After updating my Portege R200 cannot connect to Windows XP

Similar Questions

• Error 641 cannot connect to Windows Installer and it could be installed incorrectly & error 80070641for Windows Update.

  Original title: Windows Installer does not properly.

  I am running with Vista SP 2 and since June, I have had many updates windows installation failures and get error 641 80070641 and just. Also have had difficulties to install other software. Tried to download Fixit but it wouldn't install and gave me an error 641 and message saying cannot connect to windows install and it could be installed incorrectly. I changed nothing because it has worked well. Also when I press start button to the right next to the stop etc. which is fior install and then stop includes an exclamation in yellow.  I hope someone can help, Murray

  Hi Murray,

  Have you followed the steps in your previous post?

  Because of Windows Installer, you can follow this link & check if the problem persists:

  Problems installing and uninstalling programs on Windows computers

  Hope the helps of information.

• Cannot connect because windows 7 does not recognizse my profile

  Original title: Mr. Wall

  Cannot connect because windows 7 does not recognizse my profile

  Hello

  References to Vista also apply to Windows 7.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. Safe Mode ADMINISTRATOR account has no password by default (unless someone has changed the password so it should be available).

  Some programs such as the Google Updater (if you added the toolbar Google, Chrome or Google Earth) has been known to cause this problem.

  Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  Difficulty "the user profile Service has no logon. User profile cannot be loaded. "Error in Windows 7
  http://www.SevenForums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have logged on with a temporary profile. "in Vista & Windows 7.
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the built-in Windows 7 Administrator account
  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

  Use the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after following the above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with the same password (or two with the same password) to use a test or fix the other.

  You can run the Admin account hidden from the prompt by if necessary.

  How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  If you cannot access your old account, you can still use an Admin to migrate to another (remember to always leave an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• Cannot connect to Windows XP SP3 because of malicious software, continues to connect then suddenly off. What I can do. Will do the same in Safe Mode.

  Cannot connect to Windows XP SP3 because of malicious software, continues to connect then suddenly off.  What I can do.  Will do the same in Safe Mode.

  Hello

  If you have another system then plug your HARD drive as a secondary to another system & copy below the files of this machine.

  C:\WINDOWS\system32\userinit.exe
  C:\WINDOWS\system32\winlogon.exe

  Paste these files in the same location in the C drive of the problematic computer.
  Search now for your question.

  If it won't, then I suggest you to repair your operating system.

  Thank you.

• Cannot connect to Windows Vista due to password problem

  I have a Dell XPS computer laptop model PP28L and run Vista Home Premium. When I bought the computer I bought in a pawn shop. Of course it was sold with no records at all. No recovery or restore of Windows disks. I have a valid Microsoft "proof of License'for my Vista Home Premium. Should I be reinstall Windows and if yes how I'd get the disks.

  * original title - cannot connect on Windows Vista Home Premium because someone changed my password, deleted my ID of the administrator and the guest connection. I am in the *.

  Your only option is to do a clean install of Vista.  There is no free, download of the disk.  Contact the manufacturer of the computer and they may be willing to sell you a set of recovery disks to reinstall the system (but you will need 23 digit product key to activate it in all probability even if sometimes it is not necessary when it is made with recovery on the same computer discs).

  Here is Microsoft's policy on software lost: http://support.microsoft.com/kb/326246 you can see is not much help.

  If you can borrow an installation disk of Vista genuine of the same size of the bit of ANYONE, you can use that with your product key to re - install the system and start over (you get a new administrator account and set your own password for him - or to leave empty that you choose).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• "We cannot connect to Windows Live Hotmail right now. Please try again later. »

  This just started July 1st or 2nd. I can't open or send e-mails. I get a yellow-forbidden message that say, 'we cannot connect to Windows Live Hotmail right now. Please try again later. "I was able to access it using another computer. I see a lot of people with this problem, but I see no solution. Appreciateyour would help considerably.

  Thank you

  Donna

  View all Windows Live and Hotmail questions in the appropriate forum found here:
  http://windowslivehelp.com/

• Cannot connect to Windows 7 after updates

  That's what I'm left with after updates ran Friday:

  • All accounts are locked (including facial recognition). Clicking on a user comes back to the same screen without ever asking for a password. It's as if all the accounts have been disabled.
  • Try to get to the command Mode prompt course taking me in the Safe Mode GUI log in the page with the same behavior.
  • Try to go to the "last good known Configuration" does exactly the same thing.
  • Recovery disc does not work.
  • Reset system known as the recovery partition is corrupted (this is an OEM Toshiba installation).

  Any suggestions? Since I can't go to the command line... It is extremely important that I again have access soon.

  Hardware information: Stock Toshiba Satellite A505-S6030

  You can try restoring the system as follows:

  1. Set your BIOS so that it uses the DVD drive as its primary boot device.
  2. Start the computer with your system repair CD. If you do not have one, ask a friend to burn you through the control panel / backup and restore. It takes less than five minutes.
  3. Press a key when prompted to boot from the CD.
  4. Select 'PC Repair' in the menu.
  5. Select 'Repair' when prompted.
  6. When you are prompted, select System Restore.
  7. Configure Windows to a point before the update on Friday.

  Since your recoery partition is now useless, it is essential that you create an image of your installation and store it on an external drive. Do this after you fix your current problem.

• XP - cannot connect to Windows Update (error Code: 0X80072EFE)

  OS: Windows XP: SP3

  I currently have problems to connect to Windows Update. I can't connect to the site at all and is the "this page cannot be displayed" whenever I try to open it. When you try to update Microsoft Security Essentials, I get error 0x80072EFE. I have already reset Windows Update by the fix in default and in aggressive mode with nothing doesn't.

  EDIT: I also ran several different viruses, malware, and trojan scanners so I'm probably clean them.

  PART A: Applications, (Norton and McAfee) are known to not uninstall (or upgraded) themselves.

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. double-click on the file that you saved in #1 above to run the utility. DO TAP not your keyboard until the race ends, then restart.

  4 reset the Windows Update components (again), restart & test: http://support.microsoft.com/kb/971058

  PART B: If no subscriptions of your previously installed antivirus applications expired (if only for a few hours or days) before you replaced by another AV application, see...

  Can I install Microsoft Security Essentials [or any other anti-virus/anti-spyware application] to clean my already infected computer?
  http://social.answers.Microsoft.com/forums/en-us/msescan/thread/87058857-D181-4019-a723-efd9a49d9275

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• IE (8) cannot connect to Windows Update

  I can connect is more to the Windows Update web page.  IE (8) connects very well to everything else.  I tried all the fixes I have found in the knowedge base to try to solve this problem.  I ran the malware removal of MS SW tool.  There are a few problems and withdrawn.  I ran Malware Bytes, AVG and the window update utility "fixit".  It also won't work if I go directly to the Windows Update Web page.  It fails after the initial check to see if I have the good SW to run it.  Currently, I can't even view the history of installed updates.   I'm looking for any suggestions to fix this problem.   Thank you.

  Update: the problem has been fixed.  Last night, with the help of technology Microsoft Windows Update try several things to solve the problem, we finally have downloaded and run the application Kaspersky TDSSKILLER what found and hardened rootkit infection: Alureon.

  After re-booting, I connected to Windows Update and downloaded updates of August successfully.  Then, I removed my AVG antivirus (which found nothing previously reported) and installed Avast.  A quick scan found that this same virus again in two places with another and successfully removed them.   Analysis again with all watch all clean now.   It's a nasty infection considering how tools couldn't find and the problems that he was originally.

• IE cannot connect to Windows Update on XP

  I'm trying to update windows via the site, but I get an error message saying "IE cannot display the webpage". The problem is that the Web page is down or there is a problem with my internet connection (which was given to zero yesterday).

  Hi mh124578m,

  ·         Other sites work well?

  In addition, check to see if this article helps you.

  How to resolve problems connecting to Windows Update or Microsoft Update

• Cannot connect to Windows 8 after refresh.

  Original title: could not connect to Windows 8 after refresh. I'm about to lose my mind!

  I am LIVID!

  I updated my NEW laptop because Windows 8.1 caused a cargo problems and crashes. NEVER AGAIN.

  After refreshing, I could only login with a local that gives me access to anything. My normal password and log in as administrator using stupid windows live.com password no longer works.

  So, I changed the password for windows.live on another PC.

  Now this new password no longer works. WTF?

  I can't access any of my stuff that was installed and stored under the original user/password.

  I can't add a new admin account, I can not do an another drink or fresh install. Nothing. He just guard invited me to the password that it won't take.

  Also, when I searched this problem on the web, I see dozens and dozens of links for this problem.

  BUT when I go to the link, it seems that they have all been removed from answers.microsoft.    TRY to HIDE the PROBLEM?

  Can someone tell me how to get out of this nightmare, so I can access my original account. PLEASE, I BEG YOU!

  Please, I beg you.

  Hello

  Sorry for the delay in response.

  Please take a look at this article and check if that helps.

  http://Windows.Microsoft.com/en-us/Windows-8/get-back-blocked-hacked-account

  http://Windows.Microsoft.com/en-us/Windows-8/forgot-Windows-password

  Here's another thread that has some good troubleshooting steps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-security/why-cant-i-sign-into-Windows-8-with-my-Microsoft/7662ea57-c321-4bfe-84e9-fc9ebb87a44b?TM=1355519512755#_self

  Hope that the information was helpfula and let us know if you need assistance in the future. We will be happy to help you.

• Cannot connect to windows to receive the updates and run windows Defender

  I am more able to receive windows updates or run my windows on my PC Defender. I had some malware problems that I removed, but

  After you have cleaned the malware I notice my windows Defender, windows update didn't work more and my printer software has been removed.

  If anyone can give some suggestions I would greatly appreciate the help and advice.

  Thank you

  Hi Byron,

  Thanks for posting your query in Microsoft Community.

  I do not understand that you are unable to connect to Windows to receive the updates and run Windows Defender and I'll be happy to answer your query.

  This could be due to any dispute of third party software or system files missing or corrupt. We will try the following methods and check.

  Method 1: Put the computer in a clean boot state and check.

  To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Place your system in the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform a clean boot in Windows

  Note: see 'How do I reset the computer to start normally after a boot minimum troubleshooting' to reset the computer starts normally after troubleshooting.

  Method 2: Run the System File Checker tool

  System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files.

  Press the Windows key + X , and then click prompt (Admin)

  Type the following command and press enter

  sfc/scannow

  Note: Do not close the command prompt window until the audit is completed 100%. The results of the analysis will be posted when this process is complete.

  From now on, try the methods above and let us know the result.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Portege R200 - Display driver for Windows 7

  I upgrades the operating system on my Toshiba Portege R200 to Windows 7

  TThe BONE determined my monitor as generic, it does not allow more than display settings. I think I need to replace the driver. Toshiba has no update driver for this model

  Is there any equivalent elsewhere, or with toshiba under other models?

  Hey,.

  I agree with you, santhi_G. I checked the site Web of Toshiba Portege R200 drivers and there is no available drivers for Windows 7 or Vista same. Only XP and Windows 2000 is supported. :(

  I discovered that the Portege R200 Intel graphics so probably has that you can find a driver directly on the Intel Web site. It's worth a try ;)
  [www.intel.com]

• Cannot connect to Windows 7 PC via Wi Fi

  I have a Stor.E TV + 2 TB I've tried everything but can't connect to PC Windows 7.
  However, it will connect to a Windows XP OK computer.
  Someone at - it solution

  I found that connecting to Windows 7 with WiFi or other is a business blindly. The reason is not clear, but probably because the Toshiba is not properly designed to be discovered by Windows 7. Even computers Windows XP need some software utilities installed to be discovered by Win 7. Often the Toshiba appears at the bottom of the page of the network as a disc that is present but cannot be discovered. Sometimes it will appear under network locations if you pass the Toshiba and the new to reset the IP address. In addition to the usual file sharing settings, the drive must be mapped under 'computer '. Very often when the player does not appear under the 'Network' locations, double click the disc 'Computer' open records even if it does not appear in the sites 'network '. Don't ask me why. I worked around this and other issues such as the inability to copy large files, without interface specified Samba, etc, etc.. I installed the updated software, but other issues have slipped now that I've never had before like files FLAC freeze the player and does not properly (noise spikes). In truth, unfortunately, is a * finish without any support, and should not be on the market. I can't even sell it because it wouldn't be ethical it land on a poor unsuspecting, but hours of frustration to work around these problems, just to be able to use it, is counterproductive. I'll be more careful next time in choosing a provider.

• 'Skype cannot connect' on Windows 10, Skype 6.2

  Hey there!

  I always use 6.2 and refusing to upgrade and it has always worked well, no matter what I did. It was all just 'good '. Today however it upgraded to 7. something without my consent. Immediately, I uninstalled and reinstalled 6.2. As he finished installing it I logged into my usual account, with all my friendslist be there. Suddenly it start my account and says 'Skype cannot connect' (Yes, of course, I saw how it could not connect...).

  Now to my actual question: is there a known way to always keep my old version and connect? To be honest, I stopped rather using Skype as a whole rather than updating to 7.Bloatware' only Adds * beep * (also suck some avatars round).

  6.14 Skype versions are now disconnected and will not be able to connect to the servers of Skype.