After update Dreamweaver CC 2015.2, overview of device does not and one external monitor

Similar Questions

• Windows does not detect the external monitor after Blue Screen of Death

  Hi guys,.

  I currently have a problem with my second monitor, I installed the monitor (Acer G276HLA), it worked perfectly for about a month. Today, when I was working with SolidWorks, blue screen of death appeared 2 times and I have to restart my laptop. After the reboot, Windows does not detect my second monitor more, I tried my best but no luck, please me have this problems.

  I use an HDMI cable to connect the laptop and the screen...

  Best regards

  Hyouka

  Personal laptop is limited to the installation of other equipment, graphic monitor (s) push resources. If ram memory

  is maximally, & the BIOS settings are set to a different monitor, Direct X updates, graphics software are updated, then

  We should be able to run a reg monitor... Chk, go in run or cmd, type: DXDIAG run Direct X.

  Also, the BIOS settings are critical, uninstall the default, add new ones.

• Photoshop cc 2015.5 Overview of layer does not

  I'm having a problem with the new version of Photoshop 2015.5. 'The eye' on the layers will not work. An example is that I can add a curves layer. Make an adjustment. I can clearly see the adjustment that I just made. But when I click on the eye to activate the layer power on and off. Nothing happens...

  I tried this with other adjustments and layers of images as well.

  I can disable all layers and still nothing happens. The only way I was able to get the preview to update is to go to another file open in Photoshop and back. Of course not an ideal way to work.

  I have this problem in the new version. I am currently using Photoshop 2014 because of this problem and works fine.

  Any suggestions?

  Thank you.

  Mark S.

  Have you tried to reset your preferences? This solves a lot of weird problems.

• CS5 after update to bld 4964: drag the divs PA does not work

  Now, noticing with some divs PA, I can't drag them into position in Design view. What is happening is the shaking of the div and jumps outside the relative container. I have to go to the code view to the div in place correctly.

  Not a huge thing, but you know how a mouse can drag and drop something... Well, the real problem is that I can't "Undo" everything that's happened.

  So, if intentionally or by accident is not serious... by dragging an AP div in design mode (regardless of distance) will remove its relative container and paste it into the measure. And command-z don't revert to the last State.

  Has occurred after update to get HTML5 integration.

  I'm on the Macintosh version.

  Does anyone else have this problem?

  Is it possible that you have checked the option "Prevent overlaps" displayed on the Panel Elements PA?

• Update of Lightroom 2015.3 release - import function does not work

  I've updated to the latest version of Lightroom 2015.3 last night I wanted to go back to the old import screen. This is the message I get when I click on import

  An internal error has occurred

  module 'ImportCatalogDataHelper' could not be found:

  No field package.preload ['ImportCatalogDataHelper']

  No file "." / ImportCatalogDataHelper.so'

  No file ' / usr/local/lib/lua/5.1/ImportCatalogDataHelper.so'

  No file ' / usr/local/lib/lua/5.1/loadall.so'

  nothing happens-my only choice is to close this box.

  Does anyone know how to fix this?

  I tried to find someone to email or ring, but adobe just has no one to contact in any form. Very very frustrating!

  Leone

  Hi Leone,

  I ask of you uninstall and then reinstall Lightroom on the computer once, it should solve the problem.

  Kind regards

  Tanuj

• Update Dreamweaver CC 2015 is available outside the cloud for the stand-alone version of CS6 existing office?

  Update Dreamweaver CC 2015 is available outside the cloud for the stand-alone version of CS6 existing office?

  CS6 was the last of the perpetual licenses. From now on the subscriptions only.

• After updating photoshop cc 2015 it keeps closing.

  After updating photoshop cc 2015 it keeps closing

  Hi Gigi,

  The answer to your question depends on the details you provide.

  You use Windows or Mac?

  What graphics card do you use?

  It crash during launch or while closing Photoshop?

  Have you tried to uncheck the graphic processor of preferences > performance?

  Please post on the Adobe Forums.

• After updating to Itunes 12.4, my Ipod nano will not synchronize podcast.

  After updating to Itunes 12.4, my Ipod nano will not synchronize podcast. All the old podcast are on the Ipod, but it syncs new. The ITunes software fired again podcast, but they are not transferred to the Ipod.

  Check your selections of synchronization on the podcasts of the device tab. It seems that iTunes sometimes forget.

  TT2

• Microsoft Update for hp LaserJet 3015 PCL 5 driver does not install in Windows 7

  I use Windows 7 update.
  Microsoft Update for hp LaserJet 3015 PCL 5 driver does not install. He says 1 optional update is available almost every day, then when I try to install, it does not install and it says that the update is not necessary. Even once when I check updates, it says 1 optional update for the printer is available from Microsoft. And the story continues. I tried to reinstall the optional update, but the same problem persists perennielly

  Is this the driver you are looking for?
  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=503519&prodTypeId=18972&prodSeriesId=503548&swLang=8&TaskID=135&swEnvOID=4062

  Looking for HP for the pilot because it is better to get these live drivers from the manufacturer. TaurArian [MVP] 2005-2010 - Update Services

  No, these aren't the droids, uh, I mean the drivers he was looking for.

  In fact, it's better to get the new drivers from the HP website, you will notice the link you provided that the options only are available for this printer under Windows 7 drivers universal. I regularly have problems with universal drivers and strongly recommend to avoid as much as possible.

  I agree with the question of the original poster, which, after more than two years, remains unanswered by Microsoft. It seems that MS has a driver PCL 5 (not universal) updated specific 3015, but it fails to install the Windows Update control panel. I finally gave up on it, right click on the update and selected the option to hide it from view.

  Why bother with a solution when I use the button "Sweep-It-under-the-carpet" practice of Microsoft?

• Updates do not install, Sections of Vista does not and cannot start the Audio Service

  I try to install the updates on windows update but important as the service package 2 do not work, they start then stop and say failed code "WindowsUpdate_80070643"

  boxes keep popping up saying some files are damaged or not installed properly and that I should reinstall as a file call... system32\AVRT.dll. Windows Media is not no longer works.

  My Audio service is not running, I'm not sure that there is a problem in microsoft windows but the button to switch on the audio does not, and a box pops up saying it does not yet have another pop up says that everything works.

  any help? Please

  Hello
   
  a. updates have you tried to install?
  (b) button to switch on the audio of your computer are you using?
  c. what exactly happens when you try to run any audio/video file?

  You can try the steps outlined in the article below and check if this help.
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070643

  For audio problem you are trying to run the troubleshooter which may help. It search common problems with your volume settings, your sound card or driver and your speakers or a headset.

  1. open the troubleshooting of Audio playback by clicking the Start button, then Control Panel.
  2. in the search box, type troubleshooting, and then click Troubleshooting. Under hardware and sound, click on the audio playback problems. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

  You can also try to update check you and sound card driver if it works. The article below will help you do.

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Also, check if the following services are set to automatic.
  a. Windows Audio
  b. Windows Audio Endpoint Builder

  Here's how:
  1. click the Start button, type services.msc and press ENTER.
  2. go to any services mentioned above at the same time, right-click on it and select Properties
  3. click on the tab general, select automatic for startup type. Also click the Start button, if it is not started.
  4. click the Dependencies tab and make sure that all addictions services are set to automatic. Then click on the OK button.

  After return to that exact error messages we can help you better.

  Let us know if it works.

  Kind regards
  Umesh P - Microsoft Support

• After hybernation, all usb and wifi mobile devices does not work

  Original title: Hybernation question
  After hybernation, all usb and wifi mobile devices does not work. Similarly, it is not stop as well. I turn off the power to the network option all usb hubs. Problem however still closes. Please suggest. I have Windows XP Sp3 installed. All the drivers and the windows update is up to date.

  Hi Mirza.Shanawazbaig,

  1. what happens when you connect any USB device to the computer, or trying to shut down the computer after hibernation?

  2. do you have security software installed on the computer?

  3. did you of recent changes on the computer?

  4 when was the last time it was working fine?

  Method 1

  See the below Microsoft article and try the steps mentioned, check if it helps.

  Peripheral USB is not recognized when you attach it immediately after that your Windows XP computer comes out of standby or hibernation

  http://support.Microsoft.com/kb/871233

  Method 2

  I suggest that you download and install the updated driver for the network adapters and display on the computer by visiting the card manufacturer or computer manufacturer website manually.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

• I tried to roll back the last update of lightroom, but it says that it does not apply to me.  How to bring back the old version?

  I tried to roll back the last update of lightroom, but it says that it does not apply to me.  How to bring back the old version?

  Hi cherry_boy,

  6.3/CC 2015.3 Lightroom is now available - try to update to this version which includes the previous import feature, bug fixes and new support for photo/target device profile: Lightroom CC 2015.3 / 6.3 now available

  Concerning

  Pete

• My id does not and I want to update my applications

  my ID does not and I want to update my applications

  Until your ID Apple is set, you cannot update your applications.

  Try here: https://iforgot.apple.com

• Update of Firefox 4. Realize some websites does not yet work with FF4. How/where can I download the older version of FF?

  Update of Firefox 4. Realize some websites does not yet work with FF4. How/where can I download the older version of FF?

  ^ Why post if you don't have the answer to the question?

  You can get Firefox here 3.6.16.
  
  http://www.Mozilla.com/en-us/Firefox/all-older.html

• My update of Windows media player in windows vista does not play a mkv file.

  * Original title: about file mkv

  My update of Windows media player in windows vista does not play a mkv file, what do I do

  There are solutions out there, depends on how much you trust the software that you download. Here is an example for Windows 8, could work for vista too - make sure you have a full backup and AV before you start :)

  http://www.AddictiveTips.com/Windows-Tips/how-to-play-MKV-files-in-Windows-Media-Player-in-Windows-8/