age of empires II gold edition screen goes black and nothing happens
After I installed my Age of Empire II gold Edition I clicked to play the game, the screen turns black like its going to work then it fails just and do not work alsoi have window 7 Home Premium 64-bit. Can someone help.
Duplicate the content of the Post-
AOE age of Kings the entire screen turns and shows the signs of AOE, but then she's just completely fails
Hello, I had a problem and I know I'm lightyears end 2 post but AoE is like my favorite series and I finally got my old fav of kings gold edition version, but it does not work on my windows 7 home edition. Of course, it installs fine. But when I want to play 2 whole screen turns and shows the AOE sign, but then it just completely fails after that so if someone can help me u can give me advice on how to fix 2
I downloaded the demo version of AoE II and it works without problems with the following parameters: 'compatibility mode', the value Windows 98 / ME (XP will not work), "run as administrator" and (perhaps not necessary) adjust your firewall settings to allow this program run on private networks. As always, do not install older programs in folders protected system (C:\Program Files or C:\Program Files (x 86)), choose a different folder target installation instead.
Tags: Windows
Similar Questions
-
I get to the black screen with the Windows XP logo and the bar of the State, and instead of my forthcoming accounts page, the screen goes black and nothing else happens. I tried the power off to reset and restart, and I can't perform a recovery of the system with the CD.
Hi cgrosenick,
-What software changes you did on the computer before the show?
Follow these steps:
Method 1:
Start your computer in last known good configuration mode.
For instructions, see How to start your computer by using the last good Configuration in Windows XP functionality
Method 2:
Follow the steps in this article:
Computer stops responding with a black screen when you start Windows XP
-
Age of Empires 2 Gold edition crashes
Original title: program compatibility Application Applications App Apps games Crash game compatibility crashes Hang hangs program inherited from the game, hangs and crashes
I bought an Age of Empires 2 Gold edition from my local game store. I installed it and I tried all the possibilities to ensure the compatibility and nothing happens. I load the 640 X 480 and then the display goes back to my office in the same resolution, then it goes black screen and then back to normal? Am I missing some drivers? I tried it and have tried many different options, but nothing seems to work? Help, please
Dell Inspiron 570
I have Window 7 64-bit.
ATI Radeon HD 4200
And I have DirectX 11
HelloMethod 1: You can check the link below:Method 2: you can also try installing the game in Windows XP Mode on Windows 7.
http://Windows.Microsoft.com/en-us/Windows7/install-and-use-Windows-XP-mode-in-Windows-7
(Windows XP mode runs on Windows 7 Professional, Ultimate and Enterprise editions only)I hope this helps!
-
age of empires II gold edition does not start message is windows has encountered a problem
Computer crash to reinstall factory disc. Have reinstalled Age of Empires II gold Edition, but it does not start, the message of windows is windows has a problem and we will contact you as soon as a solution is available.
Tried it does not work, the installation was not the problem. Something happened and it lacked the EULA and my security system blocked the program game to start.
All fixed up now I thank you for your reply and your help.
-
Isn't CD player to play Age of Empires 3 complete Collection and Age of Empires 2 Gold Edition
Original title: age of empires 3 complete edition
I recently bought a laptop Windows 8, which is not equipped with a cd player. I have Age of Empires 3 complete Collection and Age of Empires 2 Gold Edition on CD. is there a way I can download games in my new laptop and use my product key to play?
Hi Omarreyes,You can copy the contents of the game on the game CD on a removable media such as flash media, and then try to install the game.You can also use another external CD/DVD drive to install and play the game from the CD.If the problem persists, I suggest you to contact direct support for Windows games in the context of this question. You can check the link:
http://www.Microsoft.com/games/en-GB/support/pages/default.aspxLet us know if you have more queries on Windows. -
Portege M400 is frozen, screen goes black and the fan speed increases when moved
Can someone help me please?
I recently received the Portege M400 from a friend 4 days ago and reformatted for Windows XP Tablet Edition.
Everything's fine until I wanted to move the laptop to my coffee table, but as soon as I move the laptop it freezes, the screen goes black and the fan speed increases dramatically.
So far I have had no success in the resolution of this problem and I really appreciated, is that someone could help me!Have you installed the OS using a Toshiba recovery media or you have installed the version of the OS?
-
Whenever I try to play True Crime New york city for windows XP it is closes its doors after the theatrics start and gives me an error saying the file d3d9.dll has stopped working or the screen goes black and then then I know you left the game back and I'm at my desk again.
Hello Respect137, welcome.
It would appear that running DirectX files installed on your system were corrupt. This gives a test:2 follow the instructions which is there to install the package to update DirectX3. Once installed, restart your computer and try to run the gameLet us know if this helps,Thank you!Ryan Thieman
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
have a screen saver password photos. As he passes, the screen goes black and stays black. What can I do?
have a screen saver password photos. As he passes, the screen goes black and stays black. What can I do?
===============================
I don't know what is causing this problem but would be
suspicious, it is related to a corrupted or obsolete
video driver.Might be interesting to try to reduce your graphics
Hardware acceleration instructions
in the following article.How to put in back of graphics hardware acceleration
http://www.pptfaq.com/FAQ00129_How_to_set_graphics_hardware_acceleration_back.htm
(scroll down to: "If you are using Windows 2000 or XP")If they improve the question, you should look for the
site Web of MFG. your video card
a updated driver Win XP compatible video. Or...
If your computer is a laptop... Search support
site of the manufacturer of your computer.If you do not know the make and model of your
Video adapter, see the documentation that
supplied with the computer.Also you can find info on your video by driver
go to Device Manager: you can launch
By clicking Device Manager on... Start/run and
type or copy / paste:
devmgmt.msc
And then press ENTER.Expand "Graphics cards" and right click
the name of your graphics... then
choose... Properties / tab pilot... FYI.You should find the make and model of your
adapter display as well as the version of the driver.If the driver on the Web site is no longer
current than you run...
Download and install it. In addition, installation
instructions that should be followed closely
should be available on the support site.Once installed the new video driver... you
can restore your full acceleration.Good luck...
-
When using gpu high performance my laptop screen goes black and white
HP Touchsmart TM2-1010ea
Windows 7 64 bit
recently updated to AVG, nothing of other news.
When I use the high-performance GPU the laptop screen going black and white, still functional. When you use two screens, the second screen is in color, while the laptop is in black and white. using the screen of the laptop power saving GPU is again in color.
Hello mcbethtings:
Welcome to Hp forum. Your question is not in the list. http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_rule=56801&tmp_task=solveCategory&CC=UK&DLC=en&lang=en&LC=en&product=4100044 So, in this case I sujest a restore back to remove what are the mistakes caused by a bad AVG update. GoTo all programs search and type in Recovery Manager click that above and open it. Click Yes (white box) so it apears. Select Microsoft System Restore Click next to three windows now you will see a list of dates, select a date prior to the installation of the update, then click. Let the computer do its restoration. Once done see if your problem is solved, if so try the update again, make you that the update is for 64-bit Windows 7 computers before you download it again. If that happens again once you know what AVG is not compatible for your computer.
Probably you have only received part of the witch update caused this problem due to the disruption of atmospheres. Sometimes this happens. Put day of my HP only made once. I just did a restore back and downloaded the update again and the second time through work. Please click on Bravo if this solves your problem. Thank you frrw.
-
original title: HELP ME PLEASE!
(I am running windows xp) I need help! I tried installin linux ubuntu for netbook 10 on my msi u100, but everything was wrong when my little brother from my FlashDrive from the port, it has been installin linux from. so now when I turn on my computer it will not load windows, it will just have the msi logo and then the screen goes black and it does not load windows xp.
Netbooks and also most computers these days, do not come with an installation CD. Instead, it has a recovery partition. Assuming that you have not deleted the recovery partition,
Take a look at this:
http://randompastime.blogspot.com/2010/02/restoring-MSI-wind-U100-NetBook-to.html
Hope this helps
Post back if necessary
__________________________________________________________
If this post can help solve your problem, please click the 'bookmark' or 'Yes' to this message button. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
screen goes black and I hear 3 beeps slow cpu.
A few minutes after turning on the power button on the computer, my screen goes black and I hear 3 beeps slow cpu. It makes me have to hold in the power button to turn off the computer and restart. This happens as regularly after I've been on the computer for awhile. What is causing the black screen and beeps?
Hello
You normally get beeps and it does not start.
You will need to go to your computer manufacturer's website and find out what BIOS you have in your computer model.
Then check in these links 'beep' error codes know what hardware has problems.
http://www.pchell.com/hardware/beepcodes.shtml
http://www.computerhope.com/beep.htm
See you soon.
-
original title: Auto Adjust
Hello.
Whenever we start to use our computer, the screen goes black and the message 'Auto adjust is in Prgress'. Then, all of our screen is small and all the icons and pages are smaller than before.
I tried restoring the system that works and that gets our screen back to normal but every day that this Auto setting is coming and we can't seem to stop it.
Any help would be appreciated... Thank you
Try this:
Go to the Web site of the manufacturer of your laptop computer-graphics/computer card > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.
Then:
http://Windows.Microsoft.com/en-AU/Windows-Vista/change-screen-resolution
Change the screen resolution
Screen resolution refers to the clarity of the text and images on your screen. At higher resolutions, items appear sharper. They appear also smaller, so more items adapted to the screen. At lower resolutions, fewer items adapted to the screen, but they are larger and easier to see. At very low resolutions, however, images may have serrated edges.
See you soon.
Mick Murphy - Microsoft partner
-
My screen goes black and the start menu does not load after start up logo and the only thing on the screen I see is my mouse pointer
Hello
You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
on devices and UNINSTALL - REBOOT.Another method to try to get to the desktop (try in normal Windows Mode without failure)
CTRL + ALT + DELETE and on the tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - then
on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
by tapping F8 as you start several times.First check this thread in case it is simple and if not to come back to this thread.
http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a
Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
That there is no information on a black screen as it is on a blue screen just adds to the
Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
Google to see the proposed repairs, whom some have worked however these cover a wide
field efforts.Here's a video of one of them.
http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1
Here's another fix
http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.phpYou have a Vista disk? You can try restoring the system to it. If you do not have your system disks
manufacturer will sell them at low prices. Or try in safe mode if you can get there.How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.htmlYou can create a recovery disc or use someone even version (to do the system restore there only to)
being bootable).How to create a Vista recovery disk
http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html------------------------------------------------
These require the correct Vista discs since you can not start safe mode.
Try the Startup Repair tool-
This tells you how to access the System Recovery Options and/or with a Vista disk
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxTry recovery options Startup Repair
How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.html-----------------------------------------------
Here are a few Google searches where many have found different solutions:
Vista black screen - check that a 1st
http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10Vista black screen Solution
http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQIVista black screen Fix
http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI-----------------------------------------------
If necessary and you can access all ordinary Windows.
You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.You can use another DVD that are not protected but you will need to copy you have the product key.
On-site upgrade
http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htmIf nothing works, you can make a repair facility that must save the data but you will need to
Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
need to know your product Code.This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxHow to perform a repair for Vista Installation
http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html---------------------------------------------------------------------------
Another method that works sometimes: at the command prompt, type of Vista startup disk:
(type in a single line or copy / paste a line at a time and then press enter - type no parenthesis)
or "BOLD")c:
cd\
CD c:\Windows\System32\winevt (there is a space between cd and C :)
Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)RESTART Windows
I hope this helps.
I hope this helps.
Rob - bicycle - Mark Twain said it is good. -
When I connect the HDMI cable to my laptop, the screen goes black and I can't lift the office unless I get out the HDMI cable. It happened all of a sudden I used he linked TV to catch-up on TV episodes until last night when it happened out of the blue!
Can someone please help with this.Contact the manufacturer of your laptop. Also - that there might be a key combination for your laptop that changes the screen from the main output is - look at your documentation or on your keyboard for such a combination of keys (what kind of computer is? Make & model...)
-
No changes but my screen goes black and computer stops on its own
This has just begun. Screen goes black and the computer shuts down. Is also off sometimes when I try to wake him up.
Hello Mary LouJoseph,.
Click the link for the who might help with your problem of black screen.
This is whyis my screen black when I start Windows 7?Let us know if that helps.
Marilyn
Maybe you are looking for
-
I'm having a problem with my Pro MacBrook retina (end of 2013). Since the upgrade is supposed to 10.11.4, I eperienced several system freezes; all that required a hard reboot. The machine is Core i7 to 2.3 gHz, 16 GB 1600 mHz DDR3 ram, 512 GB ssd.
-
Satellite P755-11 q - bad WiFi reception
Hello. I have a new satellite p755, with W7 64-bit.I admit for almost a month now, after 4 years of use of a satellite A500 18 Q. my old laptop still works and here begins the problem. We have a connaction wireless at home. my old computer so the com
-
Why LabVIEW 2012 does not support USB-6009?
Hi all I recently installed LabVIEW 2012 and DAQmx 9.6 (and also tried with latest version) in my PC with Windows 7. I have the version of Explorer 5.4 measure and automation. I'm working with hardware DAQ USB 6009. Everything seems compatible, but w
-
E1200 low speed wired &; wireless through L2TP
I have the L2TP connection. Without the router, just cable, I have 35 MB/s download and 70 Mbit/s upload. Through the E1200 wired & wireless, I get a huge download speed 5-14 Mbps. I have the latest firmware and I reset it after the update. I read a
-
Problems with the album settings.
I'm having a problem with the settings of my album. When I "crop" an image to select a background image, I had accidentally selected always use and now I can't change it. Is there a way of?