AIO HP J 6480

Similar Questions

• AIO HP J 6480 AND HP LJ 1020: COMPLETELY UNINSTALL THE OLD DRIVERS OF HP PRINTER

  Recently, I upgraded my old HP (LJ 1020 and AIO J 6480) printers to the more current M HP and the HP AIO 8610 201dx.

  Older printers were great printers and I decided that it was time, and I gave them away to two of my students.

  There are remnants of the drivers for my older HP products in my system (LJ 1020 and AIO J 6480) and I can't find the software that completely removes the specific printer driver software.

  Please connect me with this software, or submit it to this announcement.

  Thank you in advance.

  Microsoft Surface Pro 3. 256 GB hdd, 8 GB of RAM. WIN 10; Docking station; 4 TB WD My Cloud mirror SAR for the storage file. HP LaserJet Pro M201 and HP OfficeJet Pro 8610 AIO. HP Elite 8000 Slim, SFF, Core 2 Quad 2.83 GHz, 8 GB RAM, 750 GB HDD, WIN10 (used mainly for broadcasting and as a PC Backup)

  Hello there @rjl24 , I hope you're well!

  Here are some links that might help remove the printer driver and software on your computer.

  HP Officejet software and utility of deletion of driver - IT professional use only

  Version 14 software and full scrub for no HP computers only below steps

  Best wishes!

• OfficeJet 6480 problem w fax setup, will not pass through wireless phone

  OfficeJet 6480.

  I took 20 minutes on the phone to find someone to get me to tell them what the problem is.

  the first speaker gave me a ticket #8018531464

  and passed me on the real tech support (I think).

  Finally, I asked if I could please tell him what my problem.

  He said yes and asked if f I have the black cord that comes with it.

  I said 'yes' and he pulled the plug (1 line) on the 6480.

  He hung up on me!

  hahaha, nope, the wwas cord connecting the cable-modem (TimeWarner) jack to the panasonic cordless phone.

  in any case, I wasn't going to go through the introduction of 20 min. again, only to find out if he could answer the question.

  So here it is.

  When I connect the black cable supplied with (for a single line I think) telephone jack of the cable modem (they provide my dgital phone, internet and Cable only ESA, no data dedicated line because I have to go through a flurry of faxes from time to time at home.)

  then the decision-making ext 2 'lines' on the 6480, another cord goes to the single input based on the receiver of the wireless phone.

  This is the problem, no tone came thru.

  so, in this loop, I inserted the small adapter, single-jac + cord short. the output of the 6480.

  and plugges regular there cord to the cradle of the wireless.

  I had a tone. It seemed to work so far. So I went to bed, feeling successful, to continue to ensure that I had

  useful with my 6480 fax equipment.

  However the next day it did not get a dial tone on the phone.

  I tried different combinations and then abandoned once more imn frustration.

  I tried to get this thing to work for a few months now.

  Once I had the parts of the loop of any kitchen. someone should sent the fax and the 6480 a o ring...

  ringtone and ringtone.

  He hgave been other variants of this scenario which have brought to the point of frustration, I said why bother, I'll do it at work.

  and not being able to devote a lot of time and energy with this easy start home.

  now since I've been laid off, I shortly and more neceessitty to fix this problem.

  I think that the signal gets to the 6480, because I run the test and all passses. There is no test for what I am referrring to and none combined on the 6480.

  I went into the details for several reasons,

  I can omit something: oh, Yes, the router is a lynksys router.

  There is a nearby office using the wireless router and a laptop computer in the other room.

  plus, you get a little history, to learn something on me, as you go through the same routine that I do with technical support. HP is not the only culprit of this approach non-customer ceneterd. But even that does not make this right.

  I suggest, if some listen to those interested. This customer centered woould be to first know of me what is my problem, while you may, or may not, to solve. Then, you can collect the serial number, etc..

  In addition, since you ask the serial number, I would like, as a customer, with that number clearly presented in a convenient place, say in my opinion as I llook at the machine.

  Yes, I know, its probably on the back, probably there insert n close the caps. no doubt.

  but I have to do a flshlight, reading glasses and get the machine our of the arrangement.a clever, bulky, puzzle - like real aesthetic. It's b

  I hope to hear from anyone. Thank you.

  Here is the document on the implementation for different kinds of digital lines (think VOIP is not listed) that could work however, the fax modules used in probably all HP AIO are for analogue telephone lines only (the kind of Ma Bell telephone lines that have nothing to do with computers).  So, you could be just out of luck unless you want to pay for another standard analog line in your home for the fax.  Sorry to be the bearer of bad news, but makes no sense you need to beat your head in frustration on something that is not likely to ever work.  Oh and another thing - make absolutely sure that the telephone line is connected to the fax to send/receive is the one supplied with the printer, they are not your average phone cords that come with phones or you can pick up at the local super store.

• J 6480 / Vista Home Premium, HP DV 6928: creation of a unique facility

  J 6480 / Vista Home Premium, HP DV 6928, also HP LJ 1020 for printing in b/w normal, which is hard wired for laptop:

  Finally implemented my 6480 J.

  Read about some installation issues and a few thoughts on the wire «Wireless and network print transcript to meet the Experts»

  My setup for Internet is:

  I have Roadrunner Internet from Time Warner cable service (10 MB load speed), but prefer to have it hard plugged into my computer (unless it is convinced of the contrary) because it will be theoretically faster Internet than the T-Mobile Router (secure WPA).

  I do not download movies but watch some TV shows via HULU and Fox.Com, etc..

  Notebook is Wireless 'G '.

  My wireless router is T-Mobile (D Link) and I turned it off, disconnected, at the present time.  Works very well, but I opted for the apparent faster cable connection.

  You want to use the printer J 6480 wireless to save cables and improve features J 6480 can be placed far enough away from the laptop, but not more than 25 feet.

  I do a lot of scanning, mainly with the 6480 J. Infrequent fax and occasional color printing.

  This configuration will be possible?, ad-hoc wireless, or it will be better if I connect wireless via the T Mobile router, or go to the hard wired base approach?

  Security may not be a problem or should I be concerned?   I live in an apartment building and other people use WiFi, all secure.

  I understand that the 6480 J can be Ad Hoc wireless connected to my laptop and seeks to find the advantages / disadvantages of this type of set up if no.

  Your views will be greatly appreciated.

  Set to take place this week: week of May 3 to May 7, 2009.

  Kind regards

  Robert

  Microsoft Surface Pro 3. 256 GB hdd, 8 GB of RAM. WIN 10; Docking station; 4 TB WD My Cloud mirror SAR for the storage file. HP LaserJet Pro M201 and HP OfficeJet Pro 8610 AIO. HP Elite 8000 Slim, SFF, Core 2 Quad 2.83 GHz, 8 GB RAM, 750 GB HDD, WIN10 (used mainly for broadcasting and as a PC Backup)

  Thanks Jim,

  Great idea to customize and securitize the Internet connection.  Use my link of D T Mobile for more security, I decided to go wireless, and so to have all greater security. It seems that no measurable loss of connection speed.

  I will try to implement the AIO as a Wi - Fi connection and hope that I am able to follow the online and other instructions.  My experience has been that it's usually me who Soundtracks, and Yes, sometimes the instructions to leave out some relevant step.

  I usually ask very detailed instructions and thanks for clarifying how to get IP address.

  Kind regards

  Robert

• What is the most recommended aio Printer Printer wireless?

  I have an old one I have Mac, using 10.8.5, I Pad 2, I have 5 phone. Liked my old aio Kodak but you want a printer affordable wi - fi. The old HP printers ink costs were outrageous! Now, I'm a bit wary of HP.

  List of Apple AirPrint printers - topic AirPrint - Apple Support

• HP Pavilion AIO: Camera stopped working for windows welcome

  The new AIO Pavilion came back with Windows 10 months and I used facial recognition to open a session.  All fine until 1 week ago, when the home screen says now "preparing...". "and"can't turn to the camera. Use the PIn to connect.

  If I go into RealSense, the camera works very well.  Windows settings for the camera are all lit, so nothing seems to have changed.

  What is a recent update of Windows 10 which changed the signal to the camera?  If so, how I restire it?

  Hi there @DavidG6,

  That the Forums are with you!  I understand that your web camera does not work properly for connection purposes.  I'm happy to help you with this.

  Assuming that it could be a recent update of Windows 10 which is the culprit, you can try using a computers HP - use Microsoft System Restore (Windows, 10, 8) to return to the level of before the problem appeared and see if it works now.  If so, then it is likely a change in software to your system.  Once you have determined that, then you can check: How to prevent Windows 10 to automatically download updated -howtogeek.com, prevent this set of updates.

  Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• Installed Windows 7 on HP Pavilion 23 AIO - Wireless does not

  Hi, I installed windows 7 to replace the 8 windows pre installed on my hp pavilion 23 aio PC and network drivers came out. I managed to get lan to work by getting drivers Realtek RTL811F downloaded and installed from usb, but the wireless won't come back

  Anyone know how I can make it work?

  In the Panel, there are several troubled devices - network controller, peripheral pci, pci simple communication controller, sm bus controller and bus unciversal controller

  Hello:

  The drivers of motherboard of this model should also work on your.

  DO NOT USE ALL DOWNLOADS OF BIOS OR FIRMWARE FROM THIS LINK

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063 & LC = on & CC = US & DLC = in & sw_lang = & Product = 5265168

  The specific drivers you need are:

  SMBus:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=CP-106361-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5265168 & sw_lang=.

  USB:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=CP-106744-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5265168 & sw_lang=.

  Comms Simple PCI:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=CP-116781-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5265168 & sw_lang=.

  PCI:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=CP-106746-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5265168 & sw_lang=.

  Try this driver for the wireless card. (The page on record your model does not show that it comes with the wireless network card).

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=CP-106131-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5265168 & sw_lang=.

  If this driver does not work, click on the network controller and view the ID of the hardware for it.

  Who can tell me what model wireless card it is, and I can post the link for the driver you need.

  If you don't know where to find the hardware ID, please read the guide at the link below.

  http://www.WikiHow.com/find-hardware-ID

• Pavilion 22-H010EL: need to replace the cable SATA in my AIO, can't find the right

  Hi all, I have a problem with my 22-H010EL AIO HP Pavilion TouchSmart.

  The hard drive broke twice while PC was covered by the warranty; now the warranty period is over, and the hard drive broke again. I guess that there is a power supply problem, in fact I see the hard drive has boots more than I actually received; Sometimes I hear a sound of boot clearly while the PC is on (and I'm sure that's not because of the stand by, because it happens while I use it). Also, just after the first replacement of hard disk, it showed 7 boots upward in an hour; I guess the power/SATA cable is damaged, the origin of the problem described, but it could be the motherboard, too.
  I would like to replace the cable to see if it works, I really hope he does it; Thanks in advance for any response.

  Hello! @korer621, thanks for the reply.

  You can find it in any computer store or you buy it on all Web sites online.

  Make sure you order the same part number.

  Let me know if you have any other questions!

  Have a great day!

  Please click "accept as Solution" If you feel my post solved your problem, it will help others find the solution.

  Click on the 'Bravo, Thumbs Up"at the bottom right to say 'thank you' for helping!

• Wireless using Photosmart 7280 AIO and Photosmart 3210 AIO USB - installation problem

  I use Windows XP sp2. The 7280 is new, so I was told HP support completely uninstall all my computer HP software, then install more software 7280, then use the menu option 'Add device' on the installation software of 7280 again to install the 3210. I have installed suceesfully 7280 software and am able to access the 7280 on my wireless LAN. However, when I use the installation of 'Add device' in the installation software, I get the dialog box 'Connect Your Device Now' (following the instructions for the installation of the USB) and when I connect the USB to my 3210 to the computer, I get the Windows Wizard 'addition of material", which is unable to locate the drivers for the 3210. The button 'Next' in the 'Connect Your Device Now' dialog box is not enabled, so I can't continue. It seems strange to me that Windows identifies the device but the HP software does not see. The 3210 is not in my list of printers in Windows.

  Even more strangely, yesterday I ran the base driver and utility download for the 3210 off the coast of the HP site after installing the 7280 software (probably shouldn't have done) and everything worked, I was able to print on both devices, however this morning when I turned on the computer I got a HP dialog box telling me that the installation failed and it can uninstall some software including all drivers 3210.

  Any suggestions? What I have to spend 2 + hours to uninstall and reinstall from the beginning again?

  Well, I think that I solved, at least as well as is possible. I just uninstalled, installed all the 3210 drivers downloaded from HP, then install the software suite full 7280. Both printers are available and print jobs, but the HP Solution Center software only allows me to access the AIO 7280, so I guess I won't be able to scan from my 3210 on my computer - I have to use the 7280 for this. I didn't install the software suite full of the 3210 - maybe that would give me two centers solutions HP (two different versions), one for the 3210 and one for the 7280...

  Incidentally, I don't have the CD 3210 - I think I have lost - so I'm dependent on the HP download page.

• HP photosmart AIO 7525; noisy and too long to print

  HP photosmart AIO 7525

  connected to a HP windows 7 64 bit

  It is my printer 2nd in 2 months (same model # from the same store).

  First, I went back to scratches and that I could not solve the problems of alignment.

  This, it is extremely noisy; It takes a minimum of 50 seconds to even begin printing, looks a keurig coffeemaker, and it continues to operate after the print job. Looks like it's lining up or clean the printhead everytime

  Initially, it would not connect to web services; but after 2 hours, I got it to work.
  In printing a page of a web page, the only thing that printed was clearly the company to the top, the page number, address date and files below. All him rest isn't clear (like the rest) and the characters are shredded and not aligned.

  Any help on these questions or I am going back this one too?

  Thank you

  No, it does not.

  the update does not apply to my system

  Win 7 64 bit

  I think I can just return it too

• HP OfficeJet 7612 e - AIO: DUPLEX PRINTING OPTIONAL & STANDARD

  Hello

  What does the 5.Lubrication Duplex printing means for HP OfficeJet 7612 e - AIO.

  Hello

  This means that a user can choose to buy it separately (as an option).

  The owner of a HP Officejet 7610 can buy the duplexer (optional) to activate automatic duplex printing.

  The HP Officejet 7612 comes with the duplexer as standard (in box)

  Hope says.

• Anyone who has used the service of third party of AIOS USA?

  I was contacted by a company called AIOS USA claiming to be third party Apple support and they sell me a series of plans Apple Care for my MacBook Pro at a reduced price that Apple sells.  What led them to me was a claim that their Global MicroSoft Server showed that a crowd of error returns. They claim they can provide such care as an authorized Apple reseller and services plans.  The planned number was 800-316-2052.  Anyone had experience with this company?

  They try to rip you off.

  This phone number has been reported as a phishing site that will try to steal your ID.

  I would highly recommend against qualifying.

• D160QD: Black screen on Envy AIO 23

  I have an Envy23 AIO ToichSmart... My PC has quit the boot (black screen)... I tried to change the memory, motherboard and map of scalar... Still, does not start upward...
  I have 8 GB of memory in her...
  
  For the purpose of troubleshooting... I tried different memory... 2 GB... The machine starts... If I put in 4 GB of memory or even memory 8 GB 1600 that the computer came with... It does not start until... Why the memory size is now a problem? I need to replace to get my computer working normally again?
  
  Help, please

  FINALLY SOLVED my problem...

  I had installed Windows 10 and it corrupted my bios...

  I was able to start the computer with a 2 GB to 8 GB chip chip inplace.

  I downloaded the upgrade of the BIOS and installed...

  Then I formatted and reinstalled the OS and I no longer have a black screen...

  System starts every time now.

• Lines on copies b & w with OfficeJet Pro 8600 e - AiO

  When I make a copy in black and white with our 8600 Pro OfficeJet e - AiO output contains several vertical lines. If I press the color instead the output is fine. Cleaning is obviously not in this case.

  No problem with printing or fax either

  Try to take a look at the solutions suggested here http://support.hp.com/us-en/document/c02881567

  Good luck.

• How do I scan multiple pages using HP PhotoSmart AIO 5512

  With Windows 7 64 bit wireless for HP 5512 AIO printer.  Try using the HP software to scan several pages in a single document, but it does not provide options or the possibility to do so.  Is there a switch or a control or something escapes me or do I need a different software?  I could do with my old PhotoSmart Plus (B209A).

  Hello ScooterSim

  I understand what you mean. Try to change the resolution to 300 dpi or lower, some printers are unable to analyze multi-page documents to over 300 and it is then hidden.