing from the Office of the admin acct and the ACCT. standard, and wallpaper to the admin account has been changed.  I am not absolutely sure if nothing else was touched.

  I have searched online to try to understand why it happened, and I remember well from my only find, is that if I went to the restoration of the system, there will be an option to cancel it, but I don't see such an option. So I told the computer to eat on a few days to a week before that updates.  It doesn't seem to help.  Shortcut icons are still missing.  Looked at the update history and it shows the five latest updates as being installed successfully, but Windows Update tells me that I need to these five updates AND this time, the little check marks are only already there on four of the five updates listed.  (The first time, the little checkmarks were already there for all five.)  This is the update that is NOT now pre-checked:

  Microsoft .NET Framework 4 Client Profile for Windows 7 x 64-based Systems (KB982670)

  Do not reinstall the five updates.  I don't know if I should jump install them again, or if I should install only the
  now, four are already "pre-checked."  I'm very hesitant to install KB982670, because this update seems to be the likely cause of the problem given the fact that it is already pré-coché in the Windows and the following information updates for computer 2.

  Since I installed the latest updates for 1 computer with no apparent problems:

  X 64-July Windows malicious software removal tool (KB890830) 2010
  Update security for Windows 7 for x 64-based systems (KB2032276)

  NEWS ON COMPUTER 2:

  The computer news: Systemax desktop running Windows 7 Professional 64-bit, a month at the time of the problem, now age of two months.  It has not come with any pre-installed antivirus.  Trend Micro Internet Security installed at the beginning of the use of the computer.  Analyses Micro trend came clean.

  Reminder: Set up immediately with an admin account and a standard account for everyday use.  Computer has been set to automatically download and install updates for Windows, but is about to inform me first.

  At the time of the problem above with the laptop, desktop computer has been enabled.  As all loading,.
  an error message came that there was some kind of issue with the .NET framework.  At another person asked if he knew what was up with that, and it didn't.  Did not note the specific message, thinking he would tell me again if there was a real problem.  I thought it could have been some kind of Windows hiccups when starting the computer, not even knowing about update problems.  I have yet to see this message.  After the number of laptop (computer 1), I took a peek at the desktop computer (computer 2) to check that Windows Update and I saw that an update is available, which is the referenced above same update that the notebook had already the check mark in its box (KB982670), which gives me the choice to check the little to install it.  Very curious, since, as already mentioned, the computer has been configured to automatically download and install Windows updates.  Looked at the update history, and it has already downloaded and installed the other four updates that the laptop has been.  Changed the automatic Windows Update setting to warn me before you download and install updates.  I have not installed the missing update.  Said the only other person in the House who would probably bother install updates to not install it.

  A month later, 2 computer has a notification from Windows update that 21 or 22 updates are available (as a result, by clicking on the icon of the trial of Microsoft Office).  The update not installed a month ago is no longer on the list, and update history shows as having been installed a few days before, apparently because someone else in the House must have thought it looked like a good idea.  I installed all the 'important' updates and have not seen any more problems with computer 2.

  BACK TO THE COMPUTER 1:

  Yes, is there anyone with ideas on how to get 1 computer back to its state before the 5 updates listed above, and what to do about to reinstall some or all of them, I hope, without more problems, for example a random food system does not happen?  I have a feeling I will say that the random system restoration do not occur, but he did.

  Thanks for any help.

  No, I don't use the Norton removal tool.

  IN RE COMPUTER 1 ONLY:

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. click right on the file saved in #1 above, and then select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  4 for good measure, reset Windows Update by...

  How to reset the Windows Update components?
  -Online skip the section to APPLY to; KB971058 access via I8 32-bit only; Run the difficulty in DEFAULT and modes, then AGGRESSIVE [1]
  http://support.Microsoft.com/kb/971058

  5. restart & test.

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will delete your update history (but not list updates in the updates installed)

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Internet does not work after the installation of updates

  From 2 updates (KB972270 and KB955759) internet wouldn't work once these updates have been installed.  I removed the updates and turned off the automatic update feature.  Periodically, I would try again but the same result.  I'm now 16 updates to download and I tried last night, but once again not Internet... even after manually loading all, but updates 2 above.  I want to keep my computer up to date but can't seem to solve the problem of the internet.  Is there a problem with the Microsoft updates?  How can I fix the problem, so I can update my computer?

  Open Internet Explorer (only) to http://windowsupdate.microsoft.com GOLD http://update.microsoft.com/microsoftupdate . Select CUSTOM and scan: are any of the updates other than KB972270 and offered KB955759?

  NB: If an update of root certificates is listed under the category of optional software updates on the left side of the scan results window, install it to enjoy greater security of IE8.

  If you choose not to install KB955759, you run difficulty he #50326 in http://support.microsoft.com/kb/954157 to protect your computer.

  Note: I'm not going to tell you it's OK do not install a critical security update. If IE crashes after installation of an update, something is wrong with your computer (e.g., an infection, one or several incompatible modules of the IE; a "horked" install IE8).

  If you install a security update & have a problem...
  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• After you have installed the latest updates it freezes and blue screens or?

  I have installed the latest updates and it did not even to the part where he set up after a reboot.  Now I'm stuck in safe mode and no alternative.  Updates are not listed in the list of installed updates and I tried to do a repair of the system from the installation cd and I'm tempted to do a restore system since the day before two weeks before updates.  Nothing works.  Any suggestions will help!  I'd hate to reinstall because I have no backup support.

  Update: the event log has nothing in it to try to start safe mode.  If the problem occurs before the event log service was started.  I tried to uncheck all part 3 applications and services in msconfig.  I'm out of ideas.  Someone has everything?

  I said that I tried to do a restore from the day before and up to two weeks before the updates.  I actually found the problem and he had nothing to do with updates.  My crapped out video card and ATI Control Center was freezing at startup.  So I took out the video card and it starts perfectly.  Thanks for the help anyway.

• The yellow icon appearing again after the installation of Windows updates.

  Original title: Windows Update

  I went to the Start Menu and click on Windows Update.  (Microsoft Update is the real screen name.)  I clicked on Express - Get high-priority updates (recommended).  Microsoft Update now says the following: check the latest updates for your computer...  After a while the rescued and install updates appear; then I click on install updates.  Installation of updates window appears with this message: the updates are being installed.  Installstion status is reproduced below.  Extraction of the files sometimes on the screen.  Often I do it the short way; in other words, I click on the yellow at the bottom of the screen, and updated icon Instaliing up-to-date displays.  Long or short path, the yellow icon is displayed again after some time.  Why?  Also, why the rest yellow icon even after having this?

  Sincerely,

  KathyNortonKS

  Hi KathyNortonKS,

  Have updates you tried to install?

  Method 1:

  You can view the history of update to see if recently offered updates are installed or not.

  a. click Start, all programsand then click Windows Update or Microsoft Update.

  b. on the Windows Update Web site or on the Microsoft Update Web site, click view update history. A window opens that displays the updates that have been installed or that have failed to install on the computer.

  c. If you see updates failed, double-click updates failed to check the error codes.

  Method 2:

  You can read the following article and run the Fixit:

  The problem with Microsoft Windows Update is not working

  Method 3:

  You can also read the following article and perform a full scan on your computer by using the Microsoft Safety Scanner.

  Microsoft safety scanner

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.