AHCI

Similar Questions

• New SSD AHCI identified as carriers of ROM Mode

  I installed a new 512 GB SSD AHCI in a DT120 adapter and plugged into a PCI bus on my Mac Pro 2012.

  Disk utility sees the SSD as a media of ROM MODE and not allow it to format.

  Any ideas? I tried two different adapters without success.

  I forgot to clarify that the above SSD is of type m2.

  The latest version of Trim Enabler also sees the SSD as a media of ROM MODE.

• SM951 blade ssd for Mac Pro 5.1 - AHCI or NVME

  Hello

  I recently updated my old 3.1 latest 5.1. I also bought a m2 lycom til pciE card and a Samsung SM951 ssd. HOWEVER, I am not able to see the ssd in the finder or disk utility. I bought the NVME version. I think maybe I should have ordered the AHCI version.

  This will be my main drive. It must be initiated.

  Thanks in advance.

  RIL of this model doesn't support NVME, you will need to order a different goal: to solve this problem.

• HP ENVY 14 (14-2020NR): my computer load AHCI or SATA3 upgrade to an SSD

  I have 16 GB of RAM (max for my computer) and I have the I5 processor.  I want to upgrade to an SSD.  I don't know what SSD for upgrade to or if my computer is equipped to handle the upgrade.  I was told to support AHCI or SATA3 upgrade to an SSD... I do not have a good understanding of what those who are if I really need them to upgrade or if its worth the upgrade.  Thanks in advance for any help.

  -Nile-

  Hello

  Your device supports the SSD even, it only supports SATA 2 SATA 3 is backward compatible with SATA 2.

  Kind regards.

• Cannot set in AHCI mode for disc SSD NB300

  Hello

  I have a Toshiba NB300 netbook, running Windows 8 Pro 32 bit, very happy with it!
  I have a Corsair 3 112 GB Force SSD drive is installed, and everything seems to work fine!

  Read on the SSDS, I see that a better performance for executing the SSD in AHCI mode.
  So I went to menu configuration of startup and changed compatibility in AHCI mode.
  I actually tried a few times, always with the same result, failure!

  When the system is trying to start I get a message saying that there was a problem and that
  the system is trying to gather information.

  The only solution is to go back in the program installation and handed to the compatibility mode.

  The BIOS is up to date, and I just don't see any way to solve the problem.
  I really want to get best performance with this net book as possible.
  I have a screenshot of the details of Speccy SSD drive, but I don't see a way of fixing?

  If anyone can advise me on how to get mounted AHCI mode and go that I would be really grateful!

  Thank you

  Chris

  Unfortunately on this forum we don t have reports on the use of the DSS on NBs I have NB520 and I would use the SSD for, but so far I didn't find the right.

  As far as I know by default BIOS is set to AHCI mode. What operating system you have installed? The original that you got with your laptop or your own version? Have you installed the s Intel Storage Manager of the Toshiba download page?

• Satellite P300-20-player not recognized in AHCI mode

  When I set the SATA to AHCI - Mode controller Mode. Doesn´t BIOS find the DVD more. I have also flashed the new Bios, but failure still exist.

  Can someone help me?

  Hi franckymaus,

  What model of laptop you have exactly?

• No AHCI in the BIOS in Satellite Pro A200

  I just installed an ssd and would like to change the bios to ahci utility but it is not an area that I am able to do this. the computer is a Toshiba Satellite Pro A200 (psfa1a-003002).

  I have to update the BIOS? Where can I get the update and how can I update?

  As I know the BIOS update does not offer some additional options. Please check the settings of the BIOS again. In the BIOS options there SATA advanced option and there you can change between compatibility and AHCI mode.

  I have it on my P200. It is almost identical machine but 17 and your model 15.

• Qosmio G50 change IDE to AHCI controller

  Hello
  I recently bought an SSD
  and the wand to increase its performance and the Firmware upgrade by changing the IDE SATA AHCI controller
  How can I change from AHCI? through the BIOS, I don't see any indication in the BIOS
  I read all disks to increase performance by changing the IDE SATA AHCI controller

  > wand to increase its performance and the Firmware upgrade by changing the IDE SATA AHCI controller
  May I ask if you are sure that something like this exists? I've never heard any update firmware for the IDE controller.

  Of course, you can update the BIOS and can install the SATA drivers that control the HARD disk controller, but you won't find any update of the firmware.

  > I read all disks to increase performance by changing the IDE SATA AHCI controller
  I know such option is available, not for all laptops and it is available only with the Phoenix BIOS.
  The G50 supports Toshiba BIOS and the HARD drive controller is always to SATA (AHCI).
  This means that you can not change it to IDE, and so the performance can be reduced or increased.

  In order to install a new OS, you must eat of storage which includes SATA drivers.

• Where is the SATA AHCI driver for the NB200 notebook?

  I searched the forum and I know that I should integrate the drivers under XP with Nlite, but I Don t find the NB200 AHCI driver in the driver download section!

  I don't know much about your model, but if you publish the chipset model, I'll try to find it for you:

  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=38

• Satellite L500D - AHCI driver for Windows XP

  Help, please.

  I need to install Windows XP on a Satellite L500D - 16K on AHCI mode not compattible. I can't find on toshiba or amd AHCI controller needed for this motherboard support notebooks, I can not even find the name of mothers everywhere.

  If I can use it on a stick for installing xp. pls help with a link or a Council

  Hey Buddy,

  I put t know what model of Satellite L500D you have exactly, but I can really recommend to read the discussions in the forum first before you start a new question. This has already been discussed 100 times before

  The AHCI driver, you can find in the package of official website of Toshiba display driver:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Check this box!

• NB 100, can't enable AHCI mode. Official driver will not install. help please!

  Hello

  Is someone can you please tell me how can I activate the AHCI mode after you have reinstalled Windows XP Pro on the NB 100? I try to install the official "Storage Manager drivers" but windows tells me that the machine does not meet the requirements.

  Help, please

  Yes, you can install the AHCI drivers * after * installation of XP in Compatibility Mode.

  Directions for use:
  http://support.Microsoft.com/KB/314082/en-us

• Portege R830-10V P/N: PT321E AHCI Driver for Win XP 32 bit

  Hello

  I'm looking for driver AHCI Inter chipset 6 series 32bi Win XP. I can't find any work. Tried drivers from toshiba web, I tried web drivers of intel - was trying to google for 4 hours in 2 men. His does not work.

  I can't have win 7 on it, because I have Windows NT 4.0 Domain control and Win 7 does not work.

  So, its simple, I have Windows XP installed with all the AHCI drivers.

  What do you im? Force just install driver AHCI (in the hardware Manager)-online BSOD appears, badly restarts, get bios and change the Compatible in AHCI. I got BSOD again, error is unaccesible by car or something like that so I don't know, I have bad driver. Should I change compatible and try a different driver. I tried this way, all the drivers package from toshiba support web and other Google.

  I had a call with the help of toshiba authorized and that they cannot help me, because they do not know.

  Please, can you, someone help me?

  Thank you.

  Perhaps this Toshiba HowTo might be useful for you
  [How to integrate the AHCI driver when installing Windows XP | http://aps2.toshiba-tro.de/kb0/HTD9401AN0000R01.htm]

• Can Equium L40 - I change hard drive SATA to AHCI Mode?

  Hello

  Anyone know if it is possible to change the hard drive to SATA AHCI (or same IDE) mode in the BIOS?

  I see the hard drive in the BIOS but I can't select to make changes as long as it is "gray".

  I installed the latest version of the BIOS, but that made no difference.
  Thank you very much.

  I put t have this model of laptop, but usually the controller SATA in BIOS mode options are AHCI or compatibility.
  I presume that it is set to AHCI.

  Your laptop's SATA HDD so I put t understand why you want to change anything. Using the AHCI mode HARD drive can operate at full speed.

• Satellite Pro L300 - Dual boot with the AHCI mode

  Type of product > Notebook
  Family > Satellite Pro
  Product series > Satellite Pro L series
  Model > Satellite Pro L300 24L
  Model short-term > PSLB9E

  Hello.

  XP and Seven is installed in dual-boot on my laptop and I use EasyBCD to choose which system I want to start.

  To start XP, I need to enable "Compatibility" (Controller SATA in BIOS mode) and seven is "AHCI" must be activated.

  Is there a way for my two OS was started without making changes in the bios?
  Y at - it an update to correct this problem (or alternative)?

  Thank you in advance.
  Marc

  Yes you can do it but I'm afraid, you must reinstall Windows XP Home edition m.
  Why? Because before beginning to install Windows XP Home edition, you must change it to AHCI mode, launch the installation of Windows XP Home edition and before you start you need to load the SATA driver (via F6 I think).

  Long time ago, we have discussed a lot about this on this forum then use the advanced search anc check options other postings on this subject.

  By the way: check http://aps2.toshiba-tro.de/kb0/TSB7B020R0000R01.htm

• Compaq 610: [Compaq 610, P/N: NX550EA #ACB] latest driver for the SATA AHCI for Win 7 PRO SP1 RUS x 64 controller.

  Hello world!

  Could someone, please, tell me, why there is no driver SATA AHCI controller for Compaq 610 for Win 7 PRO SP1 RUS x 64 in the download section of HP support for Compaq 610?

  (01) where can I get the latest version of the SATA AHCI controller driver for Compaq 610 for Win 7 PRO SP1 RUS x 64?

  (02) the original Intel (r) Matrix Storage Manager V8.9.0. 1023 will replace the ' Standart controller SATA AHCI 1.0 (Microsoft) "(v. 21.06.2006 6.1.7601.18231) with the more recent/latest version?

  (03) will be the upgrade of the SATA AHCI driver improve the speed of read/write of my any percentage HARD drives or this idea is nonsense and absolutely useless?

  I'll be very grateful for any useful info! Respectfully, Tianuchka))

  Hello:

  I would use it to HP... the description tells you what it does.

  The HP 6910P has the same controller and chipset as the 610 HP.

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=3357379 & swItemId = ob_85204_3 & swEnvOid = 4059 #tab1

  Who answers your questions first 2.

  Regarding the 3rd, I don't know whether or not you notice an improvement.

  If you want to update the driver, you can also install the last utility Intel chipset installation from the link below.

  Download, unzip and run the setup.exe file.  Then restart the PC.

  https://Downloadcenter.Intel.com/download/20018/INF-Update-utility-primarily-for-Intel-6-5-4-3-900-series-chipsets-zip-format

• Tecra A11 - 1F4 (PTSE0E-OM6052EN) which XP AHCI driver?

  I am trying to install the drivers for XP on a Tecra A11 AHCI;

  I have a ghost image that loads on this laptop in compatibility mode in the BIOS and I try to update the driver for the drive in AHCI controller, restart & change the disk to AHCI mode in the BIOS.

  That's what I usually do for HP laptops, we have, and it works most of the time.

  Storage power Toshiba drivers are in the form of an executable that will only work if you have AHCI enabled, how anyone runs in compatibility mode supposed to use these?
  They don't even extract driver files, you can use only the .cab files and an installer.

  I have listed in the device under IDE ATA/ATAPI controllers Manager;

  Intel (R) 5 Series/3400 Series Chipset Family 2 port Serial ATA Storage Controller - 3B2D
  Intel (R) 5 Series/3400 Series Chipset Family 4 port Serial ATA Storage Controller - 3B 28
  Primary IDE channel
  Primary IDE channel
  Secondary IDE channel
  Secondary IDE channel
  3 entries for Peter card reader &

  Intel drivers, I downloaded from-

  s http://downloadcenter.Intel.com/Confirm.aspx?httpDown=http://downloadmirror.Intel.com/21730/eng/f6flpy-x86.zip&lang=eng&DwnldID=21730&DownloadType=Driver & OSFullname = Windows + XP + *.

  .. .and it gives me the list of controllers to choose;

  Intel (R) 5 Series 4 Port SATA AHCI Controller
  Intel (R) 5 Series 6 Port SATA AHCI Controller
  Intel (R) 5 Series/3400 Series SATA AHCI Controller
  Intel (R) 7 Series Chipsets SATA AHCI Controller
  Intel (R) 7 series/C216 Chipset Family SATA AHCI Controller
  Intel (R) Desktop/Workstation/Server Express Chipset SATA AHCI Controller
  Intel(r) ICH10D / DO SATA AHCI Controller
  Intel(r) ICH10R SATA AHCI Controller
  Intel(r) ICH7M/MDH SATA AHCI Controller
  Intel(r) ICH9M - E / M SATA AHCI Controller
  Intel (R) Mobile Express Chipset SATA AHCI Controller

  The device ID of the controller (Intel (R) 5 Series/3400 Series Chipset Family 4 port Serial ATA Storage Controller - B 3, 28), I'm trying to install the drivers AHCI is;
  PCI\VEN_8086 & DEV_3B28 & SUBSYS_00011179 & REV_06\3 & 115 83659 & 0 & FA

  Please can someone tell me which of these to use with the above material?

  It takes me ages to build, install, bluescreen & rebuild to try again...

  Thanks for sharing!