AIUTO PROBLEMA GRAND (f:\windows system32\logfiles\srt\srttrail.txt)

Similar Questions

• Repair C:\Windows\System32\Logfiles\Srt\SrtTrail.txt loop

  I recently bought an ASUS laptop with windows 8. The next day, I installed it says windows could not repair a system because of a file error.

  (C:\Windows\System32\Logfiles\Srt\SrtTrail.txt)

  After searching for several forums on my other laptop and try dozens of things, nothing helps.

  Can someone on a forum that is supposed to check the test file itself.

  Now I looked for the file on the laptop but, apparently, it does not exist.

  What should I do now? Can I get the file online or do I have to get a new laptop with windows 8?

  Additional info:

  I don't have windows 8 dvd. (it was a pre installation).

  I have no other pc/laptop with windows 8.

  Sincerely,

  Vinnie

  Hello

  Check with the support of ASUStek, their documentation and online to ask questions in the forums on
  known problems.

  ASUS - Service<-- includes="" live="">
  http://www.service.ASUS.com/

  ASUStek support
  http://support.ASUS.com/

  ASUStek Forums
  http://VIP.ASUS.com/forum/default.aspx?SLanguage=en-us

  ASUStek drivers
  http://support.ASUS.com/download/download.aspx?SLanguage=en-us

  =============================================

  This is the Startup Repair log file.

  Try to do a "Refresh your PC without affecting your files" (or modification of your personal data
  settings) or even a reset (which deletes the entire).

  Windows 8 includes special discount methods (keep files and settings) or a reset
  (new installation remove all).

  How to restore, refresh or reset your PC
  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

  How to create a system image to refresh your PC in Windows 8
  http://support.Microsoft.com/kb/2748351

  How to update Windows 8
  http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.html

  How to reset Windows 8
  http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.html

  If you need a repair disc:

  Create a system repair disc
  http://Windows.Microsoft.com/en-us/Windows7/create-a-system-repair-disc

  How to create a "system repair disc" (CD/DVD) in Windows 8
  http://www.eightforums.com/tutorials/2855-system-repair-disc-create-Windows-8-a.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• flow c0na050 PC-13: c:windows\system32\logfiles\srt\srtTrail.txt

  Any help with this will be great

  Hello

  I found this link that can help you

  https://answers.Microsoft.com/en-us/Windows/Forum/windows_8-update/help-Ive-encountered-the-srttrailtxt-problem/82c06748-855f-41CF-9cf8-6fe5724381e7?page=2

  If this does not help, you may need to recover PC to factory settings

• cannot repair / update my laptop error code: C:\WINDOWS\System32\Logfiles\Srt\srtTrail.txt corrupted file

  I recently bought a new laptop and was getting ready to update my video card drivers, when sudenly my pc hangs for more than 10 minutes. so I forceshutdown and me when I wanted to start my laptop windows said there is a problem...

  I tried to refresh / repair / recover windows but when I try to do these things my phone freezes and does nothing
  I need help

  Hello

  Please keep us updated.

  To run the Bootrec.exe tool, you must start Windows RE. To do this, follow these steps:

  1. Put the Windows 8 installation disc in the disc drive, and then start the computer.
  2. Press a key when you are prompted.
  3. Select a language, a time, a currency, a keyboard or an input method, and then clickNext.
  4. Click repair your computer.
  5. Click the operating system you want to repair, and then click Next.
  6. In the System Recovery Options dialog box, click command prompt.
  7. Type Bootrec.exe, and then press ENTER

  To do this, type the following commands at the command prompt Windows RE:

  • bcdedit/export C:\BCD_Backup
  • c:
  • Boot CD
  • BCD attrib s h - r
  • Ren c:\boot\bcd BCD.old
  • Bootrec /RebuildBcd

  Let us know if it helps.

• Problem loading c:\windows\system32\NvMcTray.dll

  When I connect my account these two pop-up windows.
  C:\windows\system32\NvCpl.dll and c:\windows\system32\NvMcTray.dll loading problem
  I scanned the computer with pc max speed. But when I press the fix all button program incounters an issue and stops?
  The program is only a limited trial and not paid.
  Hope you can help.
  Thank you.
  Steve

  I can't comment on your pc max speed problem, but you can solve your problem by reinstalling the NVIDIA drivers.

  Here are my instructions standard copy/paste of the JKB1687 article for your reading pleasure:

  If you are using an NVIDIA video system (whether on the motherboard or a supplement), the installation of the NVIDIA software added one or more startup items to launch the NVIDIA Control Panel.  They are set to launch and run whenever your system boots.

  If it worked before and you have made some system updates lately, something is messed up with it or your system has an affliction of malware.

  To see what commands look like, click Start, run and enter in the box:

  Msconfig

  Click OK to start the System Configuration utility, and then click the Startup tab to display the startup items.  You may need to drag the autour columns to see things better and like msconfig isn't a Boot Manager (this is a troubleshooting tool) you can't "make of the display is wider.

  Items with check box will be launched automatically once XP restarts.  With the checkbox elements are still "installed" but not set to start automatically every time you start XP.

  The NVIDIA partners start lines see you in msconfig Startup tab will look something like this:

  RunDLL32.exe C:\windows\system32\nvcpl.dll, NvStartup
  RunDLL32.exe C:\windows\system32\nvmctray.dll, NvTaskbarInit

  If the C:\windows\system32\nvmctray.dll or C:\windows\system32\nvcpl.dll files are missing somehow corrupted, inconsistent, out of date or wrong versions (maybe), when NVIDIA applications trying to launch, messages can appear like this (or even complain):

  Rundll32.exe - bad Image
  The application of the DLL c:\windows\system32\nvmctray.dll is not a valid Windows image.   Please check this against your installation diskette.

  RUNDLL
  Error loading c:\windows\system32\nvmctray.dll
  %1 is not a valid Win32 application

  If you don't think you use the NVIDIA Control Panel, you could simply disable the items is msconfig to prevent it to launch when you start your computer.  If you use Control Panel NVIDIA, deactivation of the elements and will leave your system without (perhaps not a good thing) NVIDIA Control Panel.

  You could just go ahead and disable the startup items in msconfig (deactivation does not uninstall anything), restart your system and understand the functioning of your system.  If things get worse, you can rerun msconfig and reactivate the NVIDIA elements, but I hope that you will not want to fix things the right way.

  Disabling items in msconfig is not really fix things and you will not have a NVIDIA Control Panel, but some people don't know what the NVIDIA Control Panel looks so can be good.  You will have stopped the message from popping up every time you start.

  If you want to use the features of NVIDIA Control Panel, you must repair or reinstall your NVIDIA software.

  The best way to reinstall the NVIDIA software is to visit NVIDIA support web page and let your system and recommend the best software for your system or that you get the right version of the software on their web page and download the latest package of video driver for your system software and install it yourself.

  It is recommended to run the scan NVIDIA with Internet Explorer.

  Here is the link to the support page NVIDIA for the scan:

  http://www.nvidia.com/download/Prescan.aspx?lang=en-us

  Read the instructions, and then click the GRAPHICS DRIVERS button to start the scan.

  Let online to take a look at your video system scanner them and see what he suggests for drivers and consider their analysis if they offer a new pilot.

  Download and install the recommended driver and restart your system.

  If following their indications do not straighten things, then follow these steps:

  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..
   
  Click Start, run and enter in the box:

  Msinfo32

  Click OK, and when the system information summary appears, click Edit, select all, copy and then paste the
  information here.

  For information about video drivers, expand components, click view, click on edit, select all, copy and then paste the information.

  This will minimize back Q & A and eliminate guesswork.

  There will be some personal information (such as the user name and the name of the system), and everything seems to be
  information private for you, just delete pasted information.

  When you have the time, I could do that too:

  Perform scans for malware, and then fix any problems:

  Download, install, update and do a full scan with these free malware detection programs:

  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  They can be uninstalled later if you wish.

• Under XP SP3. Cannot open IE7, both products to date. Get an error RUNDLL "PROBLEM OPENING C:\Windows\system32\inetcpl.cpl.

  Reciently recovered from a virus on the computer running XP.  XP RELOADED and upgrades and IE7 reloaded with all the changes.  Can use Outlook Express to receive and send email but no action all orders or addresses (eg.  has been unable to respond to your confirmation email.  had to use a separate machine Windows 7).

  Using the 2011 Kasperski antivirus protection software.

  Have deleted Google and fox, but don't know if remanents remain.

  At only 500 MB of RAM, lots of disk space.

  Have run CCleaner a dSuperAntiSpyware, without modification.

  Hello

  1. What is the type of internet connection you use on the computer?

  You can view these methods:

  Method 1:

  Check if the problem persists in mode safe mode with network mode and post back the result.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Method 2:

  Refer to the article below and run the Fixit tool available, check if it helps.

  How to reinstall or repair Internet Explorer in Windows 7, Windows Vista and Windows XP

  http://support.Microsoft.com/kb/318378

• I have this RunDLL error. There was a problem starting O:\Windows\system32\sshnas.dll the specified module could not be found.

  I don't see any change, but it's annoying.

  This file is a Trojan horse. The Trojan horse is set to run at startup but the file is missing now and that's why you get the error. You have removed the malware, or your antivirus/antispyware program did. In all cases, a reference has been left in the boot file. You can remove the reference by managing your startup.

  Because you had a piece of malware, the chances are too high you had others. It would be a good idea to scan with your antivirus with updated definitions and a good software like MalwareBytes antimalware program ' Antimalware (MBAM) from http://www.malwarebytes.org . The program is free. (There is a paid version, but you don't need to buy it to remove the malware).

  Once you are sure that your computer is now clean, rest boot entry you can delete:

  Start Orb > Search box > type: msconfig and when it appears in the results area above, right-click and choose 'run as administrator '.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue. Then see what is on the Startup tab. You don't need to restart immediately, but next time you do, you will get a dialog box saying that you have used the utility. Usually in Vista/Win7 it will be blocked by Windows Defender and you will need to enable it so you can then check the box that says in effect, "don't mind to this subject again".

  The free Autoruns program is very useful for managing your Startup - http://www.microsoft.com/technet/sysinternals/default.mspx MS - MVP - Elephant Boy computers - Don ' t Panic!

• Help! I encountered the problem of the SrtTrail.txt!

  My laptop with Windows 8 Pro 64 bit does not start correctly. Whenever I start the laptop, he tells me that I have a problem and it needs to restart. He will attempt to auto-repair system. I have installed on my machine BitLocker, encrypting my C:\, so he asks the recovery key. When I enter the recovery key trying to diagnose my PC. After a minute, I said that auto repair could not fix my PC, and the file that is causing the problem is C:\Windows\System32\Logfiles\Srt\SrtTrail.txt. I tried all of the advanced options, but they do seem to work after you use the loop is executed. Someone at - it ideas on how to fix this? The laptop I'm using a SONY Vaio Duo 11 Ultrabook and I I've had for about 2/3 months.

  I followed the steps to enter the command at the command prompt. When I do, I get the following message:

  The drive, the path or the file name is not valid.

  I entered in the following at the command prompt:

  Chkdsk/f/r X:C

  any other ideas?

  In fact, the command is chkdsk /f /r C: no X:C

• Error C:\Windows\System32\MMDevApi.dll

  Original title: System change plots Microsoft Windows

  WHEN CONNECTING FROM THE TOP HAS A MESSAGE... Several problems with C:\Windows\System32\MMDevApi.dll...it, and I can't solve

  Can someone help me?

  Hello

  1 have had any changes made on the computer before the show?

  2. what operating system is installed on the computer?

  3. when exactly you get the error message?

  4. what you try to connect?

  I suggest you check out the link to use the System File Checker tool (sfc) to troubleshoot missing or corrupted system files in Windows:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  If the problem is not resolved, please provide more information to help you best.

• Problem with bluescreen windows 7

  That's the problem I have

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.256.48
  Locale ID: 3082

  More information about the problem:
  BCCode: 50
  BCP1: FFFFFB800892362A
  BCP2: 0000000000000000
  BCP3: FFFFF80002D9339C
  BCP4: 0000000000000007
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 256_1

  Files helping to describe the problem:
  C:\Windows\Minidump\013116-28938-01.dmp
  C:\Users\versos\AppData\Local\Temp\WER-37081-0.SysData.XML

  Read our privacy statement online:
  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:
  C:\Windows\system32\en-US\erofflps.txt

  suggestions for this problem!

  We need the log files themselves (called a DMP files) because they contain the only record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.
  Please follow our instructions to find and download the files, we need to help you fix your computer. They can be found at here
  If you have any questions regarding the procedure, please ask

• Can someone help me solve the problem APPCRASH on Windows 7? The problem occurs after installation of Office 2010

  Hi all

  the OS is Windows 7 SP1 32-bit Enterprise Edition.

  I use an important banking software package called ORF more than Misys, the application is critical for the company, the problem occurs after the installation of Microsoft Office 2010 Professional Plus with Service Pack 2; the ORF more crashes when you try to print to a PictBridge compatible printer.

  I get the following message from crash:

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: orfplus.exe
  Application version: 5.0.1.0
  Application timestamp: 3f6f479b
  Fault Module name: StackHash_802d
  Fault Module Version: 6.1.7601.22436
  Timestamp of Module error: 521eaab0
  Exception code: c0000374
  Exception offset: 000c38b7
  OS version: 6.1.7601.2.1.0.256.4
  Locale ID: 2057
  Additional information 1: 802d
  More information 2: 802d0d721d077b7993d17470b8164201
  3 more information: d6a2
  Additional information 4: d6a2e9e6b15ae70428294b9407d7e88d

  Read our privacy statement online:
  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:
  C:\Windows\system32\en-US\erofflps.txt

  ----

  I tried to exclude the orfplus.exe of the DEP, but that does not solve the problem, the application always crashes when I try to print a report.

  ----

  As a result, we are unable to upgrade our office staff of Office 2010 Professional Plus application.

  I appreciate if someone can help me solve this problem.

  Thanks in advance.

  Hello Matt,

  According to the issue description, it seems that you are connected to a network domain, so I suggest you to republish your query on the TechNet forum and I hope that you will receive a response it a better way that they are trained on the computers in the domain and their settings.

  http://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro

  Thank you.

• Problem with the translation into Chinese of msgrte.txt

  With the help of LabWindows/CVI 2012 SP1.

  I am trying to create a Chinese version of one of our applications. I have a msgrte.txt that has been translated into Chinese, and I ran countmsg.exe on update magic numbers. Countmsg.exe reports of success, and the numbers are changed.

  I replaced the following files with the new msgrte.txt for testing purposes:

  C:\Windows\SYSWOW64\cvirte\bin\msgrte.txt

  C:\Windows\SYSWOW64\cvirte\bin\msgrt4.txt

  C:\Windows\System32\cvirte\bin\msgrte.txt

  When I run the application, it blocks (unrecoverable error) whenever I do anything that requires the text in this file, for example a FileSelectPopup.

  If I use the standard version of English to msgrte.txt, the application works OK (though of course the standard popup panels have English text).

  An inspection of the eyeball of the msgrte.txt translated shows anything special on the file.

  Locale system is set to Chinese (simplified, China).

  Anyone has any ideas to identify the problem?

  I promised to report when a solution is found, so here it is:

  It turns out the format of at least some of the messages in msgrte.txt is critical and will result in the application crash if it is not correct. In my case, the message:

  1331 ' __All files (*.) " *)... »

  has been translated with a missing space character, that is to say (the Chinese equivalent of):

  1331 «files __All...»

  This message appears to be used as a filter in FileSelectPopup (and FileSelectPopupEx) specifier, so the space between the description and the designation of generic character is important.

  So if you translate msgrte.txt, be careful! If, like me, you find it translated by a third party in a language you don't understand, be doubly careful

• While trying to install Zone Alarm, I got a problem of uninstalling 32 encountered error could not find c:\windows\system32\vsutil.dll, install error # 127

  While tring to install zone alarm error message uninstaller 32 met problemcould, I received not find c:\windows\system32\vsutil.dll must close this happened during the configuration after installation error # 127 {2abf85a 2abf792 2abf856} program za installed on the other 2 computers very well I think it's a problem with this computer windows

  Original title: help please

  Support for contact Zone Alarm. It's their product.

• IDT Audio system tray app has encountered a problem - sttray.exe and lack of Windows\system32\spool\drivers\w32x86\3\DLCJtime.dll entry: RUNDLLEntry at Windows startup.

  Dell Dimension E510 system was crushed by a virus. The files were dumped, authorized reader and a reload fee system has been done. When all files have been charged and the system is recovered, the following errors began to appear at startup:

  -IDT Audio system tray app has encountered a problem - sttray.exe and

  -Windows\system32\spool\drivers\w32x86\3\DLCJtime.dll Missing entry: RUNDLLEntry

  I'd rather be able to clear these by using the operating system disk I hope it do not screw the system. Any ideas would be nice.

  Thank you

  Dennis Holmquist

  Hi Dennis,

  DLCJtime.dll part of your Dell printer drivers. If you have or had a Dell printer, then re - install printer drivers / should solve the problem.

  Reinstall the printer. In addition, install the latest drivers from the manufacturer's Web site.

  To connect a printer directly to your computer

  Remove a printer

  See also:

  Microsoft Windows XP - add a printer attached to your computer

  RUNDLL error message

  For IDT audio error, you can install the latest audio drivers from the Dell support Web site to see if it helps.

• C:\windows\system32\xpsviewer error opening message has encountered a problem and must be closed.

  I am trying to open MS C:\windows\system32\xpsviewer, currently running on MS XP Professional.

  Get an error message whenever I try to open XPS.

  The message reads "XPSViewer.exe has encountered a problem and needs to close. We are sorry for the inconvenience ".

  I tried looking for the answer, but they seem to relate to MS Vista or 7?

  I wasn't sure what I should put it in so I chose programs?

  Best regards

  Anthony Tidey

  I would like to uninstall the XPS Viewer, then download and install a new copy.

  I don't know where you got your copy of Microsoft XPS Viewer, but it was packaged with XPS Writer in the Microsoft XML Paper Specification Essentials Pack

  I have not downloaded this, but I think that you don't have to install the XPS writer if you do not want to.