Airport Extreme cannot connect with KoboAura ereader and Beloit airplay 12 speaker

Similar Questions

• Airport Extreme cannot connect to 1000base t

  Description:

  Hi all.  My ISP is Cox Communications in the South of Louisiana.  I am currently subscribed to get 200 Mbps download speed.  I have an Arris Surfboard 6190 cable Modem.  Ethernet is connected to an Apple Airport Extreme 802.11ac, who then goes to my iMac (2011) as a high school Apple Airport Extreme 802.11ac (network extension).

  The problem.  Modem guard fall signal forcing me to reset the modem about 3 times / day.  Level 2 of Cox support said I need set the local IPv6.  This modification of the parameter stop the Modem from falling (in the process to test this now).

  2nd problem.  My iMac, nor either routers Apple will connect higher than 100base T.  I can see it in the utility network on the iMac.  The support of Cox who sees so.  However, when I connect the Airport Extreme directly to the Modem, Cox support can see that it is a Gigabit device, but after a few seconds, he is down to 100base T.  If I try to manually connect to 1000Base T on the iMac... it will not connect.

  Is there something that I am missing in my settings on the routers or the iMac?

  It is known of problems between all a single serial port SB modems and routers from the airport...

  There is no solution... or is defective, but they hate just each other.

  The best solution is the replacement of the modem or the router.

  We have been recommending the brand zoom but with Cox even modem that can not solve the problem... so I recommend a different router for now... a cheap... it will work quite low-end... TP-Link WR1043ND v2 or v3 for example... It is aprox $50 on Amazon. You can still use the airport bridge and work with Mac protocols for wireless AP.

  Normally, you could fill the AE to the new router, but you can give it a more active role... See the static IP address.

  https://discussions.Apple.com/message/25135547?ac_cid=tw123456#

• Why has my connection AirPort Extreme recently stopped with my Tablet Android and Windows 7 laptop, but connects very well with all Apple devices?

  Why has my connection AirPort Extreme recently stopped with my Tablet Android and Windows 7 laptop, but connects very well with all Apple devices?

  What exact model of AirPort Extreme do you have? Either have your tablet or laptop Win7 been updated recently? They were both able to connect before and not now OR they were never able to connect? Can the laptop Win7 access Internet when connected by Ethernet? One of these devices have problems connecting to other networks Wi - Fi?

• 1st generation Apple TV cannot connect with the apple ID

  Have 1st Generation apple TV and recently cannot connect with my apple ID.

  The reset several times and nothing.

  Help?

  You have activated 2 no authorization of your Apple ID? If so, disable the connection from a browser and temporarily, then connecting ATV, then reactivate. If not, please describe what is happening when you try to connect. What message do you have?

• Error 641 cannot connect to Windows Installer and it could be installed incorrectly & error 80070641for Windows Update.

  Original title: Windows Installer does not properly.

  I am running with Vista SP 2 and since June, I have had many updates windows installation failures and get error 641 80070641 and just. Also have had difficulties to install other software. Tried to download Fixit but it wouldn't install and gave me an error 641 and message saying cannot connect to windows install and it could be installed incorrectly. I changed nothing because it has worked well. Also when I press start button to the right next to the stop etc. which is fior install and then stop includes an exclamation in yellow.  I hope someone can help, Murray

  Hi Murray,

  Have you followed the steps in your previous post?

  Because of Windows Installer, you can follow this link & check if the problem persists:

  Problems installing and uninstalling programs on Windows computers

  Hope the helps of information.

• I can't create a new site of catalyst for business with Dreamweaver CC 2014. The error message states that Dreamweaver cannot connect with the server, try again later. How can I solve this problem?

  I can't create a new site of Business Catalyst with Dreamweaver CC 2014 (Mac). The error message states that Dreamweaver cannot connect with the server, try again later. In addition, I am also unable to load remote site Business Catalyst created previously as it says that there is something wrong with my user name or password. However when I put my password and press to test the connection, he said that it has connected successfully. What is wrong and how can I solve this problem?

  Thank you

  Thanks for the reply, however it seems to work again after I removed some unused Dreamweaver sites in the section "manage sites" in Dreamweaver.  It may have been a conflict of name or something.

  Concerning

  Adrian

• Why cannot connect with DB after control DB console configure NetMgr/NetCA?

  People,
  
  Hello. I am running Oracle Database 11 GR 1 material in Oracle Linux 5.
  
  Before you configure Net Manager/Net CA, database https://localhost.localdomain:1158 control console / em, SQL * more and Developer SQL to connect to the Instance of database DB1. All instructions SQL runs correctly.
  
  After Configuration Manager Net/NetCA, all the tools of Admin above cannot connect to the Instance of database DB1 is the only case of DB.
  
  What I've done is added 2 headphones more in Net Manager.
  
  The original listener does not change which properties are: Protocol TCP/IP, Host localhost, Port 1521
  
  Can any folk tell me what causes all the administrative tools cannot connect with DB1 after configure NetManager/NetCA?

  user8860348 wrote:
  People,

  Hello. Thanks much for the reply.

  ORACLE_HOME/bin directory, the command. / sqlplus SYS/SYS used to run correctly after the installation of the database. But after stopping Linux operating system, the command. / SYS/SYS cannot connect with Dabase more sqlplus.

  I think that the command. / emctl start dbconsole should start to the top of the database. Am I wrong?

  NO, you're not correct.

  >

  Is there another way to start the database?

  sqlplus
  / as sysdba
  startup

  as shown below
  BCM@BCM-laptop: ~ $ sqlplus

  SQL * more: Production release 11.2.0.1.0 Sun Jul 17 20:05:09 2011

  Copyright (c) 1982, 2009, Oracle. All rights reserved.

  Enter the user name: / as sysdba
  Connect to an instance is idle.

  SQL > startup
  ORACLE instance started.

  Total System Global Area 1553305600 bytes
  Bytes of size 2213656 fixed
  1275070696 variable size bytes
  268435456 buffers of data bytes
  Redo buffers 7585792 bytes
  Mounted database.
  Open database.
  SQL >

• cannot connect with sysadmin

  Hello.
  
  I'm sure that the password has not been changed, but suddenly users cannot connect with this responsibility.
  
  I'm tempted to change the sysadmin password and test, but it is not really an option that users should continue to use the original password.
  
  I checked the Apache logs that confirm that
  
  %3A8004%2Foa_servlets%2Foracle.apps.Fnd.SSO.AppsLogin & errCode = FND_APPL_LOGIN_FAILED & returned = US & username = SYSADMIN HTTP/1.1 "200 7331 0
  
  any advice much appreciated!
  
  DA

  Hi Dan,.
  Please check my last post.

  Cannot change password for existing users and new users [422501.1 ID]

  Thank you

• My 5s iphone suddenly showed no service, then I made an attempt to update to ios and itunes connected, now iphone is not enable and display cannot connect to the server and in itunes it shows unable to check your device.please help me

  My 5s iphone suddenly showed no service, then I made an attempt to update to ios and itunes connected, now iphone is not enable and display cannot connect to the server and in itunes it shows unable to check your device.please help me

  Assuming that you have a valid SIM card in the phone, it is more often symptomatic of a phone that has been hacked or jailbroken to unlock.

  Where do you have the phone first?

• Is it normal for my AirPort Extreme to run his fan on and off every 2 ' minutes throughout the day?

  I have a 2nd ae put in place to extend our network.  The second flashing yellow from time to time, always in the works, but the fan runs constantly II never heard our other use on the fan.  Never.

  If you ask about the current 'tour' in the form of version of AirPort Extreme, the fan runs constantly... (and normally very quietly)... as long as the AirPort Extreme has the power.

  This is the model you have?  If so, then the airport is defective. If the product is less than one year, or you have AppleCare implemented on one of your Macs... and... He airport most convenient is less than 3 years, Apple will replace the device for you.

  If your AirPort Extreme is not covered... and you are an it yourself type of person... you can open the AirPort Extreme and are looking for a replacement of the fan.  This article will give some tips on the opening of the product. Note that section provides the number of manufacturer and model of the fan, so you can use it to search for a replacement.

  AirPort Extreme A1521 teardown - iFixit

• Skype cannot connect with the latest version?

  Hello there guys. I got the error "Skype cannot connect" with the latest version? I tried to reinstall Skype, so that delete my Skype folder in %AppData%, it did not work, I have to do? I tried to log in with your new account, still no luck? How can I sign in Skype... ?

  So I just fixed my problem by installing win 8.1 Pro 64 bit hehe Thx for the help anywayz.

• Cannot connect with active domain Directory, because the local policy of this system does allow you to log on interactively.

  Cannot connect with active domain Directory, because the local policy of this system does allow you to log on interactively.

  You will need to create a new post on the TechNet forum for assistance in the field of related issues:
  http://social.technet.Microsoft.com/forums/en/category/w7itpro/

• "Try to connect with the server" and the update bar remains at 2%

  Hello, my creative cloud is not updated, there simply to appear the message "Try to connect with the server" and the update bar remains at 2%. How could I solve this problem? Thank you.

  Mac or Windows and EXACTLY what version of the operating system?

  Recent Mac AND Windows operating systems have been known to cause problems "weird."

  Please read https://forums.adobe.com/thread/1499014

  -try some steps such as changing browsers and disable your firewall

  -also clear the cache of your browser if you start with a fresh browser

  -check the file hosts for blocked entries https://forums.adobe.com/thread/1912777

  http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip.

  https://helpx.Adobe.com/creative-cloud/KB/creative-cloud-desktop-application-failed.html

  http://helpx.Adobe.com/creative-cloud/KB/failed-install-creative-cloud-desktop.html

• Network with Airport Extreme problems connected to the Linksys switch

  I have a wired network in my house.  It has the following configuration: Modem base station Airport Extreme for Linksys switch and then all wired connections.  It is in a wiring closet in a room upstairs.  I have 2 other extremes from the airport, to spread out of the range, but they are currently disabled and disconnected from the network until I have found why I get auto ip address on several of my wired connections.  I have reset the modem, EI and switch.  More wired connections seem to be working very well, but there are 4 or 5 who say that the ethernet cable is connected, but it can not connect to the internet because of a self assigned ip address.  I thought maybe it was a problem with the port of the switch, but when I plugged a cable work in, everything worked again.  Thus, for example, on my iMac, in a study downstairs, I had plugged on the ethernet port in the wall.  He let me only to connect to wireless internet.  He says the ethernet connection had a self assigned ip.  I went upstairs and took the cable from the switch and directly connected to the Airport Extreme, and then connect to this iMac worked fine via ethernet.  So I'm really confused as to why it does not work when it is connected to the switch.  Why are only a few connections ethernet works and others not?

  Any help would be greatly appreciated.

  Why are only a few connections ethernet works and others not?

  Because either you have a bad port on the switch (unlikely, but possible) or a wired Ethernet connection bad, or maybe both ends of several of the Ethernet cables (99% of the time, the problem is in the wiring or connectors Ethernet... not the switch).

  But, we must test the switch first and then work from there.  It might be much easier to call a guy from wire or the custom installation specialist to do all this for you, but if you want to give it a try... Here's how.  It is not difficult at this stage, just take some time.

  Unplug the switch except the Ethernet cable that connects the AirPort Extreme to each cable Ethernet switch.  Label each Ethernet cable with a number or a letter you can install the wires in their original position on the switch.

  Use of a laptop computer with an Ethernet port and a short, spare Ethernet cable... virtually no matter what length will make... and turn off the WiFi on the laptop so it should use Ethernet to connect to Internet.

  Test an Ethernet port on the switch with the laptop and the Ethernet cable to make sure that you have get a good Internet connection. If you do so, test the next port of the switch. Continue until all ports of the switch has been tested.  With luck, they will all work.

  If this is the case... which is likely... then you know that the Ethernet switch is working properly.

  Now things get a little more complicated. Ideally, you have documentation that tells you what Ethernet cable goes to what area of the House. If you don't, just connect the Ethernet cable to the switch... then go to the other end of the Ethernet cable to the wall outlet and connect the computer laptop and short Ethernet cable to the wall socket.

  If you have no documentation to indicate where each cable goes, so go ahead and connect all the Ethernet cables to the switch.

  Still, make sure that the wireless is disabled on the laptop so that it can only connect to the Internet via an Ethernet connection. Check if you can get a good connection Internet in this way. If you can, then you know that the individual Ethernet cable and the Ethernet port on the wall are working properly...

  Test other areas one at a time the same way.  You are very likely going to find Ethernet cables or a wall of ports that do not work properly. The hardest part here is that you... or a wire guy... will have to check the Ethernet cable at both ends to ensure that the Ethernet Sockets have been installed correctly.  It is not easy. The wires are tiny and its easy to get involved.  Installation of new Ethernet cards, it's really a job for an experienced guy who will provide hopefully a cable Tester well when it comes.

  Some Ethernet will certainly be replaced.  In rare cases, the cable itself has a break somewhere... and it's not easy to fix something like this, without pulling new cable... that would not be possible according to the House provision.

  When you know that all ports on the switch are working and all ports Ethernet wall around the House work... so... we can get the network set in place and working properly.

• How will I know if my Airport Extreme has the latest firmware?  And (not related) how to change the password used to connect to my network?

  I think I bought the latest version of Airport Extreme.  It is the unit which is rectangular, is about 6 to 7 w., etc.  I have some basic questions that I do not understand:

  1. How will I know if I have the latest firmware for this device?  I read a few posts that make it sound as if it was just automatically updates.  Is this true?

  2. can someone tell me how to change the password used to connect to my wireless network?

  Thank you very much!

  Chris

  If a firmware update is available, AirPort Extreme flashes orange.

  The most up-to-date version of the firmware is 7.7.3.

  You can see what version you currently have the following on your Mac...

  Open Finder > Applications > utilities > AirPort Utility

  Click on the image of the AirPort Extreme

  Look for the Version

  If the new firmware was available, you will see a button update here

  To change the wireless network password...

  Click on edit in the window smaller than you watched just to check the firmware version

  Click on the Wireless tab at the top of the next window

  Go back / change the wireless password and enter a new password

  Do the same thing to check

  Click Update at the bottom right of the window and give the airport a minute full for restart