The yellow icon appearing again after the installation of Windows updates.

Similar Questions

• Windows 8 OEM samsung original is disabled after the installation of windows updates.

  I have the original windows 8(Samsung Laptop) confirmed by Samsung as the original windows. Have this laptop for about 2 years now and have reset my windows again. But this time after the installation of windows updates, my windows are disabled and the watermark comes and it is said to activate windows. Samsung said support windows is authentic and check with Microsoft. But Microsoft has no support for 24 hours and support is not live at this time. Can someone help me with this problem. Please, I beg you. And I tried to put the key in the firmware to activate, but nothing helped. And the OEM key is invalid for activation at all.and add I activated my windows by phone before the update using the technique of slui 4... and after it started to update. And now reactivate cant using this key method.and calling OEM is not valid anywhere.

  Hello

   
   
  Please contact Microsoft Community.
   
  We regret sincerely all the inconvenience caused to you.
   
  I suggest you try the phone activation this time and see if it helps.
   
  a. at the start screen, drag from the right side, or hover your mouse on the top right of the screen to display the menu of charms.
  b. tap or click the charm of parameters.
  c. press or click on change PC settings.
  d. If your PC is not activated, computer settings provide instructions that are customized to your activation error. If telephone support can provide assistance for your mistake, tap or click the appropriate link, which may resemble one of the following conditions:
  > Activate

  > Activate by phone

  I suggest you refer to the following article for more information.

  http://Windows.Microsoft.com/en-us/Windows-8/activation-errors
   

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

  Kind regards
  Anusha

• I have a compaq presario cq60 with vista which was able to start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. What can I do?

  I have a compaq presario cq60 with vista. Could not start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. I took the hard drive and installed in my office. Windows Explorer displays the main and recovery partitions.

  The primary partition has the following folders (including hidden & system)

  The recovery partition has the following (including the language files more)

  Someone at - it ideas why my laptop does not work?

  Thank you

  Greg

  Hello

  You press F11 on startup with a HP Compaq to start the recovery process.

  For problems with the recovery process, you will need to contact HP.

  BIOS problems:

  There are messages for the HP Forums for posters with similar errors:

  http://h30499.www3.HP.com/T5/notebook-HP-ProBook-EliteBook/notebook-HDD-problems-TEst-status-1-07-fail/TD-p/658902

  http://h30499.www3.HP.com/T5/notebook-PCs-pavilions-Presario/HP-Pavilion-dv8000-getting-1-07-fail-error/TD-p/883284

  http://h30499.www3.HP.com/T5/notebook-PCs-pavilions-Presario/HP-Pavilion-notebook-dv6000-1-07-fail/TD-p/1069457

  All the answers it point to a drive about to fail

  See you soon.

• error code 525 appeared during the installation of windows update

  error code 525 appeared during the installation of windows update.

  I m using windows vista 32 bit

  Hello

  see if that helps to fix:

  How to reset the Windows Update components?

  There is also an automatic 'fix - it' here

  http://support.Microsoft.com/kb/971058

  Also, try to put the KB numbers in the search on the link below and then manually download the

  http://www.Microsoft.com/downloads/en/default.aspx

  or repost in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• 57 a error code during the installation of Windows Update KB2598290

  Windows downloding this update, but allow to install this update

  57 a error code during the installation of Windows Update KB2598290

  Options-

  1. let your office product installation media in the drive and try to install the update.

  2. try manually download and install the update: http://www.microsoft.com/en-us/download/details.aspx?id=29770

  3. repair Office and try to install the update.
      http://support.Microsoft.com/kb/924614

• Layout error 80070490 during the installation of Windows updates.

  I'll just stop and see what happens.

  Success! I am very happy that my Windows Update problem seems to have been resolved.

  I had trouble to select a subset of updates installed. Eventually, I realized that I needed to click on the hyperlink on the screen of Windows Update to be able to choose the individual updates. After that I did

  I was able to determine that the update of kb300061 was the cause of the disorder.

  When I searched online for this problem, I found a site, suggesting that {e7ef96be-969f-414f-97d7-3ddb7b558ccc} registry value must be exported and deleted. I don't know why the export was necessary, even if I exported the registry value on the desktop and then deleted in the registry. My computer worked better after that this problem has been resolved.

  Thank you!

  However, a persistent difficulty, I'm having is that when I press the key Windows of the desktop mode

  several of the boxes on this screen are now empty.

  I could contact you again to try to go to 8.1. I don't know how to download 8.1.

  Whenever I click on the store icon, it cannot afford to enter the store. Simply, he returns to the previous screen.

• Problems with the installation of windows updates and reboot the computer

  When you try to restart the computer it freezes on "installation updates.do not turn off computer.". Currently have 20 updates which will not be installed. computer says CCC.exe prevents the computer from restarting and getting error code 80240016 when you try to install the updates

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/957307

  Error message when you try to install the updates on the Windows Update Web site or the Microsoft Update Web site: "0 x 80240016.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not resolve the problem:

  Windows Update Forum:

  It's updated operating system Vista, upgraded installation and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost, are kindly Error Codes and exactly what happens when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• I get an error code 0 x 80240036 during the installation of Windows Update.

  had a crash re - installed windows XP Pro, then I tried to download all updates and got this error > error number: 0 x 80240036

  The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.
   
  Help!
   
  Original title: had an accident re-installed windows error number: 0 x 80240036

  Hi txcatsmeow,

  Windows update no longer works if you don't have XP SP3 installed. To check your system service pack level, click on start, run and type "Winver" in the Run dialog box and click on 'OK'.  If your system already has XP SP3 installed, you can try to reset the windows update components using the link below.

  There are prerequisites for the installation of Windows XP SP3. You can find them by reading the link below.

  Steps to take before installing XP SP3

  http://support.Microsoft.com/kb/950717

  How to reset windows update components

  http://support.Microsoft.com/kb/971058

  If your system does not already have SP3 installed, you can:

  Download and install XP SP3 fron the link below. (Ignore the warnings on THIS subject the professionals and network facilities).

  Windows XP SP3.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

  Windows XP SP2.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=28

  If you encounter problems installing XP SP3, you can refer to the procedure described in the link below to resolve an installation failure.

  How to troubleshoot a SP3 Installation fails.

  http://support.Microsoft.com/kb/950718

  Let us know if this is useful to provide feedback. Good luck.

• Unable to start the computer after the installation of Windows updates

  original title: same problem with the other oddities.

  I also have a computer down the update.  Although I tried several times to start the computer from the installation CD re, when I get to the page where I have options to fix or exit, locks from my computer to the top and will go no further.  Suggestions how to get the computer to boot the CD and allow me to choose the repair option without locking up?  Thank you!

  I finally managed to get the reinstallation CD to load.  I also spoke with telephone tech support at Microsoft who helped me to descend KB977165 my system.  After that was removed the computer booted without error.  By MS tech, I am also running the anti-virals and malicious programs to see if they detect all the other infections.

  Originally, the CD would load to the point of being able to choose between the options: continue to fix or exit.  At this point, the computer froze upwards and would not all repairs in order to remove KB977165.  Microsoft launches a call again tomorrow in order to install safety free bug so far.

  Thanks for your reply.

• Failure recovery Windows vista CTOERROR.flg and after that error the error 0 x 643 during the installation of windows update

  Hi all

  system information: HP DV6 LAPTOP, windows vista sp1

  When I try to install windows vista sp1 disks/recovery partition that I get the error recovery manager prompting me to choose either to see the details of the failure or restart: CTOERROR.flg as a Notepad on my desk. I did try 100 times but nothing helped. I can't restart after this recovery failure message because it shows the dialog box when restarting: windows security update is not properly installed or is not approved. So, I have to go through the process of recovery again to see the desktop (any operation - music video, internet, all), but only once.

  The last time I got this message too. When I did the windows installation of recovery a few months back discs, this time I figured out to install all updates IMP to automatic update via update of windows. All updates have been installed successfully, then it restarted and gone through the process of language settings, time settings and everything...

  But this time when I'm trying to update windows, I get windows update, error 0 x 643 which is updating security for .net Framework 3.5 sp1 and update family. I don't know the answer how to exit with this error "windows help" and also this forum too, which asks for the installation of the updates of the .net framework from the windows update site directly. But the problem is:

  Updated Windows ask me to restart windows automatic or manual update installation takes place and restart causes problem because it shows the dialog box - windows security update is not installed successfully. I need to install all updates at once like last time of my understanding. :

  1. so, if I install the update to windows (to try my luck as last time) it says error 0 x 643 for .net framework and you ask to reboot, and after that when I try to manually install failed 0 x 643 updated it asks me to restart windows for pending updates.

  2. in the alternative, if I try to install the update failed everything first just after the failure of the recovery it doesn't allow me to install important updates for vista sp1 and asked to restart windows.

  All I need is to update all updates via windows automatic update that is not happening at the moment.

  Not even be able to upgrade to sp2 bcz it also restarts for installation.

  Help, please.

  Thanks in advance.

  Hi harry973,

  Download Service Pack 1 will not convert in a disc in Windows Vista Service Pack 1.

  A recovery disk will not be useful to perform an Inplace upgrade to.
  You will need the original Windows Installation disc.
  If the disc that came with the computer, then it would be a drive OEM (manufacturer). This disk can only be used for a reinstallation of Windows.

  
  Hope this helps!

• Firewall Windows disable the Internet Explorer loads Up after slow start after the installation of Windows updates

  Hello, (this the mystery of on and Off and back on Windows Firewall with slow loading of programs like Internet Explorer as this all is pass it on firewall, disable the firewall, the firewall, it occurs only during starts, after he fine / but very annoying on reboots whom he accuses of my computer down) / listed below is the cause of it , and when she first started, you have a solution?

  I recently installed the last 16 (High Profile) updates to security, for most security updates and updates from net framework as well as the removal of malware for windows XP tool.

  After installing these updates, now my Windows Firewall turns off during 'Boot Up' on all restarts. If I try to load Internet Explorer, it will also not load up to minutes serveral / while this happens... That's fine, then finally my firewall itself loads Up quickly turns to Internet Explorer and back on during this time around the same time.

  After these updates these things are happening on my computer now, it's as if there is a process running, but nothing run any virus, Trojan or worm etc just these updates caused this problem. I don't know if it updates is corrupt or not, but have tried different things as system file checker /scan etc with no luck.

  (1) computer boots to the top and seems to Load Up Fine ' until the ' or 'Look at this' but isn't, something is running in the background or process "wing unstalled" is obviously "unhooked", etc..

  2) try to load Internet Explorer last minutes and is very slow to load up, even if I 'don't load Internet Explorer' must still a long while that as in the firewall turn off for awhile some several «minutes» (way too long), before "auto turn on automatically return.

  (3) turns firewall Windows itself on "finally" as Internet Explorer finally loads upwards as well the two Internet Explorer is able to load 'definitely' and the firewall is on "finally" as many minutes later as listed above, at the same time.

  This could be the cause? Only, it has begun to 'After' I ran windows update and installed the 'most recently high security updates for windows XP' there were 16 listed mainly security updates and updates of net framework as well as the software removal tool windows malware.

  That's all that is changed on my system, I tried many things, nothing seems to fix this problem with my computer. I know for a fact that these updates are the cause, but am not sure that you caused it? Or how do to solve this problem, any sugguestions would be appreciated.

  Please answer questions following diagnosis by number in your very next answer (no need to quote this post):

  1. what application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  2 a Norton or McAfee application already installed on the computer?

  3. do you have a Norton or McAfee free trial come preinstalled on the computer when you bought it? (No matter if you have never used or activated).

  4. you are using IE6, IE7 or IE8?

  5. have you ALREADY had the opportunity to do a Repair Installation of Windows XP for some reason any?

  PS: PLEASE DO NOT START ANYTHING IN ADDITION TO NEW THREADS ABOUT IT!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• restart after the installation of windows updates

  After a reboot after you download 3 updates my computer is stuck at configering 3 0f 3 updates 70% and will not move. I tried (after waiting several hours) to restart the computer but it only gos to 3 of 3 70%.

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  Then:

  Click Start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the bad.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• Unable to start after the installation of Windows updates

  original title: windows update 10/11/2011.

  When I install the updates above that my pc does not restart, I restore it to before the update and my itunes icon disappears.

  I installed both times and the same thing happened twice, am now a little worried if you want to try again or what to do next.

  Any help would be greatly appreciated, but nothing technical massively please!

  Thank you

  Nigel.

  Hello Nigel,

  I would recommend installing either of these updates at the same time until you see this behavior.

  When this occurred, use system restore to go back to when the last update was installed and can hide the update, which is the origin of the problem.

  Best regards

  Matthew_Ha

• Error fatal c0000022 after the installation of Windows updates.

  Original title: error fatal c0000022

  Hello

  I was running an update on my windows computer and it crashed. My computer came into repair mode, but when performing a restore of the system, he said:
  error 0xa - a patch prevents system from starting normally

  It then close and when it is restarted app updates he says:
  The fatal error C0000022 operation apply update 107860 105136.
  Any help or advice would be much appreciated.

  Hi Emily,.

  Thanks for posting your question in the Microsoft Community Forums.

  According to reports, after the Windows Update, receiving the fatal error C0000022, the computer crashed and entered into repair mode.

  It would be useful that you can answer questions to help you best.

  1 update you tried to install?

  2 have you tried to run safe modesystem restore?

  If you are unable to boot in normal mode, then refer to section and try the steps to solve the problem.

  Advanced Troubleshooting for General startup problems in Windows XP

  Important: Change the BIOS (Basic input output system) / Semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Note: The above link also contains measures to run the disk check. Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Hope the helps of information.

  Let us know if you need help with Windows related issues. We will be happy to help you.

• sprtcmd.exe error after the installation of windows updates.

  I installed the windows updates. now I can't connect to internet at all and when I reboot it starts with the sprtcmd.exe .net framework initialization error

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understand the Extras in Windows Vista and Windows Update info is at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner