Airronet 2700 for autonomous

Similar Questions

• Running a script for autonomous action

  Hello everyone, I just wrote this script for autonomous action and save it as GreetingApp.as
  package {}
  import flash.display. *;
  import flash.text.TextField;
  
  SerializableAttribute public class GreetingApp extends Sprite {}
  public void GreetingApp() {}
  Create a rectangle
  var rect:Shape = new Shape();
  rect.graphics.lineStyle (1);
  rect.graphics.beginFill (0x0000FF, 1);
  rect.graphics.drawRect (0, 0, 75, 50);
  
  Create a circle
  var circle: Shape = new Shape();
  circle.graphics.lineStyle (1);
  circle.graphics.beginFill (0xFF0000, 1);
  circle.graphics.drawCircle (0, 0, 25);
  Circle.x = 75;
  Circle.y = 35;
  
  Create a text message
  var greeting_txt:TextField = new TextField();
  greeting_txt. Text = "Hello world";
  greeting_txt.x = 60;
  greeting_txt.y = 25;
  
  Add assets to the display list
  addChild (greeting_txt); Depth 0
  addChild (circle); Depth 1
  addChild (rect); Depth 2
  
  Create a triangle
  var triangle: Shape = new Shape();
  triangle.graphics.lineStyle (1);
  triangle.graphics.beginFill (0x00FF00, 1);
  triangle.graphics.moveTo (25, 0);
  triangle.graphics.lineTo (50, 25);
  triangle.graphics.lineTo (0, 25);
  triangle.graphics.lineTo (25, 0);
  triangle.graphics.endFill ();
  triangle.x = 70;
  triangle.y = 8;
  
  Put the triangle in the circle.
  addChildAt (triangle, getChildIndex (circle));
  }
  }
  }
  I have the version of flash cs3, I don't know how to run this script file independent action? could you help me please
  Sincerely yours Mohsena

  you could make that your document class, but if you want to use more than once a GreetingApp instance, you will need to do more than that.

• Downgrade 1310 G for autonomous to LWAPP

  Hello world...

  I need help.

  I have an AP 1310 G with ' software Cisco IOS, software C1310 (C1310-RCVK9W8-M), Version 12.3 (11) JX1, RELEASE SOFTWARE (fc1).

  I need to configure this as autonomous AP to do a Site Survey, but the APs is reseting trying to record in WLC.

  I read some documents and the answer is this downgrade to IOS software, but it's running in LWAPP version, but I couldn't...

  What is the procedure?

  How can I configure this access point to set up a WLAN for this poll on the Site?

  Thank you...

  Here are the instructions...

  http://www.Cisco.com/en/us/docs/wireless/access_point/conversion/LWAPP/upgrade/guide/lwapnote.html#wp161272

• Getting 8.5.4 firmware for autonomous SIP Phone

  I have set up a 7962 as a standalone SIP phone to connect with the world. I downloaded 9.4 and it seems to obey me ok. But after starting, he spends a lot of time "Registration", then says "your current options. However, it has not registered. The error I had in the Console log is:

  "ccsip_register_send_msg: Error: cc_cfg_table is null."

  Search on Google, it seems that other people using 9.x also had the same thing and their only solution is to re - install 8.x

  I can't the older versions of CISCO, only 9.3 and 9.4. Thank you CISCO. Anyone know where I can get 8.5.4, which seems to be perfectly OK for a standalone install SIP.

  Thank you

  1. read the back of the phone to determine what version of the phone's hardware.

  2. do not bother with 8.5 (4) and play with the version shown on the SEPmacaddress.cnf.xml I posted.

• Recomendations for autonomous apex or glassfish server for 10 concurrent users thousands

  Hi all

  We are a medium enterprize with 15 thousand users.

  We intend to develop a mobile application using apex.

  I think that apex performs a dedicated connection to the database like oracle forms. so if 10 thousand users open mobile applications, this means that 10 thousand users are connected to the database at the same time.

  Am I wrong?

  If so, then let it be stand-alone mode would be able to serve in this case?

  How much RAM we required for such a charge?

  I would like to ask a question at a time, but these questions are a little research related to me, that's why I post in a thread.

  Thank you.

  Kind regards.

  Hi Maahjoor,

  We are a medium enterprize with 15 thousand users.

  We intend to develop a mobile application using apex.

  I think that apex performs a dedicated connection to the database like oracle forms. so if 10 thousand users open mobile applications, this means that 10 thousand users are connected to the database at the same time.

  Am I wrong?

  No, the session of the APEX is a dedicated connection to the database. Session of the APEX is independent of Session data, for each new request a database connection is created and abandoned when finished.

  If so, then let it be stand-alone mode would be able to serve in this case?

  What standalone mode are you talking about? Oracle remains Data Services (formerly APEX Listener) as a web server in standalone mode?

  If Yes, then it is not recommended to Oracle:

  Reference: running in stand-alone Mode that says:

  "Stand-alone mode is suitable only for development purposes and is not supported for use in production deployments. Use a taken J2EE application server supported for production deployments.

  You should always go for ADR deployed to one of the recommended Java EE application server. (Oracle Weblogic Server/Oracle Glassfish Server/Apache Tomcat)

  How much RAM we required for such a charge?

  The answer to this question is arbitrary. It is not only the RAM you should be concerned. It is on what architecture (hardware and software), you must go.

  This Article in Oracle Magazine by Mike Hichwa will help you: Browser-Based: Sizing Up Performance

  I hope this helps!

  Kind regards

  Kiran

• Question regarding setExtent and getPreferredWidth for the custom field

  I am trying to understand the difference between getPreferredWidth and setExtent, which relate to the width of a custom field.

  I create a field that may be greater than the width of the screen. The field is made up of cells (for example columns and lines or cells, such as a table). The cells contain text, shapes, lines, color, etc. When I display the field I only paint the visible columns on the screen and allow the user to use the trackball to accomplish the columns out of the screen.

  At present, getPreferredWidth returns the total width of the field without all the empty columns, is longer than the width of the screen. I use the same value in setExtent for width. GetPreferredWidth must return the size of the field that is painted on the screen - the total width less the width of the columns out of the screen? I have the same question about setExtent - width either in total, longer than the screen width or the width of the part of the field that is painted on the screen?

  If I use the width of what is painted on the screen or the other of these methods, then the width changes when the user scrolls through the field. As the user scrolls, I calculate the number of columns will agree to a width of the screen and paint these columns. Is it a problem to have the PreferredWidth and the setExtent change width? I read that setExtent is called only when the Manager sets this field, so that the changes will not be recognized.

  It seems to work in two ways in a few simple tests, but I was just curious as the value of width that is right.

  Thank you!

  Mark

  When a field has changed in a way that requires the update of the screen (for example, after scrolling offset changes), simply call invalidate() from this area. That will eventually lead to paint (Graphics) for the field. At this point, you return the update field. (If only part of a field - as a single cell - needs to be updated, there invalidate() versions that accept arguments where, for efficiency, you can limit the update for just this part.)

  If I understand your needs, you can achieve the effect desired in the paint method. You can use the current dimensions of the field, the cutting of the graphics area, and your internal roll compensates to decide what to paint and what to delete. Let your custom field leave white space where you decide of doesn't make is not part of a cell. There is no need to change the scope of the field.

  If you go about it by changing the dimensions of the field, and then you ask the system to play much more work he has to do. If the custom field is the only field on the screen, it won't make much difference in the behavior (although there may be performance). With more than one field, it can be weird effects. For example, suppose that your custom field is one of several fields in a HorizontalFieldManager and you change the field width. When the HorizontalFieldManager recalculates its own layout, it will change the horizontal position of the fields to the right. The effect on the user, I think, would be really confusing: as the custom field parade, parties to the right of the screen could bounce left and right as the changed width field. I can't imagine that's what you want.

  Here's another way to think about this: absent some bit of style, your custom field would prefer be exactly wide and high enough to show all without scrolling. So the width and height would be based on adding the appropriate cell widths and heights, regardless of what actually is on the display. (It's also a long time that you do not have something fanciful.) If the optimum height is a function of the width available - as with sheathed on the line of text - you would implement this logic in the layout method. You then have no use for autonomous preferred width and height).

• PSU for Oracle Restart 11.2.0.1 AIX 6.1

  Hi gurus,
  
  I applied the patch 9655006 IM for autonomous, i, e Restart.The Oracle patch knew very well, but changed ownership on the grid directory and permissions. The grid under /u01/app/11.2.0/grid directory should be owned by root, instead after his property by grid patch now.
  
  Let me breakdown the steps I made for the application of the patch.
  
  (1) unlocked the Gate House as root using the command 'roothas.pl - unlock'
  (2) patch applied PSU as user (grid) grid using opatch apply. The patch has been applied successfully.
  (3) I tried to lock the gate of the House using comand "roothas.pl - patch".
  command failed with error ' u01/app/11.2.0/grid/bin/crsctl[158]: /u01/app/11.2.0/grid/bin/crsctl.bin: cannot run.
  
  (4) tried roll back the patch with the "rollback opatch-id 9655006" command failed with error copy doesn't have to ' / u01/app/11.2.0/grid/.patch_storage/9655006_Jul_6_2010_12_27_31/files/bin/oradnssd' to ' / u01/app/11.2.0/grid/bin/oradnssd'...
  
  Gave 5) execute privilege recursively in GI-home / bin directory and restart Oracle stack came.
  
  My question is how the privileges has changed and safe / is it true the environment now after patch? What would be the impact of this on my existing environment?
  
  
  ls - ld /u01/app/11.2.0/grid
  drwxr-xr-x 66 grid oinstall 4096 12 August at 11:24 /u01/app/11.2.0/grid
  
  
  Please any entries would be really appreciated.
  
  Thank you

  Hello

  822424 wrote:
  Hi gurus,

  I applied the patch 9655006 of GI for autonomous I, e Restart.The Oracle patch knew very well, but has changed ownership on the grid directory and permissions. The grid under /u01/app/11.2.0/grid directory should belong to root, instead after patch its grid property now.

  Let me breakdown the steps I made for the application of the patch.

  (1) unlocked the Gate House as root using the command 'roothas.pl - unlock'
  (2) * applied patch PSU as user (grid) grid using opatch apply. The patch has been applied successfully.*
  (3) I tried to lock the gate of the House using comand "roothas.pl - patch".
  command failed with error ' u01/app/11.2.0/grid/bin/crsctl[158]: /u01/app/11.2.0/grid/bin/crsctl.bin: cannot run.

  (4) tried roll back the patch with the "rollback opatch-id 9655006" command failed with error copy doesn't have to ' / u01/app/11.2.0/grid/.patch_storage/9655006_Jul_6_2010_12_27_31/files/bin/oradnssd' to ' / u01/app/11.2.0/grid/bin/oradnssd'...

  Gave 5) execute privilege recursively in GI-home / bin directory and restart Oracle stack came.

  Did you read the README in the Patch?

  Automation for GI OPatch
  The utility (opatch) must be performed by a user of the operating system (OS) with root privileges (usually root user), and must be run on each node in the cluster.

  Patch Oracle Restart home
  Patch before the Oracle home Restart, hold the Restart Oracle stack upward and the conduct.
  To patch the Restart Oracle home, as an administrative user (usually the root user) run a command in the following format:
  #opatch auto - oh

  Then, with root privileges opatch unlock and relock the GRID_HOME automatically.

  This fix should be applied using an administrative user (usually the root user).

  My question is how the privileges has changed and safe / is it true the environment now after patch? What would be the impact of this on my existing environment?

  Did you backup of grid home before patch?

  Home of Oracle backup can be taken using any recommended method. You can use any tool such as zip, tar and cpio to compress the Oracle home. It is strongly recommended to make a backup binaries home Oracle while applying the patch Set (s) or patches. You should also back up the Central inventory where Oracle home is installed, while taking backup of the Oracle home.

  If you have a backup of Oracle Home you can restore all the files in the HOME of GRID (Oracle Restart) and apply the patch using root user.

  Kind regards
  Levi Pereira

  Published by: Levi Pereira on August 15, 2011 20:14

• Md3000i does not start

  I inherited a table MD3000i that is filled with disks SAS 7 x 750, a controller ISCSI and two power supplies. I can't reach the table using the Storage Manager. Don't check the network connections I get no indication on the management port or controller ISCSI ports. Connection series on the console I can not enter all commands and the screen scrolls the following text: ààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààà = =-fixation interface lo0 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa... done 9768 adding symbols for autonomous. ààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààà àààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààà = ààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààà =-fixation interface lo0... is 9768 adding symbols for autonomous. ààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààààà aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa = =-fixation interface lo0... the system is out of warranty, 60 days now. I have no data in the table that I care about, please help me get this thing up and run again. Best regards, Dan

  Hello Dan,.

  try to remove all the cables of the MD3000i and leave just the attached serial cable & see if that changed everything.  Also what you can try is to get out the controller on the MD3000i and wait for about 2 minutes then insert it with the system to check if the serial connection shows something new.  In addition, what are the colors of the LED at the front of the MD3000i?

  Please let us know if you have any other questions

• How to configure Cisco Telepresence SX 20

  SX20.PNG

  

  Looking for this topology please help me how I can configure SX 20.

  If you do a search in these forums for autonomous SX20, you'll see a lot of messages that describe how to configure a SX20 and required firewall ports.

  A good example is this: autonomous SX20

  Wayne
  --
  Remember the frequency responses and mark your question as answered as appropriate.

• I can do initialization SAN iSCSI on the server of the C series?

  I use C200 M2 with VIC P81E card and want to use iSCSI SAN for autonomous rackserver initialization.

  I read that the new rack servers support iSCSI with Broadcom adapter initialization, but not sure C200 with adapter P81E. If so, how to configure it?

  Thank you

  Hello Christian,.

  Currently, VIC P81E does not support iSCSI initialization. This feature is on the roadmap and provisionally available in December 2012.

  Padma

• Cisco's aPs do not broadcast complete device as part of Lighthouse name!

  Hi all

  We have more than 800 Cisco Aironet 1220, 1230, 1242 APs deployed in our society. I use AirMagnet to check the signal and do some job sniffers. What I've found, is that these Cisco APs do not send full device name. Say my name of the device's gw-cr-lap1242-rp4. what I can see of AirMagnet is only gw-cr-lap1242-r, the last two letters of p4 are cut. I also did the decoding. The length of the name of the HA and includes 30 bytes which is able to retain the full name, but since packets, AP sends only the name of gw-cr-lap1242-r and then fill the rest with the garbage room. It's embarrassing because we have gw-cr-lap1242-rp1,gw-cr-lap1242-rp2,... gw-cr-lap1242-rp32, etc.. I compare the MAC to locate the access point.

  Please see the pictures attached.

  Well, I understand it is a pain, but maybe you select 'L' for lwapp and 'A' for autonomous? you earn 2 characters.

  Why you can set up the long names: because it is also the host of the AP name, as it appears in the list of AP like this, because it is syslogged correctly.

  It is the extension of the CCX containing the name of the AP has a limit of 15 characters.

  I have no idea about the feasibility of this limit has increased. Perhaps a request for improvement of product with your account team could answer this question. I just noticed made :-)

  Kind regards

  Nicolas

• Differences between a WLC, WLSE and WCS

  Small question:

  I'm working on a proposal for a new WLAN infrastructure for a certain local government entities.  We use a Cisco WLC 5508.  I wonder what would be appropriate for additional management functions... Basically, I wonder if it would be wise to use a WLSE device... or is a WLSE basically a watered down Wireless LAN Controller?  I also read that the use of WCS is really large deployments... that I proposed would be 1142 32 laps with a WLC...  The client wants to know if there are tools or equipment and the benefits/disadvanteges both management software.  They want all these features... reports which told me in another post that WCS is what would be necessary for these functions.

  Thanks in advance!

  Cole

  WLC = wireless LAN controller.  It is a device of Layer2 AP will join and get their configuration and code.

  WCS = wireless control system.  It is a server on the LAN that uses SNMP for monitoring and the creation of models of the WLC.

  WLSE wireless LAN Solutions engine =.  This is used to monitor and model for autonomous AP.

  So, for what your customer is looking for, WLC 5508 need a WCS.  WCS is were all reporting will come from.

  See you soon,.
  Steve

  --

  If this helps you or answers to your question if it you please mark it as 'responded' or write it down, if other users can easily find it.

• 6248 FI console Configuration, incorrect subnet mask

  After clear console FI 6248 configuration and Setup...

  I didn't enter the subnet mask... No idea what went wrong?

  Enter the configuration method. (console/gui)? Console
  Usage: grep [OPTION]... MODEL [FILE]...
  Try "grep - help ' for more information.
  Usage: grep [OPTION]... MODEL [FILE]...
  Try "grep - help ' for more information.

  Enter the installation mode; the program installation newly or restore from a backup. (configuration/restoration)? Setup

  You have chosen to install a new interconnection fabric. Continue? (y/n): y

  Apply the password? (y/n) [y]: n

  Enter the password "admin":
  Confirm the password "admin":

  Is - this fabric of doing interconnection in a group (select 'no' for autonomous)? (yes/no) [n] :

  Enter the name of the system: FI

  Address IP Mgmt0 physical switch: 192.168.0.1

  Physical switch Mgmt0 IPv4 subnet mask: 255.255.255.0
  Incorrect subnet mask. IPv4 Mgmt0 physical switch subnet mask: form invalid IPv4. Must be of the form 'X.X.X.X', where each
  Letter match a decimal number between 0 and 255.
  IPv4 Mgmt0 physical switch subnet mask:
  IPv4 Mgmt0 physical switch subnet mask: 255.0.0.0
  Incorrect subnet mask. IPv4 Mgmt0 physical switch subnet mask: form invalid IPv4. Must be of the form 'X.X.X.X', where each
  Letter match a decimal number between 0 and 255.
  Physical switch Mgmt0 IPv4 subnet mask: 255.255.255.0
  Incorrect subnet mask. IPv4 Mgmt0 physical switch subnet mask: form invalid IPv4. Must be of the form 'X.X.X.X', where each
  Letter match a decimal number between 0 and 255.
  IPv4 Mgmt0 physical switch subnet mask:
  IPv4 Mgmt0 physical switch subnet mask: 255.255.0.0
  Incorrect subnet mask. IPv4 Mgmt0 physical switch subnet mask: form invalid IPv4. Must be of the form 'X.X.X.X', where each
  Letter match a decimal number between 0 and 255.

  http://jeffsaidso.com/2013/01/when-disaster-strikes/

  might be useful as well; just for next time :-)

• Smart call connector toolbar Info

  Hello

  I was wondering if someone could clarify some points of confusion that I have on the Toolbar from Smart connector call?

  Is it possible to have it search incoming numbers against Outlook contacts and display the correct name?

  I get the correct names if the number is in the directory, but I can't for the life of me configure it to use Outlook although the documentation seems to allude that it's possible.

  I use the latest version of the CSC independent x 32 client and Outlook 2007 (him button marked 'activate Outlook search' is checked) on Windows XP.

  Also, is the call connector free skilled man for autonomous use or don't each need a license use (we have a UC560)?

  Thanks in advance.

  Kind regards

  Alex

  Hi Alex,

  Smart CallConnector free toolbar has no research supported. The free version does not require allowing and basically can dial and click-to-dial. Other products CSC Adv-customer, operator of the CCS, CCS autonomous operator argued as long we have MAPI enabled and connected the right profile in the menu preference and many other search features.

  Thank you

  Team CallConnector

• LEAP and EAP-FAST in the same access point

  Hello...

  We have an infrastructure based on 1142 APs.  Now, they have set up an SSID with JUMP as an authentication mechanism.

  The infrastructure is not a wireless LAN controller, access points are configured as standalone APs with SSID configured in each of them.

  The mechanism to authenticate the windows with JUMP positions was a little tricky.  We need now to migrate all stations to EAP-FAST, but without loss of JUMP environment during the migration.   You have to configure the APs to serve the two authentication mechanism: LEAP and EAP-FAST.

  Is it possible to have it?

  What should we do about it?

  Thanks in advance...

  For autonomous APs. If you are using:

  Authentication open EAP protocol

  Network EAP-

  It accepts virtually all EAP types, not depends on the radius server to have all active... for example EAP methods, if you are using ACS may the PEAP LEAP EAP-FAST, EAP - TLS at the sametime...

  So no matter what, the customer's server and the RADIUS wireless must match the EAP type configured... any type of EAP, the AP should support it...