Airport utility show that airport extreme has a problem, but it remains inaccessible

My Airport extreme began to play up.  As you can see in the picture, it seems to have a problem and cannot be opened for editing.  I tried several times to do a hard reset and reinstall my setup.  It works and the network remains functional, but after a few minutes, the Base Station will appear with this warning sign.  Any ideas on how to solve this problem?

A 'solution' refers to those who have set up their base stations for Back to My Mac. If you did, how to follow recommended action is temporarily remove or disable this option, as follows:

  • Run the AirPort Utility.
  • Select the base and then station, select change.
    • Note: You may need to use the option "configure others...". "to access the base station. Enter the IP address of the base station, the default value is: 10.0.1.1 and base station administrator password when you are prompted.
  • On the tab of the Base Station, go back to the section of my Mac at the bottom of the window.
  • If you have entries here, select it and click then the minus sign "-" button to remove it.
  • Click on update and allow the base station restart.

Tags: Wireless

Similar Questions

  • The airPort Extreme has green light, but nothing can connect to it.

    My 5th generation AirPort Extreme suddenly stopped allowing all devices connect via WiFi or Ethernet. I can't see it in the AirPort Utility, I can not access it via the browser, and I've rebooted several times without success. I'm afraid, it may have just died, but I'll try to revive because while I can buy a new one, I hate the look of the new units. Any suggestions?

    Try powering down of the entire network... all devices... in any order you want

    Wait a minute

    Start the modem and let it run a few minutes

    Start the AirPort Extreme and run a full minute

    Keep a minute out one at a time until the entire network is back of boot devices

    Report on the results

  • Add a second macbook air, now the airport extreme has stopped working

    I got a new (for me) 2012 macbook air to replace my MBA 2010 last night. I had another macbook air on the network to download some files in iCloud. As soon as I started the MBA new upward across the network crashed. (Features were always connection ac Airport Extreme router, green light, but no internets).

    Restart the router helped briefly before the problem comes back. When I connect with the new MBA, I had seen an error there are two Macbook Air on the network and it was changing the name of one of them.

    I read somewheres that download great traffic and a lot of features sometimes overwhelms the airport extreme (huh? not very extreme), so I made the turn power off the wireless on iPad, apple tv and the old MBA. This, most reboot the router and the modem seemed to do the trick for a while, until that there no more.

    I read around DiscoveryD and the problems with Hello. Will try this angle when I go home.

    I see here that maybe I need to reset (rather than just reboot) my router now that there's a new kid on the block - the new MBA.

    Any other ideas?

    Where did you got your 'new' MacBook Air? Apple or an evening private? If the latter, it can be configured as such not "play well" with your existing home network. If you have received this by a private party, I strongly suggest you reload a clean version of the feature of MacOS X. In this way you will start with a Mac "out-of-the-box" and should have an easier time getting connected to your network without problem.

  • I follow the plan. But he still need me to buy the app. It shows that the trial has expired. And then I had to buy. He asked to sign and said: I have subscription to use.

    I follow the plan. But he still need me to buy the app. It shows that the trial has expired. And then I had to buy. He asked to sign and said: I have subscription to use.

    Troubleshooting FAQ: What should I do if I have a subscription, but my application acts as if I had a trial?

  • I've updated my card information and it still won't let me in adobe. It shows that my plan has expired and that it does not give the possibility to renew the plan. I have day my credit however information. Help, please

    Help. I've updated my credit information and it shows that my plan has expired

    Contact adobe support by clicking on this link then "still need help" as soon as it appears, http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • Whenever I do a right click on a file I get the error message that Windows Explorer has a problem and needs to close

    original title: problems of files

    Whenever I do a right click on a file I get the error message that Windows Explorer has a problem and needs to close.

    Sometimes, the problem is caused by a third-party extension. ShellExView can be useful to see what shell extensions have been introduced in the Explorer. Lire read on this topic, then scroll down to download the x 86 (32-bit) or x 64 (64 - bit) version here near http://www.nirsoft.net/utils/shexview.html

    When you run it, click the column of company for sequence entries in alphabetical order. Suppose Microsoft entries are in good faith and focus on others. Is something listed that is useless or unknown? If so, select it and click the Red (on top left) task to turn it off. You can find more easy to disable them all and then reactivate (green area) one at a time and Explorer of execution until the culprit is found.

  • I have my laptop can't detect a wireless adapter or access point. It shows that the network connection is excellent but I can't always connect to the internet.

    I have my laptop can't detect a wireless adapter or access point. It shows that the network connection is excellent but I can't always connect to the internet. It happened suddenly and with no warning or cause. I tried to turn off the modem for 10 seconds and turning it back on, but I still had the same problem. What should I do? Help, please.

    Hello

    Maybe this can help, http://www.ezlan.net/wireless.html

    Jack-MVP Windows Networking. WWW.EZLAN.NET

  • The box at the top right shows that I have an unread message, but nothing appears on the list of received messages. .

    The box at the top right of the hotmail page shows that I have an unread message, but nothing appears on the list of received messages.

    Hello

    The question you have posted is related to Windows Live Hotmail; This is why it would be better suited in the Windows Live community. Please visit the link below to find a community that will provide the best support.

    http://www.windowslivehelp.com/product.aspx?ProductID=1

    http://www.windowslivehelp.com/

  • Win 7 Home Premium 64-bit, shows that it is valid and active, but still get the error code to activate 0x8004fe21.

    I've owned my XPS Dell for more than 2 years, (that I bought new from Dell) and last week I started to get the ' don't not Genuine Microsoft..., "I'm under Win 7 Home Premium 64-bit, which shows that it is valid and active, but I still get the error of 0x8004fe21 activation code.

    I did all the basics, slui.exe, slui3.exe, slui4.exe, which all say successful activation, but remains constantly get the error of 0x8004fe21 activation code.

    Here are the diagnostic report:

    Diagnostic report (1.9.0027.0)

    Diagnostic report (1.9.0027.0):
    -----------------------------------------
    Validation of Windows data-->

    Validation code: 0x8004FE21
    Code of Validation caching online: 0x0
    Windows product key: *-* - 7TK7X - CDPPC-7YHYV
    The Windows Product Key hash: n8Vo57Hev5XM5pGp/e7rfYVx5sQ =
    Windows product ID: 00359-OEM-9805391-45580
    Windows product ID type: 8
    Windows license type: COA SLP
    The Windows OS version: 6.1.7601.2.00010300.1.0.003
    ID: {2EBA2488-7B3E-46A9-9D19-B92E3C47E8F8} (3)
    Admin: Yes
    TestCab: 0x0
    LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
    Signed by: n/a, hr = 0 x 80070002
    Product name: Windows 7 Home Premium
    Architecture: 0 x 00000009
    Build lab: 7601.win7sp1_gdr.120503 - 2030
    TTS error:
    Validation of diagnosis:
    Resolution state: n/a

    Given Vista WgaER-->
    ThreatID (s): n/a, hr = 0 x 80070002
    Version: N/a, hr = 0 x 80070002

    Windows XP Notifications data-->
    Cached result: n/a, hr = 0 x 80070002
    File: No.
    Version: N/a, hr = 0 x 80070002
    WgaTray.exe signed by: n/a, hr = 0 x 80070002
    WgaLogon.dll signed by: n/a, hr = 0 x 80070002

    OGA Notifications data-->
    Cached result: n/a, hr = 0 x 80070002
    Version: N/a, hr = 0 x 80070002
    OGAExec.exe signed by: n/a, hr = 0 x 80070002
    OGAAddin.dll signed by: n/a, hr = 0 x 80070002

    OGA data-->
    Office status: 100 authentic
    Microsoft Office Basic Edition 2003 - 100 authentic
    OGA Version: N/a, 0 x 80070002
    Signed by: n/a, hr = 0 x 80070002
    Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

    Data browser-->
    Proxy settings: N/A
    User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
    Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
    Download signed ActiveX controls: fast
    Download unsigned ActiveX controls: disabled
    Run ActiveX controls and plug-ins: allowed
    Initialize and script ActiveX controls not marked as safe: disabled
    Allow the Internet Explorer Webbrowser control scripts: disabled
    Active scripting: allowed
    Recognized ActiveX controls safe for scripting: allowed

    Analysis of file data-->
    [File mismatch: C:\Windows\system32\wat\watadminsvc.exe[7.1.7600.16395], Hr = 0 x 80092003
    [File mismatch: C:\Windows\system32\wat\watux.exe[7.1.7600.16395], Hr = 0 x 80092003
    [File mismatch: C:\Windows\system32\sppobjs.dll[6.1.7601.17514], Hr = 0 x 80092003
    [File mismatch: C:\Windows\system32\sppc.dll[6.1.7601.17514], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\sppcext.dll[6.1.7600.16385], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\sppwinob.dll[6.1.7601.17514], Hr = 0 x 80092003
    [File mismatch: C:\Windows\system32\slc.dll[6.1.7600.16385], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\slcext.dll[6.1.7600.16385], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\sppuinotify.dll[6.1.7600.16385], Hr = 0 x 80092003
    [File mismatch: C:\Windows\system32\slui.exe[6.1.7601.17514], Hr = 0 x 80092003
    [File mismatch: C:\Windows\system32\sppcomapi.dll[6.1.7601.17514], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\sppcommdlg.dll[6.1.7600.16385], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\sppsvc.exe[6.1.7601.17514], Hr = 0 x 80092003
    [File mismatch: C:\Windows\system32\drivers\spsys.sys[6.1.7127.0], Hr = 0 x 80092003
    [File mismatch: C:\Windows\system32\drivers\spldr.sys[6.1.7127.0], Hr = 0 x 80092003
    [File mismatch: C:\Windows\system32\systemcpl.dll[6.1.7601.17514], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\user32.dll[6.1.7601.17514], Hr = 0x800b0100

    Other data-->
    Office details: {2EBA2488-7B3E-46A9-9D19-B92E3C47E8F8}1.9.0027.06.1.7601.2.00010300.1.0.003x 64*-*-*-*-7YHYV00359-OEM-9805391-455808S-1-5-21-1800837603-2485805944-2960746992Dell Inc.. Studio XPS 8100 Dell Inc.. A05 20100708000000.000000 + 0004A693407018400FC04090409Time(GMT-05:00) Standard is03DELL FX09 100100Microsoft Office Basic edition 2003114dtxPQcSBdfvAVAMubAVy3TZOgQ =73102-OEM-5695703-736765 9EDDBCB8239FF7A

    Content Spsys.log: 0 x 80070002

    License data-->
    The software licensing service version: 6.1.7601.17514

    Name: Windows 7 HomePremium edition
    Description: operating system Windows - Windows (r) 7, channel OEM_COA_SLP
    Activation ID: 5e017a8a-f3f9-4167-b1bd-ba3e236a4d8f
    ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
    Extended PID: 00359-00196-053-945580-02-1033-7601.0000-2562012
    Installation ID: 020314789613610665841200172506767716013075146504391195
    Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
    Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
    Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
    Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
    Partial product key: 7YHYV
    License status: licensed
    Remaining Windows rearm count: 4
    Trust time: 20/09/2012-09:47:28

    Windows Activation Technologies-->
    HrOffline: 0x8004FE21
    HrOnline: n/a
    Beyond: 0x000000000001EFF0
    Event time stamp: n/a
    ActiveX: Registered, Version: 7.1.7600.16395
    The admin service: recorded, Version: 7.1.7600.16395
    Output beyond bitmask:
    Altered the file: %systemroot%\system32\sppobjs.dll
    Altered the file: %systemroot%\system32\sppc.dll|sppc.dll.mui
    Altered the file: %systemroot%\system32\sppcext.dll|sppcext.dll.mui
    Altered the file: %systemroot%\system32\sppwinob.dll
    Altered the file: %systemroot%\system32\slc.dll|slc.dll.mui
    Altered the file: %systemroot%\system32\slcext.dll|slcext.dll.mui
    Altered the file: %systemroot%\system32\sppuinotify.dll|sppuinotify.dll.mui
    Tampered files: Check %systemroot%\system32\slui.exe|slui.exe.mui|COM
    Altered the file: %systemroot%\system32\sppcomapi.dll|sppcomapi.dll.mui
    Altered the file: %systemroot%\system32\sppcommdlg.dll|sppcommdlg.dll.mui
    Altered the file: %systemroot%\system32\sppsvc.exe|sppsvc.exe.mui
    Altered the file: %systemroot%\system32\drivers\spsys.sys

    --> HWID data
    Current HWID of Hash: LAAAAAEAAAABAAEAAQACAAAAAQABAAEAln0eHvbaEqbcJVCZYj0Qeqw6XF0 =

    Activation 1.0 data OEM-->
    N/A

    Activation 2.0 data OEM-->
    BIOS valid for OA 2.0: Yes
    Windows marker version: 0 x 20001
    OEMID and OEMTableID consistent: Yes
    BIOS information:
    ACPI Table name OEMID value OEMTableID value
    APIC DELL-FX09
    FACP DELL-FX09
    HPET DELL OEMHPET
    MCFG DELL OEMMCFG
    FX09 DELL SLIC
    OSFR DELL-FX09
    LASRYVITRAGE DELL-FX09
    ASF!   LEGEND I865PASF
    SSDT DpgPmm CpuPm

    Here are the results of the sfc/scannow:

    Microsoft Windows [Uersion 6.1 7601]

    Copyright (c) 2009 Microsoft Corporation. All rights reserved.
    C:\Windows\System32>sfc/scannow
    Start scanning system. This process will take time.
    Start of the phase of verification of the scanning system.
    Full check of 100%.
    Windows resource protection found corrupt files but was unable to repair some of th
    EM.
    Details are provided in convertible bonds. Journal windir\Logs\CBS\CBS.log. For example
    C:\Windows\Logs\CBS\CBS.log

    I can send the cbs.log log if necessary.

    Thank you

    SoC

    The common cause for these mismatches is a defective Intel Rapid Storage Tech driver

    Download and install the latest version of...

    http://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=2101&DwnldID=21730

    Then run another MGADiag report and view the results.

  • Tried to download cc and I continue to get the message that the program has been downloaded but altered. What is best to do next?

    Tried to download cc and I continue to get the message that the program has been downloaded but altered. What is best to do next?

    Hi Raoul,.

    Please see the below help documents to solve the problem:

    1. https://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html

    2. https://helpx.adobe.com/creative-cloud/kb/error--60-trying-download.html

    Kind regards

    Sheena

  • How will I know if my Airport Extreme has the latest firmware?  And (not related) how to change the password used to connect to my network?

    I think I bought the latest version of Airport Extreme.  It is the unit which is rectangular, is about 6 to 7 w., etc.  I have some basic questions that I do not understand:

    1. How will I know if I have the latest firmware for this device?  I read a few posts that make it sound as if it was just automatically updates.  Is this true?

    2. can someone tell me how to change the password used to connect to my wireless network?

    Thank you very much!

    Chris

    If a firmware update is available, AirPort Extreme flashes orange.

    The most up-to-date version of the firmware is 7.7.3.

    You can see what version you currently have the following on your Mac...

    Open Finder > Applications > utilities > AirPort Utility

    Click on the image of the AirPort Extreme

    Look for the Version

    If the new firmware was available, you will see a button update here

    To change the wireless network password...

    Click on edit in the window smaller than you watched just to check the firmware version

    Click on the Wireless tab at the top of the next window

    Go back / change the wireless password and enter a new password

    Do the same thing to check

    Click Update at the bottom right of the window and give the airport a minute full for restart

  • The Airport Extreme has download slow unless its an apple product

    I need help.  I have an Airport Extreme router.  I run a HP all in one office, two smart TV, Wii and two boxes on my router.  Not all work at the same time, nor do two pass at the same time.

    I check my router on Mac speed: 100 Mbit/s easy.  I check my iphone: 100 Mbps.  I checked the HP desktop computer: 30-50 Mbps.  I haven't checked the Wii, Smart TVs do not open always Netflix, my boxes go slow and buffer for long periods of time.

    There must be a setting that does not allow non-Apple products to run more slowly.  I pay 100 Mbps and expect to receive 100 Mbps on the Airport Extreme for all products, not just Apple products.

    What I could try or have I missed that should be done so all non-Apple products get the speed of download and Apple products?

    I called support and they had me change the channels in the configuration of the Airport Extreme wireless.  That did not help.  I changed them back and now the iPhone runs slower, below 50 Mbps upload when you fill out a speed test on www.speedtest.com.  I'm sitting in the same place.  It makes no sense at all.

  • The AirPort Extreme has it double bands?

    I'm looking into buying an AirPort Extreme. Support double bands? If Yes, can I set up so that the two groups have the same network name, and the device can choose which one to use?

    Support double bands?

    Yes, by default.

    can I set up so that both groups have the same network name.

    It is the default set up for AirPort Extreme.  It is also possible to assign different names to the bands 5 GHz and 2.4 GHz if you wish.

    and the device can choose which one to use?

    In theory, Yes. In practice, things don't always work out so although theory suggests, you need to check and see how well facilities choose their connections in your home.

  • I tried to register my apple products like the Mac Book Air Online, but it shows that your request has failed

    Can anyone help me with any alternative option to register my product in mine

    There is no need to do so much more. See: your Support for purchases registered profile.

  • MPG file shows that the video has green on windows media player 11 help

    a title says every time I want to play a video file pc mpg, video is green but the audio is fine and my graphics driver is up to date, I'm not sure what my next step please hep me

    E-mail address is removed from the privacy * to answer please

    You may experience problems with lack of Codecs?

    Vista Codec Package Final v5.4.3
    http://www.MajorGeeks.com/Vista_Codec_Package_d5326.html

    Basically, the K-Lite Mega Codec Pack is going to play all video files on this planet.

    K - Lite Mega Codec Pack
    K - Lite Codec Pack Full (less features)"

    K - Lite Mega Codec Pack 5.6.1
    http://www.free-codecs.com/download/K_Lite_Mega_Codec_Pack.htm

Maybe you are looking for