Aggregation of links for Equallogic

Similar Questions

• MPIO and aggregation of links

  Hi all

  I was wondering if someone could explain the differences between the two briefy, I know that MPIO resides on the layer IP and LAG is at the level of the Mac layer. But I'll put up our Equalogic PS4000XV iSCSI SAN with two hosts ESXi 4 U1. I use VMWares Round Robin MPIO, with the strategy of several VMKernel ports dedicated to multiple NETWORK cards.

  My main question is that I still have to do the aggregation of links? Y at - it an advantage? And if it is how can I go to do it because I have 6 100 ports VLAN dedicated to iSCSI, 4 ports traffic go to the SAN and 2 ports light up to two network cards on the ESX host, when I LAG all the SAN becomes inaccessible. Any thoughts?

  To add, VLAN is not recommended for iSCSI traffic, it is better to use a dedicated switch (preferably a pair of switches).  When a pair is used, there should be a group of ports in the LAG between them (min of 2 Gbps) or stacked.  The configuration of the switch must also be very specific with the PS4000 - flow control enabled on all ports and port deep buffers.

  Download SanHQ from Equallogic.com if you do not already done, this will give an idea of prices of retransmission for your tests under load (with IOMeter for example) - and loads of other cool stuff.  Make sure you have the latest firmware on the PS, including the L1 patch and be aware of vmware PR484220 to do with the MPIO.

  Please give points for any helpful answer.

• Does Windows natively support the aggregation of links?

  There are some descriptions on the aggregation of links in Wikipedia.

  http://en.Wikipedia.org/wiki/Link_aggregation

  "Note that Microsoft Windows does support not natively the aggregation of links (at least until Windows Server 2008)."

  I was wondering if this description is accurate? And what about the new windows operating system, such as Windows Server 2012 edition?

  Windows xp, Windows 7 and Windows 8 natively supports the aggregation of links? If the answer if not, anyone know why? I know, Linux and other operating systems support the aggregation of links.

  Hi, Peacegump,

  For NIC teaming or link aggregation support, you will need to contact your provider network adapter or an OEM (for example, Dell offers a driver of consolidation).  They provide you with a driver that allows the grouping of NETWORK adapters, because Windows does not offer this feature in the core of the operating system.

  http://social.technet.Microsoft.com/forums/en-us/winserverPN/thread/f200b747-d9fb-4632-b6a4-aaf89c3dcc9b

  Grouping network adapter and clustered servers

  http://support.Microsoft.com/kb/254101

  How to use matching with Advanced Networking Services (YEARS)?

  http://www.Intel.com/support/network/sb/CS-009747.htm

  Windows 7 - aggregation of links to double bandwidth: 2 p., 2 network cards of each

  http://www.SevenForums.com/network-sharing/124720-link-aggregation-bandwidth-doubling-2pcs-2-NICs-each.html

  If you need more information, transfer your question on the Forum on TechNet.

  http://social.technet.Microsoft.com/forums/en-us/winserverPN/threads

• Aggregation of links between poerconnect 5324 and poweredge with broadcom adapter

  I am looking for information on how to build an aggregation of links between my powerconnect and three cards broadcom on my server. I want to create a bandwidth of 3 GB.

  I created a team with suite ABEC 3.

  My network have 2 VLANS.

  At this stage, I could ping my server network, and I can ping the server in my network.

  When I defined the three ports of the switch (where three cards are connect) as LASG and I defined in belonging to a VLAN these three ports whose status is F, I ping the server from the network, but I can't ping the server network.

  Could someone tell me how I could build this bandwidth betwween my powerconnect, and poweredge?

  Thanks a lot for your help.

  
  

• LACP SG200 - 08 double speed ethernet when two aggregation of links Mac it

  Hi guys, I use a mac mini and imac with 2 Thunderbolt ethernet adapter to make the aggregation of links on a SG200-08.

  To copy the files of drivers from the mac mini raid0 stroke, the speed of the network can reach 225 MB/S, but the actual speed of the disk drive is only 107 MB/S

  I mean that the two ports in each mac carry only the same data over time. Can he do a given separate two and carry on two ports?

  I can find use VLAN or else combine two IPs for one?

  Don't know how yo SG200-08 GUI web definition (this is my first time using the smart switch)

  Hi Yang, your computer supports a load such as link aggregation/LACP 802.3ad balance method? You can effectively double the data rates without a nic-team aggregation technology or link any.

  -Tom
  Please mark replied messages useful

• aggregation of links in the ucs servers

  Hello. Is it possible to aggregate links in the UCS Manager to get the speed of single link over 10 Gbit/s on each server? How can I do? I can build link interface on linux, which is installed on the server. But what do I do in the UCS Manager?

  Correct, the aggregation of links (port-channel) can be configured between the FI and the IOM if you have second generation FI/IOM and configure the port-channel to the title of the material > material > policies > policies > policy of chassis discovery.

  So pretty much, make you the aggregation of links at the OS level and then proceed to UCS as described above but it will provide a port channel for the entire path (IOM at the END)

  HTH,

  -Kenny

• Cannot reset Apple ID same security issues with the link for valid reset. Help?

  So, I'm trying to reset my security questions, because I forgot the answers. I followed all the procedures to do, but it won't work.

  I clicked on the link for reset enter my Apple ID account page, then get the message: 'Reset Instructions sent. An email with the instructions was sent to @emailaddress. Follow the instructions in the email to reset your security questions. » - OK

  I opened the email: "Dear ME, recently made you a request to reset your Apple ID security questions and answers. To complete the process, click on the link below. Reset now >"I click on the link, it opens a new window with a login screen. - OK

  On the login screen, I entered my account information, email, and password in the fields and click the button to continue. Instead of connect, I get the message pop-under from the password field as follows: - FAIL

  I try again and again, but it never works. Whenever I get my password and trying to proceed, the loading spinner runs for a bit, then I get this message "to reset your security questions, sign in to your account and start again." I have never spent this page and in a region where I am able to actually reset my security questions. I tried with all browsers, Firefox, Chrome, Safari... nothing works. Now, I have tried 3 times reset by e-mail. It will not work. What is going on? Is the site broken?

  To make things worse, I don't have an option to call for framing according to the Apple website. The only option I get is to contact my operator. What the * is my carrier will repair my Apple ID? It's very frustrating say the least. Someone please help!

  You cannot reset the Security Questions If you forgot the. You can only reset them if you know them (which means that you also know your password).

  You can contact the Apple Support here to have a reset link you sent once they verify your identity:

  ACCOUNT SECURITY SUPPORT

  Good luck

  GB

• I'm looking for something, or even click on a link "for you", that he - and nothing else than the spinning wheel.

  I'm looking for something, or even click on a link "for you", that he - and nothing else than the spinning wheel.

  It is easier to go to YouTube, which I prefer not to do.

  < published by host >

  It's real comments to your message:

  You talk to other users here, not to Apple directly.

  Click below and select the product (s) on which you have any concerns or suggestions:

  http://www.Apple.com/feedback/

  Then select your product

  When you contact Apple to give them feedback, note the statement at the top of this page:

  'Use the form below to send us your comments. We read all comments

  carefully, but please note that we cannot respond to comments you

  submit. »

• Change security questions is impossible - shows no link for reset.

  IF you have forgotten the answers to your security questions, Apple Support explains that by clicking on the link "reset my security questions" is where you can begin to solve this problem, but... This reset link does not show, which makes available completely useless advice and reset the impossible security questions.

  What should do? I need urgently correct my personal information.

  Thank you

  F.J.

  You must ask security team account Apple to reset your security questions. To contact them, click here and choose a method; If this page does not list one for your country or if you are unable to call, complete and submit this form.

  The link for reset that for people who have an alternate email address.

  
  (141781)

• Please give me the download link for md313 training camp.

  Please give me the download link for md313 training camp

  
  

  Unfortunately, I can not find this file.

  Please help me.

  Hello alireza2003,

  Thank you for using communities of Apple Support.

  I don't know what exactly you are trying to accomplish, but if you download Bootcamp for Windows 8.1 support software, and then follow the steps below.

  Download the software supported for Windows 8.1 or later

  1. Make sure that your Mac is connected to the Internet.
  2. Open Boot Camp Assistant, located in the Utilities folder of the Applications folder.
  3. Uncheck all options in the Boot Camp Assistant window, except the ability to download the latest version of Windows software Apple support. Then click on continue.
     If you don't see this option, choose Action > download the Windows Support software in the menu bar.
  4. Make sure that your USB flash drive is displayed as the destination drive. Click on continue, and then enter an administrator name and password, if prompted. Boot Camp Assistant then downloads Windows supported software for this drive:
     

  Problems?

  • If the wizard does not see your USB flash drive, click Go Back and make sure that the drive is connected directly to the USB port on your Mac, not to a screen, keyboard or hub. Disconnect and reconnect the drive, then click on continue.
  • If the wizard says that your USB key cannot be used, ensure that it is properly formatted.
  • If the wizard says that it cannot download the software due to a network problem, make sure that your Mac is connected to the Internet.
  • If the wizard says that the Windows support software could not be saved on the selected disk, make sure that your USB has a capacity of storage to the last 8 GB.

  If you do not see some Mac functionality if you are using Windows on your Mac

  Take care.

• There is no link for reset issues

  IT says that I need to say my question answers to move forward even if I don't know them in the first place

  If you do not have the link for the reset, contact Apple support. Contact Apple for assistance with the security of the Apple ID - Apple Support accounts

  -AJ

• I need a link for windows 7 starter 32 bit X 16-96078

  I need a link for windows 7 starter 32 bit X 16-96078. If possible!

  Hello

  HP do not offer a download for the recovery media option, but there are two options available.

  1. you can order a set of replacement of the recovery media using the link below - it will reinstall the operating system, all the drivers, and almost all of the original software (the exception being often tests of MS Office).  They will also recreate all of the original scores, including the recovery Partition.

  Order HP recovery disks.

  2 you can use the following method to create your own Windows 7 Starter 32-bit installation media.

  Before you try the following, make sure that you can still read all the key character product activation 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create Windows 7 installation yourself using another PC. However, it not there no download directly available for Windows 7 Starter, so you'll need to download another version (one will do, but the link below is for Windows 7 Home Premium 32 bit - the source of the image is Digital River).

  Windows 7 Home Premium 32 bit SP1.

  For the key on your label of COA to work, you must now use the method described in the following link to convert this ISO to an all-version Installer - the section that require you to edit the ISO is Step 1 DVD universal (although you will create an installer from usb, the method to change the ISO is the same).

  http://www.SevenForums.com/tutorials/85813-Windows-7-universal-installation-disc-create.html

  Once done, use an application like Rufus to create a bootable Windows 7 usb flash drive.

  Use the Flash drive to perform the installation, enter the activation key of Windows on the label of the COA in the request and one time Setup is complete, use the 'method of phone", described in detail in the link below to activate the operating system - this method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  You may need for your laptop, software and additional pilots are in entering either the complete model number or Nr here.

  Kind regards

  DP - K

• Download link for Power2Go on windows 7 64 bit

  Hello

  I recently updated my 2TQ Lenovo G550 of Window Vista to Window 7 64-bit OS. I try to look for the Lenovo site for Power2Go software link, can I download it from the official website of Cyberlink. Now it is said that it is only a version 30 day track.

  Can someone give me the download link for Power2Go... ?

  Thanks in advance.

  Patricia

  http://consumersupport.Lenovo.com/ca/en/DriversDownloads/drivers_show_2096.html

• WiFi link for printer EPSON-750 does not work

  WiFi link for printer EPSON-750 does not work. In spite of reset the WiFi on the printer and reset the EPSON 750 as default printer on the IMac, the connection between the iMac and the printer does not work

  Have you also tried to restart the router?

• Pavilion g6: no update of the download links for Windows 7 Home premium 64-bit?

  I have a pavilion g6 and my hard drive has been corrupted. I had windows 7 Home premium 64-bit preinstalled, but could not find a new download links for the ISO, as they have all been removed. Anyone know where I can download the ISO?

  I have not personally used these links, but the answers he is other people are positive:

  http://getintopc.com/softwares/operating-systems/page/8/