Similar Questions

• The FEP Server alert notifications do not display the correct time zone

  Time stamps FEP report

  When I receive my FEP Server alert notifications timestamps are far away. Nobody knows how to set the correct time zone, so the report will be accurate?  I think that the default time is UTC.

  Hello

  If you are referring to serve Advanced Endpoint Protection, I suggest you to report the issue in the link below:

  http://social.technet.Microsoft.com/forums/en/category/forefront

  I hope this helps.

• Alert Notification SAN HQ

  Hello team Dell,

  Had this error: hope you can help

  This message was generated by the service Dell EqualLogic SAN headquarters (version 2.5.0.6470) running on SaNHSVR

  The following conditions on the group EQL (MailScanner WARNING: digital links are often malicious: 150.xxx.xxx.x19) generated an alert notification:

  Warning conditions:

  • 23/07/2016 01:04:26 to 26/07 / 2016 09:02:46
    • [ID: 1.6] The Group EQL was added by using non well known address (MWKA). Delete and add the group using the well-known address 150.xxx.xxx.x21 management group.
    • The Group EQL was added by using non well known address (MWKA). Delete and add the group using the well-known address 150.xxx.xxx.x21 management group.
    • Condition has already generated an e-mail message. If the problem persists, additional messages will be sent approximately once every 6 hours.
  • 23/07/2016 07:16:20 to 26/07 / 2016 08:09:19
    • [ID: 3.23] ATTENTION: Network member EQL01-FLC Port isn't reachable.  Unable to get network for Member performance data.
    • Condition has already generated an e-mail message. If the problem persists, additional messages will be sent approximately once every 6 hours.

  NOTE: To customize the e-mail notification to alert launch an instance of the customer SAN seat then:

  1. Click on the 'Settings' button, then select "e-mail settings."
  2. Select the tab 'Notifications '.
  3. Select the group to edit.
  4. The upper part of the checkboxes allow enabling/disabling of all alerts in a specific category.
  5. The selection of the bottom contains allows enabling/disabling of individual alerts.
  6. Click on the "Apply" button to save the changes to this group or all groups.

  Hello

  You are running a very old version of SANHQ.   The current version is v3.2.

  The first error is quite simple, it seems that the incorrect IP address was used to add to this group.   What the dedicated management interface configured once it has been added to SANHQ?

  The 2nd error could be a connectivity issue, old SANHQ, old EQL FW or table was very busy at the time.  It could also be linked to the incorrect configuration error if errors refer to the same group.

  What a picture of model and firmware currently running?

  Kind regards

  Don

• Annoying Alert Notification SNMP SAN HQ

  Maybe if I add the email address of Mr Dell'Alba to this alert. Stop the madness. -This message was generated by the service Dell EqualLogic SAN headquarters (version 3.0.0.7189) running on vcenterserver.kembacu.org the following condition on WESTCHESTER (192.168.50.16) group has generated an alert notification: critical conditions: * 5/15/2014 13:39:37 * [ID: 14.2] could not establish the connection. * The HQ SAN server issued the group SNMP requests, some or all failed. This condition is probably due to the congestion of the network or has no network connectivity. The server will try again in 60 seconds. Check your network connectivity and that the storage group is online. If the problem persists, contact your Dell support provider. NOTE: In order to customize the email alert notification launch an instance of the customer SAN seat then: 1. click on the 'Settings' button, then select "e-mail settings." 2. Select the tab 'Notifications' 3. Select the group to edit. 4. the upper part of the checkboxes allow enabling/disabling of all alerts in a specific category. 5. the selection of the bottom contains allows enabling/disabling of individual alerts. 6. click on the "apply" button to save the changes to this group or all groups.

  Uncheck the event ID 14.2 (under review) and apply the change to all your groups... Please keep in mind that a restart of the service is necessary for entry into force of the amendments.

  Kind regards

  Joerg

• TPServer 8710 - Custom conference ending the notification text does not

  Hi all

  in our network, we have 8710 TPServer and etc.

  the "Conference of custom ending the notification text" does not work

  What do you advise?

  tkanks a lot.

  Hi Onur,

  We have therefore 3 numbers

  Conference custom ending the text of the notification, notification of CTS - Man 10 minutes and 2 minutes of GST.

  This should be no Rendevouz for meetings,

  -What version of CTSMAN?

  -Do you see the BBFRR in CTS?

  -See you BBFRR in C20?

  -Do you think the meeting scheduled in CTS - Man?

  -When in the conference can you send a normal text to CTS?

  For one of the question:

  Use of conference custom ending the notification text

  Ending Conference custom notification text

  End notification text Customer conference

  If you check the help:

  Use custom Conference end notification text allows the telepresence server to use a personalized message to warn participants that the Conference ends.

  The telepresence Server uses a message by default unless you check and write a personalized message. The default message is that this conference is about to end.

  Does not apply to the Cisco CTS endpoints.  See the reference endpoint interoperability for more details

  -Gonzalo

• Customization of email alert notifications

  I was asked to change the verbiage of the e-mail alert notifications.  Is this possible?
  
  For example, we are currently receiving the following when the availability of a server changes:
  
  Subject: [HQ]! -[name of alert] [resource name]
  
  Message:
  [resource name] has generated the following alert:
  [name of alert] [resource name] Availability (0.0%)
  
  ----------------------------------------------------------
  RETAIL ALERT
  -Name of the resource
  -Name alert
  -Description alert
  -To attract the attention of Date / time
  -One or more trigger conditions
  -Alert severity
  
  Final metric indicator collected
  
  Can it be replaced by a message personalized, such as
  
  Subject: Database server has changed the availability status
  
  Message:
  Availability on the database server changed (0.0%).  Please review and, if necessary, log a ticket: [internal help desk URL]
  
  ?  Thank you

  Yes, it is possible. There are some documents to http://support.hyperic.com/display/DOC/Tailoring+Alert+Notification+Templates

• Emil Alert Notification

  I've created a form that end-users can submit via acrobat.com. Is it possible to have a script to report to the administrator of form (myself) a form has been submitted by a user as Asa soon they hit the submit button? Other possible solutions in what concerns the generation of an alert notification by e-mail with a script? Thank you in advance for your help!

  If you are unable to install a script on the local computer, and then you can not do

  in silent mode.

  There may be a possibility to go to Acrobat.com, but I'm not very

  familiar with this service. You might want to try the forum for it.

• Text & Email alerts/notifications during a vibrate mode?

  Hello people! I just took the Motorola Droid this weekend and I'm having a problem with something... so here and I hope someone can help me with this question:

  While my phone is on vibrate, how is it that whenever I get a new SMS, gmail or facebook to update my phone only vibrates? All I get is a flashing that lets me know I have a new text or e-mail, but other than the light, there is no way for me to know that I have a new message.

  If my phone vibrate and someone calls me, the phone starts vibrating... but not when I get new messages... as I said, on the phone light will start to blink, but the phone vibrates to let me know I have a new message.

  I don't understand.. with my old phone (travel) when it has been set to "Vibrate" mode, the phone vibrated both when I received a call or SMS, but not my Droid. I looked in the 'manual' together and I wasn't able to find anything about alert messages and how to set up different types of notifications. So right now, I'm stuck looking at my phone from time to time to see if I have new messages. I received some messages while I got the phone on vibrate attached to my waist and I didn't know people had texted me because there was no sound or vibration notification type.

  Anyone has an idea how to set up the phone vibrates when receiving new messages when the phone is on "vibrate"?

  THANK YOU MUCH IN ADVANCE!

  under the settings of your email (I use gmail), there is a setting to vibrate when the message or something like that. and should be somehting similar to your e-mail. If these values are defined, then it still vibrates when a text or an e-mail arrives that you are on silent or not.

• Message from blackBerry & Smartphones Email alert notification - need help!

  Hi all

  I turned on my 9300 the other SIMs day and I received a new text message on it that I read & deleted...

  I then put in my old SIM and the alert at the top of the screen (1 envelope) which notifies you when you have a new message is still there!

  I have deleted all messages, emails, checked all folders, saved files, restarted (hundreds of times!), but the notice is still there.

  It obviously isn't a major problem, but I find it incredibly annoying!

  Any help to solve the problem would be greatly appreciated!

  Hi spl5fm,

  Welcome,

  On your homescreen go to message, go on a date box says say today, then press the Menu button > scroll down and click "mark prior reading. and then do a restart of battery as lthis pull: power to the device on remove the battery, wait for a min. then reinsert and wait until it reboot, see if she's still there.

  Good luck

  Prince

  Click 'Like' If you want to thank someone.

  If problem resolves mark message (s) as a 'Solution', so that others can use.

• How do you default Center widgits instead of alerts notification

  With the new update iOs 10 on my iPhone 6 s, the (ample down from the top) notification defaults to the display screen alerts.  Is it possible to have by default the widget screen instead?

  Sorry, but this isn't an option in the iOS. You can get on-screen widget directly from the home screen by sliding from left to right, all by dragging up and down poster notifications screen.  No gesture is editable.

  Or you can submit your ideas to Apple at http://www.apple.com/feedback/

• Alerts/Notifications however not passed to watch calendar

  I scoured the forums and I have yet to find a clear answer to my problem.

  I get all my phone calendar alerts to my Apple Watch. I have 'mirror iphone' lit. I have notifications on the value in the phone settings. I'm the calendar reminder (alerts) 5, 10, 15 minutes before the event very well on the phone itself, but never pushes at my watch. The phone is not on or unlocked when alerts expected (should) come through.

  I have NO problem get any other phone notification/alerts to look outside the calendar. I use the stick ical app on iphone.

  Any help would be appreciated.

  Hello

  It may help to try these settings:

  -On your iPhone, in the application of Eve, go to: My Watch (tab) > calendar > choose custom and turn on all the options available.

  Otherwise, it can help to restart your iPhone and your watch:

  -Turn off the two devices together, and then restart your iPhone first.

  -To switch off your watch: press and hold the button side until you see the cursor off the power; slide it to turn off;

  -To reactivate: press and hold the side button until you see the Apple logo.

• BACKFLIP: Where is... Led notification and Alerts notification for Facebook/MySpace?

  I have a few questions. My first question is, I have a lot of apps that say they can warn my by LED light. I put it to inform me, but when I get a text or message twitter the led lights. The circle of the speaker a light? If so is there a setting I have to go to?

  My second question is, are there not facebook and Myspace apps which will inform you actually when you receive something. (message, friend request). I have not a single notification since Ive had the apps.

  Any help will be greatly appreciated.

  1. the phone has not built in LED indicator. The circle you are referring is the light sensor. It is the sensor that helps auto adjusts the screen backlight according to surrounding it.

  2. for FB and Myspace notifications, you have two options: a) check your settings online within the FB and Myspace on PC site and allow notifications no longer pushed to your email or text or b) download the official FB and Myspace application on the market. These applications have built in notifications. I suggest you go with option A as option B consumes more battery. It is preferable that you play with the first two methods to find which suits you best.

• Continuous Alert / Notification until the confirmation

  I have been working on this for awhile and tried several methods.  I have an application where the data is pushed to the device.  If it's a specific set of data, then a notification/alert must be activiate until the user acknowledges the message.

  I display a message alert/notifcation using a call from global message with an OK button.

  public static void displayGlobalMessage(final String gMessage)
      {
          UiApplication.getUiApplication().invokeLater( new Runnable() {
                  public void run() {
                      UiEngine uie = Ui.getUiEngine();
                      alertDialogListener  closeListener = new alertDialogListener();
  
                      Dialog screen = new Dialog(Dialog.D_OK, gMessage, Dialog.OK,
                                                  Bitmap.getPredefinedBitmap(Bitmap.EXCLAMATION),
                                                  Manager.VERTICAL_SCROLL);
                      screen.setDialogClosedListener(closeListener);
                      uie.pushGlobalScreen(screen, 1, UiEngine.GLOBAL_MODAL);
                  }
          });
      }
  

  Is what I have to do, when the message is to show that the phone should vibrate and play a melody (or kick off a past profile).  Keep playing and vibration until the user clicks the OK button.   In addition, the user can also receive multiple messages, so I need to make sure that the phone won't crash with multiple instances of the function vibrator + tune will.

  I tried to use an AlertListener, but I could not shutdown notification or contiuosly replay.

  I just tried to do a timer event to play, wait and repeat the alert.

  StartScreen._pagingTimer.scheduleAtFixedRate( StartScreen._pagerTimerTask, 0, 10000);
  

  But, when I cancelled the TimerTask in CloseDialog Listner, I get an error when the following alert message is pusehd unit.

  Error! In Main Screen, toString=java.lang.IllegalStateException: Task already scheduled or cancelled[0.0] , Message=Task already sched[0.0] uled or cancelled
  

  I have serached the forum to get examples, but have not found one that works for what I'm trying to do.

  Thanks in advance for help on this issue.

  I went back to the use of the AlertListener and go to work.

  I posted my code on my blog, incase someone wants an idea of how I got it to work.

• Sounds of Smartphones blackBerry for alerts (email, text and voicemail)

  Forgive my ignorance, this is all very new to me. Where can I find (other than the selection of the plant) different sounds to alert the type of message that I get. For example, my friend's phone yells "Mail mofo" when it receives a text message, something else when he receives an email and then something else when he receives a voice message.

  Assuming that someone will direct me in the right direction, how do I download and install these?

  Thank you

  OLE

  check out this LINK

  There are tons of free ringtones, so that you can make your own

• Alerts by texting blackBerry Smartphones

  Is it possible to change the alert you get when you receive a text message?

  Is it possible to do individually? I tried to follow the directions on the previous thread, but still cant seem to master that.