Again installed KB973688 and KB954430 updates

Similar Questions

• KB973688 and KB954430 updates have tried to install for almost two weeks!

  August 25, 2010. Dell Vostro 230 (bought in April 2010) running Windows 7 Professional. As part of the automatic update, my PC has attempted to install updates 'important' KB973688 and KB954430. Every night on the switch, the system continues to 'install' <1 of="" 2="">and <2 of="" 2="">sometimes for more than an hour (I've not waited to see what happens when it ends). Therefore, responses to "watching paint dry" next morning of clicks of mouse and messages 'not only respondents' on software (including IE). Trying to close takes forever and then goes into the problem installation of updates again! Today, I noticed since the update history page in the Panel that these two updates KB973688 and KB954430 had the 'Fail' status since August 13, 2010. It doesn't seem to be any advice on the Microsoft Web site. What can I do?

  Phil,

  For Microsoft XML Core Services 4.0 Service Pack 2 security updates may repeatedly appear in the update on Microsoft Update or Windows Update list

  See http://support.microsoft.com/default.aspx/kb/941729/ for possible assistance.

  If you cannot rename msxml4.dll in normal Windows mode, boot to Safe Mode, http://support.microsoft.com/kb/315222 and do it from there:

  How to get help and support for this update954430 Microsoft XML Core Services KB

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

• Executing new installation of windows 7 in bootcamp on new macbook pro. Microsoft Updates do not install KB973688 and KB954430

  There were 4 updates running, one was successful, three failed.  Tried to run several times with the same results.

  without success... Update for Microsoft XML Core Services 4.0 Service Pack 2 (KB973688)
  without success... Update of security for Microsoft XML Core Services 4.0 Service Pack (KB954430)
  without success... Microsoft Suite Service Pack 1 (SP1)
  success... Removable tool of Windows malware - January 2010 (KB890830)

  Hello

  You will need to maybe reset the Windows Update components, download the Microsoft fix - it from the link and run the wizard that automatically resets the windows update components, if it does not, I recommend that reset you manually update windows components from the link: http://support.microsoft.com/kb/971058

  This should solve the problem, give it a try and check if you are able to perform windows updates.

  If that does not help and uninstall the updates manually and then download the updates and install then one by one.

  Update for Microsoft XML Core Services 4.0 Service Pack 2 (KB973688)

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=00bcdf28-2299-4150-964d-88a601e25229&displaylang=en

  Update of security for Microsoft XML Core Services 4.0 Service Pack (KB954430)

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=96a4413c-5261-4f69-83d0-932c430abd14&displaylang=en

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problems with updates KB973688 and KB954430 on Vista. Have successfully installed these several times but they both keep still on the list of new updates

  I installed KB973688 and KB954430 which are XML updates a few times.  If I review my editing history, it is said that they have installed successfully, however, these two updates always keep appearing in my list of updates to install.

  See http://support.microsoft.com/kb/976982 or http://support.microsoft.com/kb/976220 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• KB973688 and KB954430 do not install. Windows Update loop on them. they install ever.

  KB973688 and KB954430 do not install.  Windows Update tries to install these two updates, but they never complete the installation.  Tried to install KB954430 manually, but it would not install.   Event Viewer event id 7023 windows module Installer service ended.    Dialog box shows HRESULT:0x800736FD {7B30B69B-036c-b7e0-a06b-d6b9abf34537}.    KB973688 would not install either.  Tried rebooting, shutdown windows update, so I could install by hand.  No updates will be installed.  Help, please.

  This question always took place or simply with KB973688 and KB954430?
  Have you tried manually download and install updates?
  Have you read the known issues with this security update of the section of KB954430 and try the steps recommended?

  Suggest you download and Save KB954430 first . Since you did not specify if the system is 32 or 64 bit.
  If you are not sure which architecture is the system, open System in Control Panel.
  Look next to system type under law to see whose architecture is the system.

  KB954430 for Windows 7
  Windows 7 for 32-bit systems
  Windows 7 for x 64 systems

  Once the download is complete to read this and configure the system to boot .
  Start in what is called a State of cleanliness will ensure that Sophos and printing software (including HP print software) does not interfere with the installation of the update.
  Once you have started own the system, right-click the update registered and choose 'Run as administrator' .
  Accept guests UAC to allow the update to install.
  Reboot the system after installation.

  Is he being always reaffirmed or just KB973688 be already now?
  If KB973688 is the only be reaffirmed, install now while the system is still in the clean boot State.
  That bring them both installed?

  Cancel the clean boot procedure as set out in the KB article , they have or they do not have and please post back with your results.
  MowGreen Services consumer safety update

• KB973688 and KB954430 do not install it.

  KB973688 and KB954430 do not install it.  They appear to install, but after turning off and restart they keep trying to install again. I use XP SP3. (This is my 1st time to enter in ANY forum) Help, please.

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows 7 unrecoverable system after installation of ArcGIS - KB973688 and KB954430 errors

  Hello!

  I am running Windows 7 ultimate x 32 and windows update will not install two updates after installing ArcGIS 9.2:
  -Update for MSXML Core services 4.0 Service Pack 2 (KB973688)
  -Update for MSXML Core services 4.0 Service Pack 2 (KB954430)

  I tried several times with retry and installation manual several times with and without boot and startup (disabled UAC; admin install...). No question.

  I get to kb973688 errors:
  -Error code 643 (try it with windows update)
  -HRESULT: 0x800736FD (installation manual try, it stops at 2/3 progress bar, saying "Publishing product information").

  WindowsUpdate.log said several times:
  -WARNING: Failed to evaluate installed rule, updateID is {...}
  -WARNING: Failed to evaluate installed rule, updateID is {...}

  Between the parentheses, there are different channels such as D8BD0CF7-C4A8-48A8-9B1F-E791CE07F934.

  I tried to uninstall the updates with Add/Remove windows components, but no components are presented.

  CrapCleaner (ccleaner) tool shows, however, that there is a system restore point at a time where KB973688 was supposed to be installed.

  Finally, I tried the system restore to a couple of restore points, but restoration said that he cannot restore (!).

  So my last try: clean install from Windows 7, Windows XP Mode, installed ArcGIS 9.2 v. in Win XP Mode and I was back again smooth and clean.

  My question is: how is it possible that any application can corrupt and Win 7 so much! We hope enough that I got the chance to start, but if not, how can I recover my system and I want to say my system restore points and my options to add or remove system components?

  Have a happy new year!

  I found the following solution on the ESRI website that has worked for me.  It is a minor registry fix which gives more storage space for the Windows registry:

  http://forums.ESRI.com/thread.asp?c=93&f=1148&t=287391#902480
  Update MS in question above installed as soon as this fix has been applied.
  Good luck!

• Problem with update service pack 2 KB973688 and KB954430

  Every time I download these two updates, 5 minutes later, after restart... I get a message that these same two updates are prepared to intall. I have done this process about 10 times. It happened just before I updated my antivirus software... anyone who wants to help a beginner?

  THX

  My antivirus expired 2 days after installing the current upgrade...

  I see.

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  Tip: After getting the computer fully patched, download/install KB971029 manually: http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application (which will require WinXP SP3 must be installed).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Risks & benefits of P2P file sharing
  http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
  http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspx

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I'm unable to install KB2656368 and KB268627 updates.

  Microsoft Fixit does not work. I have System Mechanic installed on my laptop and have received the instructions from them on how to solve the problem with windows install, but this did not work either, nor a Repair.NET Framework 4 Client Profile.  I use Window Vista Home Premium 32-bit with Service Pack 2 installed.  Please can you help.

  System Mechanic is your troublemaker & you have lots of company! -Online

  TIP: See post my colleague Maurice's RESPONSE in this thread: http://answers.microsoft.com/thread/d6fedf33-dc1b-451f-9aab-97429f916180

  If still no joy, contact System Mechanic (iolo.com) supported again for assistance-, they are well aware of the problem posed their candidacy.

  ~~~~~~~~~~~~~~~

  TIP: If you think that more never your registry database needs to be cleaned, repaired, boosted, to the point, healed, twisted, fixed, magnified, "swept" or optimized (and even more to convince that it is not), read http://aumha.net/viewtopic.php?t=28099 and draw your own conclusions. See also http://blogs.technet.com/markrussinovich/archive/2005/10/02/registry-junk-a-windows-fact-of-life.aspx

• Just installed LR6 and made "Update" LR won't recognize my Nikon D7200 when I try to "Tethered Capture"

  He knows that recognizes the camera otherwise when I go to 'Import of Photos' cannot understand this.

  What version of LR "update you"?   D7200 needs Lr v6.4 (or 6.5 CC2015.5)

  Have you read Adobe help page - trouble shooting tethered in Lightroom

• Cannot install iTunes and a few updates on Windows Vista

  Original title: the purchase, I was unable to install itunes and some updates on my laptop.

  I could not install certain programs esp. itunes says error message my windows installer is running in SafeMode... or does not work properly (I'm not running in safe mode).  and some windows more major updates such as the profile of microsoft.net framework 4 client for windows vista x 64 bit systems and smaller as live office adds to 1.5 install and let me with 643 and error code 6 B 7.

  I was able to install some things that say 'administrator' wil do not allow (whereas I am the administrator, and it's the only profile on my computer) by 'save' and downloaded the installation from the file. but it did not work for the itunes.

  I had my laptop to two different computer repair centers and could help.

  Try to install and run Windows Installer Cleanup Utility: http://www.softpedia.com/get/Security/Secure-cleaning/Windows-Installer-CleanUp-Utility.shtml and see if that helps.

  Here is an article on how to solve the problems of Vista update: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-problems-with-installing-updates.

  When you try to install the program, right click on the system icon and click on run as administrator and see if that makes a difference (sometimes it does).

  For problems of iTunes, visit the iTunes support group at the: http://www.apple.com/support/itunes/ where they have contact information and access to forums like this one for iTunes.  They will help.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows update KB979909, KB982168 and KB974417 install over and over again

  Windows update KB979909, KB982168 and KB974417 install over and over again. This update I had during the last few weeks over and over again. Installation and restart and the update comes again. How can I stop this? Looks like the only way to stop the automatic update for windows :-(

  permini,

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  KB982168

  KB982168 is optional, not updated safety information. Feel free to hide it

  1. stop the automatic updates service:

  Start > run > services.msc (enter) > [OK]

  Double-click Automatic Updates > click Stop (stop the service will take a moment)

  2 remove the contents of the download folder:

  Start > run > %windir%\SoftwareDistribution (enter) > [OK]

  Open the download folder and delete its contents

  Close the window.

  3. go to the Windows Update Web site. Select CUSTOM and allow the analysis to be performed. Uncheck the box/deselectKB982168 and hide ("don't show me this update").

  4. start the automatic updates service:

  Start > run > services.msc (enter) > [OK]

  Double-click Automatic Updates > click on Start (start the service will take a moment)

  --

  reset

• Windows Update keeps trying to install KB2656369 and KB2686828 over and over again

  My setting has been changed, the windows update has been downloaded and installed automatically. Now I have to turn off the computer for installation

  I continue to install both patches repeaedly: a security update for Microsoft Net Framework 2.0 on Windows Server 2003 and Windows X x 86 (KB2656369) and

  Updated security for Microsoft Net Framework 2.0 on Windows Server 2003 and Windows X 86 x (KB2686828))

  My setting has been changed, the windows update has been downloaded and installed automatically...

  If you mean the new V7.6.7600.256 WUA installed himself past week... you can change your settings to again to your panel of control-online Start > Control Panel > automatic updates.

  Regarding the .NET - repeat-... updates just hide them (don't show this update again) in WU, delete them (if they are already listed as installed), and then download and install manually.

  Or if not try > http://support.microsoft.com/kb/910339

  Confidence in assistance.

• Installation says 'successful', however, same updates needs to install over and over again. (KB2518864, KB2633880 & KB2572073)

  Hi all

  original title: install said 'successful', however, same updates needs to install over and over again.
   
  Hope everyone is doing well.  This just happened this morning and try to find solutions but seems I can't find the right one.
  So I got the "shield of Microsoft", letting me know that I have some new updates available.
  1. Update for .NET Framework 2.0 SP2 and 3.5 SP1 on Windows Server 2003 and Windows XP x 86 (KB2518864)
  2. Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2633880)
  3 security update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2572073)
  I installed the following updates and he "succeeded".  A few minutes later, the shield pops up again asking me to install the SAME updates.  I did it again and once more "managed".  A few minutes later, the shield popped up again (same updates).  This time, I installed it, my computer re-setting, however, the same updates need to be installed again.  I'm ignoring the shield right now.
  Thoughts on that?  This means - it is NOT installed correctly?  How can I fix it?
  I have a netbook, Windows XP laptop.
  Thank you.

  Hello

  It seems to be a mess of some sort on the server. Until that which is high to the square correctly, follow these steps.

  We will empty the download folder.

  Start > typeRegeditdans cmd & press enter

  type in
  net stop wuauserv

  OUTPUT

  NB. which temporarily stops the automatic windows update service. Your next restart of Windows, it will be again.

  Go to Windows Explorer.
  Look on your system (usually C) drive and see the name of the Windows folder. Like Windows or WINNT.
  Edit following as appropriate.
  If your Windows folder is C:\Windows. Look at this file
  C:\Windows\SoftwareDistribution\download

  If you find files in there, remove them. This file is where the Windows Update files are stored downloads.

• I just formatted my laptop and every time I try to intall service pack 1 for windows vista as it gets installed but when I turn the LAPTOP works again it ask me to update?

  I just formatted my laptop and every time I try to intall service pack 1 for windows vista as it gets installed but when I turn the LAPTOP works again it ask me to update? What should I do

  Hello

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  It will also tell you here what Service Packs, if any, are already installed.

  Then, choose the download of 'bit' OK to use to install Service Packs, first of all the installation of SP1.

  Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

  Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  And if you have any problems:

  There is a Forum that Microsoft has put in place for problems with Vista Service Packs. If repost you the Forum they will definitely try to help you here...

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  See you soon.