After updated recent windows 10 keyboard not work properly in Firefox [and also Chrome but well on board].

Similar Questions

• Update of Windows XP does not work, error 0 x 80245003. Cannot be updated to SP 3, can't update IE 6 to IE 8. How to solve these problems?

  Update of Windows XP does not work. I tried the correction of the error 0 x 80245003 and nothing has changed. Fix, that it won't work because SP 3 is not installed, because of the Windows Update does not. I try to install SP 3 manually, then downloader windows will not install reference SP 2 must be installed. SP 2 is installed. So I tried several ways to solve this problem, and I keep running into roadblocks of Windows. Help, please.

  Hi my NameJoel,

  See the methods mentioned below and check if that helps.
   
  Method 1:
  How to troubleshoot an installation fails on Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950718
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Note: A firewall is software or hardware that checks information coming from the Internet or a network. Then the firewalleither blocks information or allows information to pass to your computer. If the information is blocked or throughdepends spent on your firewall settings. A firewall can prevent malicious software (such as worms) to access your computer through a network or the Internet. A firewall can also help stop your computer from malware sent to other computers. Windows XP, Windows XP Service Pack 2 (SP2) and Windows XP Service Pack 3 (SP3) include firewall software.
   
  See also:
  You cannot install updates from Windows Update, Microsoft Update, or by using the auto update after a repair of Windows XP after installing Windows XP SP3 immediately after a clean installation of Windows XP SP2 or
  http://support.Microsoft.com/kb/943144
   
  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717
  Note: Disable your antivirus software is not usually recommended, some software antivirus prevents certain system changing files. This can cause the Windows XP SP3 installation failure. To make sure that you manage to install Windows XP SP3, temporarily disable your antivirus software, including any third-party antispyware and firewall program. To do this, right-click on the icon for your antivirus program, and then click on disable. The antivirus program icon typically appears in the bottom right corner of the computer screen.
   
  Important: Make sure that you enable the antivirus software after you install Windows XP SP3.
   
  Hope this information helps.

• I can't get my updates. the Windows Installer does not work how to fix it

  I can't get my updates. and I can not install other programs. the Windows Installer does not work. How can I fix?

  http://support.Microsoft.com/kb/2438651#reso1

  See the above article, I suggest you use not Fixit, but it's your choice.

  For manually fixit it you follow the steps in the resolution.

  fyip

• Windows 10 does not work on my PC, and Windows 7 would not be updated

  I downloaded the Windows 10 Upgrade Wizard for free. However, whenever I run it, the error message appears saying "Windows 10 does not work on this PC", because "the display is not compatible with Windows 10. Check with the manufacturer for support.

  So, I contact the manufacturer of the display. Verified support Office my PC online and found the optional Windows updates 10 have not been installed. I tried to run the update, but the update of Windows crashes to download updates. I also ran a convenience store, but the resolution of the problems also got stuck.

  I would start by reinstalling the video driver

  Completely, remove the current (or software) driver and install the latest driver available.  For instructions on how to do read everything to update the drivers of my partner JMH3143 http://answers.microsoft.com/en-us/windows/wiki/windows_other-hardware/updating-a-driver/a5e6345e-af9b-4099-bef0-8d22254aa1c1?tm=1436753520149 here

• keyboard not working properly

  I HAVE a PROBLEM where the letters on the key edge that a number number only of central unit of the screen no letters for example k2 l3 if I hold down the fn key chicken that they wor2

  Hello

  1. What is the brand and model of the keyboard? It's a laptop or a desktop computer?

  2 did you any software or hardware changes to the computer before the show?

  3. who is the antivirus installed on the computer program?

  Method 1:

  Step 1: Safe Mode

  Start your computer in safe mode and check the number.

  To start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: Clean boot

  If you are not facing the problem in safe mode, and then put your computer in a clean boot and search for the question.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: once you are done with the boot, follow step 7 of article to put your computer to normal startup.

  
   
   
  
  Method 2:
  You can uninstall the drivers from Device Manager and reinstall the same thing again.

  1. click on Start, type Device Manager in the start search box and press enter.

  2 look for the device for which you need to uninstall the driver.

  3 right-click and select Uninstall and follow the on-screen instructions.

  4. restart the computer, if prompted.

  Install the latest driver again and check if that makes things better.

  See the links below for more details on the update of drivers:
  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  I hope this helps.

• Button hardware on Samsung slate Windows 7 does not work properly in Windows 8

  After you install the official update of Windows 8, the hardware button windows does not work properly. button lock display as well.

  Whenever I restart the system, everything works fine, until you put the sreen of. If you re-enable the slate (just energy), the buttons Don t work.
  Thus, windows hardware button offers just a double click to change the windows, but doesn´t take you of the subway home and the screen lock work doesn´t button at all.
  Someone at - it a solution for this problem? Would be nice, because I think that all the samsung slate 7 users have this problem.

  Hello. I don't know if you have this problem, but as long as no one have answered your question.

  I had exactly the same problem and after following the advice of the official windows samsung 8 upgrade support the Tablet worked perfectly.
  Just follow this link (http://www.samsung.com/us/support/win8upgrade/) and download the software to the 3rd market. It will install a lot of software and hardware upgrade for your Tablet and if it doesn't work as well for me it will solve all your problems.

• Satellite L670 - after Win 8 upgrade WIFI does not work properly

  Afteer upgrade to Win 8, the WiFi of my Satellite L670-128 has stopped working properly.

  The connection only works some time, usually only a few seconds before the connection is lost.
  After a few seconds or minutes the connection is restored, just soon to be lost again.

  Cannot download large files or even to see larger photos on normal web pages. Is there any Win8 driver for Broadcom coming 802.11n network card, or should I throw one 2.5 year old computer in the trash?

  Buy a usb-wlan card is not an option, as wireless mice is already "permanently" reserving one of the three usb ports and wlan card it would be just to the left...

  To my knowledge this L670 series isn t Win 8 taken in charge and this means that there is no special Win 8 drivers for this device, so I put t think you will find an another Win 8 driver for this WLan card.

  But do you really want to throw this laptop in the trash just because the wifi does not work properly running Win 8?
  The device was working properly under Win 7?

  I would recommend running a few Wlan test.
  For example; Disable wireless encryption on your router and Wifi connectivity with the open network do that just for testing purposes, perhaps you will need to change the type of encryption to test.

• GasBuddy web site not working properly with firefox, but works very well with Explorer

  I noticed when I load the site gasbuddy.comweb, it does not work properly. It does not load, simply do not perform as it should. When I try to use gasbuddy.com to explore 9, it works very well. I already tried to work in safe mode and it does not solve the problem with gasbudy.com. Any suggestions on how to solve the problem? I made a discovery, and I'm very careful about deleting my cookies. It seems that when I do the procedure, I'm losing too much info on some web sites - weather.comweatherunderground, etc.. Just do not know how to delete cookies for a problem with the cause of other problems? Thank you.

  Could check you your zoom here:

  ALT + v (open the menu Classic view) > Zoom > Zoom text only

  If I have this on (checked) then the middle column moves to the right and superimposed on the right column. If I have that turned off, then the page zoom correctly.

• OfficeJet 4500 G510g: software HP does not work after update recent Windows 8.1

  It is one of the three HP OfficeJet printers, which essentially has the same problem.

  This printer has been in service under window 8 and 8.1 of Windows (and before that, with Windows 7 and Windows XP) and fully functional (even if I only used print and scan with this printer), it is connected by Ethernet to my local network.

  After the recent updates of my system (I've enabled Windows update to automatically install all Important and recommended updates) the HP Solution Center are more recognized this printer.  My first action was to remove the device (using the control panel:connected and printers) and then attempted to add a printer.  Windows adds that a printer has failed.

  My second attempt was trying to add a device.  While that * fact * seem to succeed, the specific printer icon has been replaced by a generic printer icon and control panel:Director something did * not * show the printer in the list of devices!  She has shown a print to the printer queue, however.  HP Solution Center did not always recognize the printer.

  For my third attempt, I went to the HP support site and downloaded all of the following: OJ_AIO_4500_G510g-m_Full_Win_WW_140_408, printing HP and doctor Scan, the diagnosis of HP network and user HP printer Installation Wizard.  Using the full installation package, I uninstalled just the specific printer software first (leaving the solutions, digital imaging and other software in place - they are all used by my other printers as well) then tried to reinstall all the software installation package specific printer could not conclude, as he could not find the printer on my local network!

  Then I ran the Diagnostics of network user and found the 4500 (and a 6000, but not my 6300!  I had not yet done any changes to the installation of the 6300!)  The recommended action is to download the full installation package and run it.  Even if I had downloaded manually, I leave Network Diagnostics continue - download failed before finishing.

  Then I tried printing and Scan Doctor, who took nearly three minutes to tell me that the 4500 was not connected to my network.

  I then used the web server integrated for the printer by opening a browser directly session by its IP address.  The printer is online and processed as expected, but Windows still does bllind to it.

  I then tried installing printer Assistant, but she missed like printing and Scan of the doctor.

  Frustrated, I have re-directed the full installer, but this time after selecting the uninstall, I let him remove all HP software, knowing that I would then need to reinstall all three printers.  I downloaded the full package for my OfficeJet 6310xi and my OfficeJet 6000 - E609a (after checking that all three were supported by HP for use under Windows 8 and 8.1)

  Then I started the resettlement for all three printers procedure, starting with the 6300.  This facility has failed after leaving an Add-a-device shortcut on the desktop.  I tried to use the shortcut to add the printer, but he did not better than my first attempt

  Then I tried with the 4500 and 6000.  Even failure for each of them.

  I uninstalled all three printers, but became suspicious of something else than an obsolete installation package (even if I had downloaded the latest versions on the HP support site!)

  I made one more attempt to install the 4500 - after uninstalling just - and this time he only gave me the option of installing additional software!  Something had clearly been left (probably in the registry) the installation program takes to mean the printer was already installed!  So I canceled the installation attempt and decided to look a little deeper for the remains of pieces of attempts and prinior facilities.

  A search with the found registry editor a few each printer detritus left behind in the registry and search for foud Program Files, a large number of files related to the printers.  I was quite impressed by for each printer uninstall programs!

  In particular, in the SYSTEM ROOT and sections registry have been entered for the Olympic GAMES of 4500 and 6000 JO under the subsections MULTIFUNCTION.  Even administrators system to a Windows system cannot usually change permissions to delete these entries, I left those alone, but I wonder if this is what prevents the installation program to install the printing software.

  It is not only the installation and HP software support which is defective after the recent updates of Windows.  Such widely used and stable programs like Firefox, Thunderbird, and even Windows Explorer has been updated unexplainable in their behavior.

  I am desperate to get my printers fully functional again!  I strongly suspect a compatibility issue, but I really need advice here!

  -Barr

  Thanks again for this detailed information. If you feel my post has solved your problem, could you mark accept as a solution, because it will help others find the solution. Thank you.

• HP Pavilion 15 n208-tx restarts repeatedly after updated recent windows 8

  My laptop automatically installed the recent update of windows 8 at shutdown. After that, it is not start properly. It restarts several times only. A whole summer facing the similar problem. Please suggest.

  Thanks for the reply. !!

  I solved the problem myself.

  I was desperate to install update windows 8.1 KB 2919355 it offers a few extra features for users of keyboard and mouse. (I hate windows 8).

  After trying a few alternatives. I have factory rearm the system by taking the risk of losing a part stored personal data. (I lost the least that I used this laptop sparingly so far).

  After that reset facotry, I started to install windows first updates. All updates including KB 2919335 installed without any problem and the system worked very well.

  Then I started to install software such as Anti-Virus (Avast), video players and all the... (I restart the laptop after each installed software to find the bug)

  When I installed "Deamon Tools Lite", repeated the problem. So, I restored the system to the State before the installation of Daemon Tools Lite and now its works very well. !!

  Thus, the culprit was "Daemon tools lite".

• Jet 7 Tablet 5709: 10 Windows reinstall does not work properly; touch feature does not work after reinstalling HP sw

  I followed the steps of the http://h30434.www3.hp.com/t5/Windows/Windows-10-fresh-installation-on-the-HP-Stream-tablet/m-p/52038... to restore my tablet. The bottom line is - I use a keyboard and mouse, but tactile does not work, even after the installation of the various HP software specially required for the flow of data 7. When I start the Tablet, I can get the lock screen, but it cannot exceed.

  I tried to install Windows 8.1 USB, but I can't go beyond the screen who wants the product key. Should what product key I use? If I go back and reinstall Windows 8.1 the touch feature work?

  What can I do to get a running Stream 7 tablets?

  Hello Aberger,

  I guess that you have improved your 7 to 10 of Windows Workflow, but now you want to reinstall Windows 8.1, correct?

  If you went to go back beyond the 30 day trial period, you can use the image USB, you must have created 8.1 Windows before installing Windows 10.

  IF you have not done this media, you will need to clean install Windows 8.1 with Bing.

  You can not install ordinary Windows 8.1 copy unless you buy a new key.

  Machines that accompanies Windows 8.1 no longer a sticker with a key to the subject because the key is embedded in the bios. Installing Windows 8.1 with Bing will activate when he sees the key in the bios.

  During the installation process, you may need to click Skip to ignore entered the key until Windows has installed fully. If so, this will cause windows to enter a Limited State of Activation. When you connect to the internet to update, it will fully activate.

  You must contact the HP Support directly to the new copy of the installation media if you do not already have.

  Here is the link to contact...

  Contact HP worldwide | HP® official site

  Let me know if you have any other questions.

• Qosmio F50 - 10Z - after update BIOS lit buttons do not work

  TEMPRO alerted me on an update of the BIOS - bios - 20090415092322.zip - for 32-bit Vista, published April 15, 2009 for my F50 - 10Z.

  Since then, the enlightened "buttons" at the top of my keyboard no longer work - including, annoyingly, the key to turn the light off.

  Is that what I can do at this point? I tried a system restore but it did not affect the BIOS.

  I agree with Akuma. Now, you can try to set the BIOS to default settings and also reinstall the package of added value.
  This package also contains command buttons utility.

  Perhaps after having reinstalled it everything will work properly again.

  Please send us a feedback!

• Qosmio modem: after update the modem driver does not work

  Qosmio F10-145 with WSP2 MCE.
  Yesterday, I installed Phone Dialer Pro. Then, I realized that the microphone did not work with this program.
  The help file suggested upgrade modem driver that I then downloaded from the Toshiba site.
  It was the last time that my modem was working.
  I tried everything: from the update to restart in SafeMode as administrator, remove the driver and reinstall it from the Tools CD, use SFC and all I get is an 'access denied' message at the end of the installation process.
  System Restore doesn't work anymore as the last point of available restoration after the "Reinstall".
  I called help line of Toshiba which suggested resettlement of the entire system using the recovery CD... That would take days (programs, updates, mail files + digital certificates...).
  The last option that is somewhat like a spare wheel, as it has to install an external modem PCMCIA. This worked well but is frustrating because there is a modem already installed.
  Also, why don't I have any problem installing external modem, but cannot install one that is already there?
  Any suggestion?

  [Edited by: admin on 24 June 05 19:18]

  Hello

  As far as I know Toshiba Software modem is connected to COM 3.

• Update of Windows XP does not work, how do I stop the Office 07/10 updates?

  For these last months, the web version of Windows Update does not work with XP. When you click on the button for Express or custom installation, the stalls of system looking for updates. So I had to put windows to warn me of updates instead of going on the site, but now it keeps wanting to download me updates for Office 2007 and 2010, but I do not own these products (I use Office 2003).  I could not stop, even when I ticked the box does not warn me of those more. Finally I went to the site and found an option to disable Microsoft Update, which said I could always download the updates to the site, but I can't because he's trying to force me to re - download Microsoft Update.

  What is going on?  I don't like the new Microsoft Update as it keeps nagging me to download updates for the products that I have not yet owned. How can I update Windows XP only?  This is very fustrating.

  For these last months, the web version of Windows Update does not work with XP. When you click on the button for Express or custom installation, the stalls of system looking for updates. So I had to put windows to warn me of updates instead of going on the site, but now it keeps wanting to download me updates for Office 2007 and 2010, but I do not own these products (I use Office 2003).  I could not stop, even when I ticked the box does not warn me of those more. Finally I went to the site and found an option to disable Microsoft Update, which said I could always download the updates to the site, but I can't because he's trying to force me to re - download Microsoft Update.

  What is going on?  I don't like the new Microsoft Update as it keeps nagging me to download updates for the products that I have not yet owned. How can I update Windows XP only?  This is very fustrating.

  Hi Steve,.

  Follow these steps.

  Go to Start | Settings | Control Panel and double click on automatic updates. I'll explain why later.

  Then, tick the option at the bottom to turn off automatic updates, and then click apply/OK.

  Then, go to start, run, copy and paste this command and click OK: services.msc

  In the list of Services, you can see Background Intelligent Transfer Service ?

  Here's a pix what he looks like.

  

  If it is not listed, follow these steps to register the BITS service.

  Open the Windows search tool, copy / paste the following text, and then click Search: qmgr.dll

  Research should show this file in the following locations:

  C:\Windows\System32
  C:\WINDOWS\ServicePackFiles\i386
  C:\WINDOWS\system32\bits

  You might only see qmgr.dll in C:\WINDOWS\system32 depending on your configuration.

  Then, go to start, run and copy/paste: regsvr32 qmgr.dll and click OK

  Do the same with this file: regsvr32 qmgrprxy.dll

  Reboot the system and then copy / paste this command into the field run:
  %windir%\System32\rundll32.exe setupapi, InstallHinfSection DefaultInstall 132 %windir%\inf\qmgr.inf

  If you are prompted to insert the Windows installation CD, ignore this and in the dialog below, replace the path C:\WINDOWS\ServicePackFiles\i386

  If you could only see the file in C:\WINDOWS\system32, change the path to that instead.

  Restart the PC and then go to the Services and you should be able to see BITS in the list.

  Double click on it and then on the general tab, click the Start button to start the service manually. This is just a test to make sure that it works correctly.

  If you get 2 error: cannot find the specified file, click on start, then run again and copy / paste the following command, and then click OK:
  Tracking Add HKLM\SYSTEM\CurrentControlSet\Services\BITS\Parameters /v ServiceDll /t REG_EXPAND_SZ /d %windir%\System32\qmgr.dll

  Reboot again and try once more to start the PIECES. It should work fine now, but in the unlikely case where it fails again, run the following command, and then press ENTER:
  Reg add HKLM\SYSTEM\CurrentControlSet\Control\BackupRestore\FilesNotToBackup

  Reboot once more and then do the following.

  Go to this link and install the IE8 December Update:
  http://www.Microsoft.com/en-GB/download/details.aspx?ID=41404

  If you use IE7, use this link instead:
  http://www.Microsoft.com/en-GB/download/details.aspx?ID=41442

  Finally, go to the Windows Update site and you should be able to download normally.

  If this is the case, re - enable automatic updates in Control Panel.

• Lost my discs to fix computer - I keep getting errors in SQL Editor after updating everything, the patches do not work

  I've already updated and download the patches to remove HP with Windows XP, I always get error messages about SQL writer indicating the library has been corrupted and reinsert it doesn't tell me which library or where it is located and all microsoft help doctor's visits did not solve the problem nor has take it to a computer fix place0 which was a waste of $100,00 ~!

  Discs that I got for my computer does not appear in the shot and I have no way to fix my computer that I use for home based work.

  Could someone finally help me before I throw this computer out the window? It was more expensive that it was supposed to for be to work online - incidentally does not have Norton antivirus to prevent viruses!

  Hi Jen98051,

  1. when exactly you get the error message?
  2. What is the exact error message?

  We recommend that you restore the computer and check if the problem persists.
  see How to restore Windows XP to a previous state .
  b. Once you restore the computer to an earlier time, restart the computer and check the difference.

  If nothing works, then please provide us with more details on the issue, so that we can help you further.

  Visit our Microsoft answers feedback Forum and let us know what you think.