After the installation of Win 10, iTunes not autolaunch iPhone plugged in USB

Similar Questions

• Bat button fn - b Audio does not work after the installation of Win 8.1

  I read here about what is a problem.  I tried about 4 things without success, so I am posting this!

  I have beats HP Envy edition 14-2166se laptop which works entirely 8.1 update Win and using the audio driver sp63555.

  Everything works including the audio beats program just cannot move to the fn - combo button b or to disable the function controller audio beats. Any help would be great!

  Hello

  In this case, try the following.

  Open windows control panel, open programs and features, right click on the "HP System Event Utility" entry and choose uninstall.

  Once this done, reboot the laptop and let Windows load completely for a few minutes.

  Then, download and install the software version of HP Quick launch on the following link.

  http://h30642.www3.HP.com/pub/SoftPaq/sp56501-57000/sp56929.exe

  When the installation has finished, restart the computer again and let Windows load fully before checking the key combination fn + b.

  Kind regards

  DP - K

• Want to go back for Win 7 after the installation of Win 8

  Hello!

  2 years ago, I bought a toshiba laptop satellite L series.
  It came with a win7 64 bit os and a folder HDDRecovery on hard disk, no cd.

  I have used this cover several times before, no problem with that.

  Then I bought 8 Win and installed on my computer, removal of Win7.
  But I want to go back to Win7.

  I tried to press 0 at the beginning for the recovery, but it did not work. Pressing 0 will not activate HDDRecovery

  In addition, F8 at startup no longer works with the advanced startup options. I tried to copy all the contents of the folder HDDRecovery on a usb key and start with that, but he said: "no operating system found, displug all devices and restart etc.»

  So, the problem is, I can't use HDDRecovery. It is a record around 8 GB. I have it, but can not activate the recovery.

  I hope some1 can help

  Thank you

  Hello

  Looks like you made a BIG mistake because you have not created the recovery din mentioned user manual disc / reminder on screen, etc.

  The fact is that recovery of HARD drive was an option of additional recovery next to recovery disk but drive HARD recovery does NOT work after the HARD drive has been formatted, modified or another operating system installed.

  If not, you have just one option: you have to order a recovery disc that contains Win 7
  http://backupmedia.Toshiba.EU/landing.aspx

• Satellite P855-31V: some problems after the installation of Win 8.1 and drivers

  After that installation of 8.1 of Windows and updated drivers have problems:

  1. the switch market/no work
  2. flight mode button not work
  3. ECO button not work
  4. applications not available menu home

  Notebook * toshiba satellite p855-31v *.

  Could you help me please?

  Usually very important to install and update the drivers in the correct order.

  The + installation instruction doc + you can find on the page of the Toshiba UE (Windows 8.1 update) driver provides this order:

  1 Intel Wireless display uninstall
  2 windows 8.1 update to install
  3 TOSHIBA Assist Desktop Upgrade
  4 Intel Display Driver upgrade
  5 NVIDIA Display Driver upgrade
  6 Intel Rapid Storage Technology driver upgrade
  Update 7 Synaptics Touch Pad Driver
  8 update of Realtek Wireless LAN Driver
  9 Intel PROSet/Wireless WiMAX software update
  Update the driver from Tuner DVB-T/ATSC of 10 YUAN
  Update driver TOSHIBA 11 Support
  Upgrading TOSHIBA 12 system pilot
  TOSHIBA 13 function key upgrade
  14 TOSHIBA eco Utility v2 upgrade
  TOSHIBA 15 fingerprints digital utility upgrade
  TFPU 16 WBF deleting fingerprints tool upgrade
  17 TOSHIBA HDD Protection upgrade
  18 TOSHIBA VIDEO PLAYER Upgrade
  Update of the 19 TOSHIBA Blu - ray disc player
  20 TOSHIBA PC Health Monitor Upgrade
  CyberLink MediaShow 6 21 for upgrade TOSHIBA
  ArcSoft 22 TV5.0 update
  Plug-in for Windows Media Player upgrade 23 TOSHIBA resolution +.
  24 TOSHIBA Media Player by TrueLink + Upgrade sMedio
  Update 25 TOSHIBA Service Station

• the configuration after the installation of forms 11g has not

  Hi all
  I was installed forms and reports 11 g successfully.
  WebLogic: 10.3.2
  Forms and reports: 10.1.1.2
  
  My problem, progress of configuration does take long time for the "AdminServer restart" task and I expect a lot of hours
  and still no progress
  
  Please help me
  
  Best regards

  FormsEleven - Posted the: December 7, 2010 04:46

  I think that Windows 7 is supported as a developer box. This means that you can install EM and other components of the system.
  Simply select forms & reports execution time and builder and your configuration must go through the fine.
  >
  In fact, forms 11g is the only version of forms/States manufacturers certified for Windows 7. The key is to open the properties of the SETUP.exe and select "Run this program in Compatibility Mode for Windows XP SP2" and change the settings for virtual memory (VM) to manual and specify a setting of at least 1024 MB VM. The Oracle installer cannot detect the settings of the virtual machine when Windows automatically manages the parameters of the virtual machine. After you have properly installed and configured WLS and forms/States, you can change the setting of the virtual machine to run Windows.

  user1079072 - posted: December 7, 2010 06:55

  I'm install forms 11g for reason to use shapes and generating reports and I have no need for forms or States >
  If you plan to run a form or a report of builders, then you need to forms and reports Services installed and configured successfully. If you do not have to run a form or a State of builders, so it is not important for these services must be configured.

  user1079072 - posted: December 7, 2010 01:43

  I select portal and discoverer in the installation
  I didn't OID or a proxy server
  I have install weblogic, forms and reports to the same machine >
  After installing Weblogic Server (WLS), blew the WLS configuration? If you have run the configuration, it is probably the reason for the failure of 11g Oracle Fusion Middleware (OFM) configuration. According to Oracle install instructions for OFM 11 g, you ignore the configuration of WLS, as 11 configuration process g of BCI will perform all the necessary configuration for WLS and BCI. (Take a look at the document My Oracle Support: how to install Fusion Middleware 11.1.1.1 / 11.1.1.2 reports only [854117.1 ID] for detailed installation instructions and forms).

  Hope this helps,
  Craig B-)

  If someone useful or appropriate, please mark accordingly.

• Tecra Z50-A-11 q - slow start after the installation of Win 8.1

  Today, I installed Windows 8.1 CD. Also, I followed the instructions and had a old BIOS in the UEFI.
  The installation has been successful, but now the BIOS starts slowly. After almost a minute to look at the Toshiba logo, Windows 8 starts.

  I can't find the solution.
  There is one thing that is strange: I see several partitions on the hard disk, in the following order:
  1.00 GB (OK, recovery partition)
  100 MB (EFI system partition)
  455,46 NTFS
  9.08 GB (OK, recovery partition)

  Help or advice welcome.

  Thanks & greetings
  Maurice

  Solved, because after installing updates Windows 196 he starts suddenly fast. (VERY fast)

• After the installation of Win 8.1, Acrobat 9 Pro suddenly does not work

  I have CS4 Web Premium and Acrobat Pro v. 9.5.5.  I bought a new computer to window 8.0 90 days ago, installed subsequently, active and everything is fine. Yesterday, I upgraded to 8.1 Win. Now, when I opened Acrobat Pro, I get a message saying that it has been installed as part of a suite and open another program in the first sequel. When I click OK, Acrobat is closed. I tried to open almost all other programs in the suite (bridge, Flash, Photoshop 64-bit), they run OK, but Acrobat will not always work, and there is no activation message.  I checked my Adobe account, and my version of Acrobat 9 Pro is still listed, with serial number.

  I am very disappointed, because I use Acrobat Pro a bit, and currently it will not open at all. Other that call Adobe to help (no free support # listed), with the help of discussion online (no link available), or by e-mail with them (no address listed)... What can I do to "activate"?

  I tried open Acrobat Distiller and get the same message, but when I close it, I see a brief flash of what seems to be an entry with the substance of the activation box.  It only appears for the second half, so I can't do anything with it.

  The process of installation and activation for Acrobat as part of the CS is different from that of a stand-alone Acrobat. First of all, the issue of opening another application in CS is common (not sure if she should remain open when you start Acrobat. You should be able to get more information about the CS forum. You can also just try a repair. Do not forget that Adobe will not doubts for you AA9 on Win 8.1 since they are not listed as compatible (this does not mean that they do not work together, but they are not certified for this combination). It may be that Win 8.1 added some hooks than messes up Acrobat. It might be time to move on AA XI. AA9 is the oldest product that qualifies for the upgrade.

• Satellite L300D: After the installation of Win 7 new webcam does not work

  I have toshiba satellite l300/l300d laptop series I just install windows 7 Home premium software camera assistant does not work how can I solve this problem my guide thank you

  Hi rahmmar,

  > software assistant camera does not work
  Does that mean exactly?
  You get an error message during installation or what exactly is going on?

  On the Toshiba driver download page, I was able to find a driver of the webcam for Satellite L300D and Windows 7 32-bit. Have you tried this version?

• Computer does not start after the installation of Win XP SP3

  original title: ServicePack 3 does not work

  After loading service pack 3 my computer does not upwards, unless I use safe mode. It restores not to any restore point. I uninstall and go back to service pack two and get constant reminders to update three when it won't work. After saying it works fine if a little slow in two so is there any point of update.

  Recently, I reset my computer to factory settings to erase the disc from loads of unwanted waste and programs. Reloaded ServicePack two, he wouldn't go back with gel. After reading the old posts, I found a link to Jespers blog. It contained a small tool that intelPPM problems detected and then given the option to turn off the setting. http://msinfluentials.com/blogs/jesper/archive/2008/05/08/does-your-amd-based-computer-boot-after-installing-xp-sp3.aspx.

  This fixes the problem and service pack three charges and now works fine. The tool is loaded in seconds.

• Satellite P750 - 13G - media keys do not work after the installation of Win 7

  I yesterday "Toshiba P750 - 13G" for computer laptop (edition of the European Union) has purchased and installed Win7 x 64 ultimate equal right, because I was on the pre-installed too much waste.
  Since then, however, work 7 special keys (play / pause, cut...) no more. How can I solve this problem?

  And could someone tell me what I install everything in order so that I can use all the features actually?

  Thank you and sorry for my bad English...

  Hello

  > and installed Win7 x 64 ultimate equal right, because I was on the pre installed too much waste.
  Isn t easier to remove that software of the parts that you don't need and to clean the registry with CCleaner to do a full clean install?

  > Since then, however, work 7 special keys (play / pause, cut...) no more. How can I solve this problem?
  The Toshiba VAP (value added package) must be installed to get the buttons working again
  Have you tried that?

• After the installation of Sierra, calendar does not work

  After installation of Sierra, when you open the calendar on my Mac, missing entries and the screen is frozen with the comment 'Moving calendars to the server account.' I signed that I the cloud to see if it would help, but I still have this problem.

  Hello and welcome to Apple support communities, Stanley Star.

  If I understand your message to the right, at the opening of the calendars for the first time after upgrading to Mac OS Sierra, you are missing calendar events and the app is frozen with a message saying "moving to Server account schedules. Calendars, this is one of my apps used on my Mac, so I certainly understand the importance of having the opening and operating as usual. I'm happy to help you to turn it on again!

  Icloud and a signature was an excellent step to try. Here are the steps I recommend to do next:
  

  1. Check that the date and time are correct in your Mac by following the steps in macOS Sierra: set the date and time on your Mac.
  2. Close the present calendars on your Mac. If you are also reminders, close that as well as reminders and schedules work together. If the calendars close normally, will not force close it by clicking the  in the upper left corner of your screen, select force to close, select the calendars in the list of open applications, and then click the button close Force.
  3. Go to System Preferences > iCloud and uncheck the boxes next to the calendars and reminders.
  4. Restart your Mac.
  5. A times restarted, open again your calendar application, select "Calendar" in the Apple menu bar in the left corner of your screen, select "Add an account", choose iCloud and sign in with your Apple and the password.
  6. Give your calendar some time to sync and charge all your data. Once it is loaded successfully, and you can see all your events, open the reminders and do the same steps for signing in iCloud there are also well.

  Thank you for using communities of Apple Support.

  Take care.

• Unknown device on system compatible ACPI Microsoft to HP M6 1045DX after the installation of win 8.1 heavy

  On Device Manager in the computer management, it shows device unknown on system compatible ACPI Microsoft to HP M6 1045DX after installation win 8.1 heavy. hope someone can help me solve this problem

  Hello:

  You need this driver...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-123643-1&cc=us&DLC=en&LC=en&OS=4158&product=5312254&sw_lang=

• After the installation of this product does not last installation. Reinstall does not help.

  Have installed download. Get start-up do not last message program. When asked what I seen, I check the Yes box.
  Download the new features screen.
  When I leave this screen always enter loop to say not last etc.

  It - http://www.google.com/firefox - is the old Page to start Firefox used by the Firefox 3.6 and earlier versions of Firefox. I don't think that it is maintained by Google and Google assumes that you are using an older version of Firefox.

  From version Firefox 4, Firefox uses a 'local' with the address Start Page of Subject: House. It looks like the old start Page, but this isn't exactly the same thing.

• Portege Z930: How to install Win 7 after the installation of Win 8

  Hallo!

  There are a few weeks upgraded Toshiba Portege Z930 to Windows 8. Before the upgrade made the backup of Windows 7 on USB flash and it worked. Now recovering Win8 to Win7... Recovery starts fine - choose 'out of box' recovery and get ERROR 05-0172-0001.

  How to return to Windows 7?

  Hello

  I guess that your BIOS contains the option to switch between the UEFI and BIOS of the CSM.
  It must therefore return to the CSM BIOS and must disable secure boot if it has been previously activated.

  Then you can reinstall Win 7

• Satellite U500-115 - unknown devices after the Installation of Win XP

  Hello

  I just installed Windows XP on a Satellite U500 - 115 (PSU5EE) and cannot get rid of several unknown devices in Device Manager.

  Before to install the operating system, I changed settings AHCI in the BIOS to Compatibility-Mode (IDE), so I don't need to inject the SATA driver during installation.

  These are the unknown devices:

  ACPI\PNP0C32\1 (location: Intel ICH9M LPC Interface Controller - 2919)

  ACPI\PNP0C32\2 (location: Intel ICH9M LPC Interface Controller - 2919)

  ACPI\PNP0C32\3 (location: Intel ICH9M LPC Interface Controller - 2919)

  ACPI\PNP0C32\4 (location: Intel ICH9M LPC Interface Controller - 2919)

  ACPI\TOS6205\2 & DABA3FF & 0 (location: System compatible ACPI Microsoft)

  Of course, I installed driver chipset and graphics driver from the toshiba download page, but the unknown devices are still there! Can you please tell me what kind of driver I need to install ACPI devices - and get rid of these unknown devices?

  Thanks in advance,
  Hans

  Hello

  In my opinion the unknown devices belongs to the SATA interface controller and these appear as unknown device because you have installed the XP compatible mode.

  Try to install the Intel Storage Manager driver.

  ACPI\TOS6205 device can be a Bluetooth device.
  You must install the battery Bluetooth to get rid of unknown device.

  welcome them