Cannot connect to Windows 8 after refresh.

Similar Questions

• Cannot connect to Windows 7 after update

  I have Windows 7 Home Premium installed on my Dell Inspiron desktop computer. The other day, I installed a few important updates from Windows Update. I decided to restart the computer and it says stop then I did on my xbox while you wait for reboot. After maybe 15 minutes I noticed the screen was the same and the computer restarted ever. The circle animated on-screen icon was more moving. I left alone for a while longer without change. I restarted the computer and noticed that it took much more time to start. Finally, I would like to get to the windows logo screen where the logo moves. The logo suddenly freezes and stays that way. I started in safe mode, and he says that recent updates have not succeeded and it was back the changes. I'm still not able to log in. I can boot the system in safe mode, but it does not recognize my mouse and my keyboard to use. I can not even find my OS drive to use. I am very frustrated. I've had this computer for only a few months. Any help would be greatly appreciated.

  You can probably fix this by using the system restore. Here we go:
  1. keep tapping F8 during the first phase of startup.
  2. select Repair from the menu.
  3. Enter the administrator password when you are prompted. It is often empty.
  4. When you are prompted, select System Restore.
  5. set Windows to a point before this problem occurred.

  If steps 1-3 does not work, you can do instead:
  1. put your BIOS so that it uses the DVD drive as its primary boot device.
  2 start the computer with the Windows 7 repair CD or with your Windows 7 installation DVD.
  3. Press any key when prompted to boot from the DVD.
  4. When you are prompted, select System Restore.
  5. set Windows to a point before this problem occurred.

• Cannot connect to Windows 7 after update November 2015

  After you install updates to windows on November 11, 2015, my system rebooted when prompted to and loaded windows up to the login screen.

  I have 2 accounts of users set up. A as an administrator and as a user with limited rights.

  I also have 6 machines which are all set in the same place that received updates.

  6 ALL now act in the same way.

  After selection of the user, users icons disappear just but normally at this point the password box comes upward, but after the update, the screen goes back only to the icons to logon.

  I tried safe mode, safe mode with networking, safe mode with command prompt and the ability to load the last known good configuration, but ALL have the same result, back in the log on screen.

  I use a VPN client mobile net movement, but I called the support for the net movement and they indicated that this is not a problem of netmo.

  I tried the default bios settings also.

  I don't have any ISO on USB, they are mobile units with no DVD. So I can't do a restore from the DVD system but could flash player if I had a.

  What was in this update and how to resolve this short of blow HD?

  All 6 machines do exactly the same after MS Updates, it is a problem of update.

  After a whole day troubleshooting, the following fix worked for me. Had to start by using a windows installation disc 7 to access command prompt and remove the package "KB3097877". Still called Microsoft, which offered to help "intensify" my problem if I paid $150 for a subscription.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-7-login-problem/51685076-e39f-42DE-B265-ca109ecfbd82?page=2

  Good luck!

• Cannot connect to Windows 7 after updates

  That's what I'm left with after updates ran Friday:

  • All accounts are locked (including facial recognition). Clicking on a user comes back to the same screen without ever asking for a password. It's as if all the accounts have been disabled.
  • Try to get to the command Mode prompt course taking me in the Safe Mode GUI log in the page with the same behavior.
  • Try to go to the "last good known Configuration" does exactly the same thing.
  • Recovery disc does not work.
  • Reset system known as the recovery partition is corrupted (this is an OEM Toshiba installation).

  Any suggestions? Since I can't go to the command line... It is extremely important that I again have access soon.

  Hardware information: Stock Toshiba Satellite A505-S6030

  You can try restoring the system as follows:

  1. Set your BIOS so that it uses the DVD drive as its primary boot device.
  2. Start the computer with your system repair CD. If you do not have one, ask a friend to burn you through the control panel / backup and restore. It takes less than five minutes.
  3. Press a key when prompted to boot from the CD.
  4. Select 'PC Repair' in the menu.
  5. Select 'Repair' when prompted.
  6. When you are prompted, select System Restore.
  7. Configure Windows to a point before the update on Friday.

  Since your recoery partition is now useless, it is essential that you create an image of your installation and store it on an external drive. Do this after you fix your current problem.

• Cannot connect to Windows 7 after Microsoft updates

  After the most recent series of updates to one of our laptops set up and configured, the office went into the log on screen. There is one main user on this laptop. When we click on the user icon, however, user, accessibility, and stop icons disappear for a few seconds, the animated 'wait' icon appears for a while, then the entire screen darkens, and this goes back in the log on screen. We are never faced with the prompt of password or any other message. This happens if start us normally or in Mode safe. We also tried to commissioning in the configuration "last good known", but the same problem occurs. We can enter the recovery tools, but the only available recovery seems to be the restoration of the original configuration of the C:\ drive.

  Is there a work around known for allowing us to open a session?

  Critical data are synchronized on a network drive, so there is little emphasis on this front. We would like to just avoid having to reinstall applications (office 360, Norton, etc.) which may require additional assistance to cancel lost installation.

  Richard Luketich

  Thomas Bidwell

  https://social.technet.Microsoft.com/forums/Windows/en-us/72ebe931-3dfb-4544-ad5e-64d0d46105c0/fix-for-Windows-7-touchscreen-users-kb3097877?Forum=w7itproinstall

• Cannot connect because windows 7 does not recognizse my profile

  Original title: Mr. Wall

  Cannot connect because windows 7 does not recognizse my profile

  Hello

  References to Vista also apply to Windows 7.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. Safe Mode ADMINISTRATOR account has no password by default (unless someone has changed the password so it should be available).

  Some programs such as the Google Updater (if you added the toolbar Google, Chrome or Google Earth) has been known to cause this problem.

  Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  Difficulty "the user profile Service has no logon. User profile cannot be loaded. "Error in Windows 7
  http://www.SevenForums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have logged on with a temporary profile. "in Vista & Windows 7.
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the built-in Windows 7 Administrator account
  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

  Use the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after following the above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with the same password (or two with the same password) to use a test or fix the other.

  You can run the Admin account hidden from the prompt by if necessary.

  How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  If you cannot access your old account, you can still use an Admin to migrate to another (remember to always leave an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• My firefox cannot connect to any network after upgrade to v36 but another browser in same PC ok

  My firefox I just upgrade automatically to v36, but borrowing is no longer able to connect to any web site after reboot. (Chrome and IE has no problem). I have try to disable the proxy and prefetch IP6 and does not help. In the even they, my PC has norton installed but does not have the configuration of the firewall. The upgrade of the software automatically, please provide fix ASAP

  HI andrewcsfan1,
  I understand that Firefox cannot connect to a network after update.

  • Difficulty of problems connecting to websites after Firefox update

  What operating system do you use? What is XP?

• Cannot connect to Windows XP SP3 because of malicious software, continues to connect then suddenly off. What I can do. Will do the same in Safe Mode.

  Cannot connect to Windows XP SP3 because of malicious software, continues to connect then suddenly off.  What I can do.  Will do the same in Safe Mode.

  Hello

  If you have another system then plug your HARD drive as a secondary to another system & copy below the files of this machine.

  C:\WINDOWS\system32\userinit.exe
  C:\WINDOWS\system32\winlogon.exe

  Paste these files in the same location in the C drive of the problematic computer.
  Search now for your question.

  If it won't, then I suggest you to repair your operating system.

  Thank you.

• Error 641 cannot connect to Windows Installer and it could be installed incorrectly & error 80070641for Windows Update.

  Original title: Windows Installer does not properly.

  I am running with Vista SP 2 and since June, I have had many updates windows installation failures and get error 641 80070641 and just. Also have had difficulties to install other software. Tried to download Fixit but it wouldn't install and gave me an error 641 and message saying cannot connect to windows install and it could be installed incorrectly. I changed nothing because it has worked well. Also when I press start button to the right next to the stop etc. which is fior install and then stop includes an exclamation in yellow.  I hope someone can help, Murray

  Hi Murray,

  Have you followed the steps in your previous post?

  Because of Windows Installer, you can follow this link & check if the problem persists:

  Problems installing and uninstalling programs on Windows computers

  Hope the helps of information.

• Cannot connect to Windows Vista due to password problem

  I have a Dell XPS computer laptop model PP28L and run Vista Home Premium. When I bought the computer I bought in a pawn shop. Of course it was sold with no records at all. No recovery or restore of Windows disks. I have a valid Microsoft "proof of License'for my Vista Home Premium. Should I be reinstall Windows and if yes how I'd get the disks.

  * original title - cannot connect on Windows Vista Home Premium because someone changed my password, deleted my ID of the administrator and the guest connection. I am in the *.

  Your only option is to do a clean install of Vista.  There is no free, download of the disk.  Contact the manufacturer of the computer and they may be willing to sell you a set of recovery disks to reinstall the system (but you will need 23 digit product key to activate it in all probability even if sometimes it is not necessary when it is made with recovery on the same computer discs).

  Here is Microsoft's policy on software lost: http://support.microsoft.com/kb/326246 you can see is not much help.

  If you can borrow an installation disk of Vista genuine of the same size of the bit of ANYONE, you can use that with your product key to re - install the system and start over (you get a new administrator account and set your own password for him - or to leave empty that you choose).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• "We cannot connect to Windows Live Hotmail right now. Please try again later. »

  This just started July 1st or 2nd. I can't open or send e-mails. I get a yellow-forbidden message that say, 'we cannot connect to Windows Live Hotmail right now. Please try again later. "I was able to access it using another computer. I see a lot of people with this problem, but I see no solution. Appreciateyour would help considerably.

  Thank you

  Donna

  View all Windows Live and Hotmail questions in the appropriate forum found here:
  http://windowslivehelp.com/

• When I connect to Windows 7 after that my laptop has been asleep, the Welcome screen will have 10 minutes to go beyond.

  When I connect to Windows 7 after my laptop has been asleep, the Welcome screen will block for always (10 + minutes). It does not every time, but maybe once all 5 or 6 times and it's happened lately. I can just shut the computer off and the newspaper with no problem after starting it upward, but I'm afraid, there may come a time where it does not work.

  I had this problem since I got my computer 2 months ago so I don't think it's related to what I have installed. Has anyone else encountered this problem and has found a way to fix it? Is this a common bug in all of Windows 7?

  original title: Windows 7 stuck on the Welcome screen

  Hello

  Safe mode - repeatedly, press F8 as you bootup. Another method is to start - type in
  Search-> find MSCONFIG in top box - just right-click on it - RUN AS Admin Startup tab
  -check the Safe Boot (network) APPLY / OK. Don't forget to change it if necessary.

  Try a system restore before what happened: (you can run system restore
  in the Windows as well however it sometimes works better in safe mode-
  repeatedly press F8 as you start.)

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  ==========================================

  If it is mounted on the homescreen?

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  
  ======================================

  You can try some of them in Mode safe - tap F8 repeatedly that you start.

  If you do not have a Windows 7 disc, you can borrow a friends because they are not a copy
  protected. The manufacturer of your system will also sell the physical DVD cheap since you already
  Clean Windows. You can also do an ERD on another computer.

  Try the Startup Repair - (if at anytime, benefit you from some, but not full access coming to Windows
  return and then try to startup repair.)

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Try the disk Options recovery or Windows 7 startup repair.

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  Also from the command PROMPT on the Console (if possible) recovery or a Windows 7 disc

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  Retry After Chkdsk startup repair.

  If after those you can try the system restore to fashion without failure or the valuation or Windows 7
  disc.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  --------------------------------------------------------------------

  If you need to repair disks - these help repair Windows not re-install.

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  ======================================

  If necessary:

  What to do if Windows does not start correctly
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Cannot connect to Windows 7 PC via Wi Fi

  I have a Stor.E TV + 2 TB I've tried everything but can't connect to PC Windows 7.
  However, it will connect to a Windows XP OK computer.
  Someone at - it solution

  I found that connecting to Windows 7 with WiFi or other is a business blindly. The reason is not clear, but probably because the Toshiba is not properly designed to be discovered by Windows 7. Even computers Windows XP need some software utilities installed to be discovered by Win 7. Often the Toshiba appears at the bottom of the page of the network as a disc that is present but cannot be discovered. Sometimes it will appear under network locations if you pass the Toshiba and the new to reset the IP address. In addition to the usual file sharing settings, the drive must be mapped under 'computer '. Very often when the player does not appear under the 'Network' locations, double click the disc 'Computer' open records even if it does not appear in the sites 'network '. Don't ask me why. I worked around this and other issues such as the inability to copy large files, without interface specified Samba, etc, etc.. I installed the updated software, but other issues have slipped now that I've never had before like files FLAC freeze the player and does not properly (noise spikes). In truth, unfortunately, is a * finish without any support, and should not be on the market. I can't even sell it because it wouldn't be ethical it land on a poor unsuspecting, but hours of frustration to work around these problems, just to be able to use it, is counterproductive. I'll be more careful next time in choosing a provider.

• Cannot connect on Windows XP

  It is the history of a problem of connection on Windows XP.

  First, you see a after starting Skype on Windows XP.

  1. Please open this URL https://pipe.skype.com/ in your Internet Explorer (you have to use IE because Skype depends on it)

  2 do not load, there is no lock icon in the address bar, and you get an error message

  (If you have a lock icon in the address bar and see a blank page so you don't have this kind of problem)

  

  3. first of all check you the computer clock, go to http://time.is/ , encrypted connections need a correct clock (+/-2 seconds are OK)

  4 make sure that XP supports SHA2 signatures support, download & install Microsoft KB968730 , you will need to provide your e-mail address and you will get a link in the email

  5. once ensure you THAT XP has certificates root to update, download & install the root certificates Microsoft

  6. can enable the TLS 1.0 Protocol and disable SSL 2.0 and 3.0 in the Internet Options of IE / advanced

  

  You're done! Skype needs to connect on the login server so you will be able to connect.

  +1 See older versions of Skype on this mirror site

  I forgot to mention the root cause:

  Skype turned off SSL v3 on its Web sites
  https://www.ssllabs.com/ssltest/analyze.html?d=pipe.Skype.com

• Qosmio G30 display flickering and cannot connect to Windows

  I have to press F5 to make the visible display each time that I boot. I thought that it was a software related issue and I tried to format the drive with recovery CD original. However, the screen keeps flickering of the stage of the BIOS.
  Now, it's even worse. The screen flashes when the turning on and I cannot Ouvrezunesession Windows MCE after formatted HARD drive.

  After reading the FAQ and related articles, I suspect that it was a problem of graphics (hardware).
  My graphics card is NVidia Go7600. Is this true, and it's a must to change the hardware (graphics card)?

  Appreciate your advice before contacting the local support team.

  Thank you very much!

  Hello!

  That s a strange question. Do you have the same problems on an external monitor?

  If a display is flashing, the screen itself is faulty, the FL tube is the cause of the error. I think that is the best, when an ASP (authorized service provider) checks your Qosmio G30.
  Here you can find one:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an ASP.

  Good luck

  Good bye