Slow WLAN connect to the router - Satellite Pro A200

Similar Questions

• Cannot install the Modem Satellite Pro A200 XP driver

  I'm a local network for Newbold College administrator. New mobile A200 and we need XP Pro on some of them. I tried to install the modem driver as one of the last drivers downloaded from the website of European support. I also tried the Canadian site as well.

  The driver installation program does not appear to do anything. I tried to manually install the driver for a Windows modem Agse/Toshiba software modem, but I have com port problems and I can not quire of the modem.

  Can someone help me please!

  Hello

  What to say; I checked the driver Toshiba Europe page and found all the drivers XP necessary and important for the Satellite Pro A200.

  Please note that the European driver Toshiba page provides drivers XP 3 different satellite Pro A200 series! There are PSAE1, PSAE4 and PSAE7 series.
  Please choose the right!

  In addition, you will find a txt file of installation instruction on the page of Tosh.
  In this file, you will find a good and important driver installation order! Please follow these steps!

  I put t know exactly why you get the modem com port problems but I guess a new installation of XP and the driver should fix this strange problem.

  Good luck

• Very slow to connect to the router WRT400N

  I use a Vaio laptop, running Windows 7, which seems to take a period of unusually long connection to one of the two wireless networks configured on this router dual band.  It connects so don't get me wrong, just about 45 seconds to a minute.  My other laptops seem to connect right away, so I'm not sure it's a router problem, but I would like to know.  Any help would be appreciated.

  On your windows 7, remove all wireless network profiles and try to connect again.

• Re: Satellite Pro A200 - no activity - nothing on the screen

  Hello!

  I have a lot of problems with the Toshiba Satellite Pro A200.
  Same problem for all: when you connect the power adapter led turns blue!
  When I press on "on" button the second led turns blue, the fan runs for a while, but there is not activity: nothing on the screen.
  No thing hard disk led...

  I have a lot of this problem with the Satellite A200. The motherboard is a LA - 3481P.
  I am an electronic engineer and I m specialized in laptop repair card main but I did not understand this problem.

  Can U help me telling me that maybe the defective chip?
  Thank you very much

  Hello

  I don't know if you saw that this forum is the forum of users and you should not wonder if nobody can give the exact answer. As an electronic engineer, you must know that no one can answer specifically and to find the good chip, you must run diagnostic tool.

  So I think that you need professional help. Try to contact nearest Toshiba authorized maintainer and ask for help.

  BTW: I am really interested about new comments here.

• Satellite Pro A200 where to download the recovery disks

  Is anyone know where (or if) I can download installation / for the Toshiba Satellite Pro A200 recovery CD.

  See you soon,.

  The recovery CD can not be downloaded!
  Must order it from the ASP in your country if you have damage or lose!

  But I really don t understand why you ask this question! These questions are answered several times! First check the existing threads before you ask for something!

  concerning

• Satellite Pro A200 - 1 MI - need driver for PCI memory controller

  I have the Toshiba Satellite Pro A200-1 MI (PSAE7E) having a problem with the PCI memory controller on my laptop.
  When I go to Device Manager it shows the question mark in the tab other devices and when I go, it is yellow? (question mark) and! (typical brand) to the PCI memory controller. I took and downloaded all the drivers of your site:

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp?service=EU

  for XP, but I'm not sure what kind of driver do I need to install for PCI controller memory, it is driver bios or something else? I just need to know what to install to overcome this problem with my device manager and the PCI memory controller.
  Thanks in advance!

  Hello akibono

  I imagine that you have installed Windows XP Home clean on your laptop and now you want to install all the drivers, tools and utilities. Am I right about that?

  In any case, after the installation of Windows XP Home edition you install all the drivers, tools and utilities in the order of the specific facilities. After doing this, everything should be OK and every hardware component will be correctly configured.
  Please install all the stuff as follows:
  WINDOWS XP HOME EDITION
  Driver Chipset
  Display driver
  Audio driver
  Driver modem
  Storage Manager
  LAN driver
  Touchpad driver
  WLAN driver
  Toshiba Assist
  Flash Media driver
  Driver webcam
  Hardware configuration
  Controls
  And so on

  I hope that everything will be OK.

• Unable to connect to the router WLan - Satellite L300D

  Please help me so that I have still a few hairs left!

  I installed WLAN driver on my laptop Satellite L300D with Vista Home installed.

  I see my network in the available connections, but when I go to connect, it will not connect.

  My other two desktop computers can connect to the router without a problem.

  Any suggestions?

  Thank you
  Neil

  Hello

  I think that you didn t try updates. Right?
  Therefore, my first recommendation would be an update of the BIOS and driver WLan.

  Check the current version of the BIOS that is available on your laptop. If the latest version has been released then update the BIOS.
  In addition, to download the latest WLan driver from the Toshiba WLan portal and to update:
  http://APS2.toshiba-tro.de/WLAN/

  On this Wlan site, you will find three different WLan drivers for three types of WLan cards. First check your wireless network card, and then use the right driver!

  See you soon

• Satellite Pro A200 cannot connect to the wireless network

  Hello

  I have a Satellite Pro A200 and Tuesday night I was able to connect to a wireless network. I received an update, rebooted and now it doesn t seem to work.

  I can see the wireless networks available via the Toshiba Radar but cannot connect to my usual wireless network.
  Also, the wireless network icon disappeared from my system tray and if I go to Control Panel/network connections, I can't even view available networks because there is no option to do so.

  Any ideas?
  the FN/F8 will work?
  Help! Please, I beg you!

  Have you tried using System Restore and restore the operating system on time earlier?
  Maybe this will remove the update installed, and you can again use the WLAN.

  Check it out.

• [Satellite Pro A200] - slow when problems of transfer and the warmth of the data.

  Hi people.

  I have a 1.5 years old Toshiba Satellite Pro A200 with 200 GB HARD drive standard. For some time, his behavior is just... weird.

  Sometimes the system slows down. She behaves just slow, it freezes frequently for a second when simple tasks such as entering the text. It; s busiest during intensive data transfers (e.g. copy files via FTP from my copy of the USB or LAN), but sometimes it happens even when no application other than Firefox does. It is not apparent, so I wonder - service it will take in terms of warranty (which means - is there a probability that you will say that everything is perfect and charge me for it?)
  The computer was once on the repair under warranty, they replaced the HARD drive with another. Is it possible that the other has problems as well (check S.M.A.R.T. discovers nothing). Or is it maybe faulty SATA controller?

  Another thing is the temperature. During the normal work (Internet, MS Word) two hearts runs at 60 * C. When the set temperature may exceed 90 * C and the computer sometimes shuts down. I guess the problem is dust accumulated inside the laptop but I do not see how can I clean.

  Go to the service of this kind of problems?

  Virus scanners can slow a system down considerably, what antivirus do you use?

  If you have a lot of programs installed, perhaps its time to back up your data and reinstall Windows. I do it myself every year since Windows tends to become bloated and slow after a while.

  With respect to the dust, you can Sauté using a can of compressed Air sprayed through the main entrance of air (when the system is off).
  Or if dust is really bad, you will need to send it to a Service provider authorized to do so and cleaned disassembled.

• WLan connected to the Satellite U400 PSU40C but no data flow

  Hey guys,.

  Hope you can help me with a problem I have with the wireless to my new laptop. I bought a Toshiba U400 PSU40C-08U01C.

  It came pre-installed with Windows Vista. Everything worked fine out of the box, wireless/Wired internet.
  I really didn't want to run Vista, so I formatted the hard drive and installed a new installation of patches to update w / all WinXP to SP2 (haven't tried the SP3).
  I managed to install most of the material on the laptop, all drivers worked well.

  Wired connection worked flawlessly - Marvell Yukon network card.
  However, I came across a problem with wireless connectivity. The map has proved to be an Atheros AR9281-AL1E (discovered that by running Everest Home, held a diagnosis on the machine).

  I found no drivers on Toshiba Canada site, since they are all INTEL drivers and do not work to install the drivers for the network card. I was able to google and get drivers for model AR9281 wireless. After installing, everything seemed to be good.

  The WLAN had no problem installing with this driver, I used windows to manage the wireless. I connected to my network w/WPA wireless security. He got a good IP and default gateway appropriate... but NONE GIVEN don't FLOW! Couldn't BACK out ping, was not able to surf. Could not access the home network, could not connect to the router. I know that's not the router, since I went back to cable on the laptop - worked well. Also the without wire is good, because I have two other laptops running smoothly.
  He was also a clean install so no security except for windows firewall software that has been disabled.

  Someone at - it had a problem similar to this? I will return to the Vista installation with the recovery disk and see if I can somehow find out what drivers he used to install the WLAN network card. If I can't get this to work, I can also install Ubuntu and try installing the WLAN network card it and see if I have some luck. Hoping someone can offer other things I could try.

  Thanks in advance.

  Hello

  It's really a good idea to install the recovery image again to see if the wireless card is working properly. Please post the result.

• Satellite L500D: WiFi remove connections to the router

  My bars of Toshi Saturday 1,2,3,5 equates to dropped the WiFi but when WiFi is at 4 bars, it's the best thing since the fire.

  Recently, my laptop started to remove connections to the router and the router is that a step of 4-5 come out in the kitchen of my house. And another problem is that my room seems to be a dead zone.

  If I turn on my laptop, I am required to get out of the kitchen and stand near the router until it connected, but if I'm sitting in my room, 3 bars, and said "(the WiFi name) cannot be detected/connected."

  Any who want to enlighten me on what's going on?

  Mr.Delta

  Simply said, the Wlan router signal is too weak and this causes disconnection
  I have some advice for you;

  -Update the WLan driver
  -Card Wlan definition of control; You should go to Device Manager-> properties-> Advanced tab WLan card. You will find some options that allows you to change the standard WLan (802.11 A, B, G, etc.) and you can also check the WLan channel and improve the signal
  -Disable the Wlan Card saving

  Good luck

• Windows 7 Dell computer laptop connects to the router, but the internet connection is spotty/slow

  I recently installed a new Comcast wireless gateway, which includes a built-in router.  My Ipod and Ipad work perfectly with this new router connection.  My Dell laptop, however, connects to the router without a problem, but it surfing the internet very slowly and sometimes can't access it at all.  The router connection remains strong during these periods of power failure, however.  I don't get online no problem when I connect directly to the router/modem with an Ethernet cable.  Network troubleshooting does not detect a problem, I have released/updated my IP address, and made sure I had updated drivers.  The issue still [persists.  Any input on what to try next?

  Hello Scot,

  Thanks for posting your question in the Microsoft Community forums.

  The description of the problem, I see that the Internet connection is very slow on the computer.

  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.

  Maybe there's a chance that some network settings, start services application or a third party or a security software restricted it to connect properly and is responsible for the internet connection is slow.

  I suggest you to follow the steps below and see if it helps.

  Method 1

  I suggest you try the procedure described in the following Microsoft Article and check if it helps.

  Internet Explorer is slow? 5 things to try
  http://Windows.Microsoft.com/en-us/Windows/help/Internet-Explorer/slow-five-tips-to-boost-performance

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Method 2

  If the problem persists, I suggest you to follow the steps described in the following Microsoft tutorial and see if it helps.

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Why is my Internet connection so slow?

  http://Windows.Microsoft.com/en-us/Windows/why-Internet-connection-slow#why-Internet-connection-slow=Windows-7

  Method 3

  If after performing more high question method persist, try to perform the clean boot and temporarily disable security software and then check the speed of the Internet.

  Step 1: Perform the clean boot

  Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135/en-us

  Note: See "How to reset the computer to start normally after a boot minimum troubleshooting" to reset the computer to start as usual after a repair.

  Step 2: Temporarily disable security software.

  Disable the antivirus 

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attack.

  Method 4

  Since then, the issue is not resolved by disabling the security software, Windows Firewall could be the next possibility. So, I suggest, temporarily, disable the Windows Firewall and check if the problem persists.

  Refer to the following steps:

  1. Press the Windows key + R, type firewall.cpl , and press ENTER.
  2. Click turn Windows Firewall on or off. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. Click turn off (not recommended) Windows Firewall under each network location that you want to stop trying to protect, and then click OK.

  Caution:

  You should not turn off Windows Firewall unless you have another firewall is enabled. Turning off Windows Firewall may make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers. You must reactivate as soon as you have completed troubleshooting.

  For more details, you can see the article mentioned below.

  Enable or disable Windows Firewall

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• Satellite Pro A200 failing to connect with iphone via wifi hotspot

  My apologies if I get some of the jargon wrong, but I'm pretty useless when you want IT emits.

  I have a Satellite Pro A200 and had problems connecting to various wifi connections.
  The computer could see the wifi connection and connect to it, but I wasn't able to connect to the internet.

  The question of the Office was arranged by our IT support guy (security settings on the new router we too complex for my PC or something like that), but he has not been able to solve the problem of not being able to connect to my iphone to use the 'hotspot' via the wifi function.

  Someone there knows a way to solve this, or is it a simple fact of the laptop is too old and really need to update?

  Thanks for any help that anyone is able to give.

  > Someone know a way to fix this or is it a simple fact of the laptop is too old and really need to update?

  This isn't a question of the age of the laptop
  As far as I know not that support all mobile operators
  You should first ask your mobile operator if you can use the tethering service.

  If this would be supported in my mobile operator, then connect the iphone to the laptop first
  So that you have two options: you can use the BT connection (in this case check if computer laptop also supports BT) or via a USB cable that came with the iPhone.

  (PS: as far I know to attach is supported by iOS3.0 and higher)

  After that the iphone was connected to the laptop, you must activate the tethering on iphone.
  Under settings of-> network, you should see the option internet tethering it must be enabled.
  Now you should be able to see that in the Network & Center sharing control panel.

• Connectivity with Satellite Pro A200

  I recently bought a Satellite Pro A200 (Nov 07).
  The OS is Vista Business and the Atheros AR5007EG WIRELESS network card. Until recently, everything was fine but now I can't access the interent and although the network and the wireless router is detected, I have no wireless connection. If I use a cable via the ethernet port, everything works fine. I also have other computers that are picking up the network

  Can anyone help

  I found a very interesting Blog on the "problems of Vista and wireless", so if you want to solve your problems, simply click on the following link and check the instructions:

  http://www.remkoweijnen.nl/blog/2007/10/16/Toshiba-Satellite-L40/

  Should help, some of these steps, I already did on my Satellite A100 with Vista Home Premium and Atheros AR5005.

  See you soon

• Satellite Pro A200-PSAE4E - WLan speed falls steadily

  Hello

  Anyone know what is causing my laptop to lose wifi on a regular basis? It's a Satellite Pro A200-PSAE4E running on XP. I bought the new laptop in February and it came with Vista loaded but the wifi kept stalling and was Advisor to swap to XP, because it was more stable.

  When wifi is filed, the WiFi connection icon disappears completely from the sys tray as if it never existed even if the wifi witness just under the lower edge remains lit. Research in the network connection in Control Panel of the wifi is not listed.
  I have to shut down the laptop and restart so that I can continue to work online.

  I downloaded the latest driver for the Atheros AR5007EG and I rang Toshiba support.

  Someone at - it ideas - I am disappointed by the performance of the WLan.

  Hello

  Usually this problem could be solved in BIOS and WLan driver update!
  A friend of mine had a similar problem and after that driver WLan will update the WiFi connection is stable.

  Good bye